Beli Defensor 6002 Humidifier Hingga 1.200 M³ bekas (72.416)

Kondisi: bekas, Humidifier Defendor model 6200 Tegangan: 220 V - 50 Hz Kapasitas: hingga 6/7 liter/jam Gusdpfx Aaozb A Rtszof Jangkauan kerja: hingga 1200 m³ Volume udara tersedot: 800 m³/jam Konsumsi daya: 180 watt 260 VA

Kondisi: baik (bekas), Tahun pembuatan: 2014, Kira-kira 1.200 m2 area gudang / lantai antara, kapasitas beban 500 kg/m2, - bekas -: Harga mulai dari lokasi: hanya 69.500 € (belum termasuk pajak), termasuk pembongkaran, pengepakan, dan pemuatan! Hanya sekitar 58 € (belum termasuk pajak) per m2!! Produsen: Stow Gujdjzqz Ibepfx Aazef Tipe: Area gudang Tahun pembuatan: 2014 Tinggi bagian bawah (tepi bawah penyangga): kira-kira 5,38 m Tinggi keseluruhan: lantai: kira-kira 5,76 m Lebar/kedalaman: kira-kira 17,60 m + kira-kira 0,80 m tonjolan Kira-kira 5 penyangga di bagian kedalaman, sebagian 32 profil-C, sebagian kira-kira 17 profil-C Jarak penyangga di bagian depan kira-kira 3,70 m / 3,35 m / 5,45 m / 4,73 m Panjang: kira-kira 69 m Kira-kira 19 penyangga di bagian panjang Kapasitas beban: 500 kg/m2, sebagian 350 kg Lantai: papan serpih 38 mm, bagian atas berwarna abu-abu muda, bagian bawah berwarna putih Termasuk pagar yang ada, pelindung penyangga, Kondisi: baik, pemeriksaan sangat disarankan! Tersedia: mulai kira-kira kuartal ke-4 tahun 2026 Lokasi: Hamburg

Kondisi: baik (bekas), Dalam cakupan pengiriman termasuk: 1x Rangka penopang dalam, bekas Warna material: seng Sendzimir Panjang keseluruhan: sekitar 1.250 mm untuk kedalaman rak: 1.200 mm jarak penyangga bersih: sekitar 1.100 mm penyangga palang: sekitar 50 mm sudut penyangga: L: sekitar 80 x 80 mm lebar keseluruhan: sekitar 860 mm lebar bagian dalam: sekitar 855 mm Godpfx Aasr Dr Suozouf ketebalan material: sekitar 3 mm Rangka samping: Panjang: sekitar 1.245 - 1.070 mm bagian depan miring Lebar: sekitar 200 mm Tinggi: sekitar 195 mm Penyangga ujung: Lebar: sekitar 200 mm Tinggi: sekitar 195 mm Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Ini adalah produk bekas, mungkin terdapat goresan, penyok, dan tanda-tanda penggunaan. Produk ini hanya ditawarkan untuk pengambilan langsung. Jika diperlukan pengangkutan atau pengiriman produk ini, akan dikenakan biaya tambahan, yang akan ditanyakan secara terpisah tergantung pada lokasi pengiriman atau cakupan pengiriman.

Kondisi: sangat baik (bekas), Here we offer you a Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam Humidifier Defensor Mk5 The Defensor Mk5 steam humidifiers are designed according to the latest technical standards and recognized safety regulations. Nevertheless, improper use of the Defensor Mk5 steam humidifier may result in hazards to the operator and/or third parties and/or cause damage to property. To ensure safe, proper, and economical operation of the Defensor Mk5 steam humidifier, please observe and follow all instructions and safety notices in this installation and operating manual. Defensor Mk5 Series Visual For indirect or direct air humidification in rooms with standard control accuracy requirements. Defensor Mk5 Visual double unit large 80 Max. steam output in kg/h: 80.0 400V/3~/50...60Hz Mk5 ... 80 Gedpfxszd Uk Ns Aazsuf Unit A: 40 kg/h Unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) We are happy to answer any further questions by phone.

