Beli Fenice Plain bekas (183)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Dinding pengecatan Fenice Plain Baru dari pabrik Opsi yang tersedia: Plain-2000mm harga netto 17.800 PLN Kapasitas filtrasi: 8.000 m³/jam Daya motor: 1,5 kW Plain-3000mm harga netto 21.500 PLN Kapasitas filtrasi: 11.000 m³/jam Daya motor: 2,2 kW Plain-4000mm harga netto 25.800 PLN Kapasitas filtrasi: 15.000 m³/jam Daya motor: 4,0 kW Plain-5000mm harga netto 34.000 PLN Kapasitas filtrasi: 16.500 m³/jam Daya motor: 5,5 kW Plain-6000mm harga netto 38.000 PLN Kapasitas filtrasi: 22.000 m³/jam Daya motor: 2,2 kW + 2,2 kW Bsdpfxexz Acho Am Iowl Semua ukuran tersedia berdasarkan pesanan.

Kondisi: siap digunakan (bekas), Lebar kerja 4 meter Filtrasi dua tahap: filter karton + matras paint stop Filter atas untuk sirkulasi udara Penerangan area kerja Bedpfsw Rpxcox Am Ijwl Daya motor kipas 4 kW Produksi Italia Panel listrik dengan kelas perlindungan IP55 Pencahayaan plafon dengan kelas perlindungan IP65 Tombol darurat (STOP) Corong pembuangan Baru

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 9 kg, Cutter finishing dan roughing bekas 1 buah cutter finishing DIN1880 HSS Alur melintang dan memanjang Ø 100 Tinggi 50 Shank Ø 32 1 buah cutter finishing DIN1880 HSS Alur melintang dan memanjang Ø 90 Tinggi 35 Shank Ø 27 3 buah cutter finishing DIN1880 Bwjdoxv S D Depfx Am Isl HSS Alur melintang dan memanjang Ø 75 Tinggi 35 Shank Ø 27 1 buah cutter finishing DIN1880 HSS Alur melintang dan memanjang Ø 50 Tinggi 36 Shank Ø 22 1 buah cutter roughing DIN1880 HSS Alur melintang dan memanjang Ø 50 Tinggi 50 Shank Ø 28 1 buah cutter roughing HSS Alur melintang Ø 100 Tinggi 50 Shank Ø 32 1 buah cutter roughing DIN1880 HSS Alur melintang dan memanjang Ø 90 Tinggi 35 Shank Ø 27 1 buah cutter roughing HSS Alur melintang Ø 80 Tinggi 45 Shank Ø 27

Kondisi: sangat baik (bekas), rod end bearing - Inside diameter: 140 mm - Outside diameter: 230 mm - Outer ring width: 80 mm Bwjdpfx Ameb A H N Tj Iol - Inner ring width: 130 mm - Lubrication groove - Weight: 18 kg - Quantity: multiple units available

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 210 kW (285,52 hp), jenis bahan bakar: listrik, warna: perak, berat keseluruhan: 27.000 kg, berat kosong: 27.000 kg, berat operasi: 36.000 kg, berat muatan maksimum: 50.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026, nomor mesin/kendaraan: MYM-J57C90, Perlengkapan: hidrolik, kebisingan rendah, track karet, de Bwsdpsq Nf Tvefx Am Iol

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jarak pergerakan sumbu X: 1.060 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, tinggi total: 1.750 mm, lebar total: 4.600 mm, beban meja: 1.100 kg, berat keseluruhan: 6.500 kg, kecepatan spindel (maks.): 10.000 rpm, daya motor spindle: 15.000 W, berat alat: 7.000 g, panjang produk (maks.): 3.800 mm, jumlah sumbu: 3, This 3-axis vertical machining center, Hurco VMX 42, was manufactured in 2004. It features a table clamping area of 1270 x 610 mm and travel distances of 1060 mm on the X-axis and 610 mm on both the Y and Z axes. The machine supports a maximum table load of 1100 kg and offers a spindle speed range of 10 – 10,000 rpm. If you are looking for high-quality machining capabilities, you should consider the Hurco VMX 42 that we have for sale. Please contact us for more details. Bodpfjy I Ad Ijx Am Ijwl • Table clamping area: 1270 x 610 mm • Spindle power: 7.5 kW (100% duty cycle), 15.0 kW (30% duty cycle) • Spindle torque: 238 Nm at 625 rpm (30% duty cycle) • Programmable feed rate: 3.0 – 7600 mm/min • Adjustable feed rate: 3.0 – 11,400 mm/min • Rapid traverse X/Y/Z: 30 / 30 / 20 m/min • Pull stud: DIN ISO 7388/11 Type B • Max. tool diameter (adjacent/next empty): 80 mm / 160 mm • Max. tool length: 300 mm • Tool change time (chip-to-chip): max. 14 s • Tool changer: Automatic, 24 stations • Control system: Ultimax 4 with dual screens (text and graphics) • Software: Plain text and ISO code programming • Hardware: Pentium technology, 1.6 GB hard drive, 64 MB RAM • Electrical connection: 38 kVA, 400 V, 42 A • Compressed air: 6 bar / 0.3 ccm/min • Condition: Z-axis drive malfunction Additional Equipment • Coolant system • Coolant washdown gun • Chip flushing system • Chip enclosure • Chip conveyor • Signal light • Machine light • Machine mounts Technical Specification Taper Size SK 40

