Beli Lem Pabrik bekas (4.106)

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 6.800 h, Fungsionalitas: belum diuji, Basic Package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive 50 mm EC towing eye including slip-on shoe Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side mudguards) Permissible gross weight: 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent control of material feed including automatic reversing of the scraper floor Fuel tank: 450 liters Feed roller: length 1,690 mm, diameter 510 mm, featuring bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip “Streusel” Centrally located lubrication bars Electric pump for cylinder functions (e.g. lifting/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, disengaging the drive) when the engine is switched off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine-shredding basket (mesh size 30 - 280 mm, gradations on request) including rear flap Scraper floor with 32 slats Complete radio remote control Preparation for drive system Acoustic start-up warning Paintwork: RAL2011 deep orange Optional Equipment: Special paintwork in DB6841 MB-Trac Green Nkedpfx Aexx Rvkjglot Hydraulic drive system Fuel tank 600 l Fine-shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper for side walls Impact plate with strike bar and additional tooth row Delivery date upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 135 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 24.740 kg, lebar transportasi: 2.540 mm, panjang transportasi: 9.141 mm, tinggi transportasi: 3.604 mm, daya: 260 kW (353,50 hp), Equipment: Basic Package Inventhor Type 6 - Load-sensing system - Fuel tank: 500 liters - Longitudinal conveyor: conveyor length 2,900 mm, conveyor width 800 mm - Centrally arranged lubrication strips - 24V electric control – additional electric pump for operating the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side fiberglass (GRP) maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear section - Hydraulically reversible fan - Three-sided loading protection Nkjdpfx Agjxd T Hceljt - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional Equipment: - Drive train 260 kW – EV - 3-axle drawbar chassis unit - Size L shredding system – 20 teeth - Size L limiter - Auxiliary hydraulic connections 35–80 l/min - Hydraulic drive - 350 mm hopper extension, watering device on both sides - 7 m rear conveyor - Overbelt neodymium magnet - Frame for 7 m overbelt magnet Delivery date by arrangement

Kondisi: baik (bekas), Tahun pembuatan: 2023, jam operasional: 60 h, Fungsionalitas: berfungsi sepenuhnya, Equipment: Standard Package Methor "Hooklift" - 24V electric control system - Maintenance-friendly engine compartment with LED lighting - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paintwork: RAL 2011 deep orange Nkjdpfxsvrw Tmj Aglet Additional Equipment: Hooklift according to DIN 30722-1 (Germany) Size L shredding system (8 teeth) Three-phase motor 200 kW EUROPE + electric pump Large hooklift radio control unit Discharge conveyor 6.9 m Framework for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Kondisi: baru, Tahun pembuatan: 2024, GT-SERIE MESSERMÜHLEN MASCHINEN IM SCHALLGEDÄMMTEN GEHÄUSE, KOMPLETT MIT BIG-BAG-STATION OFFENER ROTOR MIT V-SCHNITT-SYSTEM FOLGENDE MÜHLENGRÖSSEN SIND AB LAGER VERFÜGBAR Nodpfx Aoudyghoglokt GT300/600 ROTOR-DURCHMESSER: 300 MM ROTOR-LÄNGE: 600 MM HAUPTMOTOR: 15 KW GT300/800 ROTOR-DURCHMESSER: 300 MM ROTOR-LÄNGE: 800 MM HAUPTMOTOR: 22 KW GT400/800 ROTOR-DURCHMESSER: 300 MM ROTOR-LÄNGE: 800 MM HAUPTMOTOR: 30 KW

