Beli Pusat pemrosesan dengan umpan terus bekas (136)

Kondisi: baru, Tahun pembuatan: 2024, Axle 920 mm X-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed rate 20 m/min A-axis 360 degrees Minimum dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X direction Maximum cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Nodpfxocnz H He Aglecl Location: Ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Axle 920 mm X-axis 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: X = 300 mm Y = 120 mm Z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction Maximum groove depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Location: arriving in stock 54634 Bitburg Ncedpfx Ajfmdcqoglol - immediately available -

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE Ncjdpexy Tmnjfx Aglol The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: bekas, Tahun pembuatan: 2016, Bidang kerja: X=3300 mm Y=1280 mm Z=150 mm Tinggi ruang bebas Terminal kontrol: Layar warna LED 24" Terminal genggam untuk pengaturan kecepatan sumbu Perangkat lunak: "Woodflash" Pompa vakum 90 m³/jam/50 Hz atau 108 m³/jam / 60 Hz Spindel milling 12 kW HSK F63 (12.000 rpm) Pengganti alat linear 12 posisi di kiri rangka mesin + tempat pickup Kepala bor DH 16 4H 2S: 12 spindel vertikal 4 spindel horizontal 2 gergaji alur Lokasi penyimpanan: Pemasok Ncjdpjxy Tlwefx Agljl

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, CNC drilling machine for precise single-part and series production A drilling head with seven vertical, four horizontal spindles, and a grooving saw unit Equipment: Roller conveyor for workpiece infeed and outfeed Edge sensor Pressure-boosted Y-axis for hard material machining Automatic lubrication Operator interface software: Maestro CNC QWERTY keyboard for convenient data entry Nsdjwz Nuyepfx Agljcl

Kondisi: bekas, Complete manufacturing line for the production of slatted bed bases. From wood processing to final assembly/packaging. Includes all components such as milling machines, saws, profile processing, forklifts, compressors, etc. The larger machines/systems are from approximately the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multi-blade Saw RAIMANN KR 450 + KS 310 - Optimizing Cut-off Saw GRECON ILLERTISSEN OPTICUT 704R - Four-Sided Planer WEINIG HYDROMAT 23 - Stacking Unit Foiling / Finishing of Longitudinal Rails: - 2 x Profile Wrapping Machine FRIZ OPTIMA PU25-PAP - Film Slitting Machine FRIZ FSM 1500 CNC Drilling and Sawing Units - KOCH Drilling and Sawing Unit, with Turning and Stacking Unit - ISE CNC Drilling and Sawing Unit with Stacking Unit - 2 x ISE CNC Woodworking Center / Drilling Units Ncedpfx Agjx S Scbeljl - ISE CNC Slat Milling Machine - 2 x Manual Slat Drilling Machines Individual Machines - GANNOmat CNC Drilling and Dowel Inserting Machine - Pnahans Spindle Moulder - 2 x EiMa Double-Headed Saws - SCM Panel Saw - Barth Frame Press - 2 x FLOTT Column Drilling Machine - SAMCO Combination Saw-Milling Machine - 2 x Multi-Spindle Drilling Machine - 2 x Belt Sanders - Paint Booth - Various Small Machines Assembly - Automatic Assembler for Standard Slatted Frames - Press-In Machine / Capping Line - 14 x Pneumatic Assembly Tables Logistics – Factory Equipment - 3 x LINDE Forklift Trucks E16 / E20 - 7 x LINDE High-Lift Trucks / Electric Pallet Stackers - WEYCOR Wheel Loader 95E SUPER - Atlas-Copco Compressor System - WEIMA Single-Shaft Shredder - Kärcher Ride-On Sweeper - HONDA Snow Blower - Outdoor Extraction System - Batch of Mesh Containers + Euro Pallets - Various Rack Systems Packaging - Shrink Tunnel System - Stationary Pallet Wrapper - Mobile Pallet Wrapper Materials - Remaining stock of wood / spring slats - Remaining stock of end caps / plastic parts - Remaining stock of various assembly materials Many more PHOTOS and detailed DATA available upon request.

