Beli Universal Thread Grinding bekas (10.145)

Kondisi: bekas, Tahun pembuatan: 2004, de23t01 Bedpfeywntysx Afpsll

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine was overhauled according to Kellenberger measurement protocol and newly painted. The prone-to-failure Güttinger control was replaced by the modern BEMA X control system. This means the machine also received completely new electrics during this process. Blodpfxovq R Uzo Afpsl The machine is equipped with a reinforced workpiece headstock for supported grinding of heavy workpieces. Please note: The machine currently does not meet the basic safety and protection requirements as stipulated in BetrSichV 2015. Raising the required minimum safety standard must be determined through a risk assessment according to BetrSichV.

Kondisi: bekas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed (per stroke): 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±10° Table longitudinal movement: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg incl. clamping Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.2 t Floor space required approx.: 3.1 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition with warranty, but can also provide service for your machines, fully overhauled to metric standards and newly painted. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the X-axis flat bed, as well as air lift-off in the grinding spindle stock. BEMA standard features include: - 2-axis digital readout. X-axis resolution: 0.5 μm - Grinding spindle speed display - Stepless speed control for the grinding spindle, 70–100% - Stepless speed control for the internal grinding spindle, 70–100% - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional features (at extra cost): - Encoder with digital display in the workpiece headstock Blodsd Ih D Ejpfx Afpsl - Encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - Sine bar - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid only for neighboring countries). Further accessories available on request. At present, this machine tool does not comply with the fundamental safety and protection requirements as specified in BetrSichV 2015. The necessary minimum safety level must be determined by a risk assessment pursuant to BetrSichV.

Kondisi: bekas, Grinding diameter 250, 350, 450 mm Grinding length 600 mm Centre height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workhead swivelling 360° Grinding head swivelling 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Plunge feed rate 0.001–0.030 mm/Ø Continuous feed rate 0–0.95 mm/Ø Table swivelling ±10° Table longitudinal travel 900 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (unsupported) 130 kg including clamping Internal spindle mount 70 mm Total connected load 6.5 kW Machine weight approx. 2.2 t Required space approx. 3.1 x 2.0 m As a world-leading company in Kellenberger overhauling / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer you service for your machines metric overhauled and newly painted. Version R: Machine features central lubrication and roller guides in the flat bed of the X-axis as well as air lift in the grinding headstock. -Digital readout with 2 axes. Resolution X-axis 0.5 µm Available options at extra cost: -Rotary encoder with digital readout in the workhead -Rotary encoder with digital readout in the grinding headstock (no height adjustment via spindle possible) -New sturdy internal grinding attachment with diameter 80mm or 100mm with height adjustment -Increase in centre height to max. 225 mm Bjdod Ih D Nopfx Afpell -Speed control for the grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories available on request. The machine tool currently does not comply with the fundamental safety and protection requirements as described in the BetrSichV 2015. An increase in the required minimum level of protection is to be determined by a risk assessment in accordance with BetrSichV.

Kondisi: bekas, EN: Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0–40 mm / Ø Continuous feed: 0–40 mm / Ø Table swivelling range: ±6.5° Table longitudinal travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece max. weight (unsupported): 130 kg incl. clamping Maximum transverse movement: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, state-of-the-art and future-proof CNC control. Photo shows a machine already delivered with special options. - Operation via touchscreen panel is extremely user-friendly. - The icons on the control panel are practically identical to the original control, so no re-training is necessary. - Diagnostic function with display of PLC messages and digital I/O - Infeed dressing function can be extended or modified as per customer requirements. - Optional indexed spindle stop for the workpiece spindle available. - New maximum infeed travel: 40 mm (can be further increased on request). Bjdpfouxftrex Afpell - Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment not possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories on request. Machine is equipped with an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal feed and rapid traverse. Highly versatile for external and internal cylindrical grinding, or for external, face and internal grinding of single parts in a single clamping. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - In-process measuring control Please note: At present, the machine does not comply with the essential safety and protection requirements as required under BetrSichV 2015 (German Ordinance on Industrial Safety and Health). An increase of the minimum required safety target must be determined through a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Machine weight approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Bedet Ii Nbepfx Afpoll Mechanically and visually as new Photo shows a recently completed machine with partially different options. Fanuc 21i control system - Grinding head UR 1-2-3 External/Internal/Face grinding - B-axis automatic, 1° Hirth gearing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing system KEL-BALANCE - Left grinding wheel mount: 400 mm diameter - Right grinding wheel mount: 300 mm diameter - Internal grinding attachment with belt drive - Tailstock with micro adjustment - Fine adjustment upper slide - Paper band filter SBP4 240 l

