Beli Jangkar Pengikat bekas (814)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H) 4200 x 1500 x 1500 mm Weight: 1050 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ+EK DELUXE - Min. / max. edge thickness: 0.4 - 2 mm - Min. / max. edge height: 15 - 55 mm Fedpfx Ajvz E Tmodgoft - Min. / max. workpiece height: 15 - 50 mm - Min. workpiece width: 70 mm - Min. workpiece length: 200 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel (touch panel) at the machine infeed at eye level - Chain feed - Support plate for PVC and ABS edge banding rolls up to 550 mm - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Glue pot, Teflon coated, for hot melt adhesive granulate, capacity 3 kg - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200 °C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Pre-milling unit with 2 HW pre-milling cutterheads for jointing before glue application, vertical spindle adjustment, electro-pneumatic horizontal adjustment, 2 motors, each 1.4 kW, 200 Hz, 9000 rpm (1 x clockwise, 1 x counterclockwise) - Heating lamp for panel pre-warming - Pre-cutting from the roll - 3 solid steel pressure rollers - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Contour trimming unit (corner rounding) top and bottom, for trimming flush and rounding off PVC edges, 0.55 kW motor, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side, for rounding pre-milled PVC edges - Buffing unit for edge finishing, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1400 rpm, angle and height adjustable - Spray nozzle system (cleaning liquid) - Total power consumption: 8.0 kW / 400 V - Extraction nozzles: 4 x Ø 100 mm - Extendable workpiece support - Soundproof enclosure with viewing window - Compressed air connection: 6 bar - Overall dimensions: L=4200, W=1500, H=1500 mm - Transport dimensions: L=4000, W=700, H=1500 mm - Weight: 1050 kg

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Ffjdpfxewka N To Adgot Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: bekas, Mesin Pelapis Tepi Tempora F 60.06 - Tahun pembuatan: 2018 - Mesin frais sambungan, mesin frais radius, pisau tarik untuk radius dan permukaan - Cairan pembersih dan pemisah - Perangkat penyemprot - Ketebalan tepi: 0,4–6 mm Fodpfx Adox Ha I Uogoft - Panjang instalasi: 3220 mm - Pemotongan gergaji

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Ffodpfxjifnxxj Adgjt Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: bekas, AUTOMATIC STRAPPING STATION SIGNODE, model M400 The formed package is automatically transferred via the powered rollers of the discharge carriage to the automatic system. It will stop at the pre-programmed strapping positions to allow for the automatic application of the steel straps. Fodowxxz Rjpfx Adgeft Comprises: - SIGNODE automatic strapping machine, model M400/PA/TSM, for vertical strapping - Pneumatic floating strapping head for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap - 450 kg strap dispenser with electric reel - Control panel SIGNODE automatic strapping machine: Model M400/PA/TSM for vertical strapping Pneumatic floating strapping head: for 32 mm (1¼") wide, 0.9 mm wall thickness steel strap 450 kg strap dispenser: with electric reel Control panel: Included

Kondisi: bekas, Mesin edging bekas dari pembubaran penjilidan buku, Ffedpfx Asx Dthgjdgot - dengan bak lem panas - lebar rol 60 mm

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3810 x 575 x 1520 mm Weight: 1000 kg Total Power Requirement: 8 kW Edgebander KANTOMAX BASIC FÜ+EK - Minimum / Maximum Edge Thickness: 0.4 - 2 mm - Minimum / Maximum Edge Height: 15 - 48 mm - Minimum / Maximum Workpiece Height: 10 - 45 mm - Minimum Workpiece Width: 80 mm - Minimum Workpiece Length: 120 mm - Feed Motor: 1.1 kW - Feed Speed: 8, 12, 16 m/min - Operator panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edgebanding materials - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for glue joint compaction - Centrally adjustable top pressure - Teflon-coated glue pot for hot melt adhesive granules - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming unit - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA jointing cutter heads for pre-milling prior to gluing, spindle adjustment vertical, electro-pneumatic horizontal control, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (one with, one against feed direction) Ffodpfx Ajvz E Scodgst - End trimming saw unit for front and rear edge overhangs, high-precision linear guides, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Top and bottom flush/radius trimming unit with vertical and horizontal sensors, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Corner rounding unit (profile trimming) top and bottom, for rounding PVC edges, motor 0.37 kW, 200 Hz, 12,000 rpm - Radius scraper unit with top, bottom and side sensing for rounding pre-milled PVC edges - Buffing unit for final edge finishing on top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, adjustable tilt and height - Total power consumption: 8.0 kW / 400 V - Extraction port Ø 100 mm - Extendable workpiece support - Sound enclosure with inspection window - Compressed air connection: 6 bar - Overall dimensions: L=4000, W=1000, H=1420 mm - Transport dimensions: L=3810, W=575, H=1520 mm - Weight: 1000 kg

