Beli Kraussmaffei Km 651-6100 Gx bekas (9.761)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 651-6100 GX
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Injection Molding Machine – Krauss Maffei KM 651-6100 GX
Year of manufacture: 2025
Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen.
PV – injection unit regulation.
MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with color touchscreen.
Plasticizing unit
Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with check valve and open nozzle
Nozzle radius: 25 mm
Nozzle opening: 9 mm
Technical specifications (standard version)
Clamping unit
Clamping force: 6500 kN
Opening force: 455 kN
Mounting platen dimensions (H x V): 1660 x 1530 mm
Tie bar spacing (H x V): 1200 x 1020 mm
Opening stroke: 1450 mm
Mold height (min.–max.): 450 – 1000 mm
Daylight: 1900 mm
Ejector stroke: 300 mm
Ejector force front/rear: 140 / 70 kN
Injection unit
Screw diameter: 95 mm
L/D ratio: 23.0
Injection pressure: 1795 bar
Injection volume: 3367 cm³
Shot weight (PS): 2391 g
Injection speed: 110 mm/s
Injection rate: 780 cm³/s
Screw speed (standard): 147 rpm
Plasticizing capacity (at standard screw speed): 102 g/s
Nozzle contact force: 166 kN
Electro-hydraulic system
Pump motor power: 97 kW
Installed heater capacity: 54 kW
Number of cylinder heating zones: 7
Dry cycle time according to Euromap 6: 3.3 s / 840 mm
Dry cycle time according to KM standard: 2.9 s / 600 mm
Oil tank capacity: 1435 l
Linear robot – Krauss-Maffei LRX 250
Payload < 25 kg (gripper + drives + parts)
Itodpfx Asxdd U Djkaog
Placement on operator-opposite side
Axes:
X axis (from mold): 900 mm, servomotor
Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor
Z axis (crosswise): 2500 mm, servomotor
Dimensions and weight
Net weight (including control cabinet): 38.5 t
Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m
Iklan kecil
Cantabria
12.280 km
Mesin cetak injeksi
KraussMaffeiKM 800-6100 MX
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, jam operasional: 60.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, Horizontal Injection Molding Machine by Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control. Approximate working hours: 60,000. The machine is delivered RE-Conditioned by our team of technical specialists and in optimal working condition. We can also offer on-site commissioning at the customer's facility, ensuring the machine operates properly upon completion of installation.
Technical Specifications
SCREW DIAMETER: 85 mm
INJECTION PRESSURE: 2,242 Bar
SHOT VOLUME: 2,695 cm³
INJECTION WEIGHT: 2,452 g (PS)
YEAR OF MANUFACTURE: 2006
WORKING HOURS: 60,000
Itodow Avafopfx Akajg
MIN./MAX. MOLD HEIGHT: 550/1,100 mm
MAX. DAYLIGHT: 2,100 mm
OPENING STROKE: 1,600 mm
TIE BAR DISTANCE: 1,120 x 1,000 mm
PLATEN DIMENSIONS: 1,600 x 1,530 mm
CLAMPING FORCE: 8,000 kN
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 800 - 6100 MX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 30.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8000 kN
Maximum tool opening force: 560 kN
Movable platen opening force: 89 kN
Movable platen closing force: 92 kN
Clamping platen dimensions (H x V): 1600 x 1550 mm
Clear width (H x V): 1120 x 1000 mm
Mold opening stroke: 1600 mm
Mold installation height min./max.: 500 / 1100 mm
Maximum opening distance: 2100 mm
Ejector stroke: 300 mm
Ejector force forward/backward: 200/100 kN
Injection unit:
Screw diameter: 95 mm
L/D ratio: 23
Injection pressure: 1795 bar
Shot volume: 3367 cc
Shot weight (PS): 3064 g
Injection flow rate: 690 cc/s
Screw speed: 116 rpm
Plasticizing rate: 104 g/s
Nozzle contact force: 166 kN
Electro-hydraulic equipment:
Rated pump motor power: 90 kW
Installed heating capacity: 53 kW
Number of cylinder heating zones: 7
Oil capacity: 1500 l
Dimensions and weights:
Space requirement approx.: 11.00 x 3.00 x 2.60 m
Total weight: 44,500 kg
Max. mold weight: 12,200 kg
Accessories:
- Oscillation dampers
Additional equipment:
- 1 x air valve
- Tie bar pulling device
Isdpfx Asymn Rvskastg
- 3 x hydraulic core pulls on moving platen
- 2 x hydraulic core pulls on fixed platen
- 20 x hot runner control zones
- Robot interface according to Euromap 67
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 800 - 6100 MX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8000 kN
Maximum tool opening force: 560 kN
