Beli Cnc Turning Center bekas (22.177)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 8.977 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MM0008-000192, panjang pembubutan: 1.020 mm, diameter pembubutan: 540 mm, daya motor spindle: 22 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 76 mm, jarak pergerakan sumbu X: 565 mm, jarak lintasan sumbu Y: 170 mm, jarak gerak sumbu Z: 1.050 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 26 m/menit, pergerakan cepat sumbu Z: 36 m/menit, kecepatan rotasi (maks.): 12.000 rpm, jenis arus masuk: tiga fasa, saluran batang: 76 mm, tinggi total: 2.805 mm, panjang total: 4.850 mm, diameter luar chuck: 210 mm, lebar total: 2.525 mm, Diameter batang (maks.): 65 mm, diameter ayun di atas peluncur silang: 270 mm, hidung spindel: A2#6, diameter ayun di atas peluncur melintang: 750 mm, berat keseluruhan: 12.000 kg, diameter ayunan di atas alas atas: 540 mm, diameter spindel: 110 mm, Perlengkapan: dokumentasi / manual, Lingkungan Mesin Mastercam DOOSAN PUMA MX2100ST Lisensi tambahan Mastercam Mill 3D tersedia dengan biaya ekstra Pemilik menjual pusat bubut-milling DOOSAN MX2100ST kontrol FANUC 31i-B dengan 9 sumbu, diproduksi tahun 2020, dengan jarak hayun di atas tempat tidur 750 mm dan panjang kerja maksimum 1020 mm. Mendukung diameter kerja batang hingga 65 mm dan memiliki pergerakan sumbu Y, A, C1, C2, dan B yang lengkap untuk kemampuan pemesinan yang fleksibel. Terdapat spindle milling dengan tipe Capto C6, daya 18,5 kW dan 12.000 RPM serta carousel alat 40 posisi. Laporan perawatan dan kondisi teknis mesin dapat diperoleh dari dealer lokal atas permintaan. Hnjdpjxr Utmsfx Aa Nog

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A8A R19 52, panjang pembubutan: 225 mm, diameter putar di atas sled silang: 250 mm, diameter pembubutan: 80 mm, daya motor spindle: 4.400 W, kecepatan spindel (min.): 300 rpm, kecepatan spindel (maks.): 6.300 rpm, lubang spindel: 25 mm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 300 mm, Diameter batang (maks.): 25 mm, gores kuas bulu: 50 mm, Perlengkapan: dokumentasi / manual, Info tambahan: turret alat 12-stasiun untuk alat quick change VDI16, logika dua arah untuk alat berputar. Hnsdpfsxvb Thex Aa Neg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 500 mm, diameter putar di atas sled silang: 290 mm, diameter pembubutan: 240 mm, kecepatan spindel (maks.): 5.500 rpm, lubang spindel: 73 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 525 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 23 m/menit, pergerakan cepat sumbu Z: 30 m/menit, jenis arus masuk: tiga fasa, torsi: 192 Nm, berat benda kerja (maks.): 30 kg, tinggi total: 1.829 mm, panjang total: 4.066 mm, lebar total: 2.583 mm, lubang collet: 73 mm, Diameter batang (maks.): 73 mm, diameter ayun di atas peluncur silang: 290 mm, hidung spindel: FL 140h5, berat keseluruhan: 4.300 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, DMG MORI CTX alpha 500 V5 tahun 2015 ini dalam kondisi sangat baik dan mencatat 7040 jam spindle. Mesin ini pada tahun 2020 telah dilengkapi dengan sistem otomasi BMO tipe Iridium Ir 25F, namun sejak saat itu penggunaannya dalam produksi sangat terbatas. PERHATIAN! Dua panel dengan sensor laser/gerak tidak tampak pada foto, namun tentu saja tersedia. CTX alpha 500 ini dilengkapi dengan: - Otomasi BMO Iridium Ir25F (2020). Hedpfxsx Rqwho Aa Njng - LNS Quick Load Servo III barfeeder (2016). - Chuck berkendali Schunk Rota THW plus dengan sistem quick change jaw. - Berbagai ragum tambahan. - Software DMG CELOS. - Konveyor serbuk sisa/serpihan. - Penangkap/penyedia benda kerja. - Lengan pengukur alat. - Pedal kaki untuk penjepitan/pembebasan chuck. - Berbagai tooling (bergerak dan statis). - Dokumentasi asli DMG.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 43.841.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0030000534A, diameter putar di atas sled silang: 350 mm, diameter pembubutan: 250 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, kecepatan rotasi (maks.): 5.500 rpm, saluran batang: 65 mm, diameter luar chuck: 225 mm, Perlengkapan: dokumentasi / manual, Mesin bubut CNC DMG Mori CLX350 V4 Tahun pembuatan: 2019, kontrol DMG Mori Slimline / Siemens Shopturn Jam spindle: sekitar 1500 jam, jam operasi: sekitar 4500 jam Hnedsx Tpwfjpfx Aa Nog Termasuk sumbu Y dan alat berputar VDI30 serta sumbu C Pengukuran alat otomatis pada mesin menggunakan Tooleye Chuck rahang tiga SMW Autoblock KNCS 225/66 dengan berbagai jenis rahang Chuck collet: SMW Autoblock Diameter spindle: 65mm, kecepatan: 5000 rpm spindle, 5500 rpm alat berputar Filter pendingin ganda Disiapkan untuk bar feeder Pompa pendingin tekanan tinggi, tekanan cairan pendingin 12 bar 6 alat berputar, 3x vertikal / 3x horizontal Revolver alat dengan 12 posisi, semua posisi dapat digerakkan Tool holder VDI30 Berbagai dudukan alat dengan berbagai alat

