Beli Posmill C 1050 bekas (55.482)

Kondisi: bekas, jam operasional: 8 h, Powerful Scrubbing Machine This scrubbing machine has only been used a few times for demonstration purposes! The Meijer SR1050C ride-on scrubber is a quiet powerhouse with a brush pressure of up to 150 kg. It features a cylindrical scrubbing deck and large clean and waste water tanks, making it ideal for cleaning sizeable areas. Gbjdpfx Ajwzvb Toh Rsi The machine operates at a very low noise level and can achieve working widths of up to 100 cm. The spacious operator’s seat ensures maximum comfort. Additionally, the machine is equipped with a manual water sprayer for cleaning the waste water tank and offers an operating time of approximately 4 hours. Other specifications: - Theoretical area coverage: 8,000 m²/h - Battery operating time: 4 hours - Scrubbing width: 100 cm - Squeegee width: 130.5 cm - Number of brushes: 2 - Power source: 36V battery - Brush diameter (HxW): 21 x 100 cm - Brush type: Cylindrical - Brush pressure: 60 kg - Clean water tank capacity: 230 L - Waste water tank capacity: 240 L - Debris hopper capacity: 10 L - Traction: Front-wheel drive - Maximum speed: 8 km/h - Noise level: < 70 dB(A) - Weight (excluding batteries): 550 kg - Weight (including batteries): 970 kg - Dimensions (LxWxH): 191.7 x 109.5 x 173 cm Would you like to know more about the various features of the Meijer SR1050C, or see it in action at your location during a demonstration? Please contact us—our consultants are happy to provide further information!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Depositor untuk produk panas, akan terhubung ke wadah memasak dan memompa produk ke dalam kantong dengan berat yang dapat diatur. Clipper bertenaga udara untuk menyegel kantong. Kantong yang telah disegel dapat dimasukkan ke dalam tumble chiller untuk pendinginan. Mesin dalam kondisi kerja baik dan siap untuk dikirim. Listrik 1 phase 240 volt 50 Hz. Gedpfexgutpex Ah Robi Memerlukan suplai udara.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.660 mm, jarak lintasan sumbu Y: 760 mm, jarak gerak sumbu Z: 660 mm, beban meja: 1.200 kg, kecepatan rotasi (maks.): 8.000 rpm, DETAIL TEKNIS Sumbu X: 1.660 mm Sumbu Y: 760 mm Sumbu Z: 660 mm Ukuran meja: 760 x 2.000 mm Daya beban meja maks.: 1.200 kg Tipe holder alat: SK 40 Penukar alat: 2 x 24 Diameter alat maks.: 80 mm Diameter alat maks. dengan slot tetangga kosong: 110 mm Panjang alat maks.: 350 mm Gbedpjymw Nhefx Ah Rsi Kecepatan rapid (X/Y/Z): 24 / 24 / 30 m/menit DETAIL MESIN Kontrol: MAZATROL M-PLUS Dimensi & Berat Ruang yang dibutuhkan: ca. 6,0 x 4,0 x 3,5 m Berat mesin: ca. 8,1 t Kebutuhan daya total: 32,8 kVA Mesin telah dirawat secara berkala.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M11360*17766, Tahun pembuatan: 2018, kapasitas angkut: 12.000 kg, tinggi angkat: 6.500 mm, The technical specifications are based on the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Load capacity: 12,000 kg with a load center of 1,200 mm Mast: Duplex standard Lifting height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Mast tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CanBus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stacker Grab TYP HG1T-6000S TECHNICAL DETAILS Gripping width: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Grip height: 1.3 m Load capacity: 6,000 kg Double gripping bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum type FEATURES Manufactured with a robust and precise welded construction Articulated gripping arms are rotatably mounted Equipped with hydraulic cylinders, necessary valves, hoses, and fittings Including oil pressure gauge and connecting hoses for the rotator Additionally: one pressure gauge offset by 180° from the standard gauge Telescopic Boom & Extension TECHNICAL DETAILS Extension reach: 1.6–2.1 m Load capacity: 8,000 kg at outreach 1.6–2.1 m FEATURES 1 fork boom, double-strut design, with infinite rotator and pendulum suspension Including connection hoses to forklift 1 hydraulic extension with extension cylinder 1 stabilizer (2 pcs.) for pendulum movement compensation Integrated side shift in glide rails, travel: 250 mm Radio Pressure Monitoring (Clamp Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30 °C to +85 °C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second pulse interval EMC System / Cabin & Controls EMC system: Electronic control with 7" touchscreen Driver’s seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior rear-view mirrors on the fender (high) Turbo II heavy-duty air filter Additional hydraulic function Quick-release couplings on the fork carriage Gbodpfx Aheym Uu Us Rsi Hydraulic accumulator/shock absorber 60 bar / 2 L in lifting function Hydraulic oil tank preheating Additional LED headlights, 2 × on mast Reverse alarm LED beacon Electric cables routed above mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with rpm increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/Analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wipers ACC air conditioning SMV universal mounting rail Movable writing pad A4 LED reading lamp Diesel parking heater + engine coolant heater Sun visor (roof/front) Panoramic rear-view mirror Installation of attachments from other manufacturers Central lubrication system basic, 14 points