Kondisi: baru, Tahun pembuatan: 2026, Consisting of a bale breaker for large bales, type MHB, and straw shredder type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (Approx. 15 weeks production time) Suitable for round or square bales. Including frequency inverter (controls the speed of the scraper floor). The bales are placed on the scraper floor and the cutter head feed is switched on. The cutter head tines tear the straw from the bale and throw it into the hopper. Ideally, this machine is combined with a straw shredder. Technical data for bale breaker: Capacity: 1–2 bales per hour Up to a maximum of 600 kg per hour (depending on the installed sieve size in the straw mill, kW rating of the straw mill). Without a straw mill, the bale breaker can process up to 900 kg/hr of straw. Maximum square bale size: 2400 x 1200 x 800 mm (LxWxH) Cutter head motor: 5.5 kW, 380 V Scraper floor feed: 0.75 kW, 380 V Dimensions: 3750 x 1730 x 2460 mm (LxWxH) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for the larger straw shredder (18.5 kW): +€3,940 net Technical data, MHZ with special feed hopper: Motor: 15 kW, 380 V electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Nsdpsb Nulhefx Aglokt Selectable perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Options at extra cost: Feed auger: +€970 net Cyclone (suspension by customer) *should be no more than 10 m away +€2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional rotary valve (renders material pressureless) +€5,750 net Control system: from €1,620 net Special bale breaker extension 3m (other dimensions upon request) +€9,750 net Briquetting press MPP 180 S; little-used demonstration unit 70 mm briquette – up to max. 100 kg/hr from €39,700 net * Larger machines available on request --- Description: muetek bale breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ/MHB series are characterized by their robust design and heavy-duty construction. muetek bale breakers of the MHB series are equipped with a chain conveyor onto which the bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor pushes the bale against the cutter rotor; the feed speed is adjustable. The cutter rotor is fitted with multiple teeth which rip open the straw bale. The separated straw is then discharged. --- The machines are generally designed for dry materials: - Straw - Hay --- Processing hemp bales is only possible with a special bale breaker Surcharge approx. €9,720 net (depending on configuration) Straw mills are not suitable for processing hemp. Material requirements: Maximum moisture content: 12%

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times Nkedpfx Agob Ny Eyslot - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 590 h, Fungsionalitas: belum diuji, en-1 Nkodpfjvnq Rksx Aglot

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 2.380 h, Fungsionalitas: berfungsi sepenuhnya, AK 315 Basic Package: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. EBS and lighting according to EC Directive Tyres: 385/65 R22.5 50 mm EC towing eye incl. slip-on coupling shoe Hydraulically adjustable support leg Splash guards (mudguards inside and side panels) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, compliant with EUROMOT V emission standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste screen basket with tailgate Impact plate with teeth Fuel tank 300 litres Feed roller: length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for actuation of cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive for feed roller and scraper floor Advanced radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic centre section Reinforcement plates (Hardox) on both sides of the loading hopper for the side walls (loading edge) Drive preparation Fire extinguisher Doppstadt Telematics System Paint finish: RAL2011 deep orange Nedpfx Agoxx Sdpolskt Additional equipment: Hydrostatic drive Upgraded radio remote control with foot switch Flail tips “Bear’s Paw” Fine-shredding basket Water spray system Lighting package: engine compartment and rear conveyor Delivery date upon agreement

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 2.798 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA: 3-axle semi-trailer chassis, road approval for 80 km/h Braking system incl. ABS and lighting according to EU directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash guards (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip “Streusel plus” Impact plate with teeth Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raise/lower support legs and open/close rear basket, fold/unfold rear belt, release drive) when engine is off 24 V electrical controls Separate control box at rear of machine Hydraulically folding fine shredding basket “Multimesh” (mesh size 30 – 280 mm, gradations on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic centre section Lower belt: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Water spray system for external water connection Scraper floor with 71 bars Wear protection in drum area Reinforcement plates on feed hopper (wear-resistant steel), both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Optional Equipment: Hydrostatic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package for scraper floor and feed Flail tips “Bear Paw” Nkedpfxsxx Rrrj Aglet Delivery date to be arranged Available from 04/2026

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 600 h, Fungsionalitas: belum diuji, Equipment: Basic Methor Kette package without shredding system - Track undercarriage including 2 travel speeds - 400mm triple-bar tracked chain - Auxiliary hydraulic connection 70 l/min - 24V electric control system - Full-size radio remote control - Maintenance-friendly engine compartment with LED lighting - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special Equipment: Shredding system Size L (8 teeth) Cat C7.1 engine, 205 kW Rear conveyor 6.9 m Nkjdpfx Asvrz Rvsgljt Frame for overband magnet Overband magnet Watering system

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: Belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips Njdpfx Ajxx Sbnoglskt 24 V electric control – additional electric pump for operation of the following functions when the engine is switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL2011 deep orange Additional Equipment: Powertrain 260 kW – electric drive 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connection 35 – 80 l/min Hydraulic drive Hopper extension 350 mm, irrigation on both sides Rear conveyor 7 m Overband magnet – neodymium Frame for overband magnet 7 m Delivery date to be agreed

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 4.826 h, en-GB-1 Nkjdevnmldspfx Aglot

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, de-en Nksdownfwqopfx Aglst

