Beli Roda Mesin bekas (81.836)

Kondisi: bekas, Tahun pembuatan: 1982, en-GB-01 Lhsdpst Hwr Uofx Agleb

Kondisi: bekas, Tahun pembuatan: 1980, Rad diameter – max. 2500 mm Rad width 0 mm Module – max. 34 Module – min. 1 Total power requirement approx. 15 kW Machine weight approx. 15 t Required floor space approx. 4.20 x 2.00 x 2.90 m K L I N G E L N B E R G (Germany) Universal Involute and Helix Testing Machine Ljdpfx Aget Hw Aaeljhb Model PFSU 2500 Year approx. 1980 Serial No. B 2918 _____ Min/max. gear diameter: 250 - 2,500 mm Module range: 1 - 34 Maximum base circle diameter: 2,400 mm Measurable gear tooth length: 500 mm Stroke of measuring slide, approx.: 600 mm Helix angle: 0 - 45° Workpiece length between centers min./max.: 430 - 2,500 mm Workpiece diameter in counter bracket: 1,340 mm Workpiece table diameter: 690 mm Diagram magnification: 50/100/200/500/1000/2000 : 1 Max. permissible test weight of gear, approx.: 10,000 kg Total electrical load, approx.: 15 kW - 380 V - 50 Hz Weight of machine, approx.: 15,000 kg The machine is suitable for measuring the tooth profile and tooth flank traces on heavy-duty straight and helical spur gears. Accessories / Special Features: * Digital setting of base circle and digital angle settings, without use of base circle templates. * Length-adjustable support for dividing tester (test unit not included). * Capable of testing heavy workpieces. Motor-driven set-up, alignment, and testing process via push button. * Counter bracket can be swiveled back for loading heavy-duty gears and sprockets; other accessories included. Condition: This measuring machine must be reconditioned and retrofitted with a new CNC control system. However, the basic mechanics of the machine are sound, making it worthwhile for refurbishment. The machine cannot be demonstrated under power. Parts of the control panel are missing.

Kondisi: bekas, Tahun pembuatan: 1996, Workpiece diameter: 240 mm Center distance: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Space requirement approx.: [missing dimension] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Lodpfx Agjt Hwvmoljhb Model: RZR, Year of manufacture: 1996 # 74 105 Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30 ° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm/stroke Crowning approx.: 0.5 ° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool diameter outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Dressing speed of honing tool: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special Equipment SIEMENS CNC path control type 810 G allows input of all relevant gear data and the setup of the workpiece via conversational interface. With DNC interface RS 232 for data import and export. A-axis = swivel angle / Z-axis = table movement / X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment With integrated device for automatic threading of the honing wheel into the gear gap The tool swivel angle (A-axis) is also moved electronically, quickly, and accurately and hydraulically clamped, allowing for faster setup times. Hydraulic workpiece clamping via foot switch between workpiece spindle and tailstock; both units are movable on the workpiece table according to the workpiece. Fully enclosed working area with sliding doors and safety interlock High-end original REISHAUER honing oil filtration system Type RTO 40.10, with centrifuge and cooling unit for consistent honing oil temperature, oil mist filter, etc. Various diamond dressing tools mounted on arbors. Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit.

Kondisi: bekas, Tahun pembuatan: 1980, en-01 Ledjt Hwnispfx Aglohb

Kondisi: bekas, Tahun pembuatan: 1977, Max. grinding diameter: 400 mm Grinding width: 0 mm Module - max.: (not specified) Module - min.: (not specified) Total power requirement: 3 kW Machine weight approx.: 4.2 t Space requirement approx.: (not specified) Wheel diameter (min./max.): 64 - 320 mm Grindable module size: 1 - 12 module Max. hob width: 40 mm Number of teeth: 13 - 240 Roll radius - Ø: 73 - 320 mm Workpiece table feed rates: 5 - 20 - 30 - 40 teeth/min Grinding wheel speed: 690 rpm Grinding wheel diameter: 762 mm Grinding wheel swivel (engagement angle): 5-21° Grinding slide swivel (helix angle): 2 x 35° Vertical grinding slide adjustment: 240 mm Dressing speed: 1 / 0.5 / 0.25 m/min Grinding spindle drive / Total drive: 1.1 / 3 kW - 380 V - 50 Hz Weight approx.: 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal gear shaper wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Ljdpfx Agjt Hwnvslshb Unfortunately, no further accessories are available for the machine—an investment as a secondary machine is recommended if suitable tooling is already available.