Movable platen opening force: 89 kN
Movable platen closing force: 92 kN
Clamping platen dimensions (H x V): 1600 x 1550 mm
Clear width (H x V): 1120 x 1000 mm
Mold opening stroke: 1600 mm
Mold installation height min./max.: 500 / 1100 mm
Isdpsymn Nfsfx Akaotg
Maximum opening distance: 2100 mm
Ejector stroke: 300 mm
Ejector force forward/backward: 200/100 kN
Injection unit:
Screw diameter: 95 mm
L/D ratio: 23
Injection pressure: 1795 bar
Shot volume: 3367 cc
Shot weight (PS): 3064 g
Injection flow rate: 690 cc/s
Screw speed: 116 rpm
Plasticizing rate: 104 g/s
Nozzle contact force: 166 kN
Electro-hydraulic equipment:
Rated pump motor power: 90 kW
Installed heating capacity: 53 kW
Number of cylinder heating zones: 7
Oil capacity: 1500 l
Dimensions and weights:
Space requirement approx.: 11.00 x 3.00 x 2.60 m
Total weight: 44,500 kg
Max. mold weight: 12,200 kg
Accessories:
- Oscillation dampers
Additional equipment:
- 1 x air valve
- Tie bar pulling device
- 3 x hydraulic core pulls on moving platen
- 2 x hydraulic core pulls on fixed platen
- 20 x hot runner control zones
- Robot interface according to Euromap 67
Lelang
Lelang telah berakhir
Nordrhein-Westfalen
11.318 km
Mesin cetak injeksi
KraussMaffeiKM 800 - 6100 MX
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, jam operasional: 50.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, tekanan injeksi: 1.795 batang, langkah pembukaan: 2.100 mm, No reserve price – guaranteed sale to the highest bidder!
TECHNICAL DETAILS
Clamping force: 8,000 kN
Maximum mold opening force: 560 kN
Movable platen drive force (opening): 89 kN
Movable platen drive force (closing): 92 kN
Mounting plate (H x V): 1,600 x 1,550 mm
Clear opening (H x V): 1,120 x 1,000 mm
Mold opening stroke: 1,600 mm
Mold installation height min./max.: 500 / 1,100 mm
Maximum mold weight: 12,200 kg
Opening width: 2,100 mm
Ejector stroke: 300 mm
Ejector force forward/backward: 200/100 kN
Screw diameter: 95 mm
L/D ratio: 23
Injection pressure: 1,795 bar
Stroke volume: 3,367 cm³
Shot weight (PS): 3,064 g
Injection flow: 690 cm³/s
Screw rotation speed: 116 rpm
Plasticizing rate: 104 g/s
Itsdpfx Ajyv Acmjkaog
Nozzle contact force: 166 kN
MACHINE DETAILS
Dimensions & Weight
Space requirement approx.: 11.00 x 3.00 x 2.60 m
Total weight: 44,500 kg
Pump drive power: 90 kW
Installed heating capacity: 53 kW
Cylinder heating control zones: 7
Oil fill volume: 1,500 l
Operating hours: 50,000 h
EQUIPMENT
Oscillation elements
1 x air valve
Tie bar pulling device
3 x hydraulic core pull (BWAP)
2 x hydraulic core pull (FWAP)
20 x hot runner control zones
Robot interface as per Euromap 67
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 850 - 6100 MX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 25.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 8,500 kN
Maximum tool opening force: 560 kN
Moving platen travel force (open): 153 kN
Moving platen travel force (close): 117 kN
Mounting plate (H x V): 1600 x 1600 mm
Clear distance (H x V): 1140 x 1140 mm
Mold opening stroke: 1600 mm
Mold installation height min./max.: 500 / 1100 mm
Maximum opening width: 2100 mm
Ejector stroke: 300 mm
Ejector force forward/backward: 200 / 100 kN
Injection unit:
Screw diameter: 95 mm
L/D ratio: 23
Injection pressure: 1795 bar
Stroke volume: 3367 ccm
Shot weight (PS): 3064 g
Injection rate: 690 ccm/s
Screw speed: 116 rpm
Plasticizing rate: 104 g/s
Nozzle contact force: 166 kN
Electrohydraulic equipment:
Rated pump motor output: 90 kW
Installed heating capacity: 53 kW
Cylinder heater control zones: 7
Oil capacity: 1500 l
Dimensions and weights:
Space requirement approx.: 11.00 x 3.00 x 2.60 m
Total weight: 43,000 kg
Max. mold weight: 12,200 kg
Accessories:
Itsdpsyb Sx Hsfx Akaog
- Oscillation elements
Additional equipment:
- 1 x air valve
- 4 x hydraulic core pulls
- 12 x hydraulic cascades
- 2 x 12-fold water manifold
- Robot interface according to Euromap 67
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffeiKM 800/6100 MC
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, 1
Itjdpfx Akonh Rwgoaog
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 900 – 8100 GX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine
Year of manufacture: 2015
General Description:
Hydraulic-mechanical, two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen.
