Beli Bandsaw Horizontal bekas (6.807)

Kondisi: bekas, Horizontal mitre band saw in swivel-frame design JAESPA Type W 320 G Serial No. 18793 / 99 Year of manufacture: 1999 Cutting capacity at 90° (Round): Ø 320 mm Cutting capacity at 90° (Square): 320 x 320 mm Cutting capacity at 90° (Flat): 460 x 200 mm Bwedpfxewwaz Ao Ah Ujw Cutting capacity at 45° (Round): Ø 290 mm Cutting capacity at 45° (Flat): 290 x 220 mm Cutting capacity at 45° (Square): 240 x 240 mm Cutting capacity at 30° (Round): Ø 200 mm Cutting capacity at 30° (Square): 200 x 200 mm Cutting capacity at 30° (Flat): 220 x 200 mm Saw blade dimensions: 4120 x 27 x 0.9 mm Saw blade speed: approx. 50 m/min Material infeed height: approx. 630 mm Saw motor power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Quick miter adjustment via swiveling saw frame with rotary table and clamping - Infinitely variable miter cuts from 30° to 90° - Hydraulic saw frame movement with rapid approach and automatic return after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated into machine base - Emergency-stop mushroom push-button Space requirements (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirements: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency inverter hydraulic semi-automatic GBS 250 Super HA-I Easy - Mitre cuts left 60° / right 45° - Material height sensor (automatic cut start detection) - Frame and gearbox cast in one piece, extremely quiet and low-vibration operation - Hydraulic vise, laterally adjustable - Guided, high-quality industrial bearings - Heavy-duty vise and machine casting - Large machine bed - Machine base with tool compartment and chip drawer - Cut monitoring via ammeter - Feed regulator for cutting pressure - Feed roller (infeed side) Bsdpfjfn Andsx Ah Ueww - Ball bearing turntable Semi-automatic operation: 1. Clamp material 2. Start the saw 3. Rapid downfeed to material start, or for serial cuts, begin cutting immediately 4. Switch off saw blade 5. Raise frame just above the material 6. Open vise

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Bwodpsfgyh Hjfx Ah Ujw Total power requirement: 1.1 kW Machine weight approx. 0.4 t The Z252/DGH features the following equipment: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Coolant pump - Base frame - Saw blade - 400V plug, 16A The machine is delivered fully assembled and ready for immediate use.

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Bwsdpefgyh Tefx Ah Uow Machine weight approx. 0.42 t Double-mitre metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 500 mm Cutting capacity at 90°: square 420 mm Cutting capacity at 90°: rectangular 600x400 mm Saw band dimensions: 5320 x 34 x 1.1 mm Band speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Bedpsupxupefx Ah Ujww Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre cuts left & right up to 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free, ball-bearing supported rotary material table • Saw band guides adjustable via extra-wide linear guide • Heavy-duty, robust gearbox • Large clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Freestanding, safe, and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure regulator valve • Material height sensor (automatic cut start detection) • Ultra-fast clamping (front loading) • Hydraulic control for saw frame and vice • LEDs to monitor all safety functions • Minimum cutting capacity, round, from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw operation 3. Rapid downfeed to material or, for serial cuts, start cutting directly 4. Stop saw band 5. Raise frame just above material 6. Open vice

Kondisi: baru, Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 400 x 310 mm Saw blade length: 3820 x 34 x 1.1 mm Blade speed: 22 – 88 m/min Table height: 930 mm Total power requirement: 2.2 kW Machine weight approx. 0.8 t Space requirement approx. 2.22 x 1.2 x 2.1 m PROMOTION double mitre band saw, hydraulic semi-automatic • Mitre cuts left 60° / right 45° Bwedpfowinykox Ah Usw • Industrial-grade hydraulics • Optimal material access • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting accuracy • Hydraulic vise opens/closes • Material turntable with ball bearings • Quick-release, movable vise • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed lowering until material detected 4. Stop saw blade 5. Raise frame just above material 6. Open vise

Kondisi: baru, Cutting diameter 227 mm Bandsaw blade length 2455 mm Table height 840 mm Cutting width 260 mm Speed range: 36 / 72 m/min Bandsaw blade dimensions 2455 x 27 x 0.9 mm Cutting capacity at 90 degrees: round 227 mm Cutting capacity at 90 degrees: square 220 mm Cutting capacity at 90 degrees: flat 260 x 220 mm Bodpfxsfgyh Ee Ah Uoww Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 45 degrees: flat 200 x 220 mm Total power requirement 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre Bandsaw - Automatic cutting - Base frame - Coolant pump - Chip brush for cleaning the saw blade - Vice with quick adjustment