Kondisi: bekas, Tahun pembuatan: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space requirement approx. m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type PFSU 1600 Year of manufacture: 1975, modernized in 1995 #B 2281 Working range: Min./Max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Stroke of measuring slide approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length in centers: approx. 1,150 mm Tailstock throat: 450 mm Diagram recording magnification: 50/250/500/1000 x Max. test gear weight: approx. 4,000 kg Weight approx.: 3,000 kg Total drive approx. 1 kW – 380 V – 50 Hz Lsdpfxjt Hwpto Aglshb Suitable for inspecting: - Tooth profile (involute) - Tooth lead (helix angle/lead) on internal and external gears, cutting and shaving gears, worms, etc. - Tooth runout, surface roughness - Determining/reconstructing base circle and helix angle, and more Accessories / Special equipment: - Optical base circle setting and optical angle adjustment; no base circle disks required - Designed to accept heavy workpieces; testing cycle can be motorized or manually controlled via handwheels - Rotating auxiliary table, Ø 480 mm, for mounting larger gear bodies, with 2 sets of different-length supports (400 and 470 mm), up to the maximum gear diameter of 1,600 mm - Counter-support AV 17 for maximum workpiece length of 1,150 mm - Separate electrical cabinet for manual movement control - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally German, program update to latest version V 21.17, ideal for generating modern test reports with graphics, graphic display on monitor, additional subprograms, HP printer, flat screen - Various probe inserts, small parts, adjustable mount for indexing test device (mounted at rear), leveling feet, etc. - Without indexing test device, but mounting provided and installed at rear Condition: very good – demonstration-ready, professionally dismantled and reinstalled.

Kondisi: bekas, Tahun pembuatan: 1997, Maximum wheel diameter: 215 mm Lodpfxot Hwxhs Aglehb Wheel width: 40.65 mm Module - max.: — Total power requirement: 20 kW Machine weight approx.: 10 t GLEASON (USA) CNC grinding machine for spiral and hypoid bevel gears Model: PHOENIX HG 200 Year of manufacture: 1997 --- Max. external workpiece diameter: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth range: 5 - 200 Max. gear ratio: 1:10 Grinding wheel diameter: 51–190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel offers advantages in terms of heat development and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured cost-effectively, at high quality and with consistent accuracy, featuring short setup times. For further details, refer to the brochure copy on our website. Condition: very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Additional gear cutting machines available from stock at all times. (Key dimensions repeated for completeness) X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (slide base): 304 mm Distance from machine center to spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32" Total drive approx.: 20 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special features: • FANUC – 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, elaborate coolant system with filtration unit, belt filter, etc. • Driven grinding wheel dresser with CNC dressing control for automatic compensation of form and diameter after each dressing • Gear grinding can be performed either using the single-component method with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional “dressable” aluminum oxide (cost-dependent). Grinding with a conical grinding wheel …

Kondisi: bekas, Tahun pembuatan: 1983, Workpiece diameter 250 mm Centre distance 0 mm Maximum honing length: --- mm Maximum module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D - 250 Year of manufacture 1983 * Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Lhsdpfx Aget Hwzpelob Module: 1 - 5 Gear length / Max. table stroke: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Cross slide rapid traverse: 50 mm Cross slide mechanical infeed: 1 - 8 mm/⌀ Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec Table speed hydraulic: 0 - 6 m/min Total drive: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-settable machining parameters via counters and control switches for automatic operation, with workpiece counter - All roughing and finishing infeeds adjustable via decade switches, table reversal times adjustable via potentiometer, rapid infeeds adjustable by time (1s = 0.04mm) - Ampere display, etc. - Capability for crowning and taper honing via templates, also possible off-centre; workpiece must be pre-machined accordingly - Stand-alone honing oil system with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, stand-alone hydraulics