The machine is equipped with a PV-type injection unit adjustment system (proportional valve).
Control is handled via the modern MC6 system, based on an industrial-grade computer with real-time Ethernet technology.
The control panel is an integrated 19-inch touchscreen with a colour display, LED backlighting, and process visualisation using ProcessDesigner.
Plasticising Unit:
Complete unit for thermoplastics processing
Wear-resistant (abrasion-protected) version
Screw diameter: 105 mm
Non-return valve and open nozzle
Technical Specifications:
Clamping Unit:
Clamping force: 9,000 kN
Mould opening force (pressure pads): 630 kN
Itjdpswyxbgefx Akaeg
Platen dimensions (W x H): 1660 x 1530 mm
Tie bar spacing: 1180 x 1000 mm
Max. mould opening stroke: 1600 mm
Mould height (min – max): 500 – 1100 mm
Max. opening stroke: 2100 mm
Ejector stroke: 300 mm
Ejector force (forward / return): 140 / 70 kN
Injection Unit:
Screw diameter: 105 mm
L/D ratio: 23.0
Injection pressure: 1778 bar
Injection volume: 4546 cm³
Shot weight (for PS): 3228 g
Injection rate: 805 cm³/s
Screw speed (standard): 150 rpm
Nozzle contact force: 166 kN
Electrical and Hydraulic Equipment:
Pump motor power: 120 kW
Heater power: 59 kW
Number of barrel heating zones: 7
Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm
Dry cycle time / stroke (KM standard): 2.9 s / 590 mm
Hydraulic oil tank capacity: 1450 l
Dimensions and Weight:
Net weight (with control cabinet): 40 tons
Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 650 - 6100 CM
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN
Max. mold opening force: 346 kN
Movable platen opening force: 169 kN
Movable platen closing force: 144 kN
Clamping platen (H x V): 1520 x 1470 mm
Clear width between tie bars (H x V): 1000 x 930 mm
Mold opening stroke: 1150 mm
Minimum mold installation height: 600 mm
Max. daylight: 1750 mm
Ejector stroke: 250 mm
Ejector force forward/back: 95 kN
Injection unit:
Screw diameter: 95 mm
L/D ratio: 23
Injection pressure: 1795 bar
Shot volume: 3367 ccm
Shot weight (PS): 3064 g
Injection flow rate: 690 ccm/s
Screw speed: 153 rpm
Plasticizing rate: 104 g/s
Nozzle contact force: 166 kN
Electrohydraulic equipment:
Rated drive power, pump motor: 90 kW
Installed heating capacity: 50 kW
Heater zones, barrel: 7
Dimensions and weight:
Space requirement approx.: 9.83 x 2.90 x 2.80 m
Ijdpfex Hzzcsx Akastg
Total weight: 43,170 kg
Accessories:
- Anti-vibration elements
- Krauss Maffei Robot LR300
X: 1200 mm, servo motor driven
Y: 1000/1000 mm, telescopic, servo motor driven
Z: 3500 mm, servo motor driven
C: 0 - 90°, pneumatic
- Conveyor belt
- Safety enclosure
Additional equipment:
- 1 x air valve
- 6-fold pneumatic cascade control
- 12 x hot runner zones
- 2 x hydraulic core pulls on moving platen
- 2 x hydraulic core pulls on fixed platen
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
KraussMaffeiKM 400-3000 GX Blue Power
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot
Year of manufacture: 2018
Injection Unit:
Screw diameter: 80 mm
Shot weight: 1464 g
Injection pressure: 1855 bar
Metering volume: 1608 cc
Isdpfx Aoy Sl D Ejkaetg
Clamping Unit:
Clamping force: 400 t
Tie bar spacing: 920x830 mm
Platen size: 1280x1240 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: MC5 - touchscreen
Additional equipment:
Very good technical condition
Operating hours: approx. h in automatic mode
Euromap 67
Robot interface
Min./max. mould height: 400/900 mm
Air valve x 4
Hydraulic core pull x 4
Hot runner control x 36
Self-closing nozzle x 10
Hardened injection unit - bimetallic
Proportional valve on the injection unit – precise injection
Automatic upper tie bar extraction function
Machine regularly serviced by authorized Krauss Maffei service
Krauss Maffei LRX 250 robot
Year of manufacture: 2018
High-speed robot
5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation) and C
Vacuum
Touch panel control
Robot including adapter, conveyor belt and protective housing
Purchase of robot and conveyor at extra cost
Dimensions:
Weight: 22,650 kg
Length/Width/Height: 7.58x2.73x2.32 m
All machines offered are started up by our service technicians before sale.