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking is now indispensable. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and item numbers after setup. Furthermore, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and transferring it automatically to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, moveable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30 Watt, 20 Watt, or 50 Watt • Laser class 1 • Wavelength 1064 nm Boderxrrhopfx Am Ijwl • Marking field size 150 x 150 mm (optionally larger) • Signal light for indicating operating status • Optional: rotary axis (three-jaw chuck) • Optional: fume extraction (incl. activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic focus distance determination • Marking software EZCAD in German/English (other languages on request) • Pilot laser (simple preview, plaintext preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Year of manufacture: 2014 Equipment and Technical Data: Fully in standard configuration with: - Support with linear guide, consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) Bedpfx Amsy Ih Skj Iowl 1 pc. blow-out, gluing and dowel insertion station for dowels Ø8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1,300 mm, travel speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion overhang adjustable from 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) automatically set with dowel overhang - Closed gluing system with 6 bar glue pressure through gluing nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for rinsing the gluing system, each with: 1 stainless steel tank for 7.5 kg glue and 7.5 l water - Control lamp for glue level indicator in glue tank - 1 pc. side stop left, 1 pc. side stop right, and 1 pc. center stop (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø80 mm 1 pc. TCT control with: built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0-50°C, 15” capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation cycle optimization, 4 work areas assignable with different programs, graphical workpiece display, parametric programming, 0-point offset, programmable operation lists, fault diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of drilling and dowel insertion station (programmable from 5-40 mm) Travel speed max. 30 mm/sec. 1 Single-spindle vertical drilling unit, top drilling, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) 4 vertical angled clamping cylinders 10° with holder, additional 1 keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Kondisi: bekas, jarak tempuh: 74.000 km, daya: 77 kW (104,69 hp), pendaftaran pertama: 05/2017, jenis bahan bakar: diesel, berat keseluruhan: 2.600 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, lebar total: 2.032 mm, tinggi total: 1.964 mm, panjang ruang muatan: 2.411 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, program stabilitas elektronik (ESP),

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing Bedpfsvvkfdsx Am Ijwl with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baik (bekas), Tahun pembuatan: 2003, Lini Produksi Croissant Fritsch CTR - bekas - tahun pembuatan 2003 - kapasitas maks. 4.000 pcs/jam Bodpfx Amoyvh Uuo Iswl - kontrol elektronik - 2 mesin pembentuk roti croissant (untuk produk tanpa isian dan produk dengan isian) - 3 kepala - mesin sepenuhnya terbuat dari baja tahan karat - kondisi teknis baik - pengambilan dari gudang / opsi pengiriman - harga atas permintaan