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 300 mm, model controller: PHILIPS, lebar rahang: 125 mm, Perlengkapan: dokumentasi / manual, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara 08.04.26 dan 16.04.26! DETAIL TEKNIS Pergerakan sumbu X: 400 mm Pergerakan sumbu Y: 400 mm Pergerakan sumbu Z: 300 mm Ukuran meja: 550 x 280 mm Lebar rahang: 125 mm Holder alat: SK 40 DETAIL MESIN Kontrol: PHILIPS Tegangan kerja: 380 V Frekuensi: 50 Hz Tegangan kontrol: 220 V Arus nominal: 50 A Gedpjyk Thuefx Ah Robi Dimensi & Berat P x L x T: 3000 x 2000 x 1800 mm Berat mesin: 1500 kg PERLENGKAPAN Meja dengan 4 alur Ragum tambahan Dokumentasi

Kondisi: belum diuji (bekas), Tahun pembuatan: 2011, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 6.200 mm, jarak lintasan sumbu Y: 1.935 mm, tinggi benda kerja (maks.): 250 mm, jumlah sumbu: 4, jumlah spindel: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X direction: 4 Number of horizontal drilling spindles in Y direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of vacuum beam traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of places in tool magazine: 22 Gjdpfeyqzrnjx Ah Rebi MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8011

Kondisi: baru, Tahun pembuatan: 2025, de Gbjdpfx Ahsrt Tpns Rji

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), - BEKAS - MESIN CNC MILLING KOLOM BERGERAK DENGAN MEJA PUTAR DAN GESER GERAK MEMANJANG: 4000 mm GERAK MELINTANG: 1250 mm GERAK VERTIKAL: 2000 mm PERGERAKAN CEPAT L-T-V: 20 m/menit GERAK MELINTANG MEJA: 2000 mm PALET: 2000 x 2500 mm; 1200 rpm MAKSIMAL BEBAN DIIJINKAN: 28000 kg Gbjdowlwhcjpfx Ah Rsi KEPALA: SUMBU A/B OTOMATIS; ISO50 DIN; 15-4000 rpm; 30 kW; 650 Nm MAGAZINE TOOL: TIPE RANTAI; 41 POSISI UNIT KONTROL: FIDIA C20 XPOWER KOOLAN TEKANAN TINGGI: 12 Bar AKSESORIS: KONVEYOR SERPIHAN; HANDWHEEL PORTABEL; SETTER TOOL LASER

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 5.500 h, Fungsionalitas: berfungsi sepenuhnya, de2hu-001 Gsdpfxjyr I A As Ah Rebi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, KELCH Kalimat C34-1/C, tahun pembuatan 2008 Godpfx Ajyt Naroh Rjbi Holder alat: SK 50 Rentang pengukuran sumbu-X: 330 mm Rentang pengukuran sumbu-Z: 400 mm

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Gbjdpfswunwyox Ah Roi Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: bekas, Tahun pembuatan: 2006, en-GB Gjdpfxexp Rywe Ah Rsbi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Diameter poros: 40 mm Kapasitas pembengkokan: Besi plat berdiri pada Ø 500 mm: 60 x 10 mm Besi plat datar pada Ø 400 mm: 100 x 15 mm Besi kotak pada Ø 500 mm: 35 mm Besi siku, kaki keluar pada Ø 450 mm: 50 x 50 x 6 mm Besi siku, kaki ke dalam pada Ø 600 mm: 50 x 50 x 6 mm Besi T, T keluar/dalam pada Ø 600 mm: 60 x 60 x 7 / 50 x 50 x 6 mm Besi bulat pada Ø 500 mm: 35 mm Kecepatan putar poros: 7,5 rpm Koneksi listrik: 380 V, sekitar 1,7 kW Kebutuhan ruang: 910 x 640 x 1400 mm Gbjdpfx Ahjx Anpvj Roi Berat: sekitar 480 kg