A video of the technical tests of the selected machine is available on request or you may participate in live technical tests at our company in Łódź.
Price: On request
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
KraussMaffeiKM 65-160 C2
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, We are pleased to offer a very well-maintained, continuously serviced injection moulding machine. We are also happy to accept well-kept machines from year of manufacture 2010 onwards as trade-ins. Please offer us your available machines.
Comprehensive maintenance by the manufacturer up to present.
Injection Moulding Machine Krauss Maffei KM65-160 C2
Injection Moulding Machine:
Manufacturer / Model: Krauss Maffei KM65-160 C2
Serial No.: 61007063
Year of manufacture: 2005
Control system: MC4
Complete annual maintenance by the manufacturer
Clamping Unit:
Clamping force: 650 kN / 65 tons
Tie bar distance: 405 x 405 mm
Min. mould installation height: 250 mm
Max. platen opening: 750 mm
Standard mounting platens: 610 x 610 mm
Ejector stroke: 150 mm
Core pull: 1 unit
Injection Unit
Injection unit size / cylinder diameter: 160 /
Cylinder ø25 mm and cylinder ø18 mm
Iodpfx Aeh Dp R Eekastg
Max. shot weight (ø25): 47 g/PS
Injection flow rate: 63 cm³/sec
Specific injection pressure: max. 2500 bar
Handling interface: Euromap 12
Dosing interface: Yes
Dimensions & Weights:
Weight with control cabinet: 3.8 t
Length: 3800 mm
Width (machine only): 1050 mm
Height: 1890 mm
Oil capacity: 270 L
Location: Hanover / Lower Saxony
The machine is in excellent condition and can be inspected under power.
Any peripheral equipment shown is NOT included in the offer!
The machine is immediately available from our warehouse.
Loaded free on truck of the buyer or delivered free to location with reimbursement of freight costs.
For information about the machines we offer and our company:
- We only sell machines purchased out of ongoing production from our own stock in Hanover.
- All offered machines are inspected and tested before dismantling.
- We do NOT sell insolvency equipment – we are NOT brokers dealing in third-party property.
- All machines offered come from successful companies where maintenance and care are a matter of course.
- All machines offered are available for viewing in our warehouse.
Iklan kecil
Freiburg im Breisgau
11.274 km
Mesin cetak injeksi
KraussMaffeiKM 65-160 C2
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1999, gaya penjepit: 650 kN, Pabrikan: KraussMaffei Kunststofftechnik München
Model: KM 65-160 C2
Gaya penutupan: 650 kN
Nomor Mesin: 641070
Nomor Pesanan: 643883/1
Tahun Pembuatan: 1999
Penunjukan Ukuran Internasional: 160 C2 / 65
Tegangan Operasi: 400 V
Fase: 3
Frekuensi: 50 Hz
Arus Total: 153 A
Sekering Elco: 160 A
Arus Motor Maksimum: 30 A
Iedpjytik Rjfx Akaotg
Berat Mesin: 3200 kg
Lokasi: Freiburg
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 650 / 2000 / 2000 GXW G06
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer!
As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines:
The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining.
TECHNICAL DATA:
KM 650 / 2000 / 2000 GXW G06 (Order 38618339)
CONTROL SYSTEM
Iodpfx Akow U N Ixoaetg
- MC 6 with 24” TFT color screen, multitouch functionality
CLAMPING UNIT
- Clamping force kN 6500
- Maximum mold opening force kN 455
- Daylight (H x V) mm 1110 x 960
- Mounting platen (H x V) mm 1540 x 1440
- Mold height (min. - max.) mm 1550 (without center platen)
- Maximum opening stroke mm 3200
- Maximum mold open distance mm 1650
- Maximum mold weight kg 22000
INJECTION UNIT 1 SP2000
- Screw diameter / type mm 60 / Thermoplastic
- Effective L/D ratio 23.3
- Injection pressure bar 2420
- Shot volume cm³ 792
- Shot weight (max. stroke, PS) g 720
- Injection speed mm/s 140
- Injection flow rate cm³/s 396
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 72.2
- Nozzle contact force kN 82
INJECTION UNIT 2 SP2000
- Screw diameter / type mm 70 / Thermoplastic
- Effective L/D ratio 20
- Injection pressure bar 1877
- Shot volume cm³ 1078
- Shot weight (max. stroke, PS) g 981
- Injection speed mm/s 140
- Injection flow rate cm³/s 539
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 98.3
- Nozzle contact force kN 82
ELECTRICAL PARAMETERS
- Connected load kW 341
- Power supply V / Hz 400 / 50 3-phase with neutral conductor
WEIGHT AND DIMENSIONS
- Net weight t 43.5
- Length x width x height m 11.89 x 3.22 x 2.77
ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- BluePower ServoDrive
- Pneumatic valve 1-fold (BWAP), 1-fold (FWAP)
- Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP)
- Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP)
- Mold heating 96-fold (3.5 kW each)
- Euromap interface for handling E18
- Euromap interface (central computer) E67, E77, E78, E63, E82.1
- Adaptive Process Control (APC+)
- Graphics analysis package
- Sliding table with servo-driven turning unit
- Vertical center platen
- Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen
- ColorForm interface: signal interface for connection of an RPM system
- Electrical interface for HRS-Flexflow system
- Electrical interface and hydraulic valves for “1-K Dummy Operation”
- Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation
The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request.
