Beli Traub Td 26 bekas (94)

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 42 mm, panjang pembubutan: 206 mm, TECHNICAL DETAILS Spindle power: 5.5 - 9 kW Rcjdpfx Abswtq Ufj Hoh Max. workpiece length: 206 mm Spindle bore: 42 mm Tool turret: 4 stations MACHINE DETAILS Length (L - R): 2,500 mm Width (F - B): 900 mm Height: 1,700 mm

Kondisi: baik (bekas), Tahun pembuatan: 2000, Traub TNL12/7 CNC Lathe Spindle bore: 12.7 mm Turning length: 130 mm Main spindle: 4 kW; C-axis 0.001°; 12,000 rpm Turret 1 - X1 and Y1 axes, 6 tool stations, driven tools 1.5 kW Turret 2 - X1 and Z2 axes, 6 tool stations, driven tools 1.5 kW Sub-spindle: 2.5 kW; C-axis 0.001°; 12,000 rpm Front attachment - Z3; Z4/X3 axes, driven tools Rear attachment - X4 axis, driven tools 1.5 kW Rcodpfxspuilvo Ab Hjh Bar feeder: FMB Minimag The machine comes with extensive tooling and a wide range of tool holders. Connected to power and in continuous production. 1. TNL12/7 s/n: 248, year: 2000, 7 linear axes (X1, Z1, Y1, X2, Z2, X3, Z3 + 2x C-axis), complete with FMB Minimag bar feeder and Knoll chip conveyor.

Kondisi: bekas, Tahun pembuatan: 1989, Control system / Rsdpfx Aoud Inmeb Hsch Centre distance // mm Swing diameter over bed / mm Control system: TRAUB System TX-8 Max. bar capacity (spindle bore) mm 42 Chuck diameter mm 200 Turning diameter mm 180 Turning length mm 450 Max. swing diameter mm 450 Swing diameter over sorting device mm 350 Swing diameter over cross-set tailstock mm 180 Swing diameter over steady rest body mm 240 Longitudinal slide travel | mm 490 Cross slide travel mm 160 Spindle nose DIN 55.026 = 26 - Spindle diameter in front bearing mm 85 Power: 41 kW

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNC65DGY, TX8I, Year 2005, Serial No. 1130 Description Y-axis on S1, V-axis, 2x C-axis, 2x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and sub spindle, parts catcher, bar feeder Iemca Master 880MP-E. Condition Very well maintained, good condition, serviced. The machine geometry has been checked and adjusted/set. Machine can be inspected under power – or video available. Rcjdpfxowi I Eyo Ab Hjh Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinder. The warranty expressly only covers spare parts, not downtime or labor hours, travel time. Warranty does not apply to parts other than those listed above, e.g., wear parts, electrical, electronics, hydraulics, etc.

Kondisi: bekas, Grinding wheel dresser, cup wheel dresser, bench grinder dresser, surface grinding machine dresser, cylindrical grinding machine dresser, dressing head, truing head for grinding machines Rsdpjd R Ikdofx Ab Hjch - Quantity: 1x wheel dresser available - Price: per piece - Dimensions: 325/130/H135 mm - Weight: 7.3 kg