Kondisi: bekas, Tahun pembuatan: 2010, nomor mesin/kendaraan: 9532, panjang total: 30.000 mm, lebar total: 3.000 mm, tinggi total: 3.000 mm, advertisement-text-hundegger-sc-3-cnc-throughfeed-processing-cen tre-year-2010-for-sale-hundegger-sc-3-year-of-manufacture-2010—a- proven-and-powerful-cnc-throughfeed-processing-centre-for-modern- timber-construction.-the-machine-is-ideal-for-carpentry-shops,-jo inery-factories-and-industrial-timber-processing,-impressing-with -high-precision,-reliability-and-productivity.-highlights:-cnc-co ntrolled-throughfeed-processing-centre-high-degree-of-automation- and-efficient-material-flow-precise-cutting-of-timber-components- versatile-machining-options—depending-on-the-available-optional-a ggregates-or-by-retrofitting,-operations-such-as-drilling,-millin g,-slotting,-marking-and-labelling-are-possible-robust-and-durabl e-design-by-hundegger-technical-specifications:-manufacturer:-hun degger-model:-sc-3-year-of-construction:-2010-condition:-used,-fr om-ongoing-production-location:-estonia-price:-on-request-/-as-pe r-listing-the-hundegger-sc-3-is-an-economical-solution-for-increa sing-throughput,-accuracy-and-process-reliability-in-timber-proce ssing.-📩-for-further-information,-technical-details-or-to-arrange -a-viewing,-please-contact-us. Ncsdpfx Ajx Rkrfogljl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Mesin CNC nesting 4 sumbu untuk pembuatan lemari - terdiri dari 4 bagian: bagian 1: lift panel otomatis; bagian 2: mesin label otomatis; bagian 3: CNC 4 sumbu; bagian 4: meja keluaran otomatis. Keempat bagian bekerja bersama-sama. Termasuk instalasi ekstraksi dan pompa vakum pada ranjang CNC. Kepala spindle kompatibel ISO30 ER32. Termasuk program kabinet 3D (perangkat lunak Haixun), Haixun Quick Design + Haixun Quick Production disertakan. Suku cadang dan label cadangan termasuk dalam paket ini. Dimensi panel kontrol: 80x60x190 cm. Dimensi instalasi ekstraksi: 140x80x140 cm. Dimensi mesin label: 4000x2700x1800 mm. Ncjdpfx Ajv Dupvjglsl

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Max. workpiece length X: unlimited Min. workpiece length X: 250 mm Travel speed X: 0–25 m/min Max. workpiece width Y: 1,000 mm Ncjdpfx Agor Hbhvslol Min. workpiece width Y: 85 mm Travel speed Y: 0–50 m/min Max. workpiece thickness Z: 60 mm Min. workpiece thickness Z: 10 mm Travel speed Z: 0–20 m/min Vertical spindles Y-axis: 5 units Horizontal twin drilling spindles X-axis: 2 + 2 units Horizontal twin drilling spindles Y-axis: 1 + 1 unit Aggregates: 16-spindle drilling head Special equipment: Clamex package, door package Drilling spindle speed: 4,000 rpm Drilling spindle pitch: 32 mm Motor output: 1.7 kW Grooving saw: X-axis Saw blade Ø: 125 mm Extraction connection Ø: 150 mm Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm Weight: 1,500 kg

Kondisi: baru, Tahun pembuatan: 2022, The new universal CNC drilling machine, ideal for woodworking shops and craftsmen, offering an excellent price/performance ratio. Machine including options: - Sensor for panel calibration on the opposite side - Pressure booster in the Z-axis - Automatic lubrication - Machine operation interface software "Maestro CNC" - QWERTY keyboard - 10'' touch screen Max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm Min. workpiece dimensions X-Y-Z = 300 x 90 x 10 mm Max. travel speed for X-Y axes: 20 m/min Number of spindles X-axis: 2 Number of spindles Y-axis: 2 Number of spindles Z-axis: 7 Grooving saw blade diameter: 125 mm Note for used machines: - Technical data errors and prior sale excepted. - All stated prices are ex-works, loaded free on truck! - The machines have been cleaned and function-tested. - All machines are sold as seen, without any warranty claims. Ncedpfsfhy R Njx Aglel Buyers are welcome to inspect the machines on site. - Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 2012, available by appointment Machine design: fixed gantry machine Machining size in X-direction: 3548 mm Machining size in Y-direction: 1350 mm Machining thickness (Z-axis): 160 mm Number of main spindles: 1 unit Main spindle power: 11 kW Main spindle speed: 1,200–20,000 rpm Clamping system: HSK-63 F Spindle cooling: liquid cooling Number of axes: 5 Tool changer: disc-type changer Tool change positions: 12 units Rear wall groove units: yes Vertical drilling spindles - X-direction: 10 units Vertical drilling spindles - Y-direction: 8 units Spindle speed, vertical drilling spindle: 6,000 rpm Horizontal drilling spindle in X-direction: 2+2 units Horizontal drilling spindle in Y-direction: 2+2 units Spindle speed, horizontal drilling spindle: 6,000 rpm Control type: PC control Operating system: Windows Typewriter keyboard: yes Mouse: yes Programming system: Xilog DXF interface: yes CD-ROM drive: yes Table design: console table, tubeless Stop system: stop cylinders for veneer Support arms: 6 units Suction cups: 18 units Lifting rails: 4 units Number of vacuum pumps: 1 unit Vacuum pump capacity: 250 m³/h Field changeover: yes Safety fence left: yes Safety fence right: yes Safety fence rear: yes Extraction hood: axis-controlled Setup aid: point laser setup aid Safety device: bumper Central lubrication: automatic Tools: available at extra cost Approx. weight: 6,500 kg Extraction diameter: 200 mm Ncodox Rdmcopfx Aglel Further descriptions and photos upon request Storage location:

Kondisi: bekas, Working area: 2,600 x 1,250 mm X-axis: 2,700 mm Y-axis: 1,600 mm Z-axis: 250 mm Spindle motor: 7.5 kW Feed rate: max. 38 m/min Video: available on request CNC machining center SCM Routech R 3000 for processing panel materials with automatic loading (vacuum destacker) and outfeed. Special price for self-dismantling and self-collection. Nedpjn A Dwgofx Agljcl

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER - Gantry design Movable table (workpiece), static working head - Horizontal workpiece table Ncodpedh Tf Usfx Agljl Control system with Biesse Works software Safety enclosure for the working head - Safety tread mats No. 1 infeed conveyor table (with transport belts) left No. 2 pneumatically controlled workpiece clamps within working area No. 1 outfeed conveyor table (with transport belts) right Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 x 60 Total connected load (kW): 20 WORKING UNITS (TOP): - No. 1 electrospindle with HSK D-50 adapter (power: 4.8 HP) with static frequency converter - No. 1 grooving saw (fixed direction X), diameter 150 mm, power 2.3 HP, with static frequency converter (inverter) - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 X-direction, 2 in negative Y-direction) WORKING UNITS (BOTTOM): - No. 1 electrospindle with HSK D-50 adapter (power: 4.8 HP) with static frequency converter - No. 1 grooving saw (fixed direction X), diameter 150 mm, power 2.3 HP, with static frequency converter (inverter) - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 X-direction, 2 in negative Y-direction)

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Ncodpfx Agowb Allslol Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Kondisi: sangat baik (bekas), CNC flexible automatic through-feed drilling machine (gantry machine) with dowel insertion system Moving panel (workpiece), moving working head (horizontal panel-workpiece) Control: PowerControl, Software: WoodWOP Integrated machine safety enclosure Workpiece drive via 3 conveyor belts Ncjdpfx Agod Nvi Delel Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X - Y - Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS (TOP): Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 38 + 3 special Independent horizontal drilling spindles (qty.): 6 Grooving saw unit (for machining in X-axis), blade diameter (mm): 100 Vertical main spindle (milling unit), qty.: 1 x SK 30 (vertical main spindle power: 6 kW) Automatic tool change system, disc tool changer, qty.: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty.): 2 Horizontal drilling spindles – right side (qty.): 13 + left side (qty.): 13 Injection nozzles for glue application and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty.): 1

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving plate (workpiece), stationary working head – horizontal plate (workpiece) PowerControl control unit (woodWOP software) Nsdpfolkdpmsx Aglocl Safety enclosure for the working head No. 2 safety interlock workpiece clamping jaws within the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamping grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 2500 x 1000 (optional 1300) x 80 mm (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) With separate electrical and control cabinet WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW) WORKING UNITS (BOTTOM): No. 23 independent vertical drilling spindles (drilling head output 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (swivels 90° in X-Y direction), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle power 6 kW)

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable working head – Vertical table (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers to secure workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Nedpfx Agoihfiislocl Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinets Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Motor power for drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) qty.: 1 Power of vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Carousel magazine, 10 tool positions

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), static working head – horizontal table (workpiece) Control: Xilog Plus 2 (Xilog Plus 2 software) Safety enclosure for the working head. With separate electrical and control cabinet No. 2 safety interlock workpiece clamping chucks within the working area With automatic panel pusher Infeed table (with conveyor belt) – outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z): 250 x 70 x 10 mm (2 x 5 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1300 x 80 mm (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Power of vertical main spindle: 7.5 kW Nsdpfx Agsfz I Ufslscl WORKING UNITS (BOTTOM): No. 48 independent vertical drilling spindles No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit) Power of vertical main spindle: 7.5 kW Glue injection nozzles and dowel insertion. Dowel magazine for automatic dowel feeding.

