Impact protection

Stahl L-Form Höhe 400 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Bwedpfx Ansmhhypepjw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments Bjdpfxoh Ek Daj Anpeww - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: bekas, jarak tempuh: 250 km, daya: 235 kW (319,51 hp), pendaftaran pertama: 09/2025, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, filter jelaga, pendingin udara, penggerak semua roda,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side Bwodpfsmkixwex Anpjw - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Bwodpemhh Dhofx Anpsw - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: baik (bekas), stahltreppe-20240619 Bwedpfx Ansrg Ivbspjw

Kondisi: bekas, jarak tempuh: 237.089 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 03/2016, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 02/2026, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, volume ruang muat: 6 m³, panjang ruang muatan: 4.200 mm, lebar ruang muat: 2.420 mm, tinggi ruang muatan: 600 mm, Perlengkapan: ABS, derek, penggerak semua roda, sistem navigasi,

Kondisi: bekas, jarak tempuh: 110.000 km, daya: 120 kW (163,15 hp), pendaftaran pertama: 08/2019, jenis bahan bakar: diesel, berat keseluruhan: 5.000 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 6.980 mm, panjang ruang muatan: 4.250 mm, Tahun pembuatan: 2019, Perlengkapan: ABS, filter jelaga, kunci sentral, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baik (bekas), Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 11,945 mm Number of bays per rack row: 04 pcs. à 2,880 mm Number of levels incl. ground level: 04 pcs. Scope of delivery includes: 05x pallet rack uprights, used Material color: cream white Upright profile: 85 x 50 x 17 x 3.0 mm Upright type: C 808 S275 Including horizontal and diagonal braces, base plates The uprights are pre-assembled (welded truss design) 6,640 mm high 870 mm deep 32x pallet rack beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per pair of beams: 1,600 kg (with evenly distributed load) 64x locking pins, used Design: fully galvanized For securing the cross beams against accidental lifting 20x heavy-duty anchors, new Manufacturer: MKT Design: galvanized steel Approved for: non-cracked concrete Through bolt fastening: M 12-13/95 10x leveling plates, used Design: fully galvanized For leveling rack uprights that are installed on uneven floors Bjdji D Em Aopfx Anpeww 01x load rating sign with details on bay and shelf loads, manufacturer, and commission number Dimensions: 80 x 220 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas muatan per bagian penyimpanan: 3.000 kg, tinggi rak: 7.500 mm, panjang penyangga: 2.700 mm, panjang rak: 28.320 mm, kapasitas angkut: 3.000 kg, berat keseluruhan: 12.000 kg, tinggi rangka: 7.500 mm, Dijual sistem rak BITO berkualitas tinggi – telah diperiksa, lengkap, dan siap digunakan. Spesifikasi teknis: • Tinggi rangka: 7.500 mm • Lebar ruang antar rak: 2.700 mm • Kapasitas beban per rak: 3.000 kg • Kapasitas beban per bidang: 12.000 kg • Tiang: BITO P4 – 7.500×1.100×120mm • Palang: BITO PT120M – 2.700×120mm Isi pengiriman: • 11 × Rangka tiang • 80 × Palang • Termasuk baut, pin pengaman, dan aksesori Pengiriman dan pemasangan dapat dilakukan berdasarkan permintaan – di seluruh wilayah Jerman. Ideal untuk gudang, logistik, produksi, atau perdagangan. Produk bermerek dari BITO, salah satu produsen terkemuka untuk teknologi penyimpanan. Teknologi rak berkualitas tinggi dengan harga yang wajar, bukan produk baru yang mahal. Bsdpfx Aozqv A Hsnpoww Jika tertarik, silakan hubungi kami – jumlah dan ukuran lainnya tersedia berdasarkan permintaan.