Kondisi: bekas, Tahun pembuatan: 1980, Max. wheel diameter - 400 mm Wheel width - n/a mm Module - max. 5 Module - min. Total power requirement - kW Machine weight approx. t Space requirements approx. m Manual double-flank gear rolling tester Lhodpfx Ajt Hw Ebjglsb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 291127, diameter roda: 275 mm, lebar roda: 55 mm, produsen pengendali: Siemens, model controller: 840 C, EN: Face Milling – Single-Part Process – Continuous Method: - Workpiece and tool (usually Spiron) rotate simultaneously, and all teeth are generated at once in a single operation. - Cutter head features multiple cutter groups (not arranged in a circle) - Teeth with parallel height - Conical tooth top surface Single-Part Method: - Workpiece remains stationary, and the tool (usually Arcon) rotates and cuts a tooth by plunging into the workpiece. - Once a tooth is cut, the tool retracts, the workpiece indexes by one tooth width, and the next tooth is cut. This process repeats until all teeth are complete. - Cutter head has all cutters arranged along a circular path. - Height of the tooth is conical - Tooth top surface is parallel The C28 is capable of both processes: gear and pinion machining. For the single-part method, the C28 must be "prepared" – this includes direct measuring systems, workpiece axis drive brake, and a license file for single-part machining. TECHNICAL DETAILS Controller: Siemens 840 C Gear diameter: max. 275 mm Gear width: 55 mm Module: 1.5 - 6.5 Spiral angle: 0-60° Number of teeth: 6-120 mm Transmission ratio: 1:10 – 1:1 Cutter head radius: 62 - 110 mm Number of cutter groups: 5-19 (Oerlikon) Travel X / Y / Z axes: 500 / 885 / ±185 mm Motor speed per axis: 2,400 rpm Gear ratio X / Y / Z: 3:1 Leadscrew pitch per axis: 10 mm Movement E / V axis: -5° to 95° / ±7.5° Motor speed E / V axis: 400 / 900 rpm Travel speed E / V axis: 1,800 / 1,098 °/min Gear ratio E / V axis: 80:1 / 1:1 Mounting diameter A/B axis: 130 / 140 mm Spindle speed A/B axis: 667 / 345 rpm Permitted motor speed A/B axis: 10,000 / 4,500 rpm Gear ratio A/B axis: 15:1 / 13:1 Travel V1 axis: 85 – 225 mm Travel speed V1 axis: 6 m/min Motor speed V1 axis: 1,800 rpm Lead V1 axis: 5 mm Lsdjv I Ud Iopfx Aglshb Travel U axis: 112 – 258 mm Travel speed U axis: 0.6 m/min Gear ratio U axis: 4.3:1 Motor speed U axis: 3,000 rpm Leadscrew pitch U axis: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 m Power supply: 3x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: G0504, diameter benda kerja (maks.): 63 mm, jarak gerak sumbu Z: 105 mm, diameter luar: 275 mm, jarak antara pusat: 350 mm, sudut putar sumbu A (min.): -30 °, sudut putar sumbu A (maks.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Centres distance: 350 mm Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Centre height (tailstocks): 350 mm Fine adjustment head swivel range (U axis): +30 / -30° Centre distance tailstock/fine adjustment: min. 120 mm / max. 225 mm Input increment (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Cross Slide Travel (Z axis): 105 mm Input increment: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece Details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and Feeds Tool speed: max. 2,000 rpm Feed rate Z-direction: up to 2 m/min Feed rate X-direction: up to 2 m/min Feed rate U-direction: up to 2 m/min Feed rate V-direction: up to 2 m/min C3-direction: max. 12°/s Servo Drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X axis: 20.0 Nm at 3,000 rpm Z axis: 20.0 Nm at 3,000 rpm U axis: 6.0 Nm at 3,000 rpm Portal vertical (V1 axis): 6.0 Nm at 3,000 rpm Gripper rotary axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Ljdewmbmlepfx Agljhb Three-Phase Motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Coolant pump: 4 kW at 2,840 rpm Hydraulic Equipment Flow rate: 21 l/min System pressure: 50 bar Clamping pressure (headstock): max. 35 bar Clamping pressure (tailstock): min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space requirement: 2,700 x 2,300 x 2,600 mm Operating Fluids Hydraulic fluid: HLP D 46 Hydraulic fill volume: 100 l Electrical Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Fine adjustment head with U axis - Machine with complete hydraulic equipment - Dialogue-guided operating terminal