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 37.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNX65 with bar loader and accessories Year of manufacture: 2006 Operating hours: 37,000 h Control: TX8i - Both tool turrets have been refitted with new seals - High-pressure pump replaced - Machine fully operational - Geometry within manufacturer’s tolerance Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW Rsdpfx Aswm Igfeb Hjch RIGHT LOWER TURRET HEAD - Number of positions: 10 - Number of driven positions: 10 - X/Z travel path: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jam operasional: 49.274 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 247, panjang pembubutan: 80 mm, kecepatan spindel (maks.): 12.000 rpm, panjang pemakanan sumbu X: 35 mm, panjang umpan sumbu Y: 37 mm, panjang umpan sumbu Z: 75 mm, Diameter batang (maks.): 12 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Rodpovrz E Hofx Ab Hoch Control: Mitsubishi TX-8i Turning length: 80 mm Main Spindle Technology: Belt-driven spindle Spindle speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12.7 mm Travel in Z1: 75 mm Workpiece clamping: Collet chuck Counter Spindle Technology: Belt-driven spindle Spindle speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222 mm / 139 mm Rapid traverse in X3/Z4: 30 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (driven) Tool holder: Ø 25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35 mm / 37.5 mm Rapid traverse in X1/Y1: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222 mm / 139 mm Rapid traverse in X3/Z3: 30 m/min Rear Attachment Number of stations: 4 Tool holder: Ø 28 mm Pitch: 32 mm MACHINE DETAILS Dimensions: 1,450 x 950 x 1,480 mm Weight: 1,600 kg Connected load: 16 kW Installation dimensions: 7,943 x 1,430 x 1,480 mm Control on-time: 96,171 h Machine on-time: 100,147 h Production time: 45,983 h Spindle 1: 49,274 h Spindle 2: 47,771 h Spindle 5: 15,297 h EQUIPMENT - Chip management: Chip conveyor - Coolant management: Coolant pump - Bar feeder: FMB minimag 3200 - Finished part discharge: Finished part discharge unit (tube) - Emulsion mist extraction: Interface mechanically prepared - Tool holders: Various fixed and driven holders

Kondisi: sangat baik (bekas), Multispindle and bar automatic lathes TRAUB TK 42 * Spindle power: 5.5 – 9 kW * Max. workpiece length: 206 mm Rsdpfx Abjwc Aqde Hjch * Spindle bore: 42 mm * Length (L – R): 2500 mm * Width (F – B): 900 mm * Height: 1700 mm * Tool changer mount: 4 slides

Kondisi: baik (bekas), Tahun pembuatan: 1996, CNC turning center TRAUB Type: TNC65 DG, Year of manufacture: 1996, Control: TRAUB TX8F Redeu Eug Iepfx Ab Hsch Comes with extensive accessories.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe Redpfxswi Izho Ab Hsch TNC65DGY, TX8H, year 2001 • 2x 10-position turrets with driven tool holders, VDI30 • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 clamping system on main and sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts manual, circuit diagram, ATC optics Very good condition. Can be inspected under power. The machine geometry has been checked and adjusted/set.

Kondisi: bekas, Feeler gauge, dial indicator, measuring probe, precision dial gauge - Manufacturer: Traub, precision dial gauge - Measuring range: 0-5 mm - Reading accuracy: 0.01 mm - Model: Hoffmann 43250 5/40 - Quantity: 4 dial indicators available - Price: per unit Rcodpfx Ajurn R Seb Hjh - Case dimensions: 105/60/H25 mm - Weight: 0.1 kg/unit

Kondisi: bekas, Tahun pembuatan: 1983, Fungsionalitas: fungsi terbatas, diameter putar di atas sled silang: 160 mm, panjang pembubutan: 800 mm, lubang spindel: 60 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 810 mm, pergerakan cepat sumbu Z: 10.000 m/menit, kecepatan rotasi (maks.): 3.150 rpm, tinggi total: 1.800 mm, panjang total: 1.800 mm, lebar total: 3.300 mm, diameter ayun di atas peluncur silang: 160 mm, diameter pembubutan di atas alas geser: 360 mm, berat keseluruhan: 3.100 kg, Technical details: TRAUB TND 360 (year 1983) Swing diameter over bed: 360 mm Swing diameter over cross slide: 160 mm Turning length: 800 mm Longitudinal travel (Z-axis): 810 mm Cross travel (X-axis): 205 mm Control system: TX-8 Spindle bore: 60 mm Spindle speed: 63 - 3150 rpm / 2-speed Feed rate: 10,000 mm/min Turret head - number of stations: 8 Tailstock quill taper: SK30 DIN 2080 Tailstock quill travel: 105 mm Rsdpfowm Dhxox Ab Hoch Operating pressure: 40 bar Total power requirement: 38 kW Machine weight approx.: 3.1 tons Machine dimensions approx. (L x W x H): 1.8 x 3.3 x 1.8 m Hydraulic system dimensions: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm (without jaws), hydraulic

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Traub automatic lathe Rjdpfxswcqv Is Ab Hech

Kondisi: baik (bekas), Tahun pembuatan: 2013, AUTOMATIC BAR LATHE TRAUB A 25 Year: 2013 Turning length: 65 mm Total power requirement: 2 kW Machine weight approx. 0.7 t Redpfx Abjwc Amxo Hech Space requirements approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar loader included!

