Beli Nimo-Kg Sk800Mk bekas (70.715)

Kondisi: baru, Tahun pembuatan: 2025, Blast container with crane flap and reinforced floor. 8.89 x 2.35 x 2.69 m, suitable for all standard blasting media such as chilled iron grit, corundum, garnet sand, glass beads, ceramic balls, etc. Containerized blasting systems with built-in machine room. Flat conveyor floor, screw conveyor floor, bucket elevator, media preparation, vibrating screen, magnetic drawer, drum magnetic separator, 100l pressure blast pot, filter unit, vacuum extraction floor, convertible opening for manual blasting cabin. LED and emergency lighting. Cartridge filter system and suspended dust filter. For questions regarding technical specifications, please contact us in writing or by phone. The basis for these machines is our manufacturing site in Grossenlüder, established in 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts. Images may show optional accessories. Nlsdpfjfnh Rwjx Aivog

Kondisi: baru, Tahun pembuatan: 2025, Centrifugal Wheel System, Overhead Track Type 1.15 2T Njdpfx Asdrr U Seivelg Usable space: Diameter = 1000 mm, Height = 1500 mm. Load capacity: 500 kg. Equipped with 2 centrifugal wheels, each 7.5 kW, including filtration system and suspended dust filter. For technical specifications or any further questions, please contact us in writing or by phone. The machine is based on manufacturing at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the well-known long-standing contacts.

Kondisi: baru, Tahun pembuatan: 2025, Blast room 12x5 m with blasting trolley and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reconditioning unit, material bunker, abrasive replenishment system, free-jet pressure blower, filter unit with automatic cleaning. Walls lined with 4 mm fabric-reinforced rubber. Nljdpfx Asdhlikeiveg For questions regarding technical specifications, please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their longstanding, well-known contacts.

Kondisi: baru, Tahun pembuatan: 2025, Instalasi sandblasting kontainer. 5,89 x 2,35 x 2,69 m. Instalasi sandblasting kontainer dengan ruang mesin terintegrasi. Lantai konveyor datar, lantai konveyor sekrup, elevator ember, sistem daur ulang, tangki sandblasting tekanan 100l, sistem filter, lantai penyedotan, bukaan sebagai kabin sandblasting manual. Untuk pertanyaan mengenai spesifikasi teknis dan lain sebagainya, silakan hubungi kami secara tertulis atau melalui telepon. Mesin diproduksi di lokasi Grossenlüder sejak 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG dengan kontak terpercaya bertahun-tahun. Gambar dapat menunjukkan perlengkapan opsional. Nledpfx Aedkbvcsivsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 150.050 h, Fungsionalitas: berfungsi sepenuhnya, produsen pengendali: Heidenhain, model controller: iTNC530, diameter meja putar: 500 mm, berat keseluruhan: 13.000 kg, kecepatan spindel (maks.): 14.000 rpm, jam operasional spindle: 6.950 h, pasokan pendingin: 20 batang, hidung spindel: HSK 63, jumlah slot dalam magazin alat: 60, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, pemisah kabut oli, • Kondisi: Kondisi sangat baik • Jam Operasional: 6.950 • Meja Putar KESSLER, Ø 500 mm • Majalah Perkakas: 60 slot, HSK-A63 Njdpfx Aox Hg Ibjivslg • Pendingin internal: 20 bar, dengan sistem filter sabuk • Sistem pendingin: Pengawasan level cairan pendingin otomatis • Udara melalui spindel • Pengukuran perkakas: Sistem pengukuran perkakas laser BLUM • Pengukuran benda kerja: Pengujian benda kerja inframerah (sistem probe 3D), termasuk persiapan pengukuran benda kerja • Pengawasan tabrakan: Modul POS DCM • Penyaluran media: Penyaluran media 3 kanal di tengah meja • Pengamatan: Jendela pandang putar • Handwheel Silakan kirimkan permintaan langsung melalui situs web kami jika Anda tertarik dengan mesin ini. Karena alasan teknis, permintaan penawaran langsung melalui portal eksternal sulit dan hanya dapat dilakukan dengan penundaan.

