Beli Bandsaw Horizontal bekas (7.179)

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre bandsaw K-tech DG 50/33 HA-I • 2-column mitre bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start recognition) • Smooth operation due to inclined cut, feed regulator and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (can be sanitized) • Energy-saving and low-vibration thanks to inclined cut • Ergonomic, safe, and free-standing control panel • Frequency-controlled sawing drive, 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimension drive wheels (520 mm) each • Clear mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Switch saw on 3. Rapid descent to start of material or commence cut immediately for serial cuts 4. Switch off saw band Pjdpfefg E Hljx An Isgr 5. Raise frame slightly above material 6. Open vice

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption Podefg E H Ujpfx An Ijgr * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Cutting diameter 240 mm Saw band dimensions 2730 x 27 x 0.9 mm Table height 920 mm Cutting speed 35 + 70 m/min Cutting capacity at 90° round 240 mm Cutting capacity at 90° square 230 mm Cutting capacity at 90° rectangle 270 x 230 mm Podpfx Aned Iip Sj Iogr Cutting capacity at 45° round 210 mm Cutting capacity at 45° square 200 mm Cutting capacity at 45° rectangle 200 x 210 mm Cutting capacity at 60° round 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 60° flat 130 x 160 mm Total power requirement 1.2 kW Machine weight approx. 0.26 t Required space approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with quick-release mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet operation and minimal vibration • Electronic monitoring of blade tension and blade breakage, with saw blade cover • Carbide saw band guides • Large machine bed • Machine base (supplied disassembled) with automatic cooling system The AutoCut system consists of: Hydraulic cylinder, feed control, spring package, limit switch Automatic lowering of the saw frame via the hydraulic cylinder, infinitely variable feed adjustment, with limit switch at the end of the cut. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal feed rate (e.g., for scribing). Manual operation: The hydraulic cylinder acts as a brake cylinder (e.g., for notching). Using the brake cylinder, the saw can be positioned at any point during the return stroke.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator Pgodpfxofgyice An Ier · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal bandsaw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Hydraulically operated, laterally adjustable vice • Guided, high-quality industrial bearings • Heavy-duty vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Support roller (entry side) • Ball-bearing turntable Podpfefgyh Uex An Iogr Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid downfeed to the workpiece or direct cutting in case of series cuts 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Kondisi: baru, Tahun pembuatan: 2025, de-001 Podpfsy S Drzex An Isgr

Kondisi: baru, Tahun pembuatan: 2025, vágási_átmérő_650_mm Podoy S Duijpfx An Isgr

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter: 650 mm Saw band length: 8200 x 54 mm Cutting width: 1.6 mm Cutting capacity at 90° - rectangular: 650 x 850 mm Cutting capacity at 90° - square: 650 x 650 mm Total power requirement: 5.5 kW / 2775 Nm Machine weight: approx. 6,400 kg Space requirement: approx. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic, column-guided horizontal bandsaw. Standard features: - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch Pedpfx Aeyk Ikqsn Ijgr - Back gauge system - Automatic ball screw lubrication - LED lighting - Chip conveyor - Chip transport - 1400 mm feed drive - Double roller table - Material end detector - Program memory system - USB port output - PLC control & touchscreen - Frequency inverter Optional features: - Laser line - Oil mist lubrication - V-shaped vice - Extra double roller table - Top clamping system - Curve cutting detection sensor Images are for reference only and do not represent a true-to-scale depiction of the machine.

