Beli Mütek Map 750 bekas (4.800)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput Isdpfxsdwktko Am Rsau - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2023, en-001 Iaedped N Dnhjfx Am Reu

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Iaodpeffh Atjfx Am Reu Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Special price for trade show machine *Available by arrangement New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock, they only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor output: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Iasded Su Hxjpfx Am Rsu Height – 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compactor Press clamp cooling option: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Kondisi: baru, Tahun pembuatan: 2026, Extremely powerful industrial magnet for iron separation Special price €990 net (Shipping €14.90 net) *You can find the construction lengths in picture 2 The effective surface features a stainless steel end plate (material 1.4301). For installation, there are threaded holes on the rear side. *Handle available upon request The block magnet systems can be used at a maximum operating temperature of up to +100°C. The magnet surface should be cleaned regularly from the collected iron parts. Attraction distances for all types, e.g.: Iedpfx Aotqfhxsm Roau For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, "iron parts jump onto the magnet's gripping surface". Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For high separation reliability, the installation of several block magnets in a cascade arrangement is possible. Installation and safety instructions: When handling, already during unpacking and later during installation, ensure that no loose iron parts, such as tools or screws, are lying nearby. The magnetic force is so strong that painful injuries can occur if fingers are caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active surface.

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Iaedpfxowzarce Am Rou Diameter rotor: 260 mm, Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Tahun pembuatan: 2024, Kondisi: baru, Overview – Various Configuration Options *Not all items may be required: Optional: - Bale Breaker MHB starting from €24,990 net - Straw Mill MHZ starting from €7,980 net - Special Hopper €970 net - Cyclone from €3,750 net - Sheet Metal Silo demonstration unit with discharge (only sketched in the picture) *Optional, if feeding by wheel loader is desired Unit price net from €14,750 – demo unit - Dedusting Screw Conveyor – approx. 4 m length Four screens are mounted underneath for suction extraction. Net unit price from: €9,750 - Exhaust Components / Hoses flat rate €945 net - Control System for Complete Plant Net unit price: €2,750 - Demonstration Unit Extraction Device MMJET 160, with cleaning system Connection: 160 mm Fan 2.2 kW Airflow: 1850 m³/400 V Automatic compressed air cleaning Net unit price from: €6,950 - Baling Press B 400 Bale size approx. 400 x 400 x 800 mm (height adjustable) Up to 30 bales per hour at ±20 kg From €59,995 net * A reference installation (baling press) is located at postal code: 64579 Gernsheim Technical Data: Bale size (WxDxH): 400 x 400 x 800 mm (height adjustable on request) Bale weight ±20 kg (material-dependent) Performance: approx. 30 bales per hour Feed hopper capacity: approx. 0.7 m³ Min./max. level sensors in hopper Hydraulic pre-compactor Hydraulic pressing ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in pressing channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight: approx. 1,500 kg mütek baling presses / packaging machines are designed for producing bales from a wide variety of materials such as shredded miscanthus or elephant grass, wood chips, sawdust, and chopped straw. These machines feature robust construction, ensuring consistent quality during continuous operation. The baling press compacts material filled into the storage hopper by hydraulic pressure without the use of binding agents and packs the material into plastic bags. The material volume can be significantly reduced using the baling press. The volume reduction factor depends on the material. The maximum material moisture content must not exceed 18% ATRO. The hopper of the mütek baling press can be loaded automatically or manually and has a capacity of approx. 0.7 m³. Hoppers with higher volumes or with integrated extraction and filter systems as complete disposal units are also available. In addition to automatic feeding by deduster, mütek offers feeding by screw conveyors. For both options, automatic dedusting is possible. mütek baling presses are equipped with a control cabinet. In standard version, bale dimensions are (WxDxH): 400 x 400 x 800 mm. Height can be adjusted to customer requirements on request. Iodpeff Sbisfx Am Rsau Baling offers the following advantages: - Simple and safe storage - No loose dust - Minimization of storage space - Low transport volume *Raw Material Requirements: - Dry (max. 30% ATRO) - Maximum length 35 mm