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.300 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side fenders) Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for intake roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Intake roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged lubrication bars Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24-V electrical control system Separate control box at rear of machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including one-piece rear flap Rear conveyor: Belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, includes antimagnetic centre section Underside conveyor: Belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL 2011 deep orange Additional Equipment: Hydrostatic travel drive Nkjdpfx Agjxx Tigoljt Scraper floor chain lubrication NEODYMIUM overband magnet Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: engine compartment and rear conveyor Spraying system Delivery date to be agreed Available from 06/2026

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 881 h, Fungsionalitas: belum diuji, Perlengkapan: Paket dasar Methor dengan trek rantai Sasis berkaki rantai termasuk 2 kecepatan berjalan Rantai bawah 400 mm dengan 3 sirip Sambungan hidrolik tambahan 70 l/menit Kontrol elektrik 24-V Remote control nirkabel besar lengkap Ruang mesin ramah perawatan dengan lampu LED Hopper lipat dengan sensor posisi dan kontrol otomatis Kipas dapat di-reverse secara hidrolik Peringatan mulai berbunyi Tangki bahan bakar 300 liter Pengecatan: RAL 2011 oranye tua Perlengkapan tambahan: Mesin Cat C7.1, 205 kW Konveyor belakang 6,9 m Rangka untuk magnet overband Magnet overband Sistem pengganti cepat untuk rol Sistem pengganti cepat untuk rol Sistem penyiraman Penerangan kerja LED Pompa listrik tambahan untuk pengoperasian saat mesin mati Nkjdpfx Agjvnmmzolet Pemadam api GN 9 A-3 DIN EN 3

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, en: Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electric control – additional electric pump for the activation of the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large lateral GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Optional equipment: Drivetrain 310 kW - EV 3-axle drawbar chassis unit Comminution system Size L-C3 600/4-30Z Size L limiter Additional hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet neodymium Frame for overband magnet 7 m Central lubrication system Special paint in RAL Delivery date upon agreement fr: Pack de base Inventhor 6 : Système load-sensing Réservoir de carburant 500 litres Convoyeur longitudinal : longueur de bande 2 900 mm, largeur de bande 800 mm Lattes d’usure centrales Commande électrique 24 V – pompe électrique supplémentaire pour l’activation des fonctions suivantes moteur à l’arrêt : Relevage/abaissement/coudage du convoyeur arrière, ouverture/fermeture du clapet peigne, ouverture/fermeture du peigne, relevage/abaissement de la trémie rabattable Télécommande complète Grandes portes de maintenance latérales en PRV Compartiment moteur facile d’accès Kit d’éclairage LED : compartiment moteur et arrière Ventilateur hydraulique réversible Protection de chargement sur trois côtés Trémie rabattable Extincteur Nksdpfxjxx N T Is Aglst Échelle de maintenance Boîte à outils Avertisseur sonore de démarrage Système télématique Doppstadt Peinture : RAL2011 orange profond Équipements optionnels : Chaîne cinématique 310 kW - EV Ensemble de train roulant à timon à 3 essieux Système de broyage taille L-C3 600/4-30Z Limiteur taille L Prises hydrauliques supplémentaires 35–80 l/min Entraînement hydraulique Rehausse de trémie 350 mm, arrosage à gauche Convoyeur arrière 7 m Séparateur magnétique à aimant néodyme Châssis pour séparateur magnétique 7 m Système de lubrification centralisé Peinture spéciale RAL Délai de livraison à convenir es: Paquete básico Inventhor 6: Sistema Load-Sensing Depósito de combustible de 500 litros Cinta longitudinal: longitud 2.900 mm, ancho 800 mm Lamas de desgaste centralizadas Control eléctrico de 24 V – bomba eléctrica adicional para el accionamiento de las siguientes funciones con el motor parado: Elevar/bajar/plegar cinta trasera, abrir/cerrar compuerta de peine, abrir/cerrar peine, subir/bajar tolva abatible Control remoto completo Grandes puertas de mantenimiento laterales de PRFV Compartimento del motor de fácil acceso para mantenimiento Paquete de iluminación LED: motor y zona trasera Ventilador hidráulico reversible Protección de carga por tres lados Tolva abatible Extintor Escalera para mantenimiento Caja de herramientas Avisador acústico de arranque Sistema telemático Doppstadt Pintura: RAL2011 naranja intenso Equipamiento adicional: Transmisión 310 kW - EV Unidad de chasis con lanza de tiro de 3 ejes Sistema de trituración tamaño L-C3 600/4-30Z Limitador tamaño L Conexiones hidráulicas adicionales 35–8

