Beli pemanas & kipas bekas (279)

Kondisi: bekas, Heating fan, heater, heat exchanger, air heater, air warmer, duct air heater, duct-type air heater, heating coil - Delivery: as-is condition as inspected - Fan motor: missing Ibodpfovrdr Nsx Aahof - Manufacturer: Kampmann, air heater heat exchanger - Type: Tip 5000 - Output: kW - Fan: missing - Operating pressure: max 10 bar - Dimensions: 800/710/H740 mm - Weight: 27 kg

Kondisi: bekas, Unit Tempering, Unit Tempering Cair, Unit Tempering Industri, Thermolator, Tool-Temp TT134, Mesin Bekas Ibodjx Emd Tspfx Aahjf Produsen: Tool-Temp Tipe: TT 134 Dimensi keseluruhan: 390 x 1030 x 1070 mm Tahun: 2012 Fitur: - Sistem kontrol mandiri (mikroprosesor) - Sistem pembuangan otomatis - Pemantauan dan indikasi suhu - Pengisian air otomatis - Kontrol suhu jarak jauh dan internal - Ventilasi udara otomatis - Pengoperasian dengan media air dan oli Suhu Maks.: 140 °C | 18–24 kW Pendinginan: 50.000 kcal/jam Tekanan pompa maks.: 4 bar | 100 l/menit

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. Ibjdpevz Hq Tsfx Aahjf - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: sangat baik (bekas),

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: belum diuji, daya: 1.500 kW (2.039,43 hp), daya panas nominal: 3.000 kW (4.078,86 hp), kapasitas pemanasan: 3.000 kW (4.078,86 hp), Dijual teknologi boiler lengkap dengan 2 unit boiler ELBH beserta silo untuk biomassa (serpihan kayu). Ibodpfxjx Idkpe Aahof

Kondisi: baik (bekas), ApenGroup-LRP28DE-Gaswarmlufterzeuger Isdpfxex Ihlke Aahsbf

Kondisi: baik (bekas), Heating blower, electric heater, heater, electric air heater, electric heating blower, heat exchanger, air heater, air warmer, duct air heater, duct air warmer -JEVi .: 21023007 -Type: EFFK -Power: 30 kW -Voltage: 3 x 476 V Ijdpfx Aasfixa Eohjbf -Dimensions: 460/350/H565 mm -Weight: 29 kg

Kondisi: baru, Tahun pembuatan: 1988, For sale: Mobile industrial fan from the GDR era, manufactured by VEB MAW Armaturenwerk Wehrsdorf (Zittau), powered by a 0.75 kW motor from the USSR. Robust steel construction on wheels – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1,020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Air density: 1.20 kg/m³ • Speed: 2,800 rpm • Power requirement: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not precisely determined – likely 1980–1990 Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2,820 rpm • Voltage: 220/380 V Iodpeud R Iiefx Aahsbf • Protection class: IP54 • Country of origin: USSR Advantages: • Compact and mobile design • Drive unit is functional and ready for operation • Suitable for workshops, paint shops, ventilation systems, and burner applications

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 Ibsdsvz Hq Hjpfx Aahof The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: sangat baik (bekas), Viessmann Vitoplex boiler 150kW (0069) oil burner Ibjdpfx Asx Htirsahof

