Beli Tiefenstegrahmen F. 1.200 Mm Regal / Lichte Stützweite: Ca. 1.100 Mm bekas (96.844)

Kondisi: baik (bekas), Included in the scope of delivery: 01x Depth crossbeam frame, used Material color: Sendzimir galvanized Total length: approx. 1,250 mm for rack depth: 1,200 mm clear support span: approx. 1,100 mm beam support: approx. 50 mm support angle: L: approx. 80 x 80 mm total width: approx. 860 mm internal width: approx. 855 mm material thickness: approx. 3 mm Side frame: length: approx. 1,2450 – 1,070 mm front tapered depth: approx. 200 mm height: approx. 195 mm End stop: depth: approx. 200 mm height: approx. 195 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This is a used item; scratches, dents, and signs of use may be present. Hjdpsr Dr Susfx Abyen This item is offered for collection only. Should transportation or shipment be required, this will incur additional costs, which can be inquired with us separately, depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Included in the scope of delivery: 01x Deep beam, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for upright depth: approx. 1,100 mm clear support span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Beam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Hjdpfxswl Ncfe Abyen Mr. Falk Deutsch General information about this item: This item is offered for collection only. If shipping or transport is required, this will incur additional costs, which can be obtained from us separately depending on the place of delivery and scope of delivery.

Kondisi: baik (bekas), Included in the scope of delivery: 01x Deep Beam, used Material color: raw Total length: approx. 1,110 mm Internal length: approx. 1,102 mm For upright depth: approx. 1,100 mm Clear support span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Traverse support: approx. 52 mm Unit weight: approx. 5.42 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply. These can be provided separately upon request, depending on the place of delivery or scope of delivery. Hsdpfx Abjwl Ulloyjn

Kondisi: baik (bekas), Included in the delivery: 01x Deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Internal length: approx. 1,103 mm For upright depth: approx. 1,100 mm Clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Unit weight: approx. 2.52 kg Hjdpfxowwviie Abyen Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Should you require transportation or shipping of this item, additional costs will apply, which can be inquired about individually depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Included in the scope of delivery: 01x Deep beam, used Material color: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm For upright depth: approx. 1,100 mm Clear support spacing: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Beam support width: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Hjdpfxswwuchj Abysn Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping of this item beyond collection is subject to additional costs, which can be inquired with us separately depending on the place of delivery and scope of delivery.

Kondisi: baik (bekas), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Impact protection guardrail, used Hsdpfx Abehputheyon Total length: approx. 2,575 mm Clear span: approx. 2,400 mm Total height: approx. 600 mm Comprising per unit: 02x Frame profiles, used Material color: blue Profile dimensions: approx. 100 x 79 x 3.0 mm Clear width: 2,300 mm 02x Posts, used Material color: hot-dip galvanized Total height: approx. 600 mm Including 2 welded-on base plates: approx. 200 x 80 x 10 mm Box section: 90 x 90 mm Weight per unit: approx. 15.00 kg Base plate: approx. 200 x 200 x 10 mm Bolt hole diameter: approx. 15 mm General information regarding this item: This item is offered for collection only. Should you require transportation or shipping of this item, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery. Our range of services at a glance: (Prices on request) Assembly and installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Kondisi: baik (bekas), The scope of delivery includes: Hjdpfx Aboi Dr S Ejyon 01x Depth beam, used Material color: Sendzimir galvanized Total length: approx. 1,020 mm Suitable for frame depth: approx. 1,000 mm Material thickness: approx. 2.40 mm Clear support span: approx. 880 mm U-profile dimensions: 58 x 50 mm Beam support: approx. 67 mm Weight/piece: approx. 2.87 kg General information about the article: This item is offered for pickup only. Delivery or shipping of this item is subject to additional costs, which can be inquired with us separately depending on the delivery location and scope.

Kondisi: baik (bekas), Technical Data for Depth Beam: Manufacturer: SSI Schäfer Included in delivery: 01x Depth beam, used Material colour: grey Hedpfxenl Dmko Abysn Total length: approx. 1,108 mm for frame depth: approx. 1,100 mm Clear support span: approx. 999 mm Beam support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight per unit: approx. 8.020 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Transport or shipping beyond this is associated with additional costs, which can be requested from us separately, depending on delivery location and scope of delivery.