Tahun pembuatan: 2008, Kondisi: baik (bekas), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial Number: 760001 Year of manufacture: 2008 Nlodpfx Aelrt Saeivsg Available immediately Ex works, to be dismantled by buyer Dismantling and loading can be offered as an option.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 8 mm, Sudut pembengkokan (maks.): 195 °, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for pipe diameters ranging from 15 to 100 mm, enabling the processing of complex geometries with standard bending radii of 2xD. Depending on material quality and wall thickness ratios, radii as tight as 1.5xD can also be reliably achieved in series production. The 120 mm tool height provides ample scope for special profiles. The highly precise and powerful electric drive of the bending axis, combined with the robust, rigid construction of both the mandrel holder and bending arm, ensures optimal bending results. Quick-change bending tools allow for rapid conversion to different pipe sizes. The clamping pressure for the pipe holder can be optimally adjusted. The PLC control (expandable via USB stick) comes with data storage and the latest X2X interface and can store virtually unlimited programs for bending angles, length dimensions, and rotation angles for up to 50 bending sequences per pipe length. An easily programmable database monitors springback values for up to 200 materials. The control has two operating modes: In 'Simple Bending', the length and twist of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is preloaded, and a continuous target/actual comparison is carried out during bending. Nodpfxonh R Sue Aivslg Also available with pneumatic rotary stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemicals industry • Hydraulic piping • Metalworking • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel holder lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600–3200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic minimal-quantity mandrel lubrication • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake function or via manual stops with foot switch • Semi-automatic length and rotation positioning via servomotors • Automatic tool retraction • Pipe calculation software • 10-inch touchscreen with integrated pipe calculation • Data transmission via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to trial production in our in-house demo room • Consultation and information meeting at your site • Consulting and handling of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, tekanan (maks.): 250 batang, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for complex geometries to perform right- and left-hand bends. Plug-in bending tools allow for quick changeovers to different tube sizes. A rapid hydraulic system to minimize non-productive times is an important factor for series production. The clamping pressure for the tube can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can accommodate an almost unlimited number of programs storing bending angles, lengths, and rotation angles for up to 50 bending sequences on a single tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine offers 2 operating modes: In 'Simple Bending', the length and rotation of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is pre-set and a continuous setpoint/actual comparison is performed during bending operations. This excludes mispositioning within a tolerance window, effectively minimizing operator errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically activated upon reaching the bending angle. The compact drive unit with removable mandrel support offers benefits for on-site assembly as well as for special constructions with very long tube in-feeds and is also available as a stationary version with a tool and mandrel bar organizing system. A cost-effective alternative to fully controlled CNC machines. POTENTIAL APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant construction, e.g. for the chemical industry • Metal fabrication • Prototype construction Technical Data: • Bending capacity Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10mm/140mm • Min. bending radii: 1.5 x Ø (Standard 2 x Ø) • Multifunction machine control with bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (longer versions available upon request) • Maximum 180º bending result • Weight 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for clamping force supervision • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: Nsdpfx Aong Exaoivslg • You are welcome to join us for test production at our in-house demo room • Consulting and informational meeting at your site • Consultation and handling of leasing/finance purchase via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an external diameter of 100 mm, both in stationary operation and directly at the installation site. Transport can be carried out using a pallet truck or with the optionally available rollers. A robust three-phase motor and precision gearbox ensure powerful drive performance. The machine stands out due to its compact and slim design as well as the exceptionally open bending area. Direct position detection on the bending axis guarantees optimal bending accuracy. Bending angle adjustment is quick and simple via a user-friendly, menu-driven interface available in 14 languages with touchscreen control, ensuring even more intuitive operation. Up to 100 bending programs can be stored for complex bending tasks, each supporting a sequence of up to 8 bends per geometry. The multifunctional control system allows variable adjustment of bending speed for forward and reverse motion, with a parameterizable overbending function to compensate for material springback. Nlsdpfxendk N Aj Aivjg Using the four material characteristic curves, the machine automatically overbends the material to the required angle, thus ensuring highly precise results. The “stationary tube and rotating tool” principle minimizes the machine’s footprint. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to make bends with minimal deformation, for example, in stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square, and round iron profiles can be bent with ease. The KBV small radius bending device attachment allows extremely tight bending radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Serpentine bending • Prototyping • Plumbing and heating installations • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii from 45 mm, incl. 40 mm hex shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small bending device • Special tools according to specifications • Software adaptations for special applications OUR SERVICE: • You are welcome to visit our demo room for test production • Consultation and information meeting at your site • Consulting and handling of lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 54 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 4 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, radius tekuk (min.): 9 mm, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software Nedpfjndn Agex Aivelg • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: 1018, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: manual, jenis aktuasi: listrik, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: Nedponfvy Usfx Aivolg • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg Nlodpfxsng Ax Ss Aivog OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of the compact and mobile horizontal bending machine focused specifically on producing dimensionally accurate spirals, such as handrails for spiral staircases. This represents the gold standard in bending, as two mutually dependent variables (radius and pitch) must combine in a single process to form a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and control via measuring devices with subsequent correction of bending values ensures perfectly accurate results. With minimal and simple input into the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new powerful drive concept allows variable adjustment of the bending speed and requires only a standard 230 V (single-phase AC connection). Choose between hardened steel tools and surface-friendly hard plastic tools. For optimum feed even with tight bending radii, all three bending shafts are powered. This drive system also proves itself in everyday heavy-duty use for flat work and for bending pipes and profiles. Customers of the bending systems 4800, 5000, and 6000 can purchase the roll bending unit separately without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 bending systems via the bending shaft. Here, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/lower rails for spiral staircases • Large-radius pipe and profile bends • General metal fabrication TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm with Ø 42.4 mm • Right and left bending direction • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function Nedpfsng A R Ssx Aivslg • Maintenance-free, robust three-phase motor • 230 V site-compatible connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller for stabilization • Lift roller for producing controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist measurement • MPW – PC calculation program for determining accurate bending values • RB4303 – Universal bending tool for profiles up to 60 mm height • Tools for custom profiles OUR ON-SITE SERVICE FOR YOU: • Test production demo available in our in-house showroom • Consultation and information session at your location • Leasing/financing options, advice and processing • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) Nlsdjnh R Ekopfx Aivog OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis aktuasi: listrik, Diameter pipa (maks.): 35 mm, Ketebalan dinding tabung (maks.): 2 mm, Sudut pembengkokan (maks.): 360 °, radius pembengkokan (maks.): 150 mm, radius tekuk (min.): 32 mm, berat keseluruhan: 28 kg, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both in the workshop and directly on-site, for tube diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive performance. The motor speed is automatically adjusted, allowing for faster reverse operation and reduced cycle times. Position detection directly on the bending axis delivers optimal bending accuracy and excellent repeatability. The bending angle can easily and quickly be set to 0.5° using push buttons. The large LCD display clearly shows the angles. Up to three bending angles can be saved, allowing efficient bending of tubes with varying requirements. For transport, the compact unit and accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube, rotating tool” principle minimizes space requirements during bending. When working with thin-walled tubes, sliding shoes are used to ensure wrinkle-free bending and to create curves with minimal deformation in, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square, and round bars can also be bent with ease. POSSIBLE APPLICATIONS: • Hydraulic tubing • Prototype construction • Plumbing and heating installation • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment 0.5° • Maximum 180° bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for rapid tool change • Safety foot switch with emergency stop function • 230 V AC connection • Weight 29 kg • Frequency converter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Small bending device KBV • Special tools on request OUR SERVICE: • Welcome to test production on-site in our demonstration area • Consultation and information meetings at your premises Nsdpfxjnfvx Ns Aivslg • Leasing/financing options available via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance available

