Rak palet tegak di gudang teluk tinggi

Meta (Thyssen) Multipal S Abm.: 7.000 x 500 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Isdpfx Aaoh Ek Dao Doaw Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: sangat baik (bekas), Dexion P90 pallet racking. Racks in very good condition. We offer approximately 30,000 pallet spaces. Frames available in the following heights: 6000/1100 - €98, 7000/1100 - €115, 8000/1100 - €130, 9000/1100 - €147. Beams: BX 120/40/13/2700, 2400kg load capacity, €17 each; BX 100/50/15/2700, 2850kg load capacity, €18 each; BX 60/40/13/2700, 900kg load capacity, €14 each. Invoices issued. We invite you to cooperate with us. Iaodohq Dd Topfx Aa Dsw

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Iajdemhhypopfx Aa Dew

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg Iodpfx Asmkixwja Dsaw - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: bekas, jarak tempuh: 250 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 09/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, filter jelaga, pendingin udara, penggerak semua roda,

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic carton sealing machine for tops/lids. Efficient, fast, and precise sealing and taping (one direction) of identical carton sizes in series. Specifications: Carton size in mm: L(200-600)xW(150-500)xH(100-500); max. machine cycle rate unloaded: 20 cycles/minute; Power supply: 220/380V, 0.3kW; Tape width in mm: 48/60/75; Machine dimensions: L1770xW850xH1520mm; Weight: 250kg. Iodjv Nkv Aspfx Aa Deaw Please note that our new prices are frequently lower than typical used equipment prices. Feel free to enquire and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times, starting from approx. 3 weeks. – All machines come with a full warranty.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Ijdpomhh Dhefx Aa Deaw Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 25/111/615/18, Medium-Diameter Wood Cutting Line Circular Sawmill - Minimum log diameter: 120 mm - Maximum log diameter: 400 mm - Minimum log length: 1,500 mm - Maximum log length: 3,200 mm - Feed speed: 7.5–24 m/min - Main motor power: 75 + 90 kW - Saw blade diameter: 600 mm Multi-blade Saw WP210 - Maximum cutting height: 210 mm - Minimum cutting height: 30 mm - Maximum cutting width: 500 mm - Minimum cutting length: 1,500 mm - Feed speed: 5–25 m/min - Main electric motor power: 2x75 kW - Saw blade diameter: 350 mm The line comprises: Log Feeder PK2200 Prismatic Roller Conveyor Track-type Circular Sawmill TT5/600/400 G Control Panel Roller Table with Side Board and Slab Discharge Mechanism 4m Powered Roller Table Reference Roller Table SB4000 Multi-blade Saw WP210 Belt Conveyor L=25,000 Iedpfx Asvdtzqja Djaw More information is available via the provided email address or by phone. The line can be presented Monday to Friday, between 08:00 and 16:00.

Kondisi: bekas, nomor mesin/kendaraan: 006619, 1 Iaodpfx Aaoqy Em Ns Djw

Kondisi: baik (bekas), stahltreppe-20240619 Iasdpfx Aajrg Ivbo Dsw