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Pemesinan dengan alat berlian pada kecepatan hingga 3 mm/menit dan biaya satuan hingga 56% lebih rendah dibandingkan dengan EDM. Hodpfxsx Tpibs Aa Nsng

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 1.427 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 500 mm, diameter pembubutan: 380 mm, daya motor spindle: 26.000 W, kecepatan spindel (min.): 35 rpm, kecepatan spindel (maks.): 4.000 rpm, lubang spindel: 91 mm, jarak pergerakan sumbu X: 234 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 21 m/menit, pergerakan cepat sumbu Z: 33 m/menit, torsi: 465 Nm, saluran batang: 80 mm, berat benda kerja (maks.): 400 kg, tinggi total: 1.857 mm, panjang total: 6.650 mm, lebar total: 1.845 mm, Diameter batang (maks.): 80 mm, berat keseluruhan: 5.950 kg, Perlengkapan: dokumentasi / manual, Mazak QUICK TURN 250MSY – Complete Package incl. Bar Feeder – As New (YOM 2024) Description & Reason for Sale: For sale is a state-of-the-art Mazak QT 250MSY (year of manufacture: end of 2024) in absolutely full configuration. The machine is optimized for fully automated complete machining from bar and is offered including an extensive, high-quality package of tooling and workholding equipment. After commissioning, we decided to sell the machine again as the control system’s operating concept differs significantly from that of our existing machine park and does not optimally fit our internal programming workflow. As we pursue a unified operating platform, we are offering this powerhouse for immediate sale. The Mazak is currently still integrated in our production process. Please note that operating hours may slightly increase up until the time of sale. Viewing under power and chip is possible at short notice by prior appointment. Technical Highlights: - Control: MAZATROL SmoothG (19" touchscreen) with Intelligent Safety Shield & collision protection. - Working area: Max. turning diameter 380 mm, turning length 500 mm, Y-axis travel 100 mm. - Main spindle: 26 kW, max. 4,000 rpm, C-axis (0.0001°), spindle bore 91 mm. - Sub spindle: 11 kW, max. 6,000 rpm, for fully automatic rear-side machining. - Turret: 12 positions (VDI), all driven (5.5 kW, 6,000 rpm). - Dynamics: Rapid traverse X/Y/Z: 30 / 10 / 33 m/min. Included Accessories & Automation: - Bar feeder: TOP Automazioni (Magic) short bar loader. - Workholding: 10” 3-jaw power chuck (main spindle), collet system (main spindle), collets Ø (25, 35, 40, 45, 50, 60, 65, 75, 80) - Various draw tubes and sleeves for different diameters. (16, 17, 21, 26, 31, 36, 41, 46, 51, 56, 61, 66, 71, 76) - Tool package: * Mazak standard toolholder package. - Driven WTO angle head for main and sub spindle. - 4-way tool holder, boring bar holder (main/sub), and 4-way boring bar block. - Additional options: Tool Eye (auto tool measurement), parts catcher, 15 bar high-pressure coolant, Mayfran chip conveyor (side discharge), and engraving function. Technical Data: - Year of manufacture: End of 2024 - Max. turning diameter: 380 mm - Max. turning length: 500 mm - Spindle bore: 80 mm (bar) - Main spindle power: 26 kW - Torque: 465 Nm - Weight: approx. 5,950 kg Hjdpjx Tcttefx Aa Njng - Dimensions: 6650 x 1,845 x 1,857 mm (incl. bar feeder & chip conveyor)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, panjang pembubutan: 515 mm, diameter pembubutan: 366 mm, kecepatan spindel (min.): 6.000 rpm, berat keseluruhan: 5.400 kg, CNC Mitsubishi MSX850/3 Sumbu C, chuck 160 mm 5 alat rotatif, kecepatan maksimum 10.000 rpm Turret 16 alat Kapasitas 515 x 386 mm Hnsdpfxsx Ttwvs Aa Neg Konveyor serbuk (chip conveyor)