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ± 6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – between centres: 130 kg incl. clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000 mm model. Included: -New control cabinet -Modern workpiece headstock from Advance model -New workpiece spindle drive -Modern hydraulic unit -Pneumatic lifting of the grinding headstock -Modern internal grinding attachment -Operating tools Extension: Upper table swivelling increased to 10° Optional: Bedpfxjd Ih Dwo Afpjll -Upper table swivel angle display -Workpiece headstock swivel angle display -Grinding headstock swivel angle display -Splash guard door for Z-axis -Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: -Machine service -Grinding technology consultation -Operator training -Spare parts -Accessories

Kondisi: bekas, en-1 Bodpod Ih D Rjfx Afpoll

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Blodpfeuxft Eox Afpol Continuous infeed: 0–9.99 mm/Ø Table swivel range: ±10° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (supported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Refurbished as per Kellenberger guidelines, including new, modern, and future-proof control system. Photo shows already delivered machine with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to those of the original controller, so no retraining is required. - Diagnostic function showing PLC messages and digital I/Os. - Dressing function can be expanded or modified as per customer requirements. - Workpiece spindle orientated stop available on request. - New max. infeed amount 40 mm, can be further increased on request. - 2-axis digital readout. x-axis resolution 0.5 µm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increasing centre height to max. 225 mm - Variable speed control for grinding spindle Included: - Operator tools - Drawbar for chuck Further accessories on request. The machine features an electronically controlled infeed system on the x-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Please note: This machine tool does not currently comply with the essential safety and protection requirements as specified in BetrSichV 2015. An increase in the required minimum safety objective must be determined via a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal Bodpfxsuwv H Ho Afpsll 15,000

Kondisi: bekas, Grinding diameter 350 mm Bjdpfx Aouxfupofpsll Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Kondisi: bekas, Tahun pembuatan: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Bljdpfx Asvdk N Esfpjl Centre height: 175 mm Control: Fanuc 310is Completely mechanically overhauled. Including grinding process and setup for one workpiece. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel assembly left: 500 x 80 mm Grinding wheel assembly right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCBN diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing devices KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle for internal and external grinding Provisions for measurement controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant shut-off for table units Fully enclosed for emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: Measuring probe C25 Hydraulic preparation for arbour steady rest

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Bjdpfxed Ih D Hj Afpsll Table swivelling: ±8° Longitudinal movement of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight, max. — between centres: 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required space approx.: 4.2 x 2.0 m Photo: Machine of identical construction shown with centre height 225 mm Version R: Machine equipped with central lubrication and roller guide in the flat way of the X-axis, as well as air lift-off in the grinding headstock. - Digital display on 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (height adjustment using spindle not possible) - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories on request. The machine tool does not currently comply with the basic safety and protection requirements as outlined in the BetrSichV 2015. An assessment of the required minimum protection level must be determined by means of a risk assessment in accordance with BetrSichV.

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit Bledpfxsv I Eq Sj Afpsl - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1982, Grinding diameter: 630 mm Grinding length: 600 mm Centre height: 320 mm Machine equipped with reinforced workpiece spindle head for unsupported grinding of heavy workpieces. The machine undergoes a major maintenance/partial overhaul including geometry inspection protocol in accordance with the Kellenberger new machine directive. Bsdpfx Ajv Dxxzefpsll At present, the machine does not comply with the essential health and safety requirements set out in BetrSichV 2015. An adjustment to the required minimum safety level must be determined by means of a risk assessment as per BetrSichV.

Kondisi: bekas, Tahun pembuatan: 1990, Penyetelan cepat dudukan spindle gerinda dengan bantalan udara Bodpfx Aexbh Ebsfpell

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, emag-wpg7-2024-de-01 Bljdpfx Ajtlrkbofpsl

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. Blsdpfx Ajynmpgefpsl The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Offered is a CNC-controlled universal cylindrical grinding machine, model EMAG Weiss W 11 CNC. The machine is suitable for external, internal, face, and cylindrical grinding tasks. The W 11 CNC cylindrical grinder is ideally suited for single-part, prototype, and series production. It is also utilized in training and maintenance departments. CONTROL SYSTEM Eckelmann TECHNICAL DATA - Maximum workpiece length: 1,500 mm - Center height: 200 mm | Option: 320 mm Bsdpfsr Ey Hujx Afpsll - Workpiece weight: 250 kg - Workhead: Morse taper 4 | Option: Morse taper 5 / 6 - Tailstock: Morse taper 4 TOOL CARRIER Single wheel version, angled or straight; dual wheel with B-axis and internal grinding spindle also available as options. Price, delivery time, and machine configuration upon request.

Kondisi: sangat baik (bekas), Diameter penggerindaan – maks. 175 mm Bsdszxh Tmjpfx Afpoll Deskripsi akan segera tersedia!

