Beli Rel Rol Ringan, P: 1.200 Mm bekas (105.678)

Kondisi: baik (bekas), Data teknis untuk balok rak palet: Sistem rak: Dexion (Hovik) Tipe: P 90 Pengiriman meliputi: 01x Balok rak palet, bekas Warna material: putih Profil I: 100 x 50 mm Bracket: 5 HK Lebar bersih: 1.800 mm 02x Pen pin pengaman, bekas Jenis: galvanis sendzimir Untuk pengamanan lintel panjang Kontak person di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Permintaan pengiriman atau transportasi akan dikenai biaya tambahan sesuai lokasi dan volume pengiriman, yang dapat ditanyakan secara terpisah. Knjdpfx Acow R N Hyo Hea

Kondisi: baik (bekas), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery: 02x Workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Incl. cross and diagonal braces, base plates Uprights are pre-assembled (bolted lattice construction) 04x Workbench beams, used Colour: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm 08x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams Ksdpfoth N Shox Ac Hjna against accidental lifting Note: - Images are for illustrative purposes only. - Colours of materials may vary. - Workbench frames are picked/dispatched unassembled; - Bench uprights are pre-assembled; - Standard production time is about 3-5 working days. You may also purchase the workbenches from us in the following alternative depths: Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is available for collection only. If transport or shipping is required, this is subject to additional costs, which can be individually quoted depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Technical data for the steel beam: Manufacturer: Dexion Type: P90 Scope of delivery includes: Kedpfx Acow Eh Tio Hjna 01x Steel beam, used Material color: sendzimir galvanized Box profile: approx. 147 x 50 mm Clear span: approx. 4,060 mm End plate dimensions: approx. 192 x 50 mm Weight/piece: 33.34 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for self-collection only. Any further requested transport or shipment of this item will incur additional costs, which can be quoted separately depending on the delivery location and scope. Please contact us for details.

Kondisi: baik (bekas), Kontak person Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Knjdsx Huh Ajpfx Ac Hea Informasi umum tentang barang: Barang ini hanya ditawarkan untuk pengambilan di tempat. Jika pengiriman atau transportasi barang ini diinginkan, biaya tambahan akan dikenakan, yang dapat diinformasikan secara terpisah tergantung pada lokasi pengantaran atau cakupan pengiriman.

Kondisi: baik (bekas), Technical data for pallet racking system: Racking system: Dexion Type: P 90 Technical data for installation: Number of rack rows: 01 unit Length per rack row: 28,000 mm Number of bays per rack row: 09 units Number of levels incl. ground level: 04 units Scope of delivery: 10x Pallet rack uprights, used Material finish: Sendzimir galvanized Type: 100|25 Profile dimensions: 100 x 100 x 2.5 mm Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (bolted lattice frame) 6,000 mm high 1,100 mm deep 72x Pallet rack beams, used Material finish: orange I-profile: 120 x 50 mm Kedpfjwi N Naox Ac Hena Beam type: SLI 120 |14 S 350 Connector: 5 HK Clear span: 3,000 mm Max. load per pair of beams: 1,800 kg, with evenly distributed load. 144x Safety locking pins, used Material finish: Sendzimir galvanized For securing the beams against accidental lift-out 40x Anchor bolts, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x Shim plates, used Design: fully galvanized For levelling the rack uprights when placed on uneven floors 01x Load sign With information on bay & compartment load capacities, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. Any additional transport or shipping of this item will incur extra costs, which can be quoted separately depending on delivery location and scope.

Kondisi: baik (bekas), Technical Data for Pallet Racking Beams: Racking System: Dexion Type: P90 Scope of delivery includes: 01x Pallet racking beam, used Material finish: Sendzimir galvanized Box profile: 110 x 50 mm Beam type: SLB 110|15 Connector: 5 HK Clear span: 2,900 mm Max. load per pair of beams: 2,700 kg (with evenly distributed load) 02x Safety pins, used Material finish: Sendzimir galvanized For securing the cross beams against unintentional lifting Knjdpfx Aetpf Igec Hea Currently available in stock: 1,560 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any additional transportation or shipment of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope.

