Beli Mep Tiger 300 bekas (116)

Tahun pembuatan: 2003, Kondisi: bekas, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Dcedpfora Rrlox Abhsc Cutting capacity – Square: 260 mm Control: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight approx. 1050 kg

Kondisi: baru, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Item number: SH230-1NCHS Motor power: 2.2 kW Vice opening: 235 mm Blade dimensions: 2950x27x0.9 mm Weight: 1,000 kg Dedpechhfusfx Abhecc Speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic band saw with semi-automatic and fully automatic modes. Max. remnant piece length: 70 mm. Bundle cutting up to 230 x 230 mm. CNC band saw equipped with the new MEP 50 Windows-based control system. Material feed via stepper motor over ball screw spindle, mounted on opposing ball bearings. Single stroke of 500 mm, repeatable for any cutting length. Easy programming: just enter cut length and quantity, then press "START". Electronic blade tension control. Automatic cutting force monitoring via a servo valve located directly on the cylinder. Band rotation control with instant stop in case of band blockage.

Kondisi: baru, MEP COBRA 352 SX evo [Semi-Automatic] Article Number: CB352SX Motor Power: 1.5 / 2.2 kW Vise Opening: 180 mm Blade Dimensions: 350 x 32 x 3.4 mm Weight: 285 kg Speed: 1700 / 3400 rpm Cutting Capacity at 0°: 120 / 105 / 180x70 mm Cutting Capacity at 45° right: 120 / 100 / 135x60 mm Cutting Capacity at 45° left: Cutting Capacity at 60° right: Cutting Capacity at 60° left: Description Semi-automatic circular saw for cutting solid and hollow aluminium materials and light alloy metals, equipped with an electrowelded carbide-tipped saw blade. Standard Equipment: - Machine designed for mitre cuts from 45° right to 45° left. - Head tilting allows for cut processing anywhere between 0° and 45° to the left. - MEP presents its latest generation control unit for semi-automatic machines, featuring single-axis microprocessor control. - OPERATING CYCLE: At the beginning of each cycle – Vice closes, motor starts, saw head lowers for cutting, motor stops, saw head lifts, vice opens. - NEW – 16-character, 2-line display provides technical parameters such as: number of cuts performed, cutting time, ammeter, and over 100 diagnostic messages and warnings. - NEW – Event display and logging of alarm and error messages, with the option to review incidents. Electrical Equipment: - NEW – Low-voltage control panel: Polyester membrane keypad with thermoformed, raised buttons and operation control signal. - Saw bow stroke can be programmed directly from the control panel for adaptation to material size. - Ball-bearing rotary table ensures smooth and precise positioning. - Clamping system with two end-positioned vices, freely adjustable along the longitudinal axis of the part. - Adjustable mechanical stops for quick head positioning at angles of 0° and 45° right and left. Dcodpfx Aschkv Ijbhsc - Chip remover prepared for optional extraction system. - Automatic saw blade lubrication system, activated only at cutting start. - Machine supplied without saw blade. - Ready for installation of minimum-quantity lubrication kit for saw blade (optional), as well as standard coolant-based lubrication. - Includes tool kit, user manual, and spare parts list. For further technical data, please refer to the attached PDF document (Catalogue, p. 2).

Kondisi: baru, MEP SHARK 332-1 CCS metal band saw with semi-automatic descent. MEP Authorized Dealer – Please send us your inquiry! Dcedpfxecgbt Rj Abhjc Motor power 1.5/1.8 kW Vice opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Blade speed 40/80 m/min Cutting capacity at 0° 300 / 260x260 / 330x260 mm Cutting capacity at 45° right 260 / 250x250 / 270x200 mm Cutting capacity at 45° left 200 / 180x180 / 200x160 mm Cutting capacity at 60° right 180 / 170x170 / 170x170 mm Cutting capacity at 60° left Description of the MEP Saw: Operation in CCS version: After material is positioned and the vices are closed, the cutting cycle can be started. The saw frame descends by its own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the necessary position for the next loading cycle. Electrical control panel (marked cable connections, readiness indicator, main safety switch lockable with padlock, switch or speed selector, emergency stop, thermal-magnetic protection, 24 volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick lock. Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (optional accessory). Electric coolant pump for band lubrication and cooling. Chip removal brush. Adjustable precision stops for repetitive length cutting. Machine is suitable for pallet truck transport. Bi-metal saw blade for solid and profile material. Tool set and operating instructions included. Motor 1.5/1.8 kW 2 speeds: 40/80 m/min. Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting data – see image. For further technical data, please refer to the attached PDF document.