We look forward to your inquiry.
Iklan kecil
Trenčianske Stankovce
10.519 km
Krauss Maffei KM650-4300 GX (2013)
KraussMaffeiKM650-4300 GX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Perlengkapan: dokumentasi / manual, KraussMaffei KM650-4300 GX Machine
Clamping force (kN): 6500
Distance between tie bars (h x v) (mm): 1110 x 960
Mold opening stroke (mm): 1450
Min. mold height (mm): 450
Max. mold height (mm): 1000
Ejector stroke (mm): 250
Screw diameter (mm): 90 (HPS-M mixing)
L/D ratio: 20
Injection pressure (bar): 1839
Shot volume (cm³): 2290
Iodpfxoy Apdqj Akaetg
Control version: MC5
Screen language: German
Condition: Tested, fully operational
Features:
- Anti-vibration leveling pads
- BluePower - Servo pump drive for reduced energy consumption
- Wear-resistant softener, surcharge
- BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption
- 2 x pneumatic valve on moving platen for blow function
- 2 x pneumatic valve on fixed platen for blow function
- Pneumatic cascade control, 4-fold for hot runner
- Hydraulic cascade control, 4-fold for hot runner
- Conveyor belt control
- Mechanical robot interface according to EUROMAP 18
- Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins
- Hydraulic core pull system, 2-fold on moving platen
- Hydraulic core pull system, 2-fold on fixed platen
- Pneumatic core pull system, single on moving platen
- Pneumatic core pull system, single on fixed platen
- Pressure relief for hydraulic core pulls
- Pressure relief for hydraulic cascade valves
- 20 hot runner control circuits
- Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A)
- Volt-free contact for "Plasticizing" signal at HAN 3 A socket
- Switch-over to holding pressure depending on mold cavity pressure (Kistler)
- Quality statistics
- Chip card reader
- Diagram display and analysis package with 10 diagrams
- Trend graphics
- PV regulation
- Production data interface consisting of 5 potential-free contacts in the control cabinet
- 3 freely programmable inputs and outputs in the control cabinet
KraussMaffei LRX 350 Linear Robot:
- Fully integrated control system
- Horizontal stroke: 4000 mm
- Vertical stroke (telescopic): 2000 mm
- Demolding stroke: 1200 mm
- Maximum payload: 35 kg
Iklan kecil
Jerman
11.248 km
Krauss Maffei KM 800-6100MX
KraussMaffeiKM 800-6100MX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, berat injeksi: 2.452 g, en
Iedpfjyyxc Dsx Akajtg
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffeineueste MC6 KM1000/6100MC
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Used injection molding machine directly from the manufacturer!
As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale.
CONTROL SYSTEM
- MC6
TECHNICAL DATA
CLAMPING UNIT
- Clamping force: 10,000 kN
- Tie bar spacing (h x v): 1,400 x 1,120 mm
- Maximum mold opening distance: 1,700 mm
- Min./max. mold installation height: 700 / 1,200 mm
- Platen opening stroke: 2,400 mm
- Ejector stroke: 250 mm
- Ejector force: 226 kN (reversal: 59 kN)
INJECTION UNIT
- Screw diameter: 95 mm
- L/D ratio: 23
- Injection pressure: 1,795 bar
- Injection volume: 3,367 cm³
- Shot weight for PS: 3,064 g
- Injection rate: 690 cm³/s
- Nozzle contact force: 166 kN
Electrical Parameters
- Pump connected load: 90 kW
- Heating capacity: 61 kW
Itodpjnh Rhvjfx Akaog
Weight and Dimensions
- Net weight: 65 t
- Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m
We generally deliver this system in fully functional condition. Additionally, as the original manufacturer, we can offer various additional options on a case-by-case basis, for example:
- Upgrades for energy optimization of the system
- Optional integration with KraussMaffei digital products
- Plasticizing retrofits
- Optional: Organization and handling of transport (not included in the price)
- Optional: Assembly and commissioning (not included in the price)
You benefit from top-tier service as well as the opportunity to purchase tailored spare parts packages for wear parts, ensuring uninterrupted production with your new used machine.