Kondisi: baru, Tahun pembuatan: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide range of materials such as all types of residual wood, softwood, chipboard and fibreboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by a robust construction, ensuring consistent quality in continuous operation. We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a shipping company, and we will document the test with photos and videos. Machine Data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Iaodpfed Db N Isx Am Rju Throughput rate 1 - 5 hopper fillings / h, Hydraulically operated pusher, Screen perforation of choice (10 - 40mm), Extraction port Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta start • Automatic shutdown when rotor runs idle • Removable extraction chute • Speed 70 - 100 rpm for increased throughput • Intermittent control to avoid idle times • Performance-enhancing step control of hydraulic pusher • Robust guides for the hydraulic pusher Additional shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - The moisture content (a.d.) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Tahun pembuatan: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Customs tariff code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible edges Hydraulically operated pusher Screen perforation as required (10 - 40 mm) Extraction nozzle Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo clutch Standard features included: - automatic star-delta starting - high-speed hydraulics - automatic stop if rotor idles - Speed: 70-90 rpm for high throughput - Pulse control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, chipboard, MDF panels and other materials (subject to trial and approval by the manufacturer) . Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ±100 mm Iajdpfjd Dgw Uox Am Rju - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop each synchronized with the shredder) . Raw material requirements: - Moisture content (dry matter) must be below 30% - Installation temperature: temperature-controlled room at at least +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times Iodpfsd E R D Sox Am Roau - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2024, en-1 Iaedpfx Amjd Hkqho Rsu

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Isdpfx Amod Nnwlo Rjau Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Tahun pembuatan: 2025, Kondisi: baru, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for post-shredding of wood chips. Further details can be provided after testing with your specific material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for various size-reduction applications. For example, in injection molding, rejects and sprues are produced that need to be reprocessed. In blow molding, in addition to rejects, there are parisons or start-up waste. The system can process blow molding materials such as PET bottles, PE/PP bottles, canisters, buckets, pipes, and more. Material is fed from above via a hopper into the cutting chamber of the granulator. Inside, a rotor equipped with cutting knives shreds the material between the rotating knives and the stationary counter-knives mounted in the chamber until it passes as regrind through the screen located below the rotor. *Option: The ground material is usually transported pneumatically into big bags, silos, or other containers. The price applies only to the shredding plant as shown in image 1 - fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger systems available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding PE 1000 plastic Input material: approx. 40 mm chip length Post-shredding to approx. 6 mm Throughput up to 50 kg/h with 6 mm screen (Throughput up to 80 kg/h with 8 mm screen) ___ For G30 wood chip post-shredding, much higher throughputs can be achieved: Up to a maximum of 400 kg/h with a 10 mm screen, *metered feed, e.g., via conveyor or auger. Further details after testing approx. 30 kg sample. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Suction connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm - additional screen sizes available Price per screen: €390 Price for replacement knife set: €679 Suitable for, for example: - All types of plastic waste Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Parts from injection molding, blow molding, sprue waste, small bottles, cables, small pipes, profiles, etc. --- Larger systems also available as an option: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm Ijdpfxsd N Dn Do Am Rsau *Optional with matching extraction/transport system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optional with matching extraction/transport system --- For system design, the following information is important: - Length x width x height of the input material? - Screen size: what final particle size (mm) is required? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos can also be helpful.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, translate-001 Iaedpfxedv Eu Hj Am Rou

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Iajdpegmfa Ajfx Am Rou Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: bekas, mgz1330-en Iedpfjx Tfdhex Am Reau

Kondisi: bekas, Tahun pembuatan: 2010, translation-001 Iaedpfx Asxq R E Njm Reu

Tahun pembuatan: 2013, Kondisi: hampir baru (bekas), This ploughshare mixer / inclined blade mixer is a customer return with zero operating hours. Before delivery, the mixer will be serviced and overhauled in the workshop. Machine designation: Ploughshare Mixer / Inclined Blade Mixer Ijdjn Ur S Uopfx Am Rjau Manufacturer: MAP Model: WBHP 15000 Year of manufacture: 2013 Operating hours: Zero Material: Standard steel S235J Drive motor: Choice of 160 kW, 200 kW, or 250 kW Type: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 – 10,500 liters Tool configuration: Ploughshares (bolted) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: 8,000 kg Technical documentation: Yes Remarks: Since the tools are bolted, the unit can be used as both a ploughshare mixer and an inclined blade mixer. This horizontal mixer is a customer return with zero operating hours. Prior to delivery, the mixer will be serviced and workshop-overhauled. Condition: As new and workshop overhauled Price: On request