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left Dcedpfx Ascgbp Isbhjc - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, c7c13e8b-8bae-47fd-b2b1-40259adfc0c1 Dcedpfscgrkysx Abhjc

Kondisi: baru, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Dsdpfx Aocgbq Ijbhscc Weight: 485 kg Blade speed: 36/72 m/min. Cutting capacity 0°: 250 / 220x220 / 280x220 Cutting capacity 45° right: 230 / 200x200 / 220x200 Cutting capacity 45° left: 200 / 170x170 / 200x140 Cutting capacity 60° right: 120 / 80x80 / 140x80 Cutting capacity 60° left: Description: Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO featuring semi-automatic dynamic and manual operation, equipped with an MEP-28 control for mitre cuts from 45° right up to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – saw head descends for cutting – motor stops – saw head returns – vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand switch). Features: - New centralised control panel on an articulated arm for easy access from any working position. - Low voltage control unit: Polycarbonate membrane keyboard with thermoformed raised keys and actuation confirmation signal. - Display for: * Diagnostics (messages in the user’s language) * Alarms (alarm cause descriptions) * Status of inputs and outputs * Cut counter * Cut duration * Saw blade motor amperage * Blade tension * Blade speed * Numeric display of head position. - IP55 manual 24V cycle lever. - Full program of special cutting cycles. - Ability to determine additional special cutting cycles for specific applications. - Latest generation hydraulic control unit, highly powerful and energy efficient. - Large working area with turntable on roller bearing; 265 mm with pre-loaded thrust bearing, mounted. - Two blade speeds (36/72 m/min.) via control system. - Prepared for electronic inverter installation for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow stroke is programmable directly from the control panel, adaptable to cutting material. - Clamping device movable left and right, with quick-release vice. - Manual blade tension control, indicated on-screen via electronic transducer. - Machine base with pull-out coolant tray. - Electric coolant pump for blade cooling and lubrication. - Prepared for installation of minimum quantity lubrication system for the saw blade (optional), in addition to conventional emulsion oil lubrication supplied as standard. - Chip removal brush. - Machine designed for pallet truck transport. - Length stop for repeated cuts of equal length. - Material support arm with roller for attaching loading table. - Bi-metal saw blade for solid and profile materials. - Tools and operating manual in the respective user’s language. For further technical data, please refer to the attached PDF document.

Kondisi: baru, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vise opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, infinitely variable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: Description Fully automatic hydraulic bandsaw Dcedpfx Abschhdijhoc Mitre cuts up to 60° to the left possible Saw band length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10 m) Easy-to-use touchscreen control Saw arm made from spheroidal graphite cast iron – robust and stable Required floor space: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep Please refer to the attached PDF document for further technical data.

Kondisi: baru, MEP COBRA 352 MA Article Number: CB352MA Motor Power: 2.2 kW Vice Opening: 180 mm Blade Dimensions: 350x32x3.4 Weight: 210 kg Speed: 1700/3400 rpm Cutting Area 0°: 120 / 105 / 180x70 Cutting Area 45° right: 120 / 100 / 135x60 Cutting Area 45° left: Cutting Area 60° right: Cutting Area 60° left: Description: Manual circular saw for cutting aluminium, capable of mitre cuts from 45° right to 45° left, with a saw head that swivels from 0° to 45° to the left. On the Cobra 352 MA (automatic vice), the vices close automatically when the saw head is lowered. Standard Equipment: - Roller-bearing turntable for quick and precise mitre adjustment - Screw locking to fix the saw head in any angular position - Automatic saw blade lubrication system - Clamping system with two vices - Saw head locking in the upper position - Adjustable length stop for repetitive cuts of equal length Dcjdschku Sopfx Abhec - Vice opening 180 mm - Includes tools and operating manual Electrical Equipment: - Control panel - Marked cable connections - Power-on indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Handle switch with IP 55 protection rating - Low voltage system 24 volts - Motor 1.5/2.2 kW – 400 volts Please refer to the attached PDF document for further technical details.

Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number CB352NC 5.0 Motor Power 2.6/3.5 kW Vise Opening 180 mm Band Dimensions 350x32x3.4 mm Weight 600 kg Speed 1700/3400 rpm Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description Djdpechkwhjfx Abhjcc Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left. Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material. -New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times. -Fieldbus communication system with dual microprocessor and serial port. -Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings. -New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings. -New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED. -Stroke of saw bow programmable directly from the control panel to adapt to cutting material. -Ball bearing mounted turntable for easy and precise rotation. -Clamping system with two front-end vises, positionable along the length of the part. -Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).

Kondisi: baru, MEP SHARK 350 NC HS 5.0 Fully Automatic Double Column Metal Band Saw Article Number MEP SHARK 350 NC HS 5.0 Motor Power 4.0 kW Table Opening 355 mm Blade Dimensions 4640x34x1.1 mm Weight 2800 kg Blade Speed 15 - 115 m/min, infinitely variable Cutting Capacity 0° 350 / 350x350 mm Cutting Capacity 45° right Cutting Capacity 45° left Cutting Capacity 60° right Dedpfx Asi Hmcdebhscc Cutting Capacity 60° left Description: Fully automatic hydraulic band saw in double column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw that can also be operated semi-automatically, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows-2 "CE". Standard features include: Powered chip conveyor, installable to the right or left side of the machine. Adjustable clamping pressure for the vices. Material feeder with vertical rollers for lateral support. Clamping pressure regulation. Up to 100 programs storable. The machine is available with either a 34 mm or 41 mm blade at no additional cost.

Kondisi: baik (bekas), Rentang pemotongan baja bulat pada 45°: 250 mm, Rentang pemotongan baja bulat pada 90°: 280 mm, ketinggian potong (maks.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Sawing speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Mitre cutting range: 0 - 60º Equipped with: - Coolant system Dcjdpfx Abott Nd Rshsc Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0306283/0, - Bandsaw logam yang sangat baik. Performa pemotongan tinggi. - 5 pita gergaji baru Dcsdpfx Absxnartohjc - Roller conveyor sekitar 5 m (juga berfungsi penuh)

Kondisi: bekas, Tahun pembuatan: 2006, de Dedpfx Aeww Ay Ijbhocc

Kondisi: baru, Cutting diameter 300 mm Saw band length 3320 x 27 x 0.9 mm Cutting width 300 mm Control NC Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: square 250 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: square 170 mm Band speed 15 - 100 m/min Total power requirement 2.2 kW Machine weight approx. 1.1 t Space requirements approx. 3.3 x 2.83 x 2.23 m Equipment: - Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming - Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines - User interface with 7" touch screen display and mechanical buttons for machine operating functions - Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter - Material feed with stepper motor and ball screw - mounted on counter-opposed ball bearings; single stroke 600 mm Dedpfx Abefg E H Eohocc - Repeatable for any length required - Automatic monitoring of cutting load - via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Swarf removal brush - Bi-metal saw blade for solid and profile materials - Tools and operating manual including spare parts list

Kondisi: baru, Cutting diameter: 250 mm Band saw blade length: 2950x27x0.9 mm Table height: mm Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Required space: approx. m Absolute special price!! EUR 7,170 (Current price from 2024 is EUR 9,425) Standard equipment: - Vice with quick adjustment and adjustable guide strips Dcodpfxsfg E H Ns Abhjc - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Chip removal brush - Pre-set precision stops for cuts at: 0°, 45°, and 60° left, and 45° right - Swivel table for double miter cuts - Electric coolant system 48 V (Option to fit a micro-spray device)

Kondisi: baru, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic dual-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile material, with a maximum remnant piece length of 60 mm. - Maximum cross-section: 230 x 230 mm. - Numerically controlled bandsaw machines featuring the new Windows "CE" based IGE developed specifically by MEP for automatic operation FEATURES: - User interface with 7" touchscreen display and mechanical buttons for machine operating functions, ensuring reliable operation, ease of use, and intuitive real-time monitoring of all cutting parameters. - Safety enclosure designed in accordance with the latest Machinery Directive EN 13898/2007 safety standards. Dedpfxefg E Hyj Abhscc - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron structure (G25) for vibration compensation, enhanced machine stability, and reduced saw blade wear.

