Beli Mep Ph 100 bekas (134)

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable Dcsdpfx Aoxaa H Ijavep - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 280 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Control system: NC Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Note: Special promotion price!!! • Fully automatic hydraulic band saw • Miter cuts up to 60° to the left possible • Saw band length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touchscreen operation Djdpjfg E H Djfx Aavscp • Saw arm made of spheroidal graphite cast iron – robust and stable • Required space: 3.4 m² • Footprint: 1900 mm wide x 1800 mm deep

Kondisi: baru, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: Saw band frame, vice assembly, and base made of durable cast iron High-precision degree marking on the cast iron structure Electrical system (with fully labeled wiring and 24 V low-voltage system) Control handle IP 55 for manual cycles (where applicable) Rotating chip brush for the saw band Quick-approach closing unit with vice Dcodpfx Aajfg E H Ievsp Precise end stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering manuals in the user’s language SHARK 281 in manual operation and SHARK 281 CCS in manual operation, but with cutting through automatic downfeed by the saw head’s own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting, (B) adjustment of cutting speed, (C) hydraulic brake with reservoir, (D) end stop for band halt. CCS is optionally available for previously delivered machines as well. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw band and maintenance-friendly coolant tray above the machine base In versions with pneumatic vice (MA), opening and closing of the vice is done via manual valve (pedal control available as an option).

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (flat): 130 x 80 mm Cutting capacity at 45 degrees (round): 100 mm Cutting capacity at 45 degrees (square): 85 mm Cutting capacity at 60 degrees (flat): 90 x 80 mm Clamping range: 130 mm Rotation speed: 30 / 60 rpm Saw blade dimensions: 350 x 32 x 2.5 mm Total power requirement: 1.1 / 2.2 kW Machine weight: approx. 0.22 t Space requirement: approx. 1200 x 860 x 900 mm Special offer 2026 including stand! Manual mitre saw for mitre cuts from 45° left to 45° right. Double ball bearing-mounted steel worm wheel Saw blade shaft mounted on an eccentric made of spheroidal cast iron Bronze gear with key and tapered clutch to ensure maximum power transmission to the steel worm wheel Dcsdpofmck Hjfx Aavep Vice with adjustable guide rails Adjustable anti-burr device (enables burr-free cutting) Length stop Double return springs Main safety switch Emergency stop button Speed selector switch Electric coolant pump for blade lubrication and cooling (micro-spray device can be fitted) Motor: 1.5/1.8 kW - 400 V

Kondisi: baru, Cutting diameter 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Bandsaw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electro-hydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic, dynamic, manual function, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel on a swiveling arm. - Low-voltage operating panel: Polyester membrane keypad with thermoformed raised buttons and operation control signal. - Display shows: * Diagnostics (messages in the user language) * Alerts (description of alarm causes) Dodpjfg E H Usfx Aavjcp * Status of inputs and outputs * Cut counter * Time required for each cut * Bandsaw motor power consumption * Bandsaw tension * Bandsaw speed * Numerical display of the saw head position - Switch handle IP55 for manual 24V cycle. - Comprehensive program of all special cutting cycles. - Identification of other possible special cutting cycles for specific applications - New next-generation hydraulic control unit, highly efficient and low energy consumption. - Rotary table (mounted on 420 mm ball bearings with preloaded thrust bearing). - Dual blade speed (40/80 m/min.) with control - Prepared for the addition of an electronic inverter for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow feed programmable directly from the control panel for adaptation to material. - Vise unit laterally adjustable left and right, with quick-action vise. - Hand-operated blade tension control with electronic converter display on screen. - Machine base designed to completely collect coolant even at maximum mitre angles. - Coolant pan (with electric pump for blade lubrication and cooling) and chip tray (can be replaced by a chip conveyor – see optional accessories) are integrated in the machine base. - Prepared for installation of minimal blade lubrication kit (optional, in addition to the standard emulsion oil lubrication). - Chip-cleaning brush. - The machine is designed for pallet jack transport. - Adjustable length stop for repeated cuts of equal length - Material support arm with roller for attaching a loading platform - Bimetal saw blade for solid and profile material. - Tools and user manual in the respective user language.

