Beli Sistem sudut bekas (33)

Kondisi: bekas, Keyway spindle: 1 unit Number of milling units: 5 units Spindle diameter: 50 mm Weinig Unicontrol 11 window production line with extensive tooling Detailed machine descriptions available as PDF attachment ----- Optional available (at additional cost): - Weinig Univar 6 rebate machine - Götzinger PowerDrill drilling and milling center for windows and doors Technical manufacturer’s description: ----- Position 1: Weinig Unicontrol 11 Window Production Line ----- Including available tooling: - IV 67 timber and timber-aluminium - IV 77 timber and timber-aluminium - IV 90 timber Crosscut saw ----- With laser guide, motor power 3 kW, spindle diameter 40 mm, Spindle speed electronically adjustable with brake 3,000–6,000 rpm Axial adjustment: 150 mm via NC axis Radial adjustment pneumatic to 8 positions for edge rounding from above Horizontal rounding unit (bottom) Motor with brake: 1.5 kW, spindle diameter 20 mm, tool clamping length 25 mm, Speed: 9,000 rpm Axial travel mechanically linked to crosscut saw Radial adjustment pneumatic Tenoning and slotting spindle ----- With hydraulically clamped counter bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Maximum tool diameter: 400 mm Tool clamping length: 640 mm Radial adjustment: fixed 1st profiling spindle (climb and conventional milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm Axial travel: 350 mm, NC axis Reference position below table: 5–10 mm 2 feed rollers opposite spindle, axially pneumatic adjustable, 8 positions 2nd profiling spindle ----- Motor power: 11 kW Nodpfx Aoy T R Tusa Uoct Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool clamping length: 400 mm with counter bearing Axial travel: 350 mm, NC axis Reference position below table: 5–10 mm 2 feed rollers opposite spindle, axially pneumatic adjustable, 8 positions Horizontal profiling unit (top) ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Spindle speed: 9,000 rpm Maximum tool diameter: 130 mm Pneumatic adjustment to 8 positions, axial and radial Vertical profiling unit right end of machine ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Spindle speed: 5,850 rpm Maximum tool diameter: 210 mm Pneumatic adjustment to 8 positions, axial and radial Additional equipment ----- CNC length stop, mounted on slotting table For lengths up to 3,500 mm, including positioning crosscut saw integrated in the control system. Studio window device, 60° tiltable to both sides Double-part package with automatic separation and handover Synchronous feed with window automation for rebating Rebating trolley for rebating small sash widths Air conditioning unit in control cabinet PC-based NEXUS control system Automatic turning system Lamella conveyor, including conveyor belt for return transport of workpieces to operator -----

Kondisi: bekas, Keyway spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – Spindles with CNC-controlled radial and axial adjustment --- Technical manufacturer description: Equipped with the following machining units: Cross-cut saw --- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatically to 8 positions for edge rounding from above Edge rounding unit from below --- axial adjustment synchronized with cross-cut saw Tenoning and slotting spindle --- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm tool swing circle min. 380, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial adjustment travel 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Ncsdpfx Ajy T R Thja Ujt 2nd profile spindle --- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top --- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment to 8 positions, axial and radial Vertical profile milling unit, right side at machine end --- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment to 8 positions, axial and radial Additional equipment --- Length stop CNC-controlled, mounted on the slot table for lengths up to 3,500 mm, incl. positioned cross-cut saw integrated in the control system. Studio window setup, swiveling 60° to both sides Double workpiece package with automatic singling and transfer Parallel feed device with window automation for rabbet cutting Rabbet wagon for processing small sash widths Air conditioning unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, including transport belt for returning workpieces to operator --- Price for the above machine on request! --- Tooling option: Window cut profiles – see PDF attachment IV 68 wood, wood/aluminium IV 78 wood, wood/aluminium IV 68 entrance doors --- (technical data as per manufacturer – subject to confirmation) All prices quoted are net, plus VAT.