Kondisi: bekas, Tahun pembuatan: 2003, de-hu-001 Hnodpoxiy Aujfx Aa Neg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DMG CTX 510 Hnsdsr Ak S Nepfx Aa Nog Sinumerik 840D Mesin dalam kondisi sempurna, dilengkapi dengan bar feeder dan sumbu C Jam kerja spindle: 6720 Lubang spindle: 95 mm Collet chuck Forkardt D=100 mm maks, saya juga memiliki collet chuck Hainbuch SK100 baru untuk mesin ini Holder alat VDI 40

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.500 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan rotasi (maks.): 4.000 rpm, berat keseluruhan: 14.400 kg, Mazak Integrex 300 3 ST Kontrol - Mazatrol 640 mt pro 2 spindel 1500 mm Tanpa CE 2005/05 dalam kondisi sangat baik Mesin bubut turret.....10 alat ATC.....40 alat Diameter ayun maksimum 33,5″ 850,9 mm Diameter ayun maksimum (penggunaan sumbu Y) 26″ – 33,5″ 660,4 mm – 850,9 mm Diameter ayun maksimum di atas lintasan silang 33,5″ 850,9 mm Diameter ayun maksimum di atas turret bawah 16,5″ 419,1 mm Hodpsx Rkvqefx Aa Njng Berlokasi di Israel dalam kondisi hidup dan siap inspeksi. CNC ini dibuat di Jepang dan memerlukan izin MATI.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 26.811 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: -, panjang pembubutan: 1.350 mm, diameter putar di atas sled silang: 715 mm, diameter pembubutan: 550 mm, daya motor spindle: 48 W, kecepatan spindel (maks.): 3.000 rpm, lubang spindel: 106 mm, jarak pergerakan sumbu X: 380 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 1.350 mm, diameter pemasangan: 12 mm, tinggi total: 2.346 mm, panjang total: 4.088 mm, lebar total: 2.129 mm, diameter ayun di atas peluncur melintang: 950 mm, berat keseluruhan: 10.400 kg, Machine haut de gamme équipée d'une commande Fanuc 32iTB. Nombreuses options, dont lunette à point fixe SMW Autoblok sur base servo programmable, arrosage centralisé via la lunette, système d'arrosage haute pression, porte latérale gauche élargie permettant l’usinage de pièces jusqu’à 920 mm de diamètre (950 mm maximum). Diverses autres options disponibles. Prix neuf en 2018 supérieur à 200 000 £. Hnjdpfjvz Ab Ujx Aa Njg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, CNC turning-milling center MTCUT T20MC Year of manufacture: 2011 Driven tools included Accessories included Technical Data: Working area • Max. turning diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z axis servo motor: 1.4 kW (1.8 HP) • Z axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) • X axis servo motor: 1.4 kW (1.8 HP) • X axis rapid traverse: 30 m/min (1181”/min) Spindle • Main spindle through-hole / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle for boring bar in 8” spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • 8” main spindle speed: Standard 4500 rpm Tool turret Hjdpfxsxtnhaj Aa Nsng • Type: Hydraulic clamping system • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) • Quill type: Fixed • Quill taper: MT No. 4 • Quill stroke: 100 mm (3.94”)