Kondisi: baru, Diameter pemotongan: 300 mm Rentang pemotongan pada 90 derajat: bentuk pipih 380 x 250 mm Rentang pemotongan pada 90 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 45 derajat: bentuk pipih 300 x 200 mm Rentang pemotongan pada 45 derajat: bentuk lingkaran 260 mm Rentang pemotongan pada 45 derajat: bentuk persegi 250 x 250 mm Rentang pemotongan pada 60 derajat: bentuk pipih 200 x 170 mm Rentang pemotongan pada 60 derajat: bentuk persegi 170 x 170 mm Rentang pemotongan pada 60 derajat: bentuk lingkaran 180 mm Rentang kecepatan: 40 / 80 m/menit Dimensi pita gergaji: 3770 x 27 x 0,9 mm Daya motor: 1,5 / 1,8 kW Berat: 695 kg Kebutuhan ruang: sekitar 1950 x 1300 x 200 mm Perlengkapan: - Mesin gergaji pita semi-otomatis elektro-hidraulik yang kokoh (INDUSTRI) - Dengan pemotongan miring dari 45° ke kanan hingga 60° ke kiri * Pengaturan miring melalui piring putar besar - Kontrol mikroprosesor MEP EVO untuk mengontrol semua fungsi Dcedpjxaax Dofx Aavsp * Dapat diputar, terletak di depan kanan - Penurunan busur gergaji secara manual atau otomatis, dapat dipilih * Pengaturan bertahap penurunan busur gergaji - Panduan pita gergaji terbuat dari pelat logam keras - Ketegangan pita gergaji hidraulik - termasuk tampilan nilai digital - 2 kecepatan pita gergaji - 1 pita gergaji BI-Metal - Sistem pendingin - 1 penghenti sudut - Sikat pembersih serpihan - Rangka mesin dengan tempat untuk forklift - Instruksi pengoperasian dalam bahasa Jerman Cara kerja pengoperasian semi-otomatis: - Penjepitan vise secara elektro-hidraulik - Penurunan busur gergaji secara elektro-hidraulik - Pengangkatan busur gergaji secara elektro-hidraulik - Pembukaan vise secara elektro-hidraulik

Kondisi: baru, Saw blade diameter 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 110 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Blade speed: 15 – 150 rpm Dcedpfsfg Rldox Aavop Total power requirement: 5.5 kW Machine weight approx. 0.615 t Space requirement approx. 1.4 x 1.4 x 2.0 m Electropneumatic semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on ball recirculation linear double guides - Three-stage gearbox - Infinitely variable speeds, 15–150 rpm - Vice opening 190 mm - Stroke of the saw head programmable directly from the control panel, adjustable to match the cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade, Ø 370x32x3 mm for solid and profile material - Vice with counter-hold device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for identical length cuts - Material support arm, also with connection option for roller conveyor/loading side

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. Dcedjfg E Hzepfx Aavsp + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Dsdpfx Aasfg E Ibsvscp Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirement approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for series cutting from 60° left to 45° right on steel. Dcsdpfx Aasfg Rlcevsp The machine can also operate in semi-automatic cycle. CNC automatic machine with multiprocessor control and two axes controlled by the latest generation MEP control system, enabling the programming of up to 1000 different cutting programs, each with different cutting lengths and quantities, for the same material thickness.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120/110 mm Cutting capacity at 45 degrees (square): 10/95 mm Cutting capacity at 45 degrees (flat): 135 x 60 mm Motor: 2.5 kW Dedpfofg Rlgox Aavscp Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic operation, suitable for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Miter saw for angle cuts from 45° right to 45° left. The vertical orientation allows for sawing operations with the saw head tilted between 0° and 45° to the left. Numerically controlled circular saw machine with the new Windows CE-based control system, specifically developed by MEP for automatic machines.

Kondisi: baru, Model designation Dodpfel Sva Iex Aavjcp SHARK 331-1 NC 5.0 SPIDER

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions 2950 x 25.4 x 0.9 mm Machine weight approx. 0.4 t Djdpfx Aasfg E H Revocp Dimensions LxWxH 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a swivel arm - High-performance, latest-generation hydraulic control unit with low energy consumption - Base frame with pull-out coolant tank The machine fully complies with all CE regulations!