Kondisi: baru, Tahun pembuatan: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vise. Operation is carried out via a screw-in handle. A lockable setting ring ensures repeatable bending accuracy. Tool exchange is exceptionally simple due to the plug-in system. The principle of “stationary pipe and rotating tool” allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, enabling the production of bends with minimal deformation, e.g. for stainless steel and copper pipes. The optional model with hexagonal drive facilitates not only use in a vise, but also allows the bending device to be powered by the 3000 and 6000 systems. For this, the KBV is simply mounted onto the machine’s bending shaft. POSSIBLE APPLICATION AREAS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limitation • Maximum bending angle of 180º Nljdpfx Aiong Amksvjg OPTIONAL ACCESSORIES: • KBV with hex drive for bending on model 3000 or 6000 • Machine case • Length stop OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our demo room • Consultation and information meeting at your premises • Consulting and processing of leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, maintenance on-site at your location

Kondisi: baru, TECHNICAL DATA: - Base area: 10,000 x 24,000 mm [other configurations available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 350 kg/m² - Colour: RAL of your choice - Condition: new The platforms are standardly expandable according to the specified grid. Other dimensions and heights available upon request. Our team will be happy to advise you! Scope of supply: - Columns - Main and secondary beams - Cross braces - Floor covering - Fastening material Sample prices: 30 m² | Area: 5,000 x 6,000 mm | €2,685.00 net, plus shipping and VAT 60 m² | Area: 5,000 x 12,000 mm | €4,785.00 net, plus shipping and VAT 90 m² | Area: 5,000 x 18,000 mm | €6,855.00 net, plus shipping and VAT 120 m² | Area: 5,000 x 24,000 mm | €8,955.00 net, plus shipping and VAT Nsdpfx Aisxpizaovjlg 60 m² | Area: 10,000 x 6,000 mm | €4,785.00 net, plus shipping and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,645.00 net, plus shipping and VAT 180 m² | Area: 10,000 x 18,000 mm | €12,495.00 net, plus shipping and VAT 240 m² | Area: 10,000 x 24,000 mm | €16,335.00 net, plus shipping and VAT Further configurations available. Please contact us for more information. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross braces available at extra charge YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your custom storage platform according to your specific requirements – tailored to area, load capacity, installation height, and intended field of application. Based on your specifications, our planning department will provide you with an individual, non-binding offer. Whether new construction, extension, or modernisation of existing systems – we support you with solid technical expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Shipping costs are based on the delivery location and consignment volume and can be quoted individually upon request. TERMS OF PAYMENT Payment terms will be agreed upon when placing an order. Prices are per unit/net prices or as specified in the description (plus VAT). Naturally, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage solutions, as well as machines for trade, industry, and the crafts sector. We constantly offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please feel free to contact us. ✅ Four-in-a-row – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, en-GB Nedpfx Aexpiztoivslg

Kondisi: baru, TECHNICAL DATA: - Footprint: 16,000 x 20,000 mm [other variants available] - Grid spacing: 4,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [adjustable] - Flooring: 38 mm particle board P6, raw/white - Load capacity: 500 kg - Colour: RAL colour of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Main and secondary beams - Cross-bracing - Flooring - Fastening materials PRICE examples: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport and VAT 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport and VAT Optional accessories: - Guard rail Njdpfx Aexpha Ieivjlg - Flush wall connection - Staircase - Transfer station - Collision protection - Diagonal supports instead of cross-bracing available at extra cost YOUR CONTACT PERSONS AT DLK: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL DESIGN & CUSTOM MANUFACTURING This platform system represents an example from our standard range. Naturally, we can design and manufacture your storage platform to precisely fit your operational requirements – tailored to area, load capacity, installation height, and intended application. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly. This item is available for collection. Delivery or shipping is available at extra cost. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually. TERMS OF PAYMENT To be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commercial, industrial and craft applications. ✅ Four success factors from DLK: Warehouse technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other variants available] - Grid pattern: 5,000 x 5,000 mm - Surface height: 3,340 mm above finished floor level - Clear height: 3,000 mm [adjustable] - Flooring: 38 mm chipboard, grade P6, raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: New Mezzanine platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Flooring - Fasteners Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus shipping and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus shipping and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus shipping and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus shipping and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus shipping and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus shipping and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus shipping and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus shipping and VAT 400 m² | Area: 20,000 x 20,000 mm | €28,155.00 net, plus shipping and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus shipping and VAT More variants available. Optional accessories: - Railings - Flush wall connection - Stairway - Transfer station - Impact protection - Diagonal braces instead of cross bracing (available at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we can design and manufacture your mezzanine platform precisely to your operational requirements – tailored to area, load capacity, platform height, and intended application. Our design department will prepare a custom, non-binding offer based on your specifications. Whether new build, extension, or modernization of existing systems – we support you with sound expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to help you with the transport and installation of the goods. The item is available for collection. Delivery or shipping is possible at extra cost. Additional costs depend on the destination and scope of delivery and can be requested from us individually. PAYMENT TERMS Nodpfoxpii Rex Aivelg Payment terms are to be agreed in case of order. The price is stated per unit/net price or as specified in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ✅ Four to win – The building blocks of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, TECHNICAL SPECIFICATIONS: - Footprint: 15,000 x 20,000 mm [other variants available] - Grid spacing: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm [adjustable] - Floor covering: 38 mm particle board P6 raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are modularly expandable according to the specified grid. Other sizes and heights available upon request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross braces - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus shipping costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus shipping costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus shipping costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus shipping costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus shipping costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus shipping costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus shipping costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus shipping costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus shipping costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus shipping costs and VAT Further variants available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Goods transfer station - Impact protection - Diagonal braces instead of cross braces (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at extra cost. The additional costs depend on the delivery location and the scope of the shipment – we will provide individual quotations upon request. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is understood as unit price/net price or as indicated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn specializes in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commercial, industrial and craft applications. Nlodpfx Aijxpic Reveg We continuously offer interesting used stock from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. Four-in-one – The DLK success modules: Warehouse Technology | Levelmaker® | Logistics | Solutions