Don't hesitate—contact us today for your offer!
Iklan kecil
Nürnberg
11.010 km
Mesin cetak injeksi
KraussMaffeiKM 50-90 C1/50
Hubungi
Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 44731, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, berat injeksi: 47 g, tinggi cetakan (min.): 200 mm, langkah pembukaan: 550 mm, panjang total: 4.000 mm, lebar total: 1.163 mm, tinggi total: 1.787 mm, berat keseluruhan: 2.300 kg, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 58 A, Please refer to the pictures and video for the condition and contents of the offer.
The system is currently dismantled.
The device/system offered here has been tested and is fully functional and ready for operation.
The purchase price includes VAT.
You will receive a proper invoice.
For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied.
Subject to prior sale.
Please visit our website to view our other offers as well.
All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only.
Iedpsx Srggefx Akastg
Deviations from technical specifications as well as errors in the item description may occur and are reserved.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 120 / 380 PA G01
Hubungi
Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines:
The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits:
– Optimised price-performance ratio for a broad spectrum of applications
Itodey Rmwdepfx Akaeg
– High energy efficiency thanks to the all-electric machine concept
– Fast and reliable delivery due to the base machine concept featuring a broad range of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine No.: 61036683, new, Year 2013)
CONTROL
- MC P1 with 15'' TFT colour display featuring multi-touch functionality
CLAMPING UNIT
- Clamping force: kN 1200
- Maximum mould opening force: kN 180
- Clear space (h x v): mm 520 x 470
- Mounting platen dimensions (h x v): mm 690 x 640
- Minimum–maximum mould height: mm 180–450
- Maximum opening stroke: mm 850
- Maximum mould opening travel: mm 450
- Ejector drive: electric
- Ejector stroke: mm 120
- Ejector force fwd/rev: kN 27 / 33
- Ejector speed fwd/rev: mm/s 300 / 300
- Maximum mould weight: kg 850
INJECTION UNIT
- Screw diameter / type: mm 35 / standard
- Effective L/D ratio: 22.9
- Injection pressure: bar 2429
- Shot volume: cm³ 154
- Shot weight at max. stroke for PS: g 140
- Injection speed: mm/s 200
- Injection rate: cm³/s 192
- Screw speed: rpm 374
- Plasticising rate (standard screw): g/s 18.9
- Nozzle contact force: kN 34
ELECTRICAL PARAMETERS
- Connected load: kW 22.7
- Installed heating capacity: kW 11.5
- Power supply: V / Hz 200 / 50 3-phase with neutral
WEIGHT AND DIMENSIONS
- Net weight including control cabinet: t 6.7
- Length x width x height: m 5.18 x 1.76 x 1.90
ADDITIONAL EQUIPMENT
- Wear-resistant plasticising unit
- BluePower full insulation for plasticising cylinder
- Open nozzle
- Air valve: single (BWAP)
- Pneumatic control for hot runner shut-off: single
- Electrical interface for pneumatic cascade: 4-fold
- Euromap interfaces for automation: E18 + E67
- Euromap interface (central computer): E67, E77
- Water manifold: 4-fold
- Electrical prewiring for external hydraulic unit
- Automatic central lubrication
- Adaptive Process Control (APC)
- Injection compression moulding function
- Graphic analysis package
- Swivelling device for injection unit
The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request.
We look forward to your enquiry.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 CX G01
Hubungi
Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 1.609 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61008195, gaya penjepit: 800 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 201 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 183 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 750 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Injection moulding machines direct from the manufacturer!
As a manufacturer, KraussMaffei offers you our inspected and flexible stock machines:
The fully hydraulic CX series features an especially compact, efficient, and flexible two-platen machine. The highly compact two-platen design with cantilevered clamping unit provides generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further offers a powerful basis to meet the highest demands, ensuring the right solution for any application.