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Djdpfofg E Iajx Aavecp Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Djdpfx Aaofg E H Tjvecp Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 / 30 / 45 / 90 rpm Total power requirement: 1.8 / 2.5 kW Machine weight: approx. 0.38 t Space requirement: approx. 0.8 x 1.0 x 1.85 m Dcedpfx Aajfgpdljvjp Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Kondisi: baru, Cutting diameter 250 mm Cutting capacity at 90 degrees: flat 280 x 220 mm Cutting capacity at 90 degrees: square 220 x 220 mm Cutting capacity at 45 degrees: round 230 mm Cutting capacity at 45 degrees: flat 220 x 200 mm Cutting capacity at 45 degrees: square 200 x 200 mm Cutting capacity at 60 degrees: flat 140 x 100 mm Cutting capacity at 60 degrees: square 100 x 100 mm Cutting capacity at 60 degrees: round 110 mm Vice 285 mm Speed range: 36/72 m/min Saw blade length 2,950 x 27 x 0.9 mm Total power requirement 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large bearing-mounted rotary table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * Automatic cut-off at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guides made of carbide plates - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets Dcodpfx Aaexaarksvjp - Coolant device - Operating instructions in German

Kondisi: baru, Saw blade diameter: 350 mm Cutting range at 90 degrees (round): 115 mm Cutting range at 90 degrees (square): 95 mm Cutting range at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15/30/45/90 rpm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.41 t Space requirement: approx. 0.8 x 1.0 x 1.85 m Dcedpfxsfg Rlbo Aavop Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for miter cuts from 60° left to 45° right. With linear guide for the saw head. - New system with a head that slides vertically on linear guides, with front-mounted ball bearing guide rails. - Double gearbox for high transmission power - 4 speeds: 15/30/45/90 rpm - Vice opening: 190 mm - Saw head stroke programmable directly from the control panel to adapt to the cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 350x32x2.5 for solid and profile material - Vice with counter-clamping system for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for consistent cut lengths - Material support arm, also serves as an interface for roller conveyor/loading side - Turntable with additional central axis

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Dcsdpfx Aasfm T Hbsvsp Standard equipment includes: - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs - The machine is available with either a 34 mm or 41 mm blade at no extra cost Price on request.

Kondisi: baru, circular saw blade diameter 350 x 32 mm Cutting capacity at 90°: round 115 mm Cutting capacity at 45°: round 110 mm Cutting capacity at 60°: round 90 mm Cutting capacity at 90°: square 95 x 95 mm Cutting capacity at 45°: square 95 x 95 mm Cutting capacity at 60°: square 90 x 90 mm Cutting capacity at 90°: flat 180 x 95 mm Cutting capacity at 45°: flat 125 x 95 mm Cutting capacity at 60°: flat 90 x 90 mm Speed: 15 / 30 / 45 / 90 rpm Control: MEP NC Total power requirement: 1.8 / 2.5 kW Weight: 410 kg Dimensions (LxWxH): 2050 x 1050 x 1120 mm Equipment / Description: - NC electro-pneumatic semi-automatic (INDUSTRIAL version) * for mitre cuts from 45° right to 60° left Dodpfx Asxabd Ioavocp - MEP NC control system with soft-touch keypad * equipped with backlit display - The saw head moves on preloaded linear guides . mounted on a robust cast steel column - The powerful 2-speed gearbox is specifically designed for cutting . solid materials - Four blade speeds are available - for optimal adjustment to the material - Large bearing-mounted rotating table with internal table clamping & . precision stops at 0/45/60° allow fast adjustment . for mitre cuts - Pneumatic vice * equipped with bolted vice jaws * serrated jaws ensure optimal clamping of the workpiece - Machine base with lockable door, swarf drawer, and removable . coolant tray with electric coolant pump - Swarf removal brush - Adjustable length stop 600 mm - Detailed operating and maintenance manuals - Circuit diagrams and exploded views - Lifting lugs for transport * Machine is supplied without saw blade

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees: flat 280 x 200 mm Cutting range at 90 degrees: square 230 x 230 mm Cutting range at 45 degrees: round 190 mm Cutting range at 45 degrees: flat 180 x 180 mm Cutting range at 45 degrees: square 180 x 180 mm Cutting range at 60 degrees: round 120 mm Cutting range at 60 degrees: square 110 x 110 mm Cutting range at 60 degrees: flat 110 x 110 mm Vice: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank capacity: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 435 kg Space requirements: approx. 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Miter cuts up to 60° - MEP microprocessor control EVO for monitoring all functions * positioned front right, rotatable - Optional manual or automatic lowering of the saw bow * infinitely variable adjustment of the saw bow descent - Saw blade guide made from carbide inserts - Hydraulic saw blade tensioning with digital value display - 2x blade speeds - 1x bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Dsdsw U U Uwepfx Aavocp Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: flat 130 x 80 mm Cutting capacity at 45 degrees: round 100 mm (left) Cutting capacity at 45 degrees: round 75 mm (right) Blade speed 30 / 60 rpm Saw blade dimensions 350 x 32 mm Machine weight approx. 220 kg Features: - Robust cast iron construction - Gearbox with bronze gear and ground/hardened steel worm in special oil bath - Vice with counter-clamping device for double workpiece clamping - Electric coolant pump for saw blade cooling and lubrication Scope of delivery: Dcodpfxsxabnmj Aavop - Adjustable length stop 600 mm - Tool kit - Detailed operating manual, maintenance handbook - Wiring diagrams and exploded views - Lifting eyes for transport * Machine is supplied without saw blade Included special accessories: - Base cabinet with door (steel stand)