Kondisi: baik (bekas), Tahun pembuatan: 2002, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Ljdpsw N S E Aofx Agljhb Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: baik (bekas), Tahun pembuatan: 2004, Mountable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Cutter head mounting plate diameter (Ø) 360 mm Mounting taper nominal diameter for cutter heads Ø 58.227 mm Travel distance - Z axis 200 mm Recording diagram magnification ±10 - ±500 µm Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gearing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved with precisely set cutter heads. The Oerlikon cutter head setting and testing device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measurement process on the CNC-controlled inspection device is semi-automated: The respective actions required for the process are clearly displayed on the screen via operator guidance. The positioning of the individual cutters in the cutter head and the height of the cutter tips is performed largely automatically via a special process and is simultaneously documented in a run-out diagram. A subsequent measurement Ledpoul Efmsfx Aglohb process checks the radial position of the inner and outer cutting edges of all cutters in the cutter head. If certain test parameters of the cutters do not comply with tolerance specifications, they can be individually re-positioned. Through the combination of a semi-automated adjustment process, operator-guided setup actions, and an automatic measuring process, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and inspection process - Graphical display of the cutter head configuration and measurement results with tolerance check - Plain-language instructions for the operator (no encoded information) - Easy allocation of measurement results to individual cutters - Documentation of setting and measurement results via printer - Setting and inspection procedure suitable for blade-type cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Maximum wheel diameter: 400 mm Ledpfxount Uze Aglohb Wheel width: 600 mm Module – max.: 20 Module – min.: 0.1 Control: Frenco Machine weight: approx. 1.2 t Originally Klingelnberg measuring machine, rebuilt and modernised in 2014 by Frenco. Windows 10, Frenco FGI-Pro software, current maintenance Double flank rolling test.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 27498, panjang pemakanan sumbu X: 230 mm, panjang umpan sumbu Y: 170 mm, panjang umpan sumbu Z: 400 mm, diameter roda gigi: 130 mm, kecepatan spindel (maks.): 1.200 rpm, TECHNICAL DETAILS Wheel diameter: max. 130 mm Wheel width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Swivel angle of work spindle: ± 45° Tool change swivel angle: 90° Workpiece Maximum module (in steel with approx. 600 N/mm²): 4 Maximum rotational diameter (not millable): 480 mm Minimum number of machinable teeth: 3 Tool Maximum hob diameter: 130 mm Maximum cutter length (depending on arbor diameter): 220 mm Arbor diameter: 16 / 22 / 27 / 32 mm Arbor taper: ISO Workpiece spindle – WS External turning capacity: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travel X-axis travel: 230 mm Y-axis travel: 170 mm Z-axis travel: 400 mm Lhedpfx Agjwc Tduelsb Spindle Infinitely variable cutter speed: 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control Control unit: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space requirement: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connection load: approx. 56 kVA EQUIPMENT - CNC control Bosch CC 220 - Infinitely variable cutter speed control - Large travel range on all axes - High flexibility due to wide module range

Kondisi: sangat baik (bekas), Mesin pembuat roda gigi LIEBHERR LC 282 CNC Spesifikasi Produsen: LIEBHERR Model: LC 282 CNC Lhodoxgpqcjpfx Aglsb Kondisi: Bekas Nomor stok: Factory Diameter maks: 280 mm Putaran hob: 1200 rpm Modul: 7 Diameter meja: 250 mm Putaran meja: 100/200 min Jarak min-maks antara benda kerja dan hob: 30 - 300 mm Kemiringan kepala: 45° Diameter maks hob: 160 mm Berat mesin: 12.000 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter meja: 430 mm, Harga untuk kedua mesin – hanya dijual sebagai satu paket. Merek: STAEHELY SH 500 Aksesori: roda gigi pengganti, arbor, dan satu mesin dengan kepala frais tangensial (lihat foto)!!!!! Ledpfx Agexfub Delohb Diameter meja = 430 mm Diameter roda gigi maks. = 500 mm Lebar roda gigi = 240 mm Modul = 6

Kondisi: baik (bekas), Tahun pembuatan: 1970, Track width: 900 - 1680 mm Max. wheel diameter: 1300 mm Min. wheel diameter: 650 mm Max. base frame length: 2350 mm Min. base frame length: 2050 mm Max. clamping diameter: 1050 mm Min. clamping diameter: 700 mm Faceplate diameter: 1400 mm Spindle speed: 31.6 rpm Ljdpjwvkb Rsfx Agljhb Number of supports: 2 Copying devices: 2 Power: 90 kW Length: 5400 mm Width: 3600 mm Height: 2900 mm Weight: 56000 kg