Kondisi: baru, Cutting diameter: 280 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 330 mm Dedjfg E H Dopfx Abhecc Control system: NC Cutting range at 90° (flat): 330 x 260 mm Cutting range at 90° (square): 260 x 260 mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.24 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Note: Special promotion price!!! • Fully automatic hydraulic band saw • Miter cuts up to 60° to the left possible • Saw band length: 3650 x 27 x 0.9 mm • Single stroke: 600 mm (programmable up to 10 m) • Simple touchscreen operation • Saw arm made of spheroidal graphite cast iron – robust and stable • Required space: 3.4 m² • Footprint: 1900 mm wide x 1800 mm deep

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and Djdjfg E H Ispfx Abhjcc 24 V low voltage circuit) Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Standard equipment includes: Dsdpefm T Hbsfx Abhecc - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs - The machine is available with either a 34 mm or 41 mm blade at no extra cost Price on request.

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total power requirement: 4.0 kW Machine weight approx.: 2.8 t Dimensions L x W x H: 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw with dual-column design for 0° cuts on solid materials and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Driven chip conveyor, installable on either the right or left side of the machine. Dsdpfofg E Hzox Abhjcc + Adjustable clamping pressure for the vises. + Feed system with vertical rollers for lateral material support. + Numerically controlled band saw, which can also be operated semi-automatically, featuring the new MEP 50 control unit, developed specifically by MEP for automatic machines, based on Windows CE. + “Clean cut” cycle: the feeder retracts the workpiece to avoid scoring the cut surface when the band lifts at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7” touchscreen display and mechanical buttons, allowing for operational control of the saw, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, For sale is a used, fully functional semi-automatic mitre band saw machine. Cutting capacities: 0° 330 mm 320 mm 450 x 320 mm +45° 320 mm 300 mm 300 x 300 mm Dodpowigavjfx Abhjcc +60° 210 mm 200 mm 200 x 200 mm -45° 320 mm 300 mm 300 x 300 mm -60° 210 mm 200 mm 200 x 200 mm Max. vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Main drive power: 4.0 kW – three-phase Blade speed: 15 – 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Kondisi: baru, Cutting diameter 280 mm Cutting range at 90 degrees: flat 380 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Dsdofg E Iaepfx Abhjcc Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic functions, for cuts from 45° right to 60° left. Key features: - Swivelling control panel on vertical post - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts - Dual band speed (40/80 m/min.)

Kondisi: baru, Cutting diameter: 330 mm Cutting range at 90 degrees, flat: 510 x 320 mm Cutting range at 90 degrees, square: 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw machine for cuts from 60° left to 60° right. Dodpfsfg E Ibex Abhecc Versatile machine with a blade size of 4640 x 34 x 1.1 mm, suitable for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console is mounted on a pivoting arm, allowing comfortable and safe operation from any position. Electronic inverter for stepless regulation of the blade speed from 15 to 100 m/min. Large rotating table with a diameter of 280 mm, finely engraved with a precise scale, easily adjustable and mounted.

Kondisi: bekas, Saw blade diameter: 350 mm Dcodpfxjfc T Ugs Abhoc Cutting range at 90 degrees (round): 120 mm Cutting range at 90 degrees (square): 105 mm Cutting range at 90 degrees (flat): 180 x 70 mm Cutting range at 45 degrees (round): 120 mm Cutting range at 45 degrees (square): 100 mm Cutting range at 45 degrees (rectangular): 135 x 60 mm Saw blade speeds: 1,700 / 3,400 rpm Total power requirement: 1.5 / 2.2 kW Machine weight approx.: 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine is suitable for miter cuts from 45° right to 45° left. Thanks to the alignment of the vertical axis, it is possible to carry out sawing operations with the head tilted from 0° up to 45° to the left.