Kondisi: baik (bekas), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 Scope of delivery: 02x Workbench uprights, used Colour: green Upright height: 900 mm Upright depth: 600 mm Incl. cross and diagonal braces, base plates Uprights are pre-assembled (bolted lattice construction) 04x Workbench beams, used Colour: orange Beam profile: I: 120 x 50 mm Clear span: 3,000 mm 08x Locking pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting Note: - Images are for illustrative purposes only. - Colours of materials may vary. - Workbench frames are picked/dispatched unassembled; - Bench uprights are pre-assembled; - Standard production time is about 3-5 working days. You may also purchase the workbenches from us in the following alternative depths: Knjdpfx Acethi Hue Hsa Workbench frame 3,180 x 700 mm / 2 levels / (€184.00 incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (€186.00 incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (€188.00 incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (€190.00 incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (€192.00 incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (€194.00 incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (€198.00 incl. 19% VAT) Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding this item: This item is available for collection only. If transport or shipping is required, this is subject to additional costs, which can be individually quoted depending on the delivery location and scope of delivery.

Kondisi: baik (bekas), Data teknis untuk balok rak palet: Sistem rak: Dexion (Hovik) Tipe: P 90 Ruang lingkup pengiriman mencakup: 01x balok rak palet, bekas Warna material: putih Profil I: 100 x 50 mm Kaki kait: 5 HK Lebar bersih: 950 mm Kjdpfsw R Shaox Ac Hsna 02x pin pengaman, bekas Tipe: galvanis Sendzimir Untuk pengaman balok memanjang Kontak Anda di perusahaan kami: Bapak: Andre Evering Bapak: Mario Klöver Bapak: Falk Deutsch Informasi umum tentang produk: Produk ini hanya tersedia untuk penjemputan. Pengiriman tambahan atau pengiriman produk ini akan dikenakan biaya tambahan, yang dapat diminta secara terpisah sesuai lokasi dan jumlah pengiriman.

Kondisi: baik (bekas), Technical data for pallet rack beam: Racking system: Dexion Type: P 90 Scope of delivery includes: 01x pallet rack beam, used Material finish: Sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|15 Connector: 4 hooks Design: Header beam Clear span: 2,695 mm 02x locking pin, used Design: Sendzimir galvanized For securing the longitudinal beams Kjdpfjtiv H Hsx Ac Hjna Note: The beam was flush-cut at the connector to serve as a header beam. No information on compartment load can be provided. Currently in stock: approx. 148 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is only available for collection. If transport or shipping is desired, this will incur additional costs, which can be requested from us separately depending on the delivery location and quantity.

Kondisi: sangat baik (bekas), Technical data for the order picking rack: Racking system: Dexion Type: HI280 Installation technical data: Number of racking rows: 01 unit Rack length: approx. 1,340 mm Number of bays per row: 01 unit, each 1,290 mm Number of levels incl. ground level: 06 units Note: The advantage of a packing table or an order picking rack is that all the necessary tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x Upright frames, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm incl. cross and diagonal braces Weight per piece: approx. 5.50 kg The frames are pre-assembled 1,200 mm high 610 mm deep 06x Shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x Levelling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x Shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 units Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized Kjdpfxon Smvhs Ac Hena 48x Open front storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions (LxWxH): 500 x 156 x 143 mm Internal dimensions (LxW): 448 x 123 mm Weight per piece: approx. 0.785 kg 01x Load sign showing bay and shelf load capacities, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As these are used goods, damages, rust spots or similar defects may be present. General information about the item: This item is offered for collection only. Additional transport or shipping of this item can be arranged at extra cost, which can be quoted separately depending on delivery location and scope.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Knedpomhhypjfx Ac Hja

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Kjdemhh Dhspfx Ac Hena - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm Kedpfsmhhx Ijx Ac Hona - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Kjdpfx Acemhh Ans Hona - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Kodpfxoh Ek Das Ac Hjna Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Kodpfx Ajmhhf Ssc Hjna - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Knjdpfxemhhl Ho Ac Hsa Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany Knedpfxsmidyfe Ac Hja - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments Kodpfxsmkixwo Ac Hona - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Knjdpfxomhh Dto Ac Hoa - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, nomor mesin/kendaraan: DN-ELV3200KG, Derek Kranhimmel, Derek Jalur, Derek Jembatan, Derek Gudang, Derek Kapasitas beban / beban lengan 3,2 ton - 3.200 KG Lebar rel 13.600 mm, dimensi luar sekitar 13.800 mm Tahun pembuatan 2000 Tinggi pengangkatan 6 m Tinggi keseluruhan dari bagian atas derek hingga kait sekitar 1.050 mm Panjang balok kepala dengan bumper sekitar 2.450 mm Knsdpfozv Du Iox Ac Hsa Dilengkapi dengan kontrol lantai Derek dalam keadaan terlepas dan siap digunakan Kondisi sangat baik, lihat gambar Tersedia juga derek putar tiang dan derek putar dinding Sistem Demag KBK dan Abus HB, serta Errikla, Hadef, Stahl KT 2000, dll. Pengiriman melalui perusahaan ekspedisi dimungkinkan, silakan tanyakan berdasarkan kode pos Pengambilan langsung lebih disukai