Kondisi: bekas, Diese Anzeige bezieht sich auf das Mettler Toledo Seven Excellence Multiparameter-Messgerät inklusive P25-Drucker. Das Gerät befindet sich in einwandfreiem, voll funktionsfähigem Zustand und ist sofort einsatzbereit. Die METTLER TOLEDO SevenExcellence Serie umfasst eine Reihe fortschrittlicher Tischmessgeräte für hochpräzise elektrochemische Messungen. Diese Geräte eignen sich ideal für Anwendungen in der Pharmaindustrie, in der Qualitätssicherung der Lebensmittel- und Getränkeindustrie sowie in der Umweltanalytik. Wesentliche Merkmale der Serie: Messfunktionen: Modelle unterstützen pH-Wert, Leitfähigkeit, Widerstand, Redox/ORP, TDS, Salzgehalt, ISFET, ionenselektive Elektroden (ISE) und gelösten Sauerstoff (DO). Benutzeroberfläche & Workflow-Optimierung: - Großes Touchscreen-Display für intuitive und effiziente Bedienung. - Klar strukturierte Menüsprache verhindert Verwechslungen bei der Inbetriebnahme. - Ein-Klick-Bedienung startet eine von 17 vordefinierten oder 60 individuell konfigurierbaren Methoden und erhöht so den Probendurchsatz. Bsdpfexhgdpex Am Iowl - Auswahl zwischen uFocus™-Ansicht (Anzeige nur der wichtigsten Daten) und Standardansicht mit detaillierten Informationen zu Einstellungen und Messwerten. Datenmanagement: - Export der Ergebnisse an Drucker, Excel oder LIMS. - Kompatibel mit LabX-Software für 21 CFR Part 11-Konformität und fortgeschrittene Datenverwaltung. - Zeit- und Datumsstempel einer funkgesteuerten Uhr sichern GLP-Konformität. Sicherheit & Compliance: - Benutzerverwaltung und PIN-Schutz verhindern unbefugte Methodenänderungen. - Integriertes Sensor Management (ISM®): pH-Elektroden werden automatisch erkannt und speichern eigene Kalibrierdaten – so bleibt höchste Genauigkeit auch beim Elektrodenwechsel gewährleistet. Modulares und ergonomisches Design: - Elektrodenarm für komfortable einhändige Bedienung und präzise vertikale Führung; verhindert Verschütten und spart Zeit. - Modulare Bauweise ermöglicht unkomplizierte Erweiterungen und Anpassungen an veränderte Laboranforderungen. - Verschiedene Schnittstellen (USB, Ethernet, RS-232) erlauben die Anbindung an PCs und Peripheriegeräte.

Kondisi: bekas, listing/fr/Cet article concerne l'un des deux ensembles de Mettler Toledo Seven Excellence, chaque ensemble comprenant un imprimante Mettler Toledo P25. Ces appareils sont en parfait état de fonctionnement et prêts à être utilisés immédiatement. La série METTLER TOLEDO SevenExcellence regroupe des analyseurs multiparamètres de paillasse de haute performance, conçus pour des mesures électrochimiques de haute précision. Ces instruments conviennent parfaitement aux applications dans l’industrie pharmaceutique, le contrôle qualité agroalimentaire et l’analyse environnementale. Caractéristiques principales de la série : Capacités de mesure : prise en charge du pH, conductivité, résistivité, potentiel rédox/ORP, TDS, salinité, ISFET, électrodes ioniques sélectives (ISE) et oxygène dissous (DO). Interface utilisateur & optimisation du flux de travail : - Grand écran tactile pour une navigation intuitive et efficace. - Menu clair en langage simple afin de faciliter la configuration. - Fonctionnement « one-click » permettant de lancer l’une des 17 méthodes prédéfinies ou 60 méthodes personnalisables, améliorant ainsi la productivité. - Choix entre la vue uFocus™, affichant uniquement les données essentielles, ou la vue standard pour un affichage détaillé des réglages et mesures. Gestion des données : Bsdexv Adbjpfx Am Ijwl - Exportation des résultats vers imprimantes, Excel ou LIMS. - Compatible avec le logiciel LabX pour conformité 21 CFR Part 11 et gestion avancée des données. - Horodatage automatique par horloge radio-pilotée pour répondre aux exigences GLP. Sécurité & conformité : - Gestion multi-utilisateurs et protection des méthodes par code PIN pour éviter les modifications non autorisées. - Les électrodes pH ISM® (Intelligent Sensor Management) sont reconnues automatiquement et conservent leurs paramètres d’étalonnage, garantissant la précision même lors d’un échange d’électrode. Conception modulaire et ergonomique : - Support d’électrode pensé pour la manipulation à une seule main et le déplacement vertical précis, réduisant les risques de déversement et les pertes de temps. - Construction modulaire permettant des évolutions et extensions simples selon vos besoins en laboratoire. - Connectiques USB, Ethernet et RS-232 pour intégration aux PC et périphériques.