Tahun pembuatan: 1992, Kondisi: bekas, Plate heat exchanger for milk processing Nledpfsh Eulgjx Aivjg

Tahun pembuatan: 2003, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 03234, Mesin descaling dengan 6 sikat (3 pasangan) untuk kawat baja ukuran maksimum 5,5 mm – 16,0 mm (karbon rendah). Pasangan sikat diatur dalam offset 60 derajat untuk efek maksimal. Mesin tampak sangat bersih. Disarankan untuk melihat dan inspeksi di lokasi. Nlsdex R Uzdepfx Aivog

Kondisi: bekas, Tahun pembuatan: 2022, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Kelas FEM: FEM 3 Kapasitas angkat forklift: 3.000–5.000 kg Panjang garpu: 1.350–2.350 mm RINCIAN MESIN Dimensi & Berat Nlodpfx Aiszz H Afevog Dimensi (P x L x T): 1.350 x 1.000 x 1.000 mm Berat sendiri: 200 kg Semua ukuran adalah angka yang dibulatkan. Tidak ada jaminan untuk kesalahan pengetikan atau pengukuran. Ketentuan Pengambilan: Pemuatan samping hingga 6 ton dapat dilakukan dengan forklift besar di lokasi. Pemuatan dilakukan atas risiko sendiri. Pemuatan dari belakang melalui landasan miring pada ketinggian truk 100–150 cm, hingga 15 ton dan lebar hingga 230 cm dapat dilakukan. Pengambilan hanya dimungkinkan setelah menerima konfirmasi pembayaran melalui email. Pengambilan tanpa pemberitahuan sebelumnya dari hari Senin hingga Jumat antara pukul 07:00 dan 16:00. Jika pengambilan tidak dilakukan tepat waktu, akan dikenakan biaya penyimpanan sebesar 20 € per mesin per hari. Biaya penyimpanan yang masih tertunggak harus dilunasi sepenuhnya sebelum pengambilan. Nomor lot: 1081

Kondisi: bekas, Tahun pembuatan: 2019, Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Kapasitas angkat: 5.000 kg Kelas FEM: FEM 3 Cocok untuk kapasitas angkat forklift: 3.000–5.000 kg Lebar bukaan bagian dalam: 70–940 mm Rentang putar: 360° Panjang garpu: 2.400 mm RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 2.400 x 1.350 x 1.000 mm Berat sendiri: 1.000 kg Asal mesin: Linde E50HL PERALATAN Katup ke-3, ke-4, dan ke-5 Nedpfx Aiszz Hzzevjlg Klem putar dengan fungsi putar 360° Pengatur posisi garpu Penggeser samping Garpu, panjang 2.400 mm Semua ukuran adalah angka yang dibulatkan. Tidak ada jaminan untuk kesalahan pengetikan dan pengukuran. Syarat pengambilan: Pemuatan samping hingga 6 ton dimungkinkan dengan forklift besar di lokasi. Pemuatan dilakukan dengan risiko pembeli. Pemuatan dari belakang melalui landasan pada ketinggian truk 100–150 cm, hingga 15 ton dan lebar hingga 230 cm dimungkinkan. Pengambilan hanya dimungkinkan setelah menerima konfirmasi pembayaran melalui email. Pengambilan tanpa pemberitahuan sebelumnya dari hari Senin hingga Jumat antara pukul 07.00 dan 16.00. Jika pengambilan tidak dilakukan tepat waktu, akan dikenakan biaya penyimpanan sebesar 20 € per mesin per hari. Semua biaya penyimpanan yang belum dibayar harus diselesaikan sepenuhnya sebelum pengambilan. Nomor lot: 1013