Van atap tinggi MERCEDES-BENZ Sprinter 516 CDI KASTEN MAXI SORTIMO RWD/AHK3,5t

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Lrodpfx Aajh Ek Dao Ujl - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Iklan kecil

Vöcklabruck

10.845 km

Penumpuk palet
BTSWE 100

€1.950

Hubungi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 2.444 h, kapasitas angkut: 1.000 kg, tinggi angkat: 2.700 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 1.850 mm, panjang garpu: 1.150 mm, jenis penggerak: Elektro, Hand pallet stacker tinggi Titik berat beban: 600 Tipe mast: Duplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: Baik Jenis ban depan: Poliuretan Jenis ban belakang: Poliuretan Tegangan baterai: 24V Tipe baterai: Lithium-ion Tahun pembuatan baterai: 2019 Deskripsi: Lrodpsvtu A Ujfx Aa Ujl Pengisi daya terintegrasi, platform pengemudi dapat dilipat

Rak tugas berat
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm

Iklan kecil

Rak tugas berat Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

10.973 km

€1.990

Rak kantilever
Kragarmregal doppelseitig Höhe 3.500 mmTiefe je Seite 1.200 mm / Länge 4.000 mm

Hubungi

Iklan kecil

Rak kantilever Kragarmregal doppelseitig Höhe 3.500 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Bad Feilnbach

10.973 km

€3.130

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Lrjdpsmkixwofx Aa Ujl - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Truk bak dump tiga sisi
MANTGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Iklan kecil

Truk bak dump tiga sisi MAN TGM 18.320 4X4 BB Krankipper Palfinger PK 12.501

Bobenheim - Roxheim

11.200 km

€169.800

Hubungi

Kondisi: bekas, jarak tempuh: 250 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 09/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, filter jelaga, pendingin udara, penggerak semua roda,

Rak tugas berat
Kragarmregal einseitig Höhe: 3.500 mmNutztiefe: 1.200 mm / Länge: 4.000 mm

Iklan kecil

Rak tugas berat Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

10.973 km

€2.170

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Lrsdsmhh Dhjpfx Aa Ujl - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Stahltreppe
StahlHöhe 2140 mm Geländer beidseitig

Iklan kecil

Stahltreppe Stahl Höhe 2140 mm Geländer beidseitig

Wiefelstede

11.134 km

€950

Truk bak dump tiga sisi
MANTG-S 18.360 4x4 BL 2-Achs Allradkipper Kran Funk

Hubungi

Iklan kecil

Truk bak dump tiga sisi MAN TG-S 18.360 4x4 BL 2-Achs Allradkipper Kran Funk

Peine

11.013 km

€84.900

Hubungi

Kondisi: bekas, jarak tempuh: 237.089 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 03/2016, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 02/2026, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, volume ruang muat: 6 m³, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, penggerak semua roda, sistem navigasi,

Rak Pallet Racking Rak Rak Tinggi
Hovuma/ 11,95 lfm/ Ständer:6.640 x 870 mm/ Traverse: 2.880 mm

Iklan kecil

Rak Pallet Racking Rak Rak Tinggi Hovuma/ 11,95 lfm/ Ständer: 6.640 x 870 mm/ Traverse: 2.880 mm

Neukamperfehn

11.169 km

€1.986

Hubungi

Kondisi: baik (bekas), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,945 mm Number of bays per rack row: 04 pcs. à 2,880 mm Number of levels incl. ground level: 04 pcs. Scope of delivery includes: 05x pallet rack uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Including horizontal and diagonal braces, base plates The uprights are pre-assembled (welded truss design) 6,640 mm high 870 mm deep 32x pallet rack beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per pair of beams: 1,600 kg (with evenly distributed load) 64x locking pins, used Design: fully galvanized For securing the cross beams against accidental lifting 20x heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Lodpfx Aaoi D Em Ao Uorl Approved for: non-cracked concrete Through bolt fastening: M 12-13/95 10x leveling plates, used Design: fully galvanized For leveling rack uprights that are installed on uneven floors 01x load rating sign with details on bay and shelf loads, manufacturer, and commission number Dimensions: 80 x 220 mm

Rak palet tegak di gudang teluk tinggi
Meta (Thyssen) Multipal SAbm.: 7.000 x 500 mm

Iklan kecil

Rak palet tegak di gudang teluk tinggi Meta (Thyssen) Multipal S Abm.: 7.000 x 500 mm

Neukamperfehn

11.169 km

€193

Hubungi

Kondisi: baik (bekas), Data teknis rak palet: Sistem rak: META (Thyssen) Tipe: Multipal S Termasuk dalam pengiriman: 01x Tiang rak palet, bekas Warna material: galvanis sendzimir Tipe tiang: SR 85|20 Dimensi profil: 85 x 75 x 2,0 mm Termasuk pengikat melintang dan diagonal, pelindung tiang dan plat dasar Tiang sudah terakit sebelumnya (konstruksi baut) Tinggi: 7.000 mm Kedalaman: 500 mm Lrsdjyz Tczjpfx Aa Uel Kontak di perusahaan kami: Bapak Andre Evering Bapak Mario Klöver Bapak Falk Deutsch Informasi umum mengenai artikel: Artikel ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau transportasi lebih lanjut dapat dilakukan dengan biaya tambahan, yang dapat ditanyakan secara terpisah tergantung lokasi pengiriman dan volume pesanan.