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Fjdjwka Nyopfx Adgeft Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, kapasitas tangki: 3.586 l, EN_GENERAL Equipment: Crane lugs Design: suspended Remarks: Further technical documentation available; sight glass in manhole cover missing; support ring made of Fe; flanges partly made of Fe Speed: 6 - 40 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with the relevant ATEX directives under local conditions must be verified) Overall height: 4,250 mm Heating/cooling: available Power: 3.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: anchor agitator Base design: ring Location: Bremen Technical documentation: drawing, acceptance certificate Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,586 litres Double jacket volume: 202.0 litres Cylinder wall thickness: 6 mm Product contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,377 mm Previous use: pharmaceutical chemistry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating underpressure: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole / access port: in the upper head (DN 500) MATERIAL SPECIFICATION Material tempering system: AISI 304 (V2A) 1.4306 AGITATOR 1 Voltage: 400/690 volts Fedpfx Ajxqaxrjdgsft TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6.5 mm Agitator arrangement: centrally in upper head Agitator features: drive speed adjustable via handwheel Upper head wall thickness: 9.1 mm

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Edge material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: approx. 230 / 1600 Control / Software: WinEdge Feed speed (variable) m/min: approx. 10 - 30 Protective and soundproof cabins FORMATTING UNITS (per side): No. 2 hogging units (2 x approx. 5.8 kW) No. 2 jointing-milling units aft (2 x approx. 4 kW) EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + pre-melter) Pressure zone (CNC-controlled) Magazine for edge rolls (number of slots): 6 Pre-milling unit 08.055 (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW, 0°-30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x approx. 4 kW) Fodpfx Adel Hydmogeft Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air blower – edge finishing

Kondisi: baru, Tahun pembuatan: 2025, Measurements (Length/Width/Height) 1050x830x1100 mm Weight 133 kg Total power requirement 2.1 kW Edgebanding Machine KAM535NEO - Motor power S1 250 (+1750) W - Voltage 400 V / 3 / 50 Hz - Feed speed 0–15 m/min - Table size 1000 x 700 mm - Table height 850 mm - Min. workpiece thickness 10 mm - Max. workpiece thickness 50 mm - Edge width 13–54 mm - Edge thickness 0.3–3 mm - Working air pressure 4–5 bar - Operating temperature 170 °C - Min. internal curve radius 20 mm - Sound pressure level dB(A) < 70 - Packing width 830 mm - Packing length 1,050 mm - Packing height 1,100 mm - Gross weight 161 kg - Net weight 133 kg - Semi-automatic edgebanding machine - The machine is suitable not only for straight edges but also specifically for edging curved edges - Direct glue application on straight and curved edges - Double-sided glue application on laminate and edge - Automatic length cutting - Glue temperature electronically adjustable - Feed speed variably adjustable - 1750 W heating power - 250 W feed motor Fodsvz E Hmepfx Adgjft

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Kecepatan pemajuan sekitar 11 m/menit Siap operasi dalam waktu sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Ffodpfxewka Tlj Adgot Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: bekas, kapasitas tangki: 890 l, GENERAL Equipment: crane lugs Design: suspended Notes: 4 mounting feet, Fe; outlet with flanged fitting Speed: 6.7 - 41 rpm External diameter: 1,200 mm Internal diameter: 1,100 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,700 mm Heating/cooling: available Power: 1.5 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Max. overpressure: 6.0 bar Seal: mechanical seal with thermosiphon system Agitator: anchor agitator Support: mounting feet Location: Bremen Technical documentation: drawing, various documents, test certificate Jacketed vessel (cylinder): double jacket Nameplate: Vacuum: 1.0 bar Volume: 890 litres Double jacket volume: 145.0 litres Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Fjdpfx Aoxqaiwjdgeft Condition: used Previous application: chemicals VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Base temperature control: double jacket EQUIPMENT Manhole / dome: in the top cover (DN 400) Outlet: DN80 DIN 11851 MATERIAL PROPERTIES Jacket system material: V4A 1.4571 (AISI316) AGITATOR 1 Agitator manufacturer: Ekato Voltage: 220/380 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator arrangement: centrally in the top cover Agitator features: speed adjustable via handwheel Top cover wall thickness: 8 mm

