Beli Singer bekas (48)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. Lredpfx Aeh R Taqjglog The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops Lrjdpfx Asmhhy Neglsg = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Lrjdpfx Agemhhypolog

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time Ledomhh Dhjpfx Aglsrg - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Ledpfemhh Dzex Aglerg Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance Lredped Tbbdefx Agleg - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Lrodsfdkb Tepfx Agleg - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Lrodpfxomhhx Is Agleg - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface Lrsdpfxomhhyae Aglsg - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard - Technical telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) Lrodpfx Agemhh Anoljg - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard Lodpjh Ek Daefx Aglsrg - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. Lrodpfx Agsd Tqalslsg When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Ljdpfx Asguk A Hjgljrg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) Lrodefdkb Ujpfx Agleg - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface Ledpemhhf Ssfx Agljrg - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) Lsdpfx Aemhhl Hogljrg With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) Lredpfx Aoguk Dksglog * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. Ljdpfx Agjfdkbhjlerg According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) Ljdpfx Agomidyfslerg - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. Ledpfxjmkixwj Agljrg The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth Lrjdpfxomhh Dte Agleg - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Lodpfx Agjguk Dvjljrg Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. Lsdpfx Agsqt Dmyelerg The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: siap digunakan (bekas), There are 22 machines available: 4x Singer 770 D41PE, 2x Singer 990 E3, 1x Singer 993 E3 FA320, 1x Singer 460 K73, 1x Union Spezial Class 75300 A, 1x Rimoldi 446930, 1x Romoldi 416498, 1x Rimoldi S60, 1x Rimoldi 7142, 1x Rimoldi 7143, 1x Lewis 150-2, 2x Kettma Class 100KA, 1x Kettma Class 100 KAS, and four additional machines. Ljdpfxoihc Hhe Aglsrg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, produsen pengendali: HEIDENHAIN, model controller: iTNC640, kecepatan spindel (maks.): 42.000 rpm, daya motor spindle: 15.000 W, jumlah slot dalam magazin alat: 32, en Ljdpfx Agex D Ektjljrg