Kondisi: baru, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Bodpfx Ahsfgyh Ns Uoww Machine weight approx. 240 kg Required space approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut, the machine stops automatically via a safety limit switch. The lower travel can be steplessly adjusted by means of a hydraulic system. Raising the saw arm after the cut can be performed to any desired position, where it will remain securely in place. The Z241/R comes equipped with: Hydraulic cylinder, emulsion pump, eccentric clamp, base frame, saw band, 400V plug (16A). The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting range at 90 degrees: round 255 mm Cutting range at 90 degrees: square 240 mm Bwsdpfx Ajfgyh Uoh Uow Cutting range at 90 degrees: rectangular 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 18 - 110 m/min Total power requirement 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-miter metal band saw, frequency inverter hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° / right 45° • Material height sensor (automatic cutting start recognition) • Frame and gearbox made from a single casting, very quiet operation and extremely low vibration • Hydraulic vice, laterally adjustable • Precision-guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable hydraulic feed pressure • Infeed support roller • Ball-bearing-mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid traverse to material or, for serial cuts, start cutting immediately 4. Switch off saw blade 5. Raise frame to just above material 6. Open vice

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length: 3375x27x0.9 mm Band speed: 18 - 100 m/min Table height: 940 mm Total power requirement: 1.5 kW Machine weight: approx. 0.65 t Bwedefgyiajpfx Ah Uew Space requirement: approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, semi-automatic hydraulic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Robust, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller Bsdpfx Ahjfgyics Uoww · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Band Saw K-tech DG 50/33 HA-I - 2-column miter band saw - Robust, yet easy to operate - Material height sensor (automatic cut start recognition) - Smooth running due to inclined cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (can be disinfected) - Energy-saving and low vibration thanks to angled cutting - Ergonomic, secure, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter drive wheels (520 mm) - Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid downfeed until material is detected or immediate cutting for serial production Bwodpjfg E Hljfx Ah Ujw 4. Stop saw band 5. Raise frame just above the material 6. Open vice

Kondisi: baru, en-GB: Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor Bwsdpfx Ajd Iipxeh Uow - Ball-bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Bjdpfxed Iip Nj Ah Usww SPECIAL OFFER PRICE!!! Double mitre metal band saw featuring: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Bedpsurc S Rjfx Ah Usww Double mitre metal bandsaw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Solid, large material support - Automatic coolant system

Kondisi: baru, Cutting diameter: 250 mm Band saw blade length: 2950x27x0.9 mm Table height: mm Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Required space: approx. m Absolute special price!! EUR 7,170 (Current price from 2024 is EUR 9,425) Standard equipment: - Vice with quick adjustment and adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator Bsdpfofg E H Njx Ah Usww - Base frame with removable coolant tray - Chip removal brush - Pre-set precision stops for cuts at: 0°, 45°, and 60° left, and 45° right - Swivel table for double miter cuts - Electric coolant system 48 V (Option to fit a micro-spray device)

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Bwsdpfshpktvjx Ah Uew The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade dimensions 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Vice laterally adjustable Bsdpfx Aonq Saneh Ueww - Solid, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double-mitre metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter Bsdpfx Aefgyh Ssh Usww - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release vice, movable - Quick-action lever - Automatic coolant system

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Bsdpfefg E Hpex Ah Uoww Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Schnitt area at 90 degrees: round 310 mm Cutting area at 90 degrees: square 280 mm Cutting area at 90 degrees: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirements: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double mitre bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy - Mitre left 60° / right 45° - Industrial hydraulics, powerful 18 bar - Best material access - Ammeter for monitoring: - Cutting force optimization - Blade life - Cutting performance - Hydraulic vice opens/closes - Chip cleaning brush - Material turntable with ball bearings - Quick-release vice, movable - Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or, for serial cuts, begins cutting immediately Bsdpfxed Iiptj Ah Uoww 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Kondisi: bekas, Tahun pembuatan: 1998, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular Saw band dimensions: 2965 x 27 x 0.9 mm Table height: mm Bwjdpfxou Sbpvj Ah Uow Band speed: 37 / 76 m/min Total power requirement: 1.0 kW Machine weight: approx. 0.38 t Required space: approx. 1.0 x 1.6 x 1.4 m Double mitre bandsaw

Kondisi: baru, Cutting diameter 185 mm Saw band length 2,085 x 20 x 0.90 mm Table height 920 mm Band speed 35 + 70 m/min Connection voltage 400 V Total power requirement 0.8 kW Machine weight approx. 200 kg Berg & Schmid - Metal Bandsaw GBS 185 Eco AutoCut Extremely fast and smooth cutting thanks to improved drive technology - Mitre cuts up to 60° to the left - Suitable for both dry and wet cutting - Coolant system Bedpfjvn Uzaex Ah Uoww - Machine base

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate Bwsdpfx Ahed Iipme Uow • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure feed regulator Bsdpfsd Iip Rjx Ah Usww - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release, movable vice - Quick-release lever - Automatic coolant system Shipping cost share: €120