Kondisi: bekas, nomor mesin/kendaraan: 008370, arbeitsbereich_achsen_technische_daten Nodpfx Aox A Tk Sjglscl

Kondisi: bekas, nomor mesin/kendaraan: 007826, Working Area X-Axis: 5600 mm Working Area Y-Axis: 1200 mm Working Table: With Vacuum Console Supports Main Spindle Power: 12 kW Number of Controlled Axes: 4 Axes Maximum Edge Height: 60 mm Nedpfx Agjwgkt Ujljcl Number of Drilling Spindles: 17 Number of Tool Positions: 12

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation Ncedod Hz Nijpfx Aglol • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, SCM Morbidelli X 400-1531 Area kerja X: 3100 mm Area kerja Y: 1500 mm Area kerja Z: 180 mm Kepala bor dengan inverter Grup putar otomatis 0-90 derajat untuk pemotong cakram Grup 5 sumbu, 13,5 kW Kepala penyedot debu CNC untuk spindle utama 5 sumbu Magasin pergantian alat FAST14 (15xx) dengan 14 posisi Perangkat lunak pemrograman Maestro CNC Mesin pelabel Pompa vakum Ncsdpfx Agox Ivp Deljl

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Alberti Format 90 CNC machining centre dijual! Spesifikasi teknis Area kerja: 3000 x 1250 mm Ketebalan panel maksimum: 50 mm Kecepatan sumbu X maksimum terprogram: 40 m/menit, sumbu Y: 40 m/menit, sumbu Z: 9 m/menit Daya motor spindle: 2 x 2 HP - 3000 rpm 27 spindle vertikal independen dengan jarak 32 mm Dapat dipasang 4 router dengan Morse taper Nedpfxex Ey Sdo Aglecl Kecepatan dan tenaga router: 18000 rpm Mungkinkan pemasangan 1 gergaji Kecepatan dan tenaga gergaji: 12000 rpm Tekanan kerja: 6 bar Berat total: 4450 kg Dimensi termasuk lemari listrik: 5800 x 3450 x 1950 mm

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine!! List price: €52,742 net Machine frame, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact panel and base frame, with adjustable machine feet. Milling bed as sacrificial board made from 19 mm MDF. Table openings longitudinal and transverse, pre-configured. Mechanical set consisting of profile guides including profile guide carriages, ball screw and precision rack and pinion. All components assembled, pre-lubricated, including trial run, immediately operational. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, pre-assembled within the control cabinet, as well as sensors for each axis. Switching relay for automatic activation of the existing extraction system. Brush seals as dust protection and safety devices in compliance with CE through a traversing extraction device and a single-sided laser scanner for working area detection, with 275° and 5.5 m field coverage. (Machine positioned in a corner of the room) Handheld control panel with all necessary functions for machine operation, including emergency stop button and dead man's switch. Tool length sensor for determining tool length and changing the active zero offset. High-frequency spindle with 2.2 kW, including collet nut, frequency converter, mains filter, braking resistor, and collet set. Monitor as built-in monitor, including mini PC with Windows 10 and Beamicon2 control software, as well as mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documents will be sent via email prior to delivery. Vacuum table: Milling table designed as a vacuum table, consisting of four individually adjustable segments. Cross table made from PE with a cover plate made from ... Vacuum pump from Becker, with a capacity of 100 m³/h, oil-lubricated. For the electrical connection, a 16 amp, 400 V plug is required for the vacuum pump. The customer must provide HDF 3 mm plain on both sides for the entire vacuum table (2500 x 1300 mm) as a sacrificial plate. (Recommended use: processing coated chipboard panels) Ncodpfow Tfy Uox Aglol Tool set in Systainer: Tool set in Systainer consisting of: 1 pc. 1.5 mm left (HF152LIVHM) 1 pc. 3.175 mm 30° (HF30GVHM) 1 pc. 6 mm 90° (HF90GVHM) 5 pcs. 4 mm Z2 (HF41REVHM) 1 pc. 5 mm Z2 (HF52REVHM) 1 pc. 5 mm Z3 (HF53SRECAR) 2 pcs. 5 mm Z2 (HF52REDIA) 1 pc. 5 mm Z2 (HF52UPDOWN) 1 pc. 4 mm Z3 (HF43REVHM) 1 pc. 6 mm Z1 (HF61REVHM) 1 pc. 8 mm Z2 (HF82LAVHM) 1 pc. 10 mm Z2 (HF10SVHM) 1 pc. 12 mm Z2 (HF12SVHM) Maintenance kit in Systainer: Grease gun 150 ml, one cartridge high-performance grease 400 g, spray can silicone spray grease 500 ml, one grease nipple with hose section, and 30 mm face milling cutter with indexable inserts. Pneumatic unit: consisting of four cylinders, throttle check valve, push-in fitting, angle push-in fitting, silencer connectors, filter regulator, L-distributor, PE hose and brackets, for use in a pre-configured table opening (for end-face machining). If pneumatics are required for both table openings, the position must be calculated twice. (NOTE: Compressor must be supplied by the customer) Technical data: Travel: (X / Y) 2500 x 1300 mm, Z = 200 mm Dimensions: (L / W) 3800 x 2300 mm, H = 1900 mm (working area: 1980 mm) Required space: approx. 20 m² (minimum installation footprint) Weight: 1,500 kg Rated voltage: 400 V Repeatability:

Kondisi: bekas, nomor mesin/kendaraan: 008321, arbeitsbereich_achse Ncedpfx Aex A Tdleglol