Kondisi: baik (bekas), Included in delivery: 01x rear wall mesh panel, used Material color: cream white Total width: approx. 2,200 mm Total height: approx. 1,200 mm Mesh size: approx. 60 x 50 mm Frame profile dimension (width): approx. 20 x 20 mm Guodpfxsm E I Nvj Aazef Frame profile dimension (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight per piece: approx. 8.14 kg Internal designation: RW-2

Kondisi: baru, GMN TSAV 40x315 - 6002 L 253066 SP: 7900-13000 rpm. Spindel penggiling, belum pernah digunakan dalam kemasan asli yang sudah dibuka, 100% berfungsi, ruang lingkup pengiriman sesuai foto Guodpfx Aji D U Uzjazsf

Kondisi: baru, 🧰 Fitur Produk • Kondisi: Barang baru • Warna: abu-abu • Material: Logam • Dimensi luar: 124 x 83,5 x 97 cm • Dimensi dalam: 120 x 80 x 80 cm • Kapasitas beban: 1500 kg • Kapasitas beban saat ditumpuk: 6000 kg • Berat: 78 kg Gjdpfxsdiyhxe Aazouf • Sisi depan: dapat dilipat • Dasar: dasar logam dengan lapisan kayu 💰 Harga € 149,- (belum termasuk PPN) mulai dari 50 unit € 129,- (belum termasuk PPN) • Diskon kuantitas: berdasarkan permintaan • Biaya pengiriman: berlaku di seluruh Eropa, berdasarkan permintaan • Waktu pengiriman: Tersedia segera • Inspeksi dan pengambilan: dapat dilakukan kapan saja setelah perjanjian Selalu tersedia lebih dari 5000 meter rak palet dari berbagai produsen (Perubahan dan kesalahan dalam data teknis, spesifikasi, dan harga, serta penjualan antara waktu, dicadangkan! Lihat Ketentuan dan Persyaratan kami, semua harga belum termasuk PPN, mulai dari gudang.) Lenox Trading – Penyedia teratas untuk peralatan penyimpanan & rak beban berat, bekas & baru Teks deskripsi: Apakah Anda mencari rak penyimpanan berkualitas tinggi untuk dibeli? Lenox Trading, dengan sekitar 100 karyawan, adalah salah satu distributor terbesar untuk peralatan penyimpanan baru dan bekas di seluruh wilayah DACH (Austria, Jerman, Swiss). ⚡ TERSEDIA SEGERA: • Lebih dari 10.000 meter rak tersedia untuk pengiriman segera • 20.000 m² platform penyimpanan & platform konstruksi baja tersedia segera • 30–50 truk trailer setiap minggu untuk rotasi barang, memastikan pilihan yang maksimal 📦 RANGKAIAN PRODUK KAMI (BELI SECARA ONLINE DENGAN HARGA TERJANGKAU): Baik itu rak palet, rak beban berat, rak tinggi, rak rak, rak ban, atau rak untuk wadah IBC – kami menyediakan dan memasang di seluruh Eropa dengan tim KAMI SENDIRI! Termasuk perencanaan CAD, transportasi, pembongkaran, dan pemasangan. 🏭 MERK TERBAIK, BEKAS & DARI LIKUIDASI / PROSES KEPAILITAN: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Tipe MPB, Tipe E, rak beban berat Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Rak lengan kantilever (Rak lengan kantilever Elvedi, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 BISNIS KAMI YANG LAIN: LELANG ONLINE & LIKUIDASI Untuk pembongkaran dan pekerjaan pembersihan, kami menawarkan paket layanan lengkap: 1. Pembelian sekaligus: Pembelian barang dagangan, perlengkapan & seluruh stok gudang termasuk pembersihan menyeluruh. 2. Lelang komisi: Melaksanakan lelang atas nama pelanggan. Layanan lengkap kami oleh karyawan kami sendiri: Katalogisasi, penyiapan kantor, inspeksi, penyerahan barang, logistik, pembongkaran, dan penyerahan bersih. Baik Anda mengetahui kami melalui rak beban berat atau mencari rak beban berat yang dilapisi seng / sistem rak beban berat – kami menjamin kondisi terbaik. Hubungi kami untuk mendapatkan penawaran tanpa kewajiban!

Kondisi: baik (bekas), 1 pc. Jaw crusher Metso / Lokomo MK 120. 1,200 x 900mm. Including feed hopper. With drive unit. Supplied with spare parts: toggle plate, flywheels, jaws, cheek plates, bearings, springs, etc. Gusdpfxolf Iqcj Aazjf For more detailed information, please refer to the PDF below.