Kondisi: sangat baik (bekas), *MESIN PENGASAH UNIVERSIAL AVYAC AU - Dilengkapi dengan pengatur kecepatan R.VASSAL* Mesin pengasah universal AVYAC Tipe AU, dipasang pada dudukan, buatan Prancis. Bsdpfx Aezxhggsfpsll Meja silang, kepala penahan batu gerinda yang dapat diputar, penjepit, pengatur kecepatan elektronik R.VASSAL (putar kanan/kiri + pengaturan kecepatan). Untuk mengasah mata bor, mata obeng, alat pembesaran lubang, dan perkakas lainnya. 380V, tiga fase – Dalam kondisi baik. Video tersedia berdasarkan permintaan.

Kondisi: bekas, Tahun pembuatan: 2003, Diameter penggerindaan – maks. 5–50 mm Panjang penggerindaan 350 mm Panjang benda kerja 50–300 mm Diameter 5–50 mm Daya listrik 70 kVA Pengontrol Siemens Sinumerik 840D Berat mesin sekitar 9 ton Ruang yang dibutuhkan sekitar 3300x2950x2400 m Catu daya: 400 V/ 50 Hz Daya: 70 kVA Sekering: 3X125A Luas penampang konduktor: 5X25 mm² Cu Diameter benda kerja: 5–50 Panjang benda kerja: 50–300 - Pemuatan dan pembongkaran manual - Perangkat pemuatan otomatis eksternal - Spindel benda kerja terpasang secara permanen pada meja penggerindaan Unit spindel benda kerja: Dimensi: 135 x 400 mm Pelumasan: Pelumasan gemuk permanen Segel bantalan: dengan udara bertekanan Penggerak: dengan motor frekuensi tinggi Pemasangan khusus: Junker-Normbund 75 mm Kecepatan putar maks.: 6000 rpm Sentra: Pengaturan memanjang: manual Ujung yang berputar: Junker-Normbund 48 mm (75 mm) Meja penggerindaan: Umpan: Sumbu Z Dudukan spindel penggerindaan: Pendekatan: Sumbu X Pemutaran horizontal: Sumbu B Unit spindel penggerindaan frekuensi tinggi I, II, III Dimensi: 165 x 350 mm Flens: 190 mm Normbund: 127 mm Pelumasan: Pelumasan gemuk permanen Segel bantalan: dengan udara bertekanan Penggerak: 8 kW Penyeimbangan: elektronik Kecepatan putar maks. 8800 rpm Bodpsyan R Nefx Afpell Roda penggerindaan I, II, III Jenis: Borazin (CBN) terikat keramik Diameter: 350 mm Lubang: 127 mm Lebar lapisan: maks. 5 mm (standar) Kecepatan keliling: maks. 140 m/dt

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: Arus searah (DC), lebar total: 550 mm, panjang total: 460 mm, tinggi total: 490 mm, tegangan masuk: 230 V, diameter roda gerinda: 100 mm, berat keseluruhan: 51 kg, frekuensi input: 50 Hz, masa garansi: 12 bulan, daya: 0,375 kW (0,51 hp), kecepatan spindel (maks.): 5.300 rpm, For grinding HSS and carbide engraving cutters, as well as single- or multi-flute end mills in various shapes, such as radius mills or cutters with negative conical angle. The universal index head is adjustable to 24 positions, allowing any specific profile angle to be achieved, with 360° or 10° free rotation permitted for grinding end mills, twist drills, and lathe tools. To change the tool, simply replace the attachment on the index head—no complex assembly required. Standard accessories: 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding attachment ×1 Bljdpfoq E Ry Hox Afpjl Lathe tool grinding attachment ×1 Optional: Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. collet capacity: Ø3 - Ø18 mm Max. grinding diameter: Ø18 mm Conical angle: 0~180° Relief angle: 0~45° Negative angle: 0~25° Speed: 5300 rpm Grinding wheel: Ø100 x 50 x Ø20 mm Motor: 375W Dimensions: 550 x 460 x 490 mm Weight: 51 kg

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: UWIIA/3472/95, Maximum grinding diameter: 300 mm Grinding length: 400 mm Workpiece length: 520 mm Centre height: 150 mm Grinding table travel: 550 mm Table speed - stepless: 0.005 - 5.0 m/min Bedpfx Afjcxxrfspoll Distance between centres: 350 mm Grinding spindle speed, 4 steps: 250/3750/5000/7500 rpm Max. grinding wheel diameter: 250 mm Grinding spindle head swiveling: 11-60° Drive power - spindle motor: max 3.0 kW Total power requirement: 7.7 kW Universal CNC tool grinding machine equipped with SIEMENS 810 G3 control, 4 axes, with electronic handwheel and spindle pitch correction, hydraulic collet chuck FORKART OVERZ-BR, coolant system, automatic central lubrication, enclosure with movable inspection window at the operator station, separate control cabinet, emergency stop switch at the control cabinet, machine lamp, SIEMENS servo drives, in very good condition.

Kondisi: baru, Tahun pembuatan: 2026, de Blodpfx Afsq Nf Uwjpel