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection Bwjdpoxwaz Hsfx Am Iel - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), jenis pendinginan: udara, berat keseluruhan: 120 kg, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.050 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) Bwsdpjxd Az Nofx Am Iol • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2023, Kondisi: baru, The machine is equipped with complete formwork (rotating mandrel, 5 steel rings, external formwork) for pipes with the following diameters: Dint=1000mm and Dint=800mm; - The equipment can produce plain concrete pipes with socket joints: Dint=1000mm; Dint=800mm; Dint=600mm; Dint=500mm; Dint=400mm; Dint=300mm; - Maximum pipe height: 1000mm. Minimum pipe height: 250mm. - Vertical movement of the rotating head – electric motor. - Variable rotation speed of the rotating head (frequency converter controlled). - Dimensions: 2.0 x 2.0 x 4.2 meters - Mass: approx. 2000 kg - Power: 16 kW (supply voltage: 380V) - Average productivity: 1 pipe / 6 minutes - Loading of concrete into the machine: manual. (optionally - by conveyor belt) - Handling of formwork with the concrete pipe inside: by forklift. - Formwork removal: immediate. Bjdpfx Aoiy Dl Hjm Ijwl - Removal of steel ring: after 2-3 days, depending on ambient temperature. - The frequency converter enables speed adjustment according to the inner diameter of the pipe. - Changing of the rotating head is simple and quick. - The rotating heads are fitted with interchangeable wear-resistant steel sheets. REQUIRED EQUIPMENT: - MX500L concrete mixer with aggregate loader: for concrete preparation - Conveyor: for transporting concrete from the mixer to the formwork - Steel rings for bottom socket - The production surface must be perfectly level!

Tahun pembuatan: 2002, Kondisi: bekas, z-axis travel 200 mm Max. clamping diameter for cutter heads 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting taper nominal diameter for cutter heads 500 mm Machine weight approx. 2.3 t Space requirements approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely adjusted cutter heads. The CS 200 cutter head setting and inspection device allows fast and simple adjustment of individual cutters, checks their position, and documents the measurement results. The measuring sequence on the CNC-controlled inspection device is semi-automated: On the screen, individual operations required for the process are clearly displayed for the operator. Positioning of the individual cutters in the cutter head, or the height of the cutter tips, is largely automatic via a special sequence and is simultaneously documented using a axial runout diagram. A subsequent measuring process checks the radial position of the internal and external cutting edges of all cutters in the cutter head. If individual inspection parameters of the cutters do not meet the tolerance specifications, this can be individually readjusted. Through the combination of semi-automated setting sequence, operator-guided setup operations, and automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high accuracy. Operator-Guided Setting and Inspection Process Bwjdpfx Ajy A S U Sem Isl - Graphical representation of cutter head details as well as measurement results including tolerance verification - Clear operator instructions (no codes or encrypted details) - Simple assignment of measurement results to the cutters - Documentation of setting and measurement results via printer - Setting and inspection process suitable for stick-blade heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: bekas, jarak tempuh: 167 km, daya: 129 kW (175,39 hp), pendaftaran pertama: 11/2025, jenis bahan bakar: diesel, berat keseluruhan: 5.500 kg, warna: hitam, tipe perpindahan gigi: otomatis, jumlah tempat duduk: 2, panjang total: 6.061 mm, lebar total: 2.169 mm, tinggi total: 2.960 mm, panjang ruang muatan: 3.540 mm, Tahun pembuatan: 2024, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, penggerak semua roda, program stabilitas elektronik (ESP), sistem navigasi,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 37.292 h, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 620 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, berat keseluruhan: 10.500 kg, kecepatan spindel (maks.): 8.000 rpm, daya motor spindle: 18.500 W, jumlah slot dalam magazin alat: 30, berat alat: 8.500 g, jumlah sumbu: 3, This HEDELIUS C60 - 2000 3-axis vertical machining center was manufactured in 2007. It offers an impressive X-axis travel of 2000 mm, a Y-axis travel of 620 mm, and a Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine with a capacity of 30 tools. If you are seeking high-quality machining capabilities, consider the HEDELIUS C60 - 2000, which we are offering for sale. Please contact us for further details. • Pendulum work area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optionally 198 Nm) • Tool holder: HSK A63 • Maximum tool length: 330 mm • Maximum tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: centralized coolant supply through the spindle Bwsdpfxsyz Spto Am Iol • Coolant tank capacity: 780 liters • Filtration fineness: 25 µm • Filtration capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA • Compressed air requirement: minimum 7 bar • Weight: 10,500 kg • Machine enclosure: full enclosure with electric roller shutter • Positioning system: glass scales on the X/Y/Z axes • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional Equipment • Chip conveyor: scraper belt design, discharge height approx. 1150 mm • Extraction unit: MultiAir extraction filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Kondisi: bekas, schulz-rollenkurve-90 Bjdpfx Amjk Aa N Rs Iswl