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 200 h, Fungsionalitas: belum diuji, Equipment: Nkjdpfxovnq Tre Aglet Basic Package Methor Track Tracked undercarriage incl. 2 travel speeds Undercarriage track 400mm, triple grouser Auxiliary hydraulic connection 70 l/min 24 V electric control Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan Acoustic start-up warning Fuel tank 300 liters Paint finish: RAL 2011 deep orange Additional Equipment: Rubber quick-change pads Engine Cat C7.1, 205 kW Rear discharge conveyor 6.9 m Shredding system Size L (8 teeth) Frame for overband magnet Overband magnet Quick-change roller system on the roller Quick-change roller system on the machine Water spray system LED work lighting Additional electric pump for operation in case of engine shutdown

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 1.150 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control system – additional electric pump for operating the following functions when the engine is off: raise/lower/fold rear conveyor, open/close comb gate, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear section Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Nkjdpfoxx N Dgex Aglst Paintwork: RAL2011 deep orange Optional Equipment: 260 kW - EV powertrain 2-axle semi-trailer chassis unit Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic ports 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system on both sides Size L hopper wedge with NM brush Rear conveyor 7 m Neodymium over-belt magnet Frame for 7 m over-belt magnet Delivery date by arrangement

Kondisi: bekas, Tahun pembuatan: 2010, overview-2010-kosme-cold-glue-labeler Nkjdpfx Aexn T Nfeglot

Kondisi: bekas, Tahun pembuatan: 2005, Overview: This labelling machine was manufactured by Gernep in 2005. It remained operational in a fruit juice production facility in Germany until 01/2022. At this plant, it was only used in single-shift operation for approximately 100 days per year, which is why the condition of the machine is still very good. Nsdsl Hxzvopfx Aglskt Technical Data: Capacity: 6,000 bph with 1L bottles Number of stations: 2 Accessories: Formats for 1.0L VdF glass bottles, 0.7L VdF, and 0.2L glass bottles (long-neck) Various spare parts included in the scope of delivery.

Kondisi: bekas, Tahun pembuatan: 2007, Overview The machine was built in 2007 by the Spanish company Seppelec. The machine is still assembled but no longer in operation, as the plant has ceased production. Prior to decommissioning, the machine underwent intensive maintenance and was tested with phosphorescent material. Technical Details Capacity: 13,500 l/h Pressure to prevent degassing: 7 bar Temperature during pasteurization: 85°C Machine Documentation Heat exchanger plate | SPX Flow | H17 | 2013 Control system: Siemens S7-300 Cpu 314 2dp Nksdpfx Ageq T Ak Hjlot Communication interface type: Profibus

Kondisi: bekas, Tahun pembuatan: 2009, Overview The labeling machine was manufactured in 2009 by the Italian company PE Labellers. The machine is in good condition, has already been professionally dismantled, and is in storage. Technical Details Capacity: 12,000 bottles/hour Suitable for: 1.0L and 1.5L Nkedpfx Aew En Utogljt Working direction: Infeed left – outfeed right (counterclockwise) Number of labeling heads: 12 Label position: Wrap-around labeling Label material: OPP with hotmelt adhesive Machine drive: Siemens S7 Processed bottles & format parts included: 0.25L - 0.50L - 1.0L

