Beli Index Abc bekas (8)

Kondisi: bekas, Tahun pembuatan: 1998, IKHTISAR Kompresor piston tekanan tinggi tipe ABC 4HA-4-LT buatan tahun 1998 ini dirancang untuk menyediakan udara bertekanan pada instalasi mesin tiup botol PET. Kompresor ini diproduksi oleh ABC – Arizaga, Bastarrica y Cía S.A. dari Eibar, Spanyol. Mesin ini merupakan kompresor piston 4 tahap dengan kompresi silinder bebas oli dan tekanan nominal 42 bar. Penggerak utama menggunakan sistem penggerak sabuk (belt drive). Kompresor dipasang pada rangka baja dan dilengkapi dengan pipa penghubung antartahap, pemantauan tekanan, sambungan air pendingin, motor penggerak utama, pelindung penggerak sabuk, serta panel kontrol terintegrasi. Mesin ini dilengkapi dengan manometer analog untuk menunjukkan tekanan pada tahap akhir, tahap antar, serta tekanan oli. Panel kontrol memiliki lampu indikator untuk suhu, air, oli, relay termal, serta kesalahan pengering, juga pencatat jam operasi dan tombol pemutus darurat. DATA TEKNIS - Produsen: ABC – Arizaga, Bastarrica y Cía S.A. - Lokasi produsen: Eibar, Spanyol - Model / Tipe: 4HA-4-LT - Tipe mesin: Kompresor piston tekanan tinggi - Tahun pembuatan: 1998 - Aplikasi: Penyediaan udara bertekanan tinggi untuk mesin tiup botol PET - Sistem kompresi: Kompresi silinder bebas oli - Jumlah tahap kompresi: 4 tahap - Tekanan nominal: 42 bar - Tekanan udara pengaturan: 8 bar - Tekanan hisap: Tidak disebutkan - Kapasitas aliran: sekitar 546,9 m³/jam - Putaran kompresor: 725 rpm Hfodeziawrepfx Aa Dsi - Daya motor: 150 HP / 110 kW - Total daya instalasi: 158 HP / 115 kW - Sistem penggerak: Penggerak sabuk - Tegangan nominal: 380 V - Tegangan kontrol: 220 V - Frekuensi: 50 Hz - Diameter silinder tahap 1: 250 mm - Diameter silinder tahap 2: 160 mm - Diameter silinder tahap 3: 105 mm - Diameter silinder tahap 4: 75 mm - Langkah piston: 150 mm - Sistem pendingin: pendingin air - Aliran air pendingin: sekitar 6,5 m³/jam - Rentang suhu lingkungan: 0 – 40 °C - Rentang suhu air pendingin: 5 – 40 °C - Berat kompresor: sekitar 2.900 kg - Berat motor: sekitar 830 kg - Berat total instalasi: sekitar 7.230 kg - Tekanan manometer terukur: Tahap akhir: sekitar 42 bar, Tahap 3: sekitar 16 bar, Tahap 2: sekitar 6 bar, Tahap 1: sekitar 2 bar, Tekanan oli: sekitar 3,5 bar - Panel kontrol: Panel elektrik terintegrasi, diberi label T2/7 - Panel pengendalian: lampu status, pencatat jam kerja analog, dan tombol pemutus darurat - Indikator status: suhu, air, oli, relay termal, dan kesalahan pengering - Fitur keselamatan: pelindung penggerak sabuk/roda gila dan pemutus darurat - Desain: Kompresor multistage berwarna hijau dipasang pada rangka baja - Perlengkapan tambahan: pipa kolektor antartahap, separator/penampung vertikal, dan pipa overhead - Sertifikasi: Berlabel CE - Kondisi: Bekas, terpasang di lingkungan produksi industri - Catatan teknis: Kondisi fungsi, riwayat perawatan, suku cadang aus, serta komponen keselamatan pendingin dan tekanan tinggi harus diperiksa sebelum pengoperasian kembali.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 5.126 h, Fungsionalitas: belum diuji, daya: 3.500 kW (4.758,67 hp), berat keseluruhan: 43.200 kg, Unit kogenerasi lengkap berbahan bakar minyak/lemak. Motor listrik ABC 16VDZC-1000, alternator AVK DIG150L-6. Sistem lengkap termasuk sistem pengawasan manajemen dan semua perangkat periferal. Seluruh instalasi masih terpasang seperti kondisi aslinya dan dapat dikunjungi. Hubungi melalui email. Hfsdpfoy Hiuqsx Aa Dji

