Beli Deckel Fp 6 bekas (676)

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site. Kfjdpfxsu R D I Sj Aahja

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), b849edbf Kfjdpfjxyk Upsx Aahja

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Deckel FP2 Aktiv mesin frais alat dengan 3-sumbu Heidenhain TNC 111 Aktiv digital display. Mesin dalam kondisi sangat baik, berasal dari departemen pelatihan pemerintah. Meja kaku, dudukan spindle SK 40, Aksesori: berbagai collet dan arbor cutter, penahan balik. Kondisi sangat baik dan siap pakai. Dapat didemonstrasikan di bawah tegangan sesuai kesepakatan. Kfodsxyhmvjpfx Aahja

Kondisi: baik (bekas), Tahun pembuatan: 1986, CNC universal milling machine Make: DECKEL Type: FP5NC Year: 1986 Control: DIALOG 4 Travel paths: X710mm Y600mm Z500mm Clamping table: 1000mm x 550mm Tool holder: SK40 Feed rate programmable: 2 ... 3600 mm/min Spindle speed: 18 ... 6300 rpm Spindle power: 7.5 kW Ksdpfsxr A A Aox Aahofa Machine in stock.

Kondisi: bekas, Universal-Marógép-DECKEL-FP1-2024-06 Kfsdpfxsxxpp Nj Aahsa

Kondisi: baik (bekas), Tahun pembuatan: 1998, The machine is dirty. Technical condition: good. Kfedpfx Asvptmksahoa Rotary and swivel table is installed.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 Kfodpfxsxu E R Io Aahja >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. The machine is immediately available.

Kondisi: bekas, Technical details: X-travel: 600 mm Y-travel: 300 mm Z-travel: 360 mm Speed range: max. horizontal: 40–2000 rpm Kfodpju U E T Iefx Aahja Spindle taper: vertical / horizontal: SK 40 / SK 40 Speed range: max. permissible: 40–2000 rpm Feed rate: 2–3600 mm/min Quill stroke: 80 mm Table size: 810 x 420 mm Total power requirement: 3 kVA Machine weight approx.: 1300 kg Dimensions (LxWxH): approx. 1.8 x 1.35 x 1.95 m Milling machine with slotting head Slotting stroke: 32–80 mm with 10 x double strokes, 24–285 strokes/min Heidenhain 3-axis digital readout *

Kondisi: baik (bekas), Tahun pembuatan: 1976, Mesin frais Deckel FP1, meja sudut tetap, dudukan spindle SK 40. Rem spindle. Aksesori: penahan lawan, berbagai collet penjepit. Dalam kondisi baik dan siap pakai. Dapat didemonstrasikan dengan listrik sesuai kesepakatan. Kfodpfx Aexw T Efjahoa

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Kfsdpfjwgdz Ejx Aahea x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Tahun pembuatan: 1987, Kondisi: siap digunakan (bekas), Verfahrweg X/Y/Z: 560mm/500mm/450mm, Werkzeugaufnahme: SK40, Drehzahl: 4000U/min, Vorschub: 3,6m/min, Eilgang: 4m/min, Tischdimensionen X/Y: 530mm/900mm, max. Tischbelastung: 450kg. Maschinendimensionen X/Y/Z: 2350mm/2200mm/2000mm, Gewicht: ca. 2200kg, Steuerung: Deckel Contour 2. Eine Besichtigung vor Ort ist möglich. Kfodexvddvopfx Aahsa

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Deckel FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Controller: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Controller: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Kfsdpfsxnniajx Aahoa Dimensions (LxWxH): approx. 1200x1100x1600 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication Kedpfoxu E I Hjx Aahofa About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, Dear Sir or Madam, We hereby offer a Deckel FP1 milling machine, 3-axis with retrofitted safety devices. This newer generation machine is equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. Additionally, the control cabinet can be disconnected from the machine in a matter of seconds thanks to Harting connectors. The connection of the safety components to the control cabinet is also made using this connector type, ensuring that ease of handling is maintained. We offer a 12-month warranty on the retrofitted safety devices, which can be supplied for any machine type! The electronic spindle guard is adjustable on several axes and is designed to prevent accidental contact with the spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cover is intended to prevent intervention into the rotating shaft stub and tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: fixed angular table Travels: X 300mm / Y 160mm / Z 340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed rate: infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle protection cover Our service promise to you: - We are a certified master workshop in mechanical engineering Kfodpouw Uu Njfx Aahea - All machines are thoroughly checked and inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices for you - We are happy to arrange shipping and/or installation

Kondisi: baik (bekas), Tahun pembuatan: 1985, Deckel FP1 Aktiv dengan tampilan digital Heidenhain 3 sumbu, 3 sumbu aktif, meja tetap, dudukan spindle SK 40 M16. Pelumasan sentral, buku petunjuk penggunaan. Kondisi sangat baik, siap pakai, berasal dari pusat pelatihan kejuruan. Dapat didemonstrasikan dalam keadaan terhubung listrik sesuai kesepakatan. Kjdpoxwunzjfx Aahjfa