Kondisi: bekas, Schulz Roller Curve Conveyor Right-Hand Curve 90°-450-390 IR800 RA1185 Manufacturer: Schulz Angle: 90° Usable width (NUB): 390 mm Bodpfjk Aa H Iox Am Iowl Nominal/outer width (NB): 450 mm Inner radius (IR): 800 mm Conveying speed: v = 0.35 m/s Rollers: Type G6/50, plain bearing, with tapered plastic component Dimensions for transport (L x W x H): 1600 x 550 x 600 mm Transport weight: 100 kg Scope of delivery: Including double-sided side guide, without supports (supports available on request) Optional supports available: - Pair of double supports - Height adjustable at roller top +/-100 mm - Frequency inverter for stepless speed adjustment Price plus VAT ex central warehouse Dr. Sonntag KG, 97076 Würzburg For individual and professional consultation, simply get in touch with us. Contact us by phone or e-mail. We are happy to assist you with planning and executing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Kondisi: bekas, de-fi-01 Bwsdpfx Ameu Rv U Ro Isl

Kondisi: bekas, Tahun pembuatan: 1994, Transnorm Roller Curve Conveyor, 90°-770-700 IR800 Manufacturer: Transnorm Type: TS 2712 Year of manufacture: 1996 Conveying speed V = 0.58 m/sec Conveying angle: 90° Bsdjk Aa Hnspfx Am Iowl Roller width: 700 mm Overall width/Nominal width (NB): 770 mm Internal radius: 800 mm Drive: Chain transmission Rollers: Sliding bearings with conical plastic molded parts Transport weight: 130 kg on Euro pallet Transport dimensions (L x W x H): 1800 x 900 x 450 mm Scope of delivery: Without supports (please inquire if required) Optionally available: - Supports - Side guides - Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For tailored professional advice, please do not hesitate to contact us. Reach us by phone or email. We are happy to support you with planning and realization of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, resolusi (maks.): 2.400 DPI (titik per inci), berat kertas (min.): 52 g/m², berat kertas (maks.): 350 g/m², pembacaan penghitung (hitam): 14.185, pembacaan penghitung (warna): 274.915, Mesin dalam kondisi sempurna, dirawat hanya oleh perwakilan resmi Canon. Dipasang tahun 2019. Hanya 290.000 cetakan! Alasan penjualan - penggantian dengan mesin yang lebih baru. Kecepatan Cetak: • Hitam/Putih.....70 A4 per menit (35 A3) • Warna.....70 A4 per menit (35 A3) Resolusi.....Hingga 2400 x 2400 dpi Bobot Kertas.....52 hingga 350 g/m2 Jenis Kertas: Tipis, Biasa, Berat, Daur Ulang, Berwarna, Pra-lubang, Bond, Transparansi, Label, Tab, Berlapis, Bertekstur, Vellum Siklus Kerja Bulanan Maksimum.....350.000 Konfigurasi: • Multi-Drawer Paper Deck-C1 (Feeder Blower Terbesar) • EFI imagePRESS Server G250 • Staple Finisher-AC1 Bsdpfx Ajx Edgcjm Iowl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25164, berat keseluruhan: 230 kg, panjang total: 1.270 mm, tinggi total: 1.150 mm, tegangan masuk: 220 V, Perlengkapan: henti darurat, Schwartmanns Mesin Pembengkok Plat Bulat Tipe WSRM 04.2 Diameter poros: 65 mm Ketebalan plat: 1,25 mm Kecepatan kerja dapat diatur tanpa tingkat melalui sakelar putar Kontrol keselamatan ganda - tali penghenti darurat atau tombol Koneksi 230 V dengan steker Schuko untuk penyambungan yang cepat dan mudah Penggerak tiga poros Bwjdpfx Aey Efklem Ijl Fasilitas penggulungan kerucut dengan menurunkan poros belakang secara satu sisi Poros atas dapat diputar keluar untuk mengambil diameter yang sangat kecil Pengaturan diameter melalui tuas ratchet Bantalan geser kering bebas perawatan Penyesuaian poros tekuk tanpa tingkat Dilengkapi perangkat transportasi terintegrasi Mesin dalam kondisi benar-benar seperti baru.