Kondisi: sangat baik (bekas), Max. wheel diameter: 1600 mm Min. wheel diameter: 800 mm Gear width: 560 mm Lhsdpfx Agov Igc Nelsb Max. module: 16 Min. module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine equipped with change gears, arbors, and fixture set Machine is in very good condition

Kondisi: sangat baik (bekas), Contact wheels for belt grinders by FICARD - Friedrich August Picard Wheels suitable, among others, for grinders such as GREIF or METABO Set of 4 wheels with the following specifications: Lhsdpfx Agjwtzruoleb - 450 mm diameter - 50 mm wheel thickness - 45 mm bore diameter - SH 65 hardness

Kondisi: sangat baik (bekas), Contact wheels for belt grinders by FICARD - Friedrich August Picard Wheels suitable for grinders such as GREIF or METABO 2 wheels with the following specifications: No. 1 – wheel with rubber coating - Diameter: 450 mm - Wheel width: 50 mm - Bore diameter: 32 mm - Hardness: SH 65 No. 2 – wheel with sponge coating - Diameter: 400 mm - Wheel width: 50 mm Lhjdewt Akropfx Agljb - Bore diameter: 32 mm - Hardness: SH 25

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 25.000 kg, lebar roda: 3.000 mm, panjang pemakanan sumbu X: 1.000 mm, LIEBHERR L3002 CNC intern och extern kugghyvler Ljdpfx Ajwdmy Ejglshb Tillverkningsår: 1982, moderniserad 2006 med CNC SIEMENS 840 D. Max. hjuldiameter: 3.000 mm. Max. spiralvinkel: 45° För invändig och utvändig bearbetning. 44/50 kW.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Dressing machine for grinding wheels: Easy to operate, robust, and precise Our grinding wheel dressing machine provides an unbeatable combination of user-friendly operation and exceptional stability. The solid granite base ensures maximum precision and long service life, while the intuitive controls maximize efficiency in your workshop. While you continue production on your tool grinding machine, our dresser saves you both time and money. Lodpoha Eh Hsfx Aglehb Ideal for anyone who values reliable performance and excellent value for money!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 27604, panjang umpan sumbu Y: 170 mm, panjang umpan sumbu Z: 200 mm, diameter meja: 160 mm, kecepatan spindel (maks.): 600 rpm, TECHNICAL DETAILS X-axis: 150 mm Y-axis: 170 mm Z-axis: 200 mm Swivel angle: -150/30° Milling unit Max. hob diameter: 130 mm Max. hob length (shank-type cutter): 220 mm Max. module: 3 Cutter length: max. 220 mm Cutter speeds: stepless up to 600 rpm Cutter arbor diameter: 32 mm Table Table diameter: 160 mm Table bore diameter: 63 mm Control & Retrofit Control system: SINUMERIK 840 D SIEMENS Retrofit: Sinumerik 840 D / Windows XP Pro in 2010 MACHINE DETAILS Total power requirement: approx. 20 kW Machine weight: approx. 10,500 kg Required space: approx. 6.8 x 3.7 x 2.85 m Lodpfxjv Rdwio Aglehb

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 986003, kecepatan roda gerinda: 6.000 rpm, diameter alat: 230 mm, jarak pergerakan sumbu X: 325 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 470 mm, TECHNICAL DETAILS Maximum transmission ratio: 10:1 Number of teeth: 3 - 200 Tooth height: 20 mm Maximum tooth width: 58 mm Control: SIN 840 D SIEMENS Axes X-axis: 325 mm Y-axis: 350 mm Z-axis: 470 mm Lhjdpfov Rcn Hox Aglsb B-axis: +90.1° / -1° Spindle Grinding spindle speeds: stepless up to 6,000 rpm Workpiece spindle speed: 1,200 rpm Tooling Maximum tool diameter: 230 mm Minimum tool diameter: 69.85 mm Table diameter: 212.71 mm MACHINE DETAILS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 m x 4.40 m x 3.30 m Transport dimensions machine: 4 x 2.5 x 2.85 m / 11 t Transport dimensions water tank: 3.55 x 2.41 x 2.5 m / 1.8 t Transport dimensions cooler: 1.5 x 0.8 x 1.1 m / 0.2 t Transport dimensions sheet metal parts: 2.5 x 1.1 x 0.8 m / 0.25 t EQUIPMENT - Hoffmann HSF 100 V coolant filtration system