Kondisi: baik (bekas), REZNOR UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Efficient to the Core The UDSA gas warm air heater is the most well-known unit from REZNOR, ensuring uniform air distribution in industrial halls. The recirculating air unit, easy to install, is available in 14 output sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. Combustion air can be drawn either from outdoors (as standard) or from the installation space. The REZNOR UDSA warm air unit guarantees even air distribution throughout the heated hall. Its patented heat exchanger sets new standards in airflow dynamics and heat transfer, delivering an efficiency of over 92%. UDSA: compact, revolutionary, and trend-setting. This unit generation allows for particularly economical direct heating of halls – without a central heating system – using decentralised, modulating gas-fired warm air heaters. REZNOR UDSA Gas Warm Air Heater. The Advantages: - Efficiency of more than 92% - Suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - With CE system certification, types B and C - Compact design for easy installation - Uniform heat distribution - Standard with vertical and horizontal air control louvres - Modulation of heating capacity down to 50% - EC technology - ErP Ready These units are directly fired gas warm air heaters (WLE) with fan-assisted atmospheric multi-gas burners. Ibsdpfx Asx Ihiioahof Installation, as well as the gas and flue connection, may only be carried out by an authorised installation company. The gas WLE units are suitable for: - Natural gas or LPG operation - Recirculating air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Single-stage or two-stage heating operation*, control via room thermostat and heating mode selector switch - Ventilation° control via ECOtronic TN-L° with day/night/week program - Flue gas discharge via roof, type B or C ° - Flue gas discharge through external wall, type C ° Gas WLE Type: UDSA015-4 Gas Appliance Category: B22P-C12-C32-C52-C62-C82 Specification: DE Gas Category: I2ELL Gas Type: G20 natural gas Connection Pressure: 20 mbar Injector Pressure: 7.80 mbar Max. Rated Heat Input (Hs) QN: 17.60 kW Max. Rated Heat Input (Hi) QN: 15.86 kW Max. Rated Heat Output: 14.59 kW Min. Rated Heat Output: Supply Voltage: 230V 1N, 50Hz Air Flow Rate: 1360 m3/h Protection Class: IP20 More items – new and used – can be found in our shop! International shipping costs on request!

Kondisi: baik (bekas), Ventilation system, comfort compact ventilation - Air flow rate: 6,000 m³/h Ijdpfxjb A Hxmo Aahsbf - Motor power: 1.85 kW - Dimensions: 1950 x 1100 x H1200 mm - Weight: 260 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation Ibodpfsvz Hqyjx Aahsf - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: sangat baik (bekas), Viessmann Paromat Triplex 460 kW boiler suhu rendah, dapat digunakan dengan pembakar minyak atau gas. Isdpfx Aaex Htifjhebf

Kondisi: baik (bekas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Exceptionally Efficient Performance The UDSA gas warm air heater from REZNOR is the company’s most renowned device, designed to ensure uniform air distribution in industrial halls. This easy-to-install recirculating unit is available in 14 output sizes from 7 to 97 kW, comprising a heat exchanger, gas burner, and flue gas fan. Combustion air can be drawn either from outside as standard or from the installation space. The REZNOR UDSA warm air heater guarantees even heat distribution throughout the heated hall. Its patented heat exchanger sets new benchmarks for flow dynamics and heat transfer, delivering an efficiency of over 92 percent. UDSA: compact, revolutionary, and forward-thinking. This generation of devices allows for highly economical direct heating of halls—without a central heating system—by using decentrally arranged, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. The benefits: - Efficiency over 92% - Suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - CE System certification, version B or C - Compact design for simple installation - Uniform heat distribution - Standard vertical and horizontal air deflection fins - Modulating output down to 50% - EC technology - ErP ready These units are directly fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. Installation and all gas and exhaust connections must be carried out exclusively by certified installation companies. These gas hot air units are suitable for: - Natural gas or LPG operation - Recirculating air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - 1-stage or 2-stage* heating operation via room thermostat and heating mode switch - Ventilation° controlled via ECOtronic TN-L° with day-night-week program - Roof flue discharge, version B or C° - Wall exit for flue gases, version C° Gas Warm Air Heater Type: UDSA025-3 Gas Appliance Type: B22P-C12-C32-C52-C62 Designation: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 8.20 mbar Max. Rated Heat Input (Hs) QN: 30.08 kW Max. Rated Heat Input (Hi) QN: 27.75 kW Ijdex Ihg Iepfx Aahsbf Max. Rated Heat Output: 25.53 kW Min. Rated Heat Output: Supply Voltage: 230V 1N, 50Hz Air Volume Flow: 2,385 m³/h Protection Class: IP20 See our shop for more new and used items! International shipping costs on request!