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Fodpfx Adok Nk R Dogjft Edge thickness with rolls (min/max) mm: 0.3 - 3 Edge thickness with lippings/strips (min/max) optional: mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and soundproof enclosure Cam spacing (mm): 500 FORMATTING UNIT (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Cutting unit (2 x approx. 5.8 kW) Universal milling unit 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (No. 2 positions) + edge pressing zone End trimming unit (2 x 0.35 kW approx.) Pre-milling unit (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx.) 0°-30° Multi-functional unit (radius milling and contour milling aggregate) with 2 revolvers (8+8 positions) - max 27 m/min Universal routing unit for grooving/rebating and profiling 1 x approx. 4 kW (0° - 90°) Profile scraper unit + flat scraper unit + buffing unit

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3200 x 780 x 1500 mm Weight: 800 kg Total power requirement: 8 kW Edge banding machine KANTOMAX BASIC FÜ - Min. / max. edge thickness: 0.4 - 3 mm - Min. / max. edge height: 15 - 48 mm - Min. / max. workpiece height: 10 - 45 mm Ffedpfxsvz E Eve Adget - Min. workpiece width: 80 mm - Min. workpiece length: 100 mm - Feed motor: 1.1 kW - Feed speed: 12 m/min - Control panel at machine infeed, at eye level - Chain feed - Support plate for PVC and ABS edging material - Pressure zone with pneumatically driven main pressure roller and follow-up rollers for compressing the glue joint - Centrally adjustable top pressure - Teflon-coated glue pot for hot-melt adhesive granulate - Glue application to the workpiece via glue roller - Electronic temperature control, working temperature 180 - 200°C - Pneumatic end trimming - Pneumatic cylinder for workpiece spacing - Jointing unit with 2 DIA (diamond-tipped) jointing cutter heads for pre-joining before gluing, spindle adjustment vertical, electro-pneumatic control horizontal, 2 motors each 1.8 kW, 200 Hz, 12,000 rpm (1 x clockwise, 1 x counterclockwise) - End trimming saw unit for front and rear edge overhang. High precision linear guide, motors 0.5 kW, 200 Hz, 12,000 rpm, pull cut for high accuracy - Flush and radius milling unit, top and bottom, with vertical and horizontal tracing, 2 motors each 0.5 kW, 200 Hz, 12,000 rpm - Radius scraper unit with tracing from top, bottom, and side for rounding pre-milled PVC edges - Buffing unit to improve edge grip, top and bottom, 2 motors each 0.18 kW, 50 Hz, 1,400 rpm, tiltable and height adjustable - Total power consumption: 8.0 kW / 400 V - Extraction nozzle Ø 100 mm - Extendable workpiece support - Sound enclosure with viewing window - Compressed air connection: 6 bar - Dimensions: L=3200, W=780, H=1500 mm - Weight: 800 kg

Kondisi: bekas, Tahun pembuatan: 2020, Mesin bekas Tahun pembuatan: 2020 Ffedox Enquspfx Adgjt Perlengkapan: - Pengendalian unit melalui layar sentuh - Unit milling sambungan - Wadah lem - Unit pemotong - Unit milling radius - Unit pisau penarik radius - Unit pisau penarik permukaan - Unit pemoles - Penyemprotan depan dan belakang Lokasi: Rheinland-Pfalz Ketersediaan: Sesuai kesepakatan Penjualan atas nama pelanggan. Informasi tanpa jaminan.

Kondisi: sangat baik (bekas), Zum Anleimen von Kanten an gerade, runde und profilierte Werkstücke - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Coil-/Rollenhaltertisch - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenbanddicke: 0,4 bis 3 mm Ffsdpfohgbfaox Adgst - Schwenkbarer Tisch 0°-45° - Gesamtinstallierte Leistung ca. 4 kW

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Ffjdpfx Aed Nuu Hodgot Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1200 Control/Software PC 22 Feed speed (adjustable) m/min 18 – 32 Panel infeed system WZ 14/30 Jointing unit with CNC control (2 x 3 kW) DOUBLE gluing unit (PUR adhesive + premelter) 2 x PU 34 Pressure zone (CNC controlled) – Edge magazine for rolls (No. 12 positions) End trimming unit WK13 (BEVEL/STRAIGHT automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC controlled) MF 21 (2 x 0.55 kW) Profile milling unit (copying) FF 32 (4 x 0.4 kW) automatic changeover device Contour milling unit (for fine milling) CNC controlled FK 31 (30 m/min) recently added after technological overhaul Multi-profile scraper unit (CNC controlled) MN 21 (servo) Finishing unit (flat scraper + smoothing unit) FA 11 Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) Ffodpfx Aoinigmsdgst M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Ffedpom Udfwjfx Adgst Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Fedpfxot N H Tae Adgoft Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 Fjdpfxoi Hn Srs Adgjft End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Fedpfjkt Uuajx Adgoft Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Fjdpfeltmnljx Adgeft Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 Ffedpfx Aoifnzdjdgst End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)