Kondisi: sangat baik (bekas), Center height 125 mm Gbedpolyrcijfx Ah Rji Center distance 500 mm Spindle speeds 40-3000 rpm Various accessories MARCELS MACHINES CH

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 4.890 h, kecepatan spindel (maks.): 18.000 rpm, berat keseluruhan: 10.500 kg, produsen pengendali: HEIDENHAIN, model controller: 530, jumlah sumbu: 5, en Godpfx Aheyt Hrlo Rjbi

Kondisi: sangat baik (bekas), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber used for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climate test chamber enables you to evaluate the functionality or material properties of a test object under the influence of temperature and humidity. Optimal air distribution with a correspondingly high recirculation volume ensures efficient transfer onto the test items. The air conditioning compartment is located at the rear of the inner chamber. The system components are situated behind the unit in a separate frame, providing easy access. Controls are housed in a separate electrical cabinet. The operating panel is integrated into the cabinet door. For humidity removal from the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be supplied to the chamber via a blower system. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temporal temperature deviation: ±0.5 to 1 K - Rate of temperature change (linear, with test specimen and radiant heat, measured in supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity * Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±1 - ±3% r.h. All technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without heat irradiation, and without additional equipment. Dimensions: Internal Chamber/Test Area: - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm; Width: 1,600 mm; Depth: 1,550 mm External Dimensions: - Height: 2,800 mm; Width: 2,250 mm; Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power consumption: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: Refrigeration Unit: - Water-cooled, low noise, semi-hermetic - Infinitely variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R 23 / R 404 A Gedpfx Ajx Eabpoh Rebi Notes: - Inspection possible by arrangement (46325 Borken) - Shipping via freight forwarder available – costs & arrangements upon request - Scope of delivery: (see photo) (Specifications and technical details subject to change and errors reserved.) We are happy to answer any further questions via telephone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for performing temperature and humidity tests on multiple test specimens simultaneously. Gedpfjx Eaxbsx Ah Rjbi Device Description The climatic test chamber allows you to test the function or material properties of a specimen under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective transmission to the specimen. The air handling unit is located at the rear of the interior. The system’s operating units are installed in a separate frame behind the device for easy accessibility. The control unit is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can be purged with fresh air via a blower. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and heat load, measured at supply air): * Heating: 2 K/min from -40 °C to +85 °C * Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10 % to 95 % relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3 % r.h. over time Technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without heat load, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 5,500 litres (5.5 m³) - Internal approx.: Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External approx.: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Design: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: Inspection by appointment possible (46325 Borken) Shipping by freight forwarding possible – costs & arrangements on request Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting simultaneous temperature and humidity tests on multiple test specimens. Device Description: This climatic test cell enables the assessment of functionality and material properties of test items under controlled temperature and humidity conditions. Efficient air circulation with a high recirculation volume ensures optimal transfer to the test goods. The air handling section is located at the rear of the interior chamber. The system aggregates are positioned behind the chamber in a separate frame for easy access. The control system is housed in a dedicated control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test area can also be purged with fresh air using a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test load and radiant heat, measured in supply air) - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time Technical data refer to ambient temperature of +25 °C, rated voltage 400 V, without test samples, radiant heat, or additional equipment. Dimensions: - Internal (test chamber/usable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm - External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Features: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable performance control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available—costs & arrangements upon request - Scope of delivery: see image - (Specifications and information subject to change or error!) Gjdpfx Ahex D Abpe Robi For further questions, we will be happy to assist you by phone.