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 0-250-08-1590, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.250 mm, jarak lintasan sumbu Y: 1.220 mm, jarak gerak sumbu Z: 125 mm, model controller: Homatic 2000 IPC, jumlah spindel: 28, kecepatan spindel (maks.): 24.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Iajdpszcda Sjfx Am Rou Control unit model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4 axes Console table 8 manually adjustable supports in X-axis 3 vacuum suction cups per console Vacuum connection for templates Laser positioning aid for suction cups Laser projection for cup positioning Liquid circulation cooling Operating terminal Note: Sale does not include the illustrated adapters, tools, or HSK tool holders.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 29.600 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.000 kN, diameter sekrup: 50 mm, jarak antara tiang: 530 mm, volume langkah: 412 cm³, tekanan injeksi: 1.820 batang, de-tech-20240629-01 Iaodpfx Aszavalem Rsu

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, berat keseluruhan: 350 kg, tinggi total: 1.020 mm, panjang total: 1.900 mm, lebar total: 1.200 mm, kapasitas angkut: 750 kg, Ember Produsen: WIFO-ANEMA BV Tipe: Ember Hidraulik Attachmen Forklift Ho 750 Tahun pembuatan: 2000 Tinggi (mm): 1.020 Panjang (mm): 1.900 Kapasitas angkat (kg): 750 Iaodszd Hu Tepfx Am Rou Berat (kg): 350 Lebar (mm): 1.200

Kondisi: sangat baik (bekas), Tahun pembuatan: 2026, tinggi pusat: 750 mm, panjang total: 4.200 mm, tinggi total: 2.800 mm, lebar total: 2.300 mm, berat keseluruhan: 13.000 kg, panjang pemakanan sumbu X: 360 mm, panjang umpan sumbu Y: 800 mm, daya: 28 kW (38,07 hp), Mesin Pembentuk LEIFELD - PNC 750 MACH-ID 9651 Produsen: LEIFELD Tipe: PNC 750 Kontrol: BECKHOF PAULI Tahun Pembuatan: 2026 Diperbarui pada tahun 2026 Kontrol baru PLC baru – SIEMENS Daya terpasang: 28 kW Penutup teleskop baja Rumah pelindung CE dengan pintu pengaman Opsional: Alat opsional untuk profil parabola hingga 1.200 mm Pemilik sebelumnya mengolah komponen aluminium dengan ketebalan material hingga 3 mm Iaedpozd Dlvefx Am Rju Komisioning, pelatihan, alat serta instalasi tersedia! Maks. diameter produk di atas meja: 1500 mm Tinggi pusat di atas meja: 750 mm Jarak antara kedua senter: 1225 mm Maks. ketebalan plat: 7 mm Langkah sumbu X: 360 mm Langkah sumbu Y: 800 mm Putaran: 100 - 1.000 Rpm Daya: 28 kW Kepala tailstock: 11DIN / Camlock Batang tailstock: 300 mm Panjang: 4.200 mm Lebar: 2.300 mm Tinggi: 2.800 mm Bobot: 13.000 kg Catatan: Informasi di halaman ini kami susun sebaik mungkin dan, jika memungkinkan, diperoleh dari produsen. Informasi diberikan dengan itikad baik, namun keakuratannya tidak dapat dijamin. Oleh karena itu, tidak merupakan pernyataan atau syarat kontraktual apa pun. Kami menyarankan untuk memeriksa semua detail penting secara mandiri.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 Iedpfx Ajzc Nwpom Rsau

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Dosing volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x470 mm Platen size: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional features: Iedpfxozc Nuhs Am Rsau Machine in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. 29,000 in automatic mode Total hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main motor – driven by a servomotor with inverter – energy-saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: bekas, druck-70-ausladung-750-abmessung-lochstanze-geka-puma-70-e-750 Iaodpfewrkcyox Am Rju