TECHNICAL DATA:
KM 80 / 380 CX G01 (Order 38648713)
CONTROL SYSTEM
- MC 6 with TFT color display with multitouch functionality
CLAMPING UNIT
- Clamping force: kN 800
- Maximum mold opening force: kN 55
- Clear space between tie bars (H x V): mm 470 x 420
- Mounting platen size (H x V): mm 670 x 670
- Minimum/maximum mold height: mm
- Maximum opening stroke: mm 750
- Maximum mold opening travel: mm 500
- Ejector drive: hydraulic
- Ejector stroke: mm 150
- Ejector force fwd/back: kN 23 / 10
- Ejector speed fwd/back: mm/s 760 / 800
- Max. mold weight: kg 1000
INJECTION UNIT
- Screw diameter/type: mm 40 / Standard (customization possible)
- Effective L/D ratio: 20
Ijdpsy Rlmwofx Akaetg
- Injection pressure: bar 1,860
- Shot volume: cm³ 201
- Shot weight at max. stroke for PS: g 183
- Injection speed: mm/s 100
- Injection flow rate: cm³/s 126
- Screw drive/rotation speed: 1/min 295
- Plasticizing rate (standard): g/s 12.3
- Nozzle contact force: kN 50
ELECTRICAL PARAMETERS
- Connected load: kW 15.0
- Installed heating capacity: kW 10.9
- Power supply: V/Hz 400 / 50, 3 phases with neutral
WEIGHT & DIMENSIONS
- Net weight with control cabinet: t 3.55
- L x W x H: m 3.96 x 1.48 x 2.02
ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- 1 additional temperature control circuit for nozzle heating
- 1-way air valve (BWAP)
- Pneumatic hot runner shutdown control, 1-way
- Hydraulic core pull, 1-way (BWAP)
- Euromap interface for handling: E18, E63
- Euromap interface (central computer): E67, E77
- Adaptive Process Control (APC)
- Injection-compression function
- Graphic analysis package
The machine is located at our facility in Parsdorf and is available at short notice. Additional options are available upon request.
We look forward to your inquiry.
Iklan kecil
Hambach
11.307 km
Mesin cetak injeksi
KraussMaffeiKM 4000-19000 MC
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad
Itjdpoyt Hy Nsfx Akaeg
Iklan kecil
Hambach
11.307 km
Mesin cetak injeksi
KraussMaffeiKM 3200-19000 MC
Hubungi
Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine
Iedoyt H Dhopfx Akaetg
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 160 - 750 CX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN
Max. tool opening force 87 kN
Moving platen opening force 45 kN
Moving platen closing force 38 kN
Clamping platen (H x V) 820 x 845 mm
Clear distance between tie bars (H x V) 520 x 520 mm
Mold opening stroke 650 mm
Min. mold installation height 300 mm
Maximum opening stroke 950 mm
Ejector stroke 150 mm
Ejector force forward/back 23 kN
Injection Unit:
Screw diameter 50 mm
L/D ratio 20
Injection pressure 1892 bar
Shot volume 393 ccm
Shot weight (PS) 358 g
Injection flow rate 177 ccm/s
Screw speed 265 rpm
Plasticizing rate 36.2 g/s
Nozzle contact force 50 kN
Electrohydraulic Equipment:
Rated power of pump motor 22 kW
Installed heating capacity 16 kW
Number of heating zones (barrel) 5
Oil capacity 489 liters
Dimensions and Weights:
Floor space approx. 5.50 x 2.00 x 2.20 m
Total weight 8200 kg
Max. mold weight 1862 kg
Accessories:
- Vibration-damping elements
- BluePower servo pump drive
Additional Equipment:
- 1 x air valve
- 8 x hot runner controllers
- 2 x core pulls on moving platen
- 2 x core pulls on fixed platen
- Robot interface to Euromap 67
Isdsy Nlb Sopfx Akastg
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
KraussMaffeiKM 300 - 1900 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 57.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, 01
Ijdpfxoy Nk Tas Akastg
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
KraussMaffeiKM 120-380 EX aus Reinraumfertigung
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 61.300 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, jarak antara tiang: 470 mm, tekanan: 2.429 batang, Here, as a specialized dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale.
Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards.
We have been wholesalers of injection moulding machines for over 25 years.
