Beli Traub Tb 42 bekas (97)

Kondisi: baik (bekas), Tahun pembuatan: 2013, AUTOMATIC BAR LATHE TRAUB A 25 Year: 2013 Turning length: 65 mm Total power requirement: 2 kW Nsdpfewc Amxex Aahsdf Machine weight approx. 0.7 t Space requirements approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar loader included!

Kondisi: baik (bekas), Max. bar passage: 36 mm Max. spindle speed: 6,300 rpm Number of spindles: 2 Control: Traub TX8i Tool Turret 1: Number of tools: 12 Ndedpotrvzxefx Aahjf X-axis: 50 mm Z-axis: 50 mm Front Tool Turret: Number of tools: 7 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Rear Tool Turret: Number of tools: 5 Speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy Njdsvldx Aopfx Aahedf The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNX65 with bar loader and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Both tool turrets have been refitted with new seals - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer’s tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET HEAD Nodpfx Aajwm Igfjhsdf - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Kondisi: sangat baik (bekas), Traub TNL12 CNC Swiss Kapasitas 12 mm Jam produksi: 25.596 jam Sistem Pemadam Api Kraft & Bauer Filter kertas: Kompakt Band Filter Konfigurasi sesuai foto (foto tambahan menyusul) Mulai produksi tahun 2009 (model pameran asli) Bar feeder FMB 12 kaki Pengumpul kabut Konveyor serbuk Njdpfow R E Adox Aahsdf "2 mesin tersedia"

Kondisi: bekas, TECHNICAL DATA Ndsdpfx Aeuhav Deahsf - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 22.232 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 317, panjang pembubutan: 1.000 mm, diameter pembubutan: 680 mm, daya motor spindle: 60.000 W, kecepatan spindel (maks.): 2.800 rpm, Perlengkapan: konveyor serpihan, RINCIAN TEKNIS Panjang pembubutan: 1.000 mm Diameter pembubutan: 680 mm Daya motor spindle: 60.000 W Putaran spindle maksimum: 2.800 rpm Nsdpfxjw Rp Svs Aahjdf RINCIAN MESIN Model kontrol: TX 8H Data listrik Tegangan operasi: 400 V 3~ Tegangan kontrol: 24 V ~ Tegangan katup: 24 V – Tegangan kopling: 24 V – Daya total: 60 kW Arus total: 100 A Waktu operasi spindle: 22.232 jam PERLENGKAPAN Dokumentasi/manual Putaran dapat diatur secara kontinu Konveyor serbuk RUEZ SFWW2 Oil separator Pemegang alat VDI40 Dokumentasi lengkap Catatan: Pembongkaran dan pemuatan dapat didukung dengan personel dan derek.

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), Swing diameter over bed/cross slide: 360mm/160mm, distance between centers: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Ndjdpfx Aowmqx Djahsf

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Ndodewcqv Iepfx Aahof

Kondisi: baik (bekas), Tahun pembuatan: 1994, TRAUB TNS 65 D / 5-Axis CNC Turning and Milling Machine - TX8 D Control - Complete technical data available in photos - Year of manufacture: 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Errors and omissions excepted. Nodpfxjw D Df Ee Aahsdf

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 60.764 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030637, Mesin dalam kondisi baik dan siap pakai, saat ini masih dapat dilihat dalam keadaan teraliri listrik. Pembongkaran dan pemindahan mesin menjadi tanggung jawab pembeli. Mesin ini memiliki 2 turret masing-masing dengan 12 posisi alat, semua posisi alat tersebut berpenggerak. Selain itu terdapat perangkat depan dengan 5 posisi alat, 4 di antaranya berpenggerak, serta perangkat belakang dengan 5 posisi alat, 4 juga berpenggerak. Chuck spindle utama adalah Hainbuch 32, sedangkan spindle berlawanan menggunakan Axfix dari Hainbuch. Berbagai dudukan dasar alat dapat disertakan. Nedpfxjw N Rzis Aahjdf

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] Ndodpfx Asuhaw Uoahef - Z-axis stroke: 48 [mm] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. Ndodpfxswi I Eye Aahef The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Tahun pembuatan: 1983, Kondisi: siap digunakan (bekas), Swing diameter: 320 mm, turning length: 1,000 mm, spindle bore: 80 mm, spindle speed: 3,150 rpm, travel X/Z: 265 mm / 1,000 mm. Machine dimensions X/Y/Z: approx. 5,500 mm / 2,400 mm / 2,400 mm, weight: approx. 7,000 kg, control system: Traub System TX-8. Includes a tool set, three-jaw chuck, and bar feeder with collets. Documentation available. Inspection on site is possible. Nedpfx Aaswzld Dehodf

Kondisi: baik (bekas), Tahun pembuatan: 1989, 1 x automatic lathe Traub TD 16 Year of manufacture: 1989 with hydraulic single bar feeder Nodpfx Aajvga A Tshsdf LNS Hydrobar 3.16 -HS 4.4 Year of manufacture: 1989 Equipment: 6-position turret Quick-change material clamping Sliding headstock device Centralized lubrication by Vogel Accessories: see photos The machine can be inspected under power.

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Ndedov Im Sdspfx Aahsf

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm Ndsdpfsuhaxfsx Aahof - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Nsdpfx Aaewi Izhjhedf Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW Ndedpfx Asuhawzsahof EQUIPMENT - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 51.400 h, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, Ndedpfx Aajwxc Hkohsf 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed holders Short bar loader Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, can be inspected Delivery time approx. 2 weeks by arrangement

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [deg] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 [mm] - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 4 COUNTER OPERATION - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 18 [kW] Nedjuhawujpfx Aahsdf ACCESSORIES - Control: Traub TX8i - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts catcher - Coolant tank: 200 [l] - Chip conveyor: KNOLL - Bar feeder: FMB Minimag 3200 C - Number of driven toolholders: 2 - Number of fixed toolholders: 14 - Set of collet holders for chuck: F20 - Set of collet holders for chuck: F16 - Sleeves: 4 - Set of trays and collets for bar loading magazine - Tool presetting device

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg OPERATING HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S Ndsdpfx Aouhadzeahjf - Electronic handwheel - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor - Number of driven tool holders: 6 - Number of fixed tool holders: 33 - Collet chuck: 2 HAINBUCH