Kondisi: bekas, Okoma angle combination UF1 S and rebating machine UF2 EG incl. tooling for IV78 wood, IV78 wood front doors, IV78 wood-aluminium windows Gutmann with straight and slanted cheek For sale on behalf of customer ----- Technical manufacturer description: Okoma UF 1 S Slotting and Profiling Machine – Rebating Machine ----- Compact, heavy-duty window production center in cast design, consisting of: Cross-cut saw operating from above with 12 position revolver stops, forced-guided saw guard for accident prevention Slot spindle 40 mm diameter x 252 mm, double stroke for 3 tool positions (stroke height 83 mm), motor 7.5 kW Roller table adjustable on both sides 0-60 degrees automatic feed with various steplessly adjustable speeds, double pneumatic clamping, length stop LAS 3-position system 2300 mm Nodpfsy T R Tbex Aa Uoct automatic transfer to profiling station Profiling spindle 40 mm diameter x 252 mm pneumatic stroke for 2 tool positions 7.5 kW motor, spindle horizontally adjustable to the tool run-off edge, front milling fence jaw adjustable Glazing bead saw with 3 kW motor, 4-position revolver head adjustment, heavy-duty articulated feed stepless 0-25 m/min adjustable, roller sets pivotable inward and outward counterstop with 5-position revolver head frame milling device ----- 1 OKOMA Rebating Automation Model UF 2 EG ----- 1. Power supply: - Operating voltage: 3-phase, 380 V, 50 Hz - Compressed air: Air consumption: 13 NL/min Operating pressure: 8 bar Treated air: per Pneurop 6611 2. Profile Spindle 1: - Spindle position: right - Power: 11 kW - Speed: 7000 rpm - Rotation: clockwise and counterclockwise - Spindle diameter: 40 mm - Usable length: 252 mm - Max. tool diameter: 230 mm - Vertical positioning of profile spindle Drive: pneumatic cylinder 120 mm stroke for 2 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch - Automatic plunge: Plunge speed adjustable for splinter-free rebating - Safety and extraction hood with 140 mm dia. connection 3. Profile Spindle 2: - Spindle position: right - Power: 11 kW - Speed: 7000 rpm - Rotation: counterclockwise - Spindle diameter: 50 mm - Usable length: 272 mm - Max. tool diameter: 230 mm - Vertical positioning of profile spindle Drive: pneumatic cylinder 90 mm stroke for 3 tool positions Position indicator: limit switch - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch - Safety and extraction hood with 140 mm dia. connection 4. Fitting Milling Device EG: - Spindle position: right - Drive: three-phase motor 3 kW - Speed: 6000 rpm - Spindle diameter: 30 mm - Usable length: 47 mm - Vertical positioning: none - Horizontal positioning Drive: pneumatic cylinder, forward-back Position indicator: limit switch (rear only) - Safety and extraction hood with connection 80 mm diameter 5. Stop positioning: - 1st stop: in front of spindle 1 manual chip removal Quick adjustment via parallelogram - 2nd st...

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 83406, Pusat pemrosesan jendela Weinig Unicontrol 10, tahun pembuatan 1998 Nsdpfx Aasy Sxlpj Uect

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Unicontrol 12 Consisting of: Cross-cutting unit (Pos. A), Tenoning and slotting spindle (Pos. C), Transfer conveyor (Pos. I), Profiling spindle (Pos. L), Profiling spindle (Pos. N), Vertical profiling mill right (Pos. P) For the production of individual parts and components, either frame-based or in series production. Comprises a cross machining unit and a longitudinal machining unit connected by a transfer conveyor. Ncsdpfx Aasumci Ss Uot Working width: 40-140 mm (see pressure fence left 40 - 140 mm) Working height: 40-120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal machining: approx. 220 mm + 2 x end profile length Max. workpiece length: 3500 mm The dimensions of the parts depend on the machine configuration, type of production, and tooling setup. Final definition of part dimensions is only possible after receipt, review, and approval of the complete and final tooling layout drawings. Cross machining: Table feed motor power: 0.3 kW (0.4 HP) Feed speed when sawing, profiling, and in return preset: 3-25 m/min Vario table with (possible for studio/architectural window production) The clamping length of all tenoning and slotting spindles can be used without tool change gaps. Workpiece clamping by means of clamping bridge. Operated via a clamping cylinder installed under the table. Length stop NC controlled, mounted on the slotting table. Studio window device swivel angle max.: +/- 75° Minimum workpiece length for angled windows depends on the angle and timber width. Possible part dimensions for angled window production: Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter processing Commission not documented 1) NC angle adjustment automatic for angled part machining Tear-out protection via follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually trackable counter-timber strip for angled part machining. 2) Additional counter timbers

Kondisi: bekas, Dijual mesin beserta semua alat seperti terlihat pada foto. Ncsdpfx Ajy Rumtoa Uet

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled cross-cut saw with laser switching between saw cutting and zero-cut wheel, 3 kW motor Ncjdpfx Asxmr N Ija Uot 2. Grooving spindle 50 x 630 mm for 6 x 80 mm tools, 15 kW motor 3. Longitudinal/profile milling spindle (synchronous) 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle) D = 40 x 40 mm, axially indexed, 3 kW motor 5. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 6. Longitudinal/profile milling spindle 50 x 320 mm for 4 x 80 mm tools, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on right side, 3 kW motor Fittings spindle 40 x 150 mm, 3 kW motor Adjustable feed rate 6-12 m/min, 1.1 kW motor 4-position tool changer Electronic length stop 3600 mm Workpiece return via automatic rotary system Automation package Interval-controlled sash support Double parts package Laminated fabric tabletops (for sanded surfaces) Left-side pressure guide, max. wood width difference 100 mm Machine in very good technical and visual condition

Kondisi: bekas, Tahun pembuatan: 2000, Lokasi gudang: Nattheim Nedpovwdmwjfx Aa Uect

Kondisi: bekas, Tahun pembuatan: 1985, Berat: sekitar 3000 kg Dimensi: sekitar 3700 x 2000 x 1600 mm Lokasi penyimpanan: Nattheim Ncsdpfovvi Ttsx Aa Uet