Kondisi: sangat baik (bekas), en_TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air handling room - Humidification unit - Machine room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature consistency, supply air (temporal): ≤ ±0.5°C (without thermal test chamber load, according to DIN 50011 T13 / EN 60068) - Temperature consistency, supply air (spatial): ≤ ±1.0°C (without thermal test chamber load, according to DIN 50011 / EN 60068) - Heating rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) - Cooling rate (to DIN 50011): approx. 2.0 K/min (without thermal test chamber load, to DIN 50011 / EN 60068, or test specimen in the range -30°C...+85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% r.h. (without thermal test chamber load) - Dew point temperature range: +5...+89°C (without thermal test chamber load) - Humidity consistency (in supply air, temporal): ≤ ±2.5% r.h. (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% r.h. (without thermal test chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening of test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: Airflow: - Supply air: perforated plate on rear wall, ceiling area - Exhaust air: perforated plate on rear wall, floor area Temperature Control: - Direct cooling by evaporating refrigerant in a finned heat exchanger - Heating with electric resistance heaters Dehumidification: - Direct dehumidification by evaporating refrigerant in a heat exchanger Gbjdpfovx S Hhox Ah Rsi Interior cladding: stainless steel External cladding: galvanized, plastic-coated steel sheet Floor design: stainless steel, floor load 15,000 N/m², wheel load (contact area ≥4 cm²) 1,500 N/wheel Door: double-leaf door, stainless steel, painted exterior with observation window (W x H) 1000 x 1000 mm Test chamber lighting: 4 spotlights at 500 W each Insulation: double-layer, 80 mm PUR foam, 120 mm mineral wool Refrigeration unit (1 piece): Bitzer 6G-30.2Y Refrigerant: R449A Refrigeration oil: SEZ 32 Steam humidifier (1 piece): EDB 40 Colors: - Chamber RAL 9010, white - Door RAL 9010, white - Machine unit RAL 7032, pebble grey - Control cabinet RAL 7032, pebble grey Weights: - Total system approx. 4,900 kg - Machine module KB 127 approx. 750 kg - Control cabinet approx. 120 kg - Humidification unit approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50 Hz - Rated power: 95 kW - Rated current: 150 A

Kondisi: sangat baik (bekas), Weiss Model: WK 27'/50-150 Climate Test Chamber Water-cooled Technical Specifications: Test chamber designation: WK 27'/50-150 External dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control cabinet dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal dimensions: Gbjdpfjvx Nfbox Ah Rsi Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor load capacity: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 liters Specimen mass: 1000 kg Cooling / Heating operation: -50°C to 150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (temporal) Temperature constancy: ± 0.1 to 0.5 K (temporal) Climate operation: 10 to 90°C Humidity: 10...98 % RH Temperature constancy: ± 0.1 to 0.5 K (temporal) Dew point range: +4 to +84 °C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A Includes extra floor plates to increase floor load capacity For your security as a buyer, please note the following information: The following steps are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful checks, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Gbsdpfeklv H Ijx Ah Rji Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: bekas, mytron Model: T2240 Temperature Chamber, Water-cooled Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Feedthrough ports for cables: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Godpfxjvtl Hqj Ah Robi temporal temperature stability: +/- 0.5 °K spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, inlet and outlet 1" female thread Cooling water shutoff by solenoid valve when unit is OFF Fault indication for chiller malfunction Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (approx. 27 °C in continuous cooling) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fuses: 3 x 20.0 AT, 3 x 10.0 AT Lighting: 25 Watts each on left and right sides of chamber Exhaust connection: DN 100 mm push-fit system Safety devices: electronic overtemperature protection (fixed setting) Smoke detection with audible alarm Viewing window: five-pane glazing, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) Further questions can be answered for you by phone.

Kondisi: sangat baik (bekas), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Working chamber volume: approx. 980 liters Gbjdpfsixtitox Ah Rsi Temperature range: -70ºC to 180ºC Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating rate in ºC/min (-65º to 71ºC): 6.8ºC Heating rate in ºC/min (-65º to 180ºC): 5.6ºC Heating rate in ºC/min (-40ºC to 85ºC): 6.5ºC Cooling rate in ºC/min (85ºC to -40ºC): 4.7ºC Cooling rate in ºC/min (71ºC to -65ºC): 3.7ºC Cooling rate in ºC/min (180ºC to -65ºC): 4.3ºC External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE 35 A Refrigerants: R508B and R404A Approx. weight: 900 kg Model: Thermotron SE-1000-6-6 For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerants 3. Leak test with certification 4. Upon successful inspection, each chamber undergoes a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Gbodpovb Hanjfx Ah Rsi Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.

Kondisi: sangat baik (bekas), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Infinitely variable output control via electronic monitoring and control system Environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text RS 232 interface Free switching channels for customer-specific test item control Technical Performance Data: Temperature Testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rates measured at the air supply, with DUT (Device Under Test) and heat radiation: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar cell modules, 100% tracking Gbodpfovb E Uqex Ah Roi Heat radiation: 3000 W continuously Technical data refer to ambient temperature of +25°C, nominal voltage 400 V, without test load, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection rating: IP 54 Cooling water connections: supply/return R1 ¼", internal thread Condensate drain (non-pressurized): R1" internal thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see image) (Subject to alterations and errors in technical data; information is not binding!) For further questions, please feel free to contact us by phone.