Kondisi: sangat baik (bekas), Gas and oil burners, oil burner filter, heating oil filter, filter and deaerator unit, heating oil deaerator -Manufacturer: Oilon, filter and deaerator unit unused in original packaging -Type: Oilon Plus -Technical data: see photo of nameplate Ibsdemiqmrjpfx Aahsf -Carton dimensions: 370/180/H150 mm -Weight: 1.8 kg

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm Isdpfx Asvz Hqteahobf - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: sangat baik (bekas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Efficient Even at Peak Loads The best-known unit from REZNOR is the UDSA gas warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 performance classes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be supplied either from outdoors (as standard) or from the building space. The UDSA warm air heater from REZNOR provides uniform air distribution throughout the heated hall. Its patented heat exchanger sets new benchmarks in airflow management and heat transfer, ensuring an efficiency of over 92%. UDSA: compact, revolutionary, and trend-setting. This generation of units allows economical, direct heating of halls—i.e., without a central heating system—using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas Warm Air Heater. The Advantages: - Efficiency of more than 92% - Suitable for vertical installation - Low NOx emissions - Innovative combustion concept - Quiet operation - With CE system certification, type B or C version - Compact design for easy installation - Even heat distribution - Standard vertical and horizontal air guide louvres - Modulating heating output down to 50% - EC technology - ErP Ready These units are directly heated gas warm air heaters (WLE) with fan-supported atmospheric multi-gas burners. Installation and connection to gas and exhaust systems must be carried out only by authorized installation companies. The gas warm air heaters (WLE) are suitable for: - Operation with natural gas or LPG - Recirculation mode - Inlet air temperatures below 5°C with stainless steel heat exchanger * - Single or two-stage heating operation* controlled via room thermostat and control switch - Ventilation° Control via ECOtronic TN-L° with day/night/weekly program - Exhaust discharge through the roof, version B or C ° - Exhaust discharge through the outer wall, version C ° Gas WLE Type: UDSA025-4E Gas Appliance Types: B22P-C12-C32-C52-C62-C82 Specification: DE Gas category: I2ELL Gas type: G20 Natural gas Supply pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. nominal heat output: 25.53 kW Min. nominal heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 2385 m3/h Protection class: IP20 Isdpjx Ig Ttefx Aahebf Additional new and used items are available in our shop! International shipping costs on request!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Heat exchanger - Application: Biogas plant; waste heat utilization Iodpeivqmdsfx Aahebf - Pipe diameter: DN160 - Temperature range: 0 °C to +90 °C - Example: - Water output: 12 m³/h, inlet temperature: 78°C, outlet temperature: 50°C - Slurry output: 10 m³/h, inlet temperature: 14°C, outlet temperature: 45°C - Dimensions: 5680/500/H2050 mm - Delivery time: 3–4 weeks

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. Isdpfx Aovz Hqmsahjbf All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Electric heat exchanger, swimming pool heater, heat exchanger - 400 VAC, 26.0 A - Pressure: max. 3 bar - Dimensions: 980/180/H180 mm Ibjdpfxjb A H S Ej Aahof - Weight: 3.1 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet Ibedpfx Aasvz Hqgehef The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, WTT-001 Ibedeghh Txepfx Aahjf

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal energy utilization solution for woodworking industrial and craft businesses. They have been designed for heating larger operational areas, such as workshop halls and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up periods and can heat the carpentry or joinery workshop, as well as other production facilities, in a very short time. Solid wood and its by-products serve as fuel material, e.g., remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree N°459 of July 24, 1996, and the safety guidelines of Directive 89/392/EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air delivery rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2 – 0.3 mbar - Flue draft at rated output: 0.18 mbar - Heatable volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm Iodpfx Aevz Hhxoahebf - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Required chimney draft: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet. The two pipe connectors for the outgoing hot air are located at the rear of the furnace in the lower section. A maximum of 20 meters of ductwork per connector is permitted for air distribution.

Kondisi: baik (bekas), Tahun pembuatan: 1981, Heater, burner, gas burner Ibjdsb A Iy Dopfx Aahof -Gas type: natural gas, liquid -Gas connection: 20 mbar to 1000 mbar -Nominal thermal output: 3590 kW -Blower motor: 5.5 kW -Weight: 160 kg