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder Podpfshpktvjx An Isgr - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, en-GB Podpfxsd Iipms An Ijgr

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Psdpfx Ansfg E H Re Isgr Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Pgsdpfx Anefg E H Ts Ijr Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Pjdpfefg E H Iex An Isgr Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, a18fc7db Podpfep Scqyex An Iogr

Kondisi: baru, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total connected load: 1.8 kW Machine weight approx.: 450 kg Pedpfefn Andjx An Ijgr Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double mitre metal band saw, frequency-controlled hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single unit, ensures extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Robust vice and machine frame, heavy-duty cast construction • Large machine base • Integrated tool compartment and chip drawer in machine substructure • Cutting monitoring via ammeter • Adjustable feed regulator for cutting pressure • Infeed roller • Ball bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or cut straight away for series cutting 4. Switch off saw band 5. Raise frame to just above material 6. Open vice

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 7.765 h, Mesin Gergaji Pita Logam Otomatis Penuh Behringer HBP 263 AG (2008) Produsen: Behringer Tipe: Mesin Gergaji Pita Logam Otomatis Penuh HBP 263 AG Pedpfx Anezwhdps Ijgr Tahun Pembuatan: 2008

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Podpfofg E Ibjx An Iogr Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, msk-tmpl-001 Pgodpfxjwirpvs An Ior

Kondisi: baru, Cutting capacity at 90 degrees: round 310 mm Cutting capacity at 90 degrees: square 280 mm Cutting capacity at 90 degrees: rectangle 400x250 mm Saw blade length: 4020x34x1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirements: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter left 60° + right 45° • Industrial hydraulics, high performance 18 bar • Optimal material access • Ammeter for monitoring: - Cutting force optimization - Blade service life - Cutting precision • Hydraulic vice opens/closes automatically • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw blade 3. Fast downfeed to material or for series cuts, start cutting directly 4. Stop saw blade 5. Raise saw frame just above material 6. Release vice Pgodpfx Aod Iipten Isr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Horizontal bandsaw 2000x800mm Year of manufacture: 2014 Pgodju N Aykspfx An Isr Price: €1,850.00 Contact person: Mr. Rainer Eckerle

Kondisi: bekas, Heat exchanger shell and tube horisontal bekas Kleiser GmbH, luas permukaan sekitar 16m². Unit dilengkapi dengan 68 pipa stainless steel 316L, panjang sekitar 3.000mm dan diameter luar 25mm, tekanan desain 6 bar pada 100°C. Shell terbuat dari stainless steel 316Ti, panjang sekitar 3.000mm dan diameter 324mm, tekanan desain 6 bar pada 100°C. Terdapat dua header dari stainless steel 316Ti. Unit dilengkapi dua penyangga. Berat: Perkiraan: 690 kg. Pjdpfxjyh I Unj An Isgr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, DETALLES TECNICOS Psdpfx Ajxfka Nen Isgr

Kondisi: bekas, Tahun pembuatan: 1987, nomor mesin/kendaraan: 33879, Stehendbogenauslage – Horizontale Bogenauslage mit Pressung Stahl SBP 46, Baujahr 1987 – Serien-Nr. 33879/87-134584 Online-Videoinspektion per Skype-Video möglich Ein Besuch würde uns sehr freuen – Weitere Maschinen auf Lager Pgjdpsh Aygfsfx An Ier Sofort verfügbar – Besichtigung möglich Lagerort Emskirchen / Nürnberg – Testlauf möglich

Kondisi: bekas, Tahun pembuatan: 1973, nomor mesin/kendaraan: 959, Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Psdpfx Ansrmul Ss Iegr Year of manufacture: 1973 - Serial No. 959 - Maximum working width: 590 mm - Spare saw blade included - Stepless height adjustment of the saw band - Stepless adjustable drive Online video inspection via Skype available. We would be very pleased to welcome you for a visit – more machines in stock. Available immediately – can be inspected. Located in Emskirchen / Nuremberg – test run possible.

Kondisi: baru, Cutting range round 0°: 127 mm Cutting range flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting range square 45° right: 90 x 90 mm Cutting range round 60° right: 45 mm Cutting range square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Pgsdpfx Anoilk Eko Ier Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting pipes, profiles, and solid materials made of stainless steel, iron, etc. - Rigid saw arm ensures low-vibration operation - Low-noise thanks to robust design - Automatic shut-off at end of cut via micro limit switch - Quick-release vice for fast and easy workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - Eco-friendly: does not require the use of lubricants or coolant fluids - Lightweight, ideal for use on construction sites - Base frame optionally available (not included in delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available separately: 129 euros net (special price)