Kondisi: baik (bekas), Kontak person Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Gedex Huh Ajpfx Aazsuf Bapak: Falk Deutsch Informasi umum tentang barang: Barang ini hanya ditawarkan untuk pengambilan di tempat. Jika pengiriman atau transportasi barang ini diinginkan, biaya tambahan akan dikenakan, yang dapat diinformasikan secara terpisah tergantung pada lokasi pengantaran atau cakupan pengiriman.

Kondisi: baru, en-GB Gedpjhq Txhjfx Aazeuf

Kondisi: baru, We offer here a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery includes: 02x workbench frames, new Material finish: fully galvanized Frame type: TS4 including cross and diagonal braces, base plates The frames are pre-assembled (bolted lattice construction) 888 mm high 700 mm deep 04x workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material finish: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelf panels, new Dimensions: 300 x 700 mm Type: H29/D 01x angle set, new for fastening the worktop 08x safety hooks, new Material finish: fully galvanized Gsdpfxohq Twye Aazsuf

Kondisi: baru, We offer here a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 – 4 weeks Technical Data for the Workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Godpshq Txwefx Aazeuf Scope of delivery includes: 02x Workbench uprights, new Material finish: fully galvanized Upright type: TS4 including cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) Height: 723 mm Depth: 700 mm 02x Workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material finish: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimension: 900 x 1,200 mm Color: black 02x Swivel castors, new 02x Braked swivel castors, new 01x Angle set, new for worktop mounting 04x Safety hooks, new Material finish: fully galvanized

Kondisi: baru, We offer here a new workbench from the manufacturer Metal Sistem for purchase. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Model: Super 4/5/6 Workbench width: 1,200 mm Gusdpfx Aashq Tqdezef Workbench depth: 900 mm Workbench height: 900 mm Scope of delivery: 02x workbench uprights, new Material finish: fully galvanized Upright type: TS4 Including cross- and diagonal-braces, base plates The uprights are pre-assembled (bolted truss design) Height: 888 mm Depth: 700 mm 02x workbench beams, new Beam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material finish: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Color: black 01x angle bracket set, new For fastening the worktop 04x safety hooks, new Material finish: fully galvanized

Kondisi: baik (bekas), en001-trans-01 Gjdpfx Ajvmzxcsazjuf

Kondisi: baik (bekas), We offer here a second-choice collision protection guardrail for purchase. Scope of delivery includes: 01x collision protection guardrail, second choice Material color: yellow/black/galvanized Total height: 400 mm Total depth: 180 mm Clear width: 1,200 mm Comprising: 01x CS sigma profile, second choice Material color: Sendzimir galvanized Profile dimensions: C 300 x 75 x 2 mm Length: 1,100 mm 02x L-shaped collision protection corners, new Material color: yellow/black According to DIN standard Total height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Weight/piece: 6.10 kg 08x bolts: M12 08x nuts: M12 16x washers: M12 The collision protection guardrail is delivered fully pre-assembled. Gujdpfx Aaohpub Aozef General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be provided upon request depending on the delivery location and scope of delivery.

Kondisi: sangat baik (bekas), Technical data for the order picking rack: Racking system: Dexion Type: HI280 Installation technical data: Number of racking rows: 01 unit Rack length: approx. 1,340 mm Number of bays per row: 01 unit, each 1,290 mm Number of levels incl. ground level: 06 units Note: The advantage of a packing table or an order picking rack is that all the necessary tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. cross and diagonal braces Weight per piece: approx. 5.50 kg The frames are pre-assembled 1,200 mm high 610 mm deep 06x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x Levelling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x Shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 units Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x Open front storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions (LxWxH): 500 x 156 x 143 mm Gsdsn Smvhspfx Aazsuf Internal dimensions (LxW): 448 x 123 mm Weight per piece: approx. 0.785 kg 01x Load sign showing bay and shelf load capacities, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As these are used goods, damages, rust spots or similar defects may be present. General information about the item: This item is offered for collection only. Additional transport or shipping of this item can be arranged at extra cost, which can be quoted separately depending on delivery location and scope.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Gujdemhhypepfx Aazjf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) Gusdpfx Aomhh Dhjazsf - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Gjdsmhhx Iepfx Aazouf - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright. Gedpfx Ajmhh Anoazeuf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Gusdpjh Ek Dasfx Aazof Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times Gusdpomhhf Sjfx Aazef - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Gsdpfsmhhl Hex Aazjuf Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Gjdpfx Ajmidyfoazsuf Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) Gusdpfomkixwox Aazef - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.