Kondisi: sangat baik (bekas), Technical Data for Pallet Racking Upright: Racking System: Stow Type: Pal Rack NS Scope of delivery includes: Hodpfxok Uuv Sj Abyon 01x pallet racking upright, used Material finish: sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted lattice frame) Height: 9,650 mm Depth: 1,100 mm General information about the item: This item is offered for collection only. If transport or shipping is required beyond this, additional costs will apply, which can be quoted separately depending on the place of delivery and the delivery scope.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Hsdpfxemhhype Abysn

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Hodpfsmhh Dhex Abyon Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) Hsdpfx Abomhhx Ijyen - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Hsdpoh Ek Daefx Abyen Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Hsdpfx Abemhh Ansyen - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Hodpfxemhhf So Abysn Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Hedpfx Aomhhl Hobyon Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Hodpfomidyfox Abyjn Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing Hedpfx Aemkixwebyon - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany Hjdpfx Ajmhh Dtsbyen - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: baik (bekas), The scope of delivery includes: Hjdpfx Aboi Igcaoyen 01x rack connector, used Colour: blue Manufacturer: Polypal for rack spacing: approx. 545 mm Total length: approx. 610 mm Profile dimensions: U 50 x 15 mm Weight: approx. 0.650 kg per piece. General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs, which can be requested separately from us depending on the delivery location and scope.

Kondisi: sangat baik (bekas), The delivery includes: 01x Shelf connector, used Material finish: Sendzimir galvanized L-profile dimensions: 85 x 35 x 2.00 mm Total length: approx. 270 mm Clear width: approx. 198 mm Rack spacing: approx. 200 mm Weight: approx. 0.430 kg per piece Hodpfei Hn Uijx Abyon 04x Hexagon bolts, M8 x 20 8.8 04x Hexagon nuts, M8 04x Washers, M8 General information about the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will be incurred. These can be individually requested from us depending on delivery location and order scope.

Kondisi: baik (bekas), We offer here a second-choice cross brace (Tiefensteg) from the manufacturer SSI Schäfer for sale. The cross brace is suitable for a frame depth of 850 mm and a beam width of max. 50 mm. Included in the scope of delivery: 01x Cross brace, second-choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear support width: approx. 748 mm Technical data for the cross brace: Hjdpfohzt Epsx Abysn Racking system: SSI Schäfer Profile dimensions: C 60 x 40 x 8 mm Beam support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg General information about the item: This item is offered for collection only. If transport or shipping of this item is requested, additional costs will apply. These can be inquired with us depending on the delivery location and scope.

Kondisi: seperti baru (mesin pameran), Included in the scope of delivery: 01x Shelf connector, 2nd choice (new item) Manufacturer: Kimer Hedpfx Aernrdgebyon For shelf spacing: approx. 200 mm Material finish: Sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | each Note: This is a 2nd choice product, unused new item. 2nd choice means there may be dust deposits, minor scratches, or soiling present. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location and quantity.

Kondisi: baik (bekas), Paket pengiriman meliputi: 01x Batas pemisah standar, bekas Hodpfoyk E T Njx Abyen Warna material: galvanis sendzimir Panjang total: sekitar 2.440 mm Panjang bilah pemisah: sekitar 2.365 mm Tinggi total: sekitar 65 mm Tinggi pemisah: sekitar 38 mm Profil: 25 x 35 mm (T x L) sumbat pelindung satu sisi Berat / unit: sekitar 2,19 kg Kontak Anda di perusahaan kami: Tuan: Andre Evering Tuan: Mario Klöver Tuan: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Jika pengiriman atau pengangkutan diperlukan, biaya tambahan akan dikenakan sesuai lokasi pengiriman dan volume pesanan, yang dapat dikonfirmasi secara terpisah.

Kondisi: baik (bekas), Included in the scope of delivery: 01x Drop-in shelf grid, used Material color: hot-dip galvanized Total depth: 1,175 mm (bearing bar orientation) Clear support width: 1,097 mm Total width: 890 mm (cross bar orientation) Bearing bar dimensions: 50/1.80 mm Frame height: 50 mm Beam support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14.11 kg | unit Internal designation: GR-17 Note: - The grating shelves may show damage, scratches, dents, or weld marks. - Despite the 40 mm beam support, the drop-in shelf grids are suitable for a rack depth of 1,200 mm. Hjdpfx Abenh Rb Neyjn General information about the item: This item is only offered for collection. If transport or shipping of this item is required, additional charges will apply depending on the delivery location and scope of delivery. Please contact us for details.