Kondisi: sangat baik (bekas), Compressor type: dry-running Revolutions per minute: 750 Discharge pressure: 42 bar Hfjdowcgc Ropfx Aa Dei Displacement: Number of cylinders/stages: 2/4 Free air delivery: 7.73 m³/min; 464 m³/h Motor power: 90 kW

Kondisi: baru, Tahun pembuatan: 2026, The illustrative photos show completed installations of the 4x7 spray booth for customers. The offer applies only to the spray booth without preparation area (Option to purchase a preparation zone on request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (triple-winged) - Service door: 640x1800 mm Hfedpfxer Ha Ehj Aa Doi - Structure: stainless steel - Heat exchanger: stainless steel - Panels: mineral wool filled - Total power: 16 kW - Fully grated floor - Air supply system: nozzle turbine 4.0 kW - 2 units - Exhaust system: electric turbine 5.5 kW – 1 unit - Ceiling lights: cassettes with LED fluorescent lamps, 32 pcs. - Side lights: LED panel 120x30 cm – 8 units. Output: 48 W – each 1000 lumens - Burner Riello 40 G20 95–213 kW - The booth is available in various colors

Kondisi: baru, Tahun pembuatan: 2026, • External dimensions: 7,200 x 5,200 x 3,800 mm • Internal dimensions: 7,100 x 5,100 x 3,100 mm • Entrance gate: 4,000 x 3,100 mm (four-winged) Hedpfom Tv I Aex Aa Defi • Service door: 640 x 1,800 mm • Structure: Stainless steel • Heat exchanger: Stainless steel • Panels: filled with mineral wool • Total power: 21 kW • Seating: inside/outside (following prior roofing of the cabin by the customer at their own expense) • Floor: fully ribbed • Air supply system: Jet turbine 5.5 kW – 2 units • Exhaust system: Jet turbine 7.5 kW – 1 unit • Ceiling lights: LED fluorescent panels, 32 pcs • Side lighting: LED panel 120 x 30 cm – 12 pcs Output: 48 W, single-piece, 1000 lumen • Riello RG5S burner, 160–310 kW • The cabin is available in various colors

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) Hfsdpfx Aajxna U Uo Dei - Entrance doors: Double-leaf, 1700 × 2300 mm (W × H) - Wall panels: 100 mm thick, 950 mm wide, tongue-and-groove structure; 0.5 mm steel sheet with mineral wool insulation - Box: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, time setting, fault indicator, emergency stop switch, operating hour counter, temperature limit controller, total operating time display - Total power: 6 kW - Overhead conveying system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We offer complete systems including transport carriers, spray booths, and powder coating guns – see visualizations in the photos.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 5.850 mm, panjang total: 12.125 mm, lebar total: 5.150 mm, berat keseluruhan: 8.000 kg, masa garansi: 12 bulan, tinggi dalam: 5.000 mm, panjang dalam: 12.000 mm, lebar dalam: 5.000 mm, Perlengkapan: kabin, pencahayaan, EN: PAINT BOOTH 12x5x5M Model from the EZ Series: - LED ceiling lighting - LED side lighting Hfsdpfxoxm U Exo Aa Dsi - RIELLO oil burners - Four fans, including: ‎ ㅤ- 2x supply air fans ‎ ㅤ- 2x exhaust fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm should be considered – can be positioned on the right or left side. - Structure: Galvanized steel frame construction - Heat exchanger: High-quality stainless steel - Panels: Filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibrations and the air thrust effect from the main supply air duct. Dual-layer roof: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: radial fan 7.5 kW – 2 units - Exhaust system: radial fan 7.5 kW – 2 units Air filtration system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 angled fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burners: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heat-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the roof of the cabin - Insulated roof - Pass-through doors - Water wall - Color according to RAL color chart - EX version (explosion-proof) available

Kondisi: baru, Tahun pembuatan: 2026, - External dimensions: 8125 x 4650 x 4600 mm Hedpfsnbdlbjx Aa Dsfi - Internal dimensions: 8000 x 4500 x 3800 mm - Entrance gate: 4000 x 3800 mm (four-leaf) - Service door: 640 x 1800 mm - Construction: stainless steel - Heat exchanger: stainless steel - Panels: filled with mineral wool - Total power: 22 kW - Seating: inside/outside (after the cabin roof has been installed by the customer on site) - Floor fully sanded - Air supply system: jet turbine 5.5 kW – 2 units - Exhaust system: jet turbine 7.5 kW – 1 unit - Ceiling lights: LED fluorescent lamp panels, 36 pcs. - Side lights: LED panel 120x30cm – 12 pcs. Output: 48 W – single element 1000 lumen - Burner Riello RG5S 160–310 kW - The cabin is available in various colours