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 36109, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gerak cepat sumbu X: 6.000 m/menit, pergeseran cepat sumbu Y: 6.000 m/menit, pergerakan cepat sumbu Z: 6.000 m/menit, daya nominal (semu): 16 kVA, tinggi total: 2.000 mm, panjang total: 3.000 mm, lebar total: 2.800 mm, lebar meja: 480 mm, panjang meja: 800 mm, beban meja: 530 kg, kecepatan rotasi (min.): 31 rpm, kecepatan rotasi (maks.): 5.000 rpm, berat keseluruhan: 2.800 kg, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, Mesin dalam kondisi baik, masih berjalan mulus dan menghasilkan pekerjaan yang presisi. Mesin dapat dilihat dalam keadaan beroperasi. Kfjdpfx Aaoxt Nlyshea

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2300-0053, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 300 mm, panjang meja: 1.000 mm, lebar meja: 520 mm, tinggi total: 1.900 mm, panjang total: 1.500 mm, lebar total: 1.800 mm, kecepatan rotasi (maks.): 200 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 1.000 kg, - Number of table slots: 6 EQUIPMENT: - Swiveling table - Three-axis digital readout (Heidenhain) Kfsdpewdn A Ujfx Aahsa - New bellows - New handwheels

Kondisi: baik (bekas), DECKEL FP2A CNC milling machine with Contour 3 control and vise. x-travel: 300 mm Kfsdpjrfaq Rjfx Aahja y-travel: 300 mm z-travel: 400 mm Spindle taper: ISO 40 Spindle speeds: 40 - 4000 rpm Table size: 620 x 390 mm Infinitely variable feed rates: 4 - 4000 mm/min Table load: 0.45 t Total power requirement: kW (value not specified) Machine weight: approx. 1.6 t Operating voltage: 380 V Footprint: 1.9 x 2.0 m Control cabinet: 1.90 x 0.75 x 1.05 m Required space: approx. 2.9 x 2.7 x 2.0 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle support, adjustable by 150 mm >> Vertical and horizontal quill – SK40 retractable >> Drawbar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis Heidenhain digital display Kfjdpfxoxghtvj Aahja >> Coolant system >> Mechanical central lubrication About the Machine: For sale is a Deckel FP2 universal milling machine in very good condition. The FP2 exhibits very little handwheel backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs smoothly. On this newer FP2 model, the feed is steplessly adjustable in all three axes; in addition, the machine features a rapid traverse for every axis. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dear Sir or Madam, We hereby offer milling machines of the type Deckel FP3. Each machine undergoes at least a thorough technical inspection in our workshop to ensure full operational functionality. We are looking forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90m (LxWxH) Weight: approx. 1500kg Travel distance X-axis: 500mm Travel distance Y-axis: 300mm Travel distance Z-axis: 380mm Table clamping surface: 800x420mm Spindle speed range: 40-2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500mm/min Rapid traverse: approx. 1500mm/min Additional equipment and accessories: on request Our service commitment to you: - We are a certified master craftsman business specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand Kfsdpfsq H Eabex Aahoa - Upon request, we can overhaul your selected machine completely or partially - You may freely choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can also install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation for you

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 S20x2 spindle taper. Good, operational condition; can be demonstrated under power by prior arrangement. Kfsdpjumcmqofx Aahsa

Kondisi: baik (bekas), Tahun pembuatan: 1980, nomor mesin/kendaraan: 4038, jarak pergerakan sumbu X: 290 mm, jarak lintasan sumbu Y: 150 mm, jarak gerak sumbu Z: 330 mm, diameter pemasangan: 40 mm, panjang meja: 600 mm, lebar meja: 210 mm, kecepatan rotasi (maks.): 2.000 rpm, kecepatan rotasi (min.): 40 rpm, berat keseluruhan: 700 kg, CONDITION & NOTES: Kfjdpfx Aewxpxmjahea - This is an active, axis-controlled tool milling machine.

Kondisi: baik (bekas), Tahun pembuatan: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Extended ram-type milling head. Accessories include various collets and cutter arbors, tailstock. Good operational condition. Can be demonstrated under power by appointment. Kfedoumclaspfx Aahea

Tahun pembuatan: 1976, Kondisi: baik (bekas), Deckel FP1 tool milling machine with 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table, SK 40 spindle taper vertical, and SK 40 horizontal. Accessories include various collets and arbors, tailstock support. The machine is in good, operational condition, though the paintwork is no longer in perfect shape. Can be demonstrated under power by arrangement. Kedjrhzcujpfx Aahsfa

Kondisi: baik (bekas), Tahun pembuatan: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and arbor holders, counter support. Good, operational condition. Can be demonstrated under power by appointment. Kfodpfx Aajxu Uvtehea