Kondisi: bekas, Tahun pembuatan: 2018, Overview This complete brewing and packaging plant was manufactured in 2018, mainly by Cespedes (Spain) and other European companies such as Anfara, Sommer, and Braumanufaktur Werk. It comprises brewhouse, fermentation, utilities, CIP, and filling systems, all constructed from AISI 304 stainless steel. With a brewhouse capacity of 1,500 liters per batch and three 3,000-liter fermenters, it is designed for small to medium-sized breweries. The system is in excellent condition and ready for immediate operation. Technical Data - Capacity: 1,500 l per batch (brewhouse), 3 × 3,000 l fermenters - Formats: Bottles and cans (330 ml, 440 ml, 500 ml) Nksdpfx Asw U Tgxoglet - Brewing system: Steam heated, all stainless steel - Filler: 6-head semi-automatic isobaric bottle filler, modular semi-automatic can filler and seamer (approx. 150 cans/h) Scope of Supply - Brew kettle / whirlpool tank | Cespedes | – | 2018 | usable volume 1,500 L, double-jacketed, steam heated, fully insulated, AISI 304 stainless steel - Mash/lauter tun | Cespedes | – | 2018 | usable volume 2,000 L, motorized agitator, insulated, AISI 304 stainless steel - Hot liquor tank (HLT) | Cespedes | – | 2018 | 3,000 L, insulated, with heating jacket - Fermentation/maturation tanks (3 units) | Cespedes | – | 2018 | each 3,000 L usable volume, pressure vessel up to 3 bar, insulated, cooling jacket - Control system | Cespedes | – | 2018 | recipe management, temperature control, frequency converter - Operator platform with ladder | Cespedes | – | 2018 | stainless steel, non-slip, with railing - Manifold + piping | Cespedes | – | 2018 | stainless steel, sanitary DIN valves, including helicoidal pump - Plate heat exchanger | – | UPF34/70 | – | stainless steel, for wort cooling - Inline particle filter | – | – | 2018 | AISI 304 stainless steel, slot width 0.2 mm - Sight glass | – | – | – | AISI 316 stainless steel, hygienic inline inspection window - Steam generator | Anfara | AV-300 | 2018 | 300 kg/h, 5 bar, oil burner, CE-certified - CIP system | – | CDXM 70-5 | 2021 | 3.0–9.6 m³/h flow rate, 1.5 kW motor - Semi-automatic bottle filler | Cespedes | ISO-6 | 2016 | 6 filling heads, isobaric, stainless steel - Semi-automatic can filler + seamer | Braumanufaktur Werk | Fillmatic | 2021 | modular, formats 330–500 ml, approx. 150 cans/h - Malt mill | Sommer Maschinenbau | Maltman | 2019 | up to 1,500 L batches, 2-roller mill - Buffer/intermediate tank | – | – | – | 565 L

Kondisi: bekas, Tahun pembuatan: 2005, Overview This cold glue labelling machine was manufactured in 2005 by the German company HEUFT. The machine is no longer in production use and is now available for sale. It features two integrated laser coders for date marking and supports a broad range of bottle formats. It is ideal for high-speed beverage production. Technical Data Capacity: Up to 60,000 bottles per hour Formats: Supports 11 bottle formats From 0.3l - 0.66l Steini, NRW, Longneck Container types: Glass, non-transparent, non-contoured Container diameter: 60.4 - 69.1 mm Container height: 174 - 270 mm Label positions: Front (up to 2 labels) Rear (up to 1 label) Label size range: Width: 70 - 111 mm Height: 33 - 100 mm Conveyor height: 1100 mm Maximum ambient temperature: 40°C Power supply: 400 V Machine design: Straight version, size L (approx. 3360 mm wide) Bottle carousel diameter: 1610 mm Number of bottle plates: 42 Bottle rotation on carousel: Mechanical Feed star diameter: 690 mm Labelling stations: 2 x cold glue labelling stations 8 glue pallets 9 gripper positions Automatic magazine feed Scope of delivery 1 x Labelling machine | HEUFT | TORNADO | 2005 Including: 2 x integrated laser coders | Bluhm Complete labelling system with change parts for 11 bottle formats Cold glue stations, glue pallets, gripper arms, and automatic magazine Technical documentation Nodjwd Uk Sepfx Aglokt

Kondisi: bekas, Tahun pembuatan: 2010, Overview This rotary cold glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels to cylindrical glass bottles using cold glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is in very good working condition. Technical Data - Output: up to 10,000 bottles/hour - Bottle formats: 330 ml, 500 ml, 750 ml - Bottle height range: 50–360 mm Njdpfoxl Di Dex Agljkt - Bottle diameter range: 40–160 mm - Label length range: 30–140 mm - Rotation direction: clockwise - Number of bottle plates: 10 - Number of labelling stations: 1 - Air consumption: 125 l/min - Power consumption: 17.3 kVA, 400 V - Working height: 1,100 ± 50 mm - Construction: Stainless steel frame, enclosed safety housing - Control: micro PLC with touchscreen for speed, production, and error management Main Features - Cold glue labelling head with oil-bath lubricated mechanisms - Central carousel with centering bases for precise bottle positioning - Pneumatically heated pump for adhesive recirculation and return system - Automatic bottle synchronization with feed screw to prevent breakage - Micrometric adhesive adjustment to reduce film thickness and ensure clean labelling - Bottle holders for smooth handling and reduced jams - Gear drive with clutch and emergency stop system - Compact, fully enclosed design for hygiene and safety