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 241076.1, diameter rol: 50 mm, lebar rol: 700 mm, lebar total: 790 mm, tinggi total: 110 mm, panjang total: 2.185 mm, panjang pengangkutan: 2.185 mm, TAF item number: 241076.1 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,185 x 790 x 110 mm (LxWxH) Side frame width: 790 mm Side frame height: 100 mm Kodpfet Tx Sisx Ac Hona Conveyor length: 2,800 mm Conveyor width: 700 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 120 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully operational Function test: OK

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter rol: 14 mm, lebar rol: 500 mm, lebar total: 580 mm, tinggi total: 110 mm, panjang total: 2.500 mm, panjang pengangkutan: 2.500 mm, Nomor artikel TAF: 1000003796 Produsen: tidak diketahui Tahun pembuatan: tidak diketahui Dimensi total: kira-kira 2.500 x 580 x 110 mm (PxLxT) Lebar sisi rangka: 40 mm Tinggi sisi rangka: 100 mm Panjang konveyor: 2.500 mm Lebar konveyor: 500 mm Knedsuq Hxfepfx Ac Hoa Tipe rol: Baja Jumlah rol per poros: 5 buah Jarak antar rol: 50 mm Diameter rol: 14 mm Penggerak: Gravitasi Kondisi: Bekas / berfungsi penuh Tes fungsi: OK

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, kapasitas angkut: 1.200 kg, tinggi angkat: 6.500 mm, tinggi konstruksi: 3.000 mm, jam operasional: 1.874 h, jenis bahan bakar: listrik, tipe tiang: triplex, Pabrikan + model: JUNGHEINRICH EKS 312 Tiang: P + F - 3F6500 ID: 25116.5772 Kategori: Bekas Tiang: 3F Tinggi terendah: 3000 mm Tinggi angkat: 6500 mm Knjdpfx Ajzutltoc Hsa Kapasitas: 1200 kg / 600 kg Tinggi platform: 6500 mm Tinggi pengambilan: 8100 mm Lebar kabin: 1400 mm Tahun: 2019 Jam operasi: 1874 jam Kapasitas aki: 48 V / 620 Ah Opsi: - Tiang Triplex - FFL - PLATFORM KHUSUS !!!! (P x L = 2000 x 1400 mm !!) - ROL PENUNTUN pada gerbang keamanan, KONDISI SEPERTI BARU !!

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, panjang sabuk konveyor: 760 mm, lebar sabuk konveyor: 580 mm, kecepatan sabuk konveyor: 600 mm/dtk, panjang total: 760 mm, lebar total: 700 mm, tinggi total: 150 mm, berat keseluruhan: 23 kg, produsen motor: Interroll, Produsen: Heber Tahun pembuatan: 2016 Dimensi keseluruhan (P x L x T) dalam mm: 760 x 700 x 150 Lebar inkl. dinding samping dalam mm: 700 Knedpozd A Euefx Ac Hsa Lebar inkl. penggerak dalam mm: 700 Tinggi dinding samping dalam mm: 140 Panjang pengangkut dalam mm: 760 Lebar pengangkut dalam mm: 640 Jenis sabuk: Plastik, elastis Lebar sabuk dalam mm: 580 Permukaan geser: roller pendukung Jarak antar roller dalam mm: 160 Jenis poros roller pendukung: Baja - ulir bagian dalam Diameter roller pendukung dalam mm: 50 Jumlah roller pendukung per poros: 1 Material roller pendukung: Baja Penggerak: Rollerdrive - motor roller Produsen motor: Interroll Data motor: EC310 Kecepatan pengangkut dalam m/s: 0,6 Berat bersih dalam kg: 23 Kondisi: bekas / berfungsi penuh Tes fungsi: OK