Kondisi: bekas, Tahun pembuatan: 1990, translation_001 Hedpjw I R Ndofx Aa Nsng

Kondisi: baik (bekas), Description: The machine is in good technical condition; testing is possible by prior arrangement. Control system – Siemens, including filtration unit. Bed incline, bed material, number of guideways: 45°, cast iron, 3 (4 with optional Y-axis). WORKING AREA (V1–V4): - Swing diameter over bed: 19.69 in - Swing diameter over cross slide: 11.42 in - Maximum turning diameter: 7.87 in - Distance between centers: 30.71 in - Maximum turning length: 19.69 in - Max. workpiece weight (unsupported, cantilevered): 35 lbs - Max. distance of the center of gravity of unsupported section from spindle face: 165 in - Max. workpiece weight clamped between centers: 100 lbs Hnedpfox Apkzox Aa Nsg - Travel in X-axis: 7.48 in - Travel in Y-axis (op.): 3.14 in (+/- 1.57) - Z1-axis travel: [data missing] - Z3-axis travel: [data missing] - Spindle axis height above floor: 20.67 in, 21.65 in, 39.26 in (38.77 + 1.18) MAIN SPINDLE: - Spindle nose (flat face): type FL 140h5 - Chuck (diameter): 6.69 in (opt. 8.26 in) - Bar capacity: 2.01 in - Spindle bore diameter: 2.87 in - Guide bush diameter: 2.05 in - Front bearing inner diameter: 3.94 in - Spindle bearing lubrication: grease - Power, max. 100/40% duty cycle: 20.82/36.20 hp - Speed range, 100% duty cycle: 6000 rpm - Speed range, 40% duty cycle: 6000 rpm - Nominal speed: 1500 rpm - Torque, max. 100/40% duty cycle: 93.72/125.46 ft-lb - Voltage type/range: AC/1 - Motor type: ISM52

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Maszyna w idealnym stanie. Możliwość inspekcji podczas pracy w dowolnym momencie. Hedorgpv Tspfx Aa Nsng

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 2 mm, Cnc GE Fanuc Series 31i-TB Hodpfx Aex S Eyasa Neng

Kondisi: bekas, Tahun pembuatan: 2008, translation-01 Hjdpfsttckmex Aa Njng

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, CNC lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and subspindle Hnsdox Hgl Hepfx Aa Nog Control: Mazatrol PC Fusion CNC 640T Technical data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Tool turret: Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time - 1st position: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Hsdpowp D Nbofx Aa Nong Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), 1 Hnjdpfsx Sywysx Aa Njg

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, The machine is in good condition. It is powered and can be inspected by appointment. Available: immediately Year of manufacture: 2014 Commissioning: January 2015 Operating hours: --> see picture Machine No.: 252 153 Control unit: Matrix II Travel X1/X2: 310 / 310 mm Rapid traverse X1/X2: 24 / 24 m/min Travel Y1/Y2: ±77 / ±77 mm Rapid traverse Y1/Y2: 10 / 10 m/min Travel Z1/Z2: 605 / 605 mm Rapid traverse Z1/Z2: 24 m/min Drive power: 19.5/22 kW Max. spindle speed: 4,000 rpm Tool turret: 2 x 12 stations Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Dimensions: 7,723 x 4,313 x 3,335 mm (L x W x H) Weight: 12,200 kg Voltage: 400V Fuse protection: 80A Note: The machine is equipped as standard with the 'Relocation Detector.' For recommissioning, the machine must be unlocked by Mazak. Options: - Y-axis - Gantry loader GL200F - Air blow device for workpiece transfer - Chip conveyor, rear discharge - Cylinder and polar interpolation (EIA) - High-pressure and return pump (original pumps included) Hnsdpfx Aei Ik Hkea Nog Accessories HD 1: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Accessories HD 2: - Power chuck Kitagawa B-210 - 3 turning tool holders - 3 boring bar holders - 1 axial milling and drilling head - 1 radial milling and drilling head - 4 covers Price: EXW (loaded onto provided truck) Furthermore, we offer a set of tool holders for this machine (see last picture). Note: separate item, not included in the machine offer. Comprising: Static holders: 2 pcs. external turning tool holders 13 pcs. facing tool holders 3 pcs. parting holders 5 pcs. boring bar holders Ø 32 2 pcs. boring bar holders Ø 40 8 pcs. boring bar holders Ø 50 23 pcs. reduction sleeves Driven tools: 2 pcs. axial drilling and milling head SK40 8 pcs. radial drilling and milling head SK40 3 pcs. radial drilling and milling head ER40 5 pcs. swivel head The original value of the entire package was approx. €85,000.00 Available: after sale of the machine Price (negotiable): €35,000.00 (incoterms EXW, excluding transport)