Kondisi: baik (bekas), 0321-SCM-MULTIFLEXC-EN-DE Ncodpfx Aoytn U Iea Ujt

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, GUBISCH Centromat CW3 mesin bekas untuk pembuatan jendela dan pintu dengan poros Ø 50 mm pada pemprofilan memanjang Komponen berikut sudah diperbarui: Kabel energi dan kabel listrik ke meja slot Mat peredam pada pelindung Selang pneumatik Bantalan untuk piringan kontra Sisi penyambung di area memanjang Encoder putar untuk spindle slot kedua Bantalan untuk meja slot Njdjxgqluepfx Aa Usct PC telah dibersihkan dan dicek Berbagai silinder pneumatik Sabuk V

Kondisi: bekas, Slot spindle, 1 unit Number of milling units: 1 unit Spindle diameter: 40 mm Small window production line consisting of: ----- 1) Haberkorn FZS1 slot mortiser. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4,000 3) Oertli tooling for Haberkorn and Okoma machine. Price: €7,500 Timber window tool set IV 68/78/88 and timber-aluminium window tool set IV 68/78, year 2011 4) Götzinger OBM Plus corner hinge and handle drilling machine, for Maco MultiMatic hardware. Price: €7,000 (Hardware can be changed for a surcharge upon request!) ----- Technical Manufacturer Description: - Haberkorn FZS1 slot mortiser with automatic feed - Stepless height adjustment, D 40 mm Crosscut saw: - Spindle mounting: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2,800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning: pneumatic, manually adjustable - Safety and extraction hood with suction port diameter: 100 mm Slot spindle D 40 mm: - Power: 7.5 kW - Speed: 4,200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via precision recirculating ball screw - Safety and extraction hood with suction port diameter: 180 mm - Automatic brake with speed monitoring Swing table: - Swivel range: +/- 65° - Automatic counter block change (programmable) - Pneumatic clamp - High-precision electronic degree display - Automatic length compensation - Counter block in the cutting plane at every angle setting Special equipment: - Laser for workpiece positioning - Pneumatic saw positioning - Length stop LA 2,500 mm + 1,850 mm extension ----- 2) Okoma SF3F table milling machine with vertical spindle, 3 tools - Suction port connectors: 2 x 120 mm - Spindle length: 270 mm - Fence with fine adjustment and turret head - Triple stroke, max. lift height 90 mm - Glazing bead separating saw with safety and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for glazing bead saw setup - Pneumatic notching device, electronically controlled for edge gear, speed 6,000 rpm - 2 x 3 kW motors - Mounting diameter: 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set wooden window IV 68/78/88 - 1 set timber-aluminium window IV 68/78 Tools are sold in the condition, scope, and with accessories as available at our warehouse. Note regarding window profiles, tool drawings, tool system lists: Fa. Engelfried provides no guarantee that the tools actually available correspond to the named or illustrated systems. ----- 4) Götzinger OBM Plus corner hinge and handle drilling machine - Corner and scissor stay + handle drilling - Vertical drilling unit with: - Quick change drill head Ncjdpfxoxa Hi Ns Aa Uet - Pneumatic feed via foot pedal - 1 x handle drill head, 24 mm - 1 x double head corner bearing - Maco MultiMatic hardware - 1 x adjustable folding stop left with 6 stops - 1 x adjustable folding stop right with 6 stops - 1 x machine stand complete with storage shelf - 220/400 V, 60 Hz, 1.3 kW - 1 x roller track approx. 1 m long with 2 rollers - 1 x roller track approx. 1.5 m long with 3 rollers ----- Price of the ...

Kondisi: bekas, Tahun pembuatan: 1993, Peralatan IV 68, 78 dan perlindungan bangunan bersejarah. Spindel bor dan slot untuk 3 alat, motor 7,5 kW. Spindel profil untuk 3 alat, motor 5,5 kW. Nodpfsy Hrrxjx Aa Ujct

Kondisi: baik (bekas), Tahun pembuatan: 1980, mesin pelubang bermerek Okoma kondisinya terawat dengan baik, spindle ukuran 40 Ncedpfx Aaoxvllzj Uet

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Nice machine in good condition, as it comes from a small business and has seen little use. Includes IV 68 tool. Still available for demonstration in operation. Nsdpfx Asu S Afcja Uoct

Kondisi: bekas, Tahun pembuatan: 2004, Slotting spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of customer. Machine connected and available for demonstration. Including used window tooling for Unicontrol 12, Njdpfx Aasyyqm Ij Uect OERTLI, various wood thicknesses ----- Brief summary: ----- - 2 slotting spindles, each 640 mm long, CNC controlled - Variotisch - 3 profiling spindles, each 400 mm long, CNC controlled - Fitting spindle + grooving units, top and bottom - Includes used window tooling for Unicontrol 12, OERTLI, various wood thicknesses and systems programmed and set up (see attached PDF) Detailed description: ----- Crosscut saw ----- Crosscut saw electronic, stepless horizontal