++++From pharmaceutical cleanroom production++++
Manufacturer: KraussMaffei
Machine type: KM 120-380 EX
International designation: 380 EX / 120
Machine number: 61011287
Year of manufacture: 2008
Machine hours: 61,300 h
Control system: MC5
Technical Data - Clamping Unit
Clamping force: 1,200 kN
Tie bar distance h x v: 470 x 470 mm
Platen size h x v: 780 x 735 mm
Min. mould height: 200 mm
Max. mould height: 450 mm
Max. daylight: 850 mm
Opening stroke: 400 mm
Ejector stroke: 150 mm
Ejector force: 22 kN
Moveable platen centering diameter: 160 mm
Fixed platen centering diameter: 125 mm
Mould weight: 1,485 kg
Technical Data - Injection Unit
Screw diameter: 35 mm
Shot volume: 156 cc
Injection pressure: 2,429 bar
Screw L/D ratio: 23 l/d
Screw speed: 289 rpm
Plasticizing rate: 27 g/s (PS)
Free-shot rate: 477 g/s (PS)
Number of heating zones: 5
Dimensions & Weight
Machine dimensions LxWxH: 6m x 1.7m x 2.19m
Total weight: 9,700 kg
Equipment
Screen texts: German
Screen texts: English
+++Extras++++
Automation: Handling device / extraction robot included - Handling: LR 100-2300
Conveying technology: Roller conveyor included
CE marking: available
Full maintenance and acceptance history
Complete last test report
Incl. conveyor belt Incl. safety cage
Machine equipped with water battery
Machine without material hopper
Leveling elements
Interface: EUROMAP 12
Ijdpfxsy D Adts Akajtg
Electrical
Schuko socket 10A
CEE socket 16A
Voltage: 400 V
Frequency: 50 Hz
Motor current: 80 A
Warranty
Warranty valid until first commissioning
Loading/Shipping
Free loaded onto buyer's truck or free delivery against freight reimbursement
Available ex stock Hanover / Germany
Iklan kecil
Hannover
11.047 km
Mesin cetak injeksi
KraussMaffeiKM 250-1000 CX
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine:
Ijdpfjxqhuuox Akastg
Of course, we also purchase well-maintained injection moulding machines on an ongoing basis.
Year of manufacture: 2010
We have been a wholesaler of used injection moulding machines for over 25 years.
Current notice – Tax benefit for used machines:
From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment.
Keyword: Growth Booster (§ 7 para. 2 EStG-E)
Currently in stock, tested at our warehouse in Hanover:
Manufacturer: Krauss Maffei
Model: KM 250 1000 CX
Control system: MC5
Year of manufacture: 2010
Operating hours: 65,850 h
Machine number: 61013689
Processed materials: PE and PP thermoplastics
Equipment / Extras:
- 2 x core pull (movable core pull, fixed core pull)
- Pneumatic valve 1 on moving platen
- Accumulator for increased injection capacity
- Fast SK demounting CX Midrange
- Ejection of cold sprue
- Start handling during mould movement
- Start-up control
- Cycle time analysis
- External USB keyboard
- Graphic analysis and maintenance notifications
- Electronic coding of injection unit
- Pneumatic valve at fixed platen for air blast
- 12 temperature control zones
- Volt-free BDE contact
- Process monitoring
- Cycle memory
- Trend graphics – target vs. actual
- PV control
- Active backpressure regulation
- From first ownership – origin Germany
- Maintained regularly by manufacturer and previous owner
Clamping unit:
Clamping force: 2500 kN / 250 tonnes
Tie bar spacing: 630 x 630 mm
Platen size: 995 x 1050 mm
Maximum daylight: 820 mm
Minimum mould height: 330 mm
Maximum opening stroke: 1150 mm
Ejector stroke: 200 mm
Ejector force: max. 57 kN / return 26.3 kN
Injection unit:
Screw diameter: 50 mm
Injection volume: 432 ccm
Shot weight: 393 g/PS
Injection pressure: 2304 bar
Electrics:
Pump: 45 kW
Heater: 5 zones, 18.7 kW
Weight: 13,900 kg
Dimensions: 5.7 x 2.3 x 2.3 m
Complete documentation (manual, software)
Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately.
The machine is offered fully tested and functional.
The machine is our exclusive property.
The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power.
About our company and equipment offered:
- We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse
- All offered machines are inspected and tested before disassembly
- We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines
- All offered machines come from successful businesses where maintenance and care are a matter of course
- All offered machines are available for inspection at our warehouse
Kami memudahkan pencarian untuk Anda: "kraussmaffei km 651-6100 gx"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.




















































































































































































































