Tahun pembuatan: 2005, Kondisi: baik (bekas), 7 pieces of driven tool holders suitable for CNC lathe TRAUB TNA 480, toolholder size VDI 40. Redohwnfkepfx Ab Hjch Also compatible with SAUTER tool turrets with VDI 40 mount. 7 pieces horizontal, nos. 3/4/5/6/7/8/9, for drilling and milling – price per piece €550 2 pieces horizontal, nos. 1 and 2, for tapping – price per piece €600 1 NC drill chuck VDI 40, clamping range 1–13 mm – price €100 1 NC drill chuck VDI 40, clamping range 2.5–16 mm – price €150

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 51.400 h, Fungsionalitas: berfungsi sepenuhnya, Traub CNC lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, new hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed holders Short bar loader Breuning Approx. 114,586 power-on hours Approx. 51,400 production hours Good condition Under power, can be inspected Delivery time approx. 2 weeks by arrangement Rcodjwxc Hkjpfx Ab Hjh

Kondisi: belum diuji (bekas), Traub TNL 12/7 Rodpfxovk Tl Ne Ab Hoch

Kondisi: belum diuji (bekas), Tahun pembuatan: 1994, jam operasional: 8.000 h, Fungsionalitas: belum diuji, Machine in good condition Rcedsv Im Sdspfx Ab Hjh

Kondisi: baik (bekas), Tahun pembuatan: 2007, Traub TNX 65/42 Fräs- und Drehzentrum Baujahr 2007 Seriennummer: 7060107 Inbetriebnahme: 2010 TX 8i-S Steuerung (Mitsubishi/Traub-basierte Steuerung mit Mitsubishi-Antrieben und -Motoren) 15 CNC-Achsen Vier (4) X-Y-Z Revolver mit jeweils 10 Positionen (bis zu 20 Werkzeuge je Revolver möglich) 65 mm Spindeldurchlass an Haupt- und Gegenspindel (Gegenspindel mit Kühlmittelspülung) Fußpedalsteuerung zum Spannen/Lösen der Spannfutter Servogesteuerte Portaleinheit Hydraulisch schwenkbar mit pneumatischem Fertigteil- und Reststückgreifer Fertigteilförderband RESY Papierband-Kühlschmierstofffilter Knoll-Kühlmitteltank mit BKW Kältemittel-Temperaturregelung 20 bar Hochdruck- und 8 bar Niederdruck-Kühlmittelpumpen Knoll Späneförderer FMB Turbo 5-55 Stangenlademagazin (neu 2010) 2 Einzelstangen-Drehhalter 2 Doppelstangen-Drehhalter 1 Abstechhalter 1 angetriebener doppelter radialer ER Spannzangenhalter 1 angetriebener radialer ER Spannzangenhalter 4 radiale angetriebene ER Spannzangenhalter 1 radialer angetriebener Fräserhalter Redpfx Aoq Npqmjb Hoch 1 winkelverstellbarer angetriebener ER Spannzangenhalter 2 radiale angetriebene Messerkopfhalter 2 axiale angetriebene Fräserhalter 6 axiale angetriebene ER Spannzangenhalter 43 zusätzliche Werkzeughalter auf separater Liste (siehe Anhang) Hainbuch Hauptspindel-Spannzangenfutter Röhm 2-Backen-Futter an der Gegenspindel 2 Ersatzsätze Kugelumlaufspindeln und Lagerpakete für die Z-Achse.