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120 mm left Cutting capacity at 45 degrees: round 110 mm right Cutting capacity at 45 degrees: square 100 mm left Cutting capacity at 45 degrees: square 95 mm right Cutting capacity at 45 degrees: flat 135 x 60 mm Saw blade dimensions 350 x 32 Speed 1700 / 3400 rpm Cutting capacity at 45 degrees: round 120 mm Total power requirement 1.5 / 2.2 kW Machine weight approx. 210 kg Space requirement approx. 1170 x 860 x 1600 mm Description: Manual high-performance circular saw for cutting from 45° right to 45° left in aluminium and light metal alloys, with 2 speeds Equipment: - With pneumatic clamps - Saw head can be tilted 45° to one side - Heavy cast iron construction - Ensures vibration-free operation and maximum precision - Head can be additionally tilted up to 45° - Powerful two-speed drive with double V-belts - Large bearing-mounted turntable - Lubrication system with mechanical diaphragm pump - Suction connection for chip extraction Scope of delivery: - Adjustable length stop 600 mm - Tool kit - Operating instructions with wiring diagram - Lifting eyes for transportation * Machine is supplied without saw blade Optional accessories: - Including base frame Dedpfxexaai No Aavecp

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting range at 90°: round 115 mm Cutting range at 90°: square 95 x 95 mm Cutting range at 90°: flat 180 x 95 mm Cutting range at 45°: round 110 mm Cutting range at 45°: square 95 x 95 mm Cutting range at 45°: flat 125 x 95 mm Cutting range at 60°: round 90.0 mm Cutting range at 60°: square 90 x 90 mm Cutting range at 60°: flat 90 x 90 mm Speed 15 / 30 / 45 / 90 rpm Total power requirement 1.8 / 2.5 kW Machine weight approx. 375 kg Dimensions (LxWxH) 1000 x 1100 x 1870 mm Features / Description: - Manual high-performance vertical circular saw - Suitable for cuts from 45° right to 60° left - Saw head guided on pre-tensioned linear rails along a robust cast steel column - Sturdy 2-speed gearbox, specially designed for solid material cutting Dedpfx Aoxaab Ssavecp - Four available blade speeds for optimal adjustment to the workpiece material - Large, mounted rotary table with internal table clamping and precision stops at 0/45/60° for quick miter adjustment - Quick-release vice with bolt-on, serrated jaws for secure clamping of the workpiece - Base frame with lockable door, chip drawer, and removable coolant tray with electric coolant pump - Chip removal brush - Adjustable length stop 600 mm - Comprehensive operating instructions, maintenance manual - Circuit diagrams and exploded view drawings - Lifting eyes for transportation * Machine is supplied without saw blade

Kondisi: baru, Cutting diameter: 300 mm Cutting range at 90 degrees, flat: 330 x 260 mm Cutting range at 90 degrees, square: 260 x 260 mm Dsdpfx Aajxaaqtevecp Cutting range at 45 degrees, flat: 270 x 200 mm Cutting range at 45 degrees, round: 250 mm Cutting range at 45 degrees, square: 250 x 250 mm Cutting range at 60 degrees, flat: 170 x 170 mm Cutting range at 60 degrees, square: 170 x 170 mm Cutting range at 60 degrees, round: 180 mm Speed range: 40 / 80 m/min Saw blade length: 3650 x 27 x 0.9 mm Machine weight approx. 640 kg Features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotary table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * With steplessly adjustable feed * Automatic stop at end of cut - Manual cutting mode selectable - 2 saw band speeds - Saw blade guide with carbide plates - 1 saw band - 1 angle stop - Rotating chip removal brush - Control panel – front right - Hydraulic pressure cylinder for blade tensioning * With analog pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German