Kondisi: baik (bekas), Tahun pembuatan: 1989, jam operasional: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range longitudinal & cross: 0.5 – 5,000 mm/min Rapid traverse longitudinal & cross: 9 m/min Main drive: 30 kW Dimensions of the machine with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT display General Description: CNC manual input control with programming via function and numeric keypad. All data entry in dialog with the screen. Integrated menu navigation and plaintext display of all functions. Control keypad, screen, and handwheel in a separate chip guard hood. The EPL control offers the following possibilities: Programs can be entered and modified without prior programming knowledge, directly by operator guidance through the EPL control. NC programs in ISO/EIA format can be entered and output via serial RS 232 interface, or entered directly by hand. Machining Cycles: Roughing cycles for longitudinal, facing, and contour turning, also with excess allowance. Threading. Undercuts according to DIN 509 Form E and F and DIN 76, and programmable grinding allowances. Axial and radial grooves to DIN 471 and 472, also with bottom finishing. Radii at 90° and chamfers at 45°. Automatic tool nose compensation for cycles, undercut, groove, radius, and chamfer. Programming: Block-oriented, metric/inch, diameter input in absolute mode, radius in incremental mode, full circle programming, subprogram technology with skip levels for program sections. Zero point offset. Operating mode selection via menu. Program input and output: Hnodpfsvr Eh Ejx Aa Neg Dialog via menu with operator guidance or direct dialog input. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged-chip conveyor • 12-position VDI 40 tool turret, 6 standard tool positions + 6 driven tool positions • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for the main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 2001, Technical details: Turning diameter: 33 mm Turning length: 330 mm Control system: 840 Total power requirement: 20 kW Approx. machine weight: 6 t Hnsdpfxjw D Hh Ae Aa Nog Approx. space required: 3850 x 2000 x 2100 mm 17 axes 3 turrets with driven tools 1 gantry with driven tools Main and counter spindle with C axes Bar feeder Operating hours: 58,133

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 43.000 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a high-precision CNC turning-milling center Spinner TC300-52, manufactured in 2014. The machine is in excellent, well-maintained condition and was primarily used for the production of prototypes and small batches. It was never operated in heavy 3-shift continuous duty at maximum load, which is reflected in its outstanding mechanical condition. The machine is under power and ready for demonstration at the Freiburg location! The spindle hours are significantly lower than the machine's total running hours! Hjdsx Sr Uwepfx Aa Neng This package includes a substantial tool kit and a comprehensive range of tool holders, numerous collets for both main and sub spindles, and several reduction sleeves. The value of the included equipment alone (including many driven double tool holders) is approximately €15,000 to €20,000 if purchased new. This makes the machine an ideal solution for companies looking to immediately start complex production without tedious additional investments. Documentation: The original order confirmation, verifying all full equipment details, is available for inspection. - Location: 79115 Freiburg (DE) - Availability: The machine is under power for demonstration and immediately available. - Scope of delivery: Includes tool holders, collets, and complete documentation. • Year of manufacture: 2014 • Control: Siemens 840D SolutionLine with 15" color display and ShopTurn (dialog programming) • Working area: X 180 mm / Z 450 mm / Y +/- 40 mm • Spindles: Main spindle (5,000 rpm) & counter spindle (7,000 rpm) as water-cooled motor spindles • Turret: 12 stations (VDI25), all driven (up to 6,000 rpm) • Bar capacity: up to Ø 52 mm • Coolant system: Switchable 15 bar high-pressure pump for internally cooled tools. • Measurement systems: Integrated tool measuring arm for fast setup. • Clamping equipment: Collet chucks by SMW Autoblok (185E and 164E), including reduction tube. • Safety & convenience: Clamping force regulation via differential pressure on the sub spindle (ideal for delicate parts), parts catcher with collection box, and hinged belt chip conveyor. • Precision guiding system: Unlike standard machines, Spinner employs hardened and ground slideways on all axes. This ensures superior vibration damping, excellent surface finishes, and longer tool life. • Full equipment (all-inclusive): The machine features a Y-axis (+/- 40 mm) and a fully functional sub spindle, enabling complete machining of complex parts. • State-of-the-art measuring technology: Thanks to the absolute measuring systems (glass scale in X1), referencing after switching on is no longer required.

Kondisi: bekas, Tahun pembuatan: 2003, TD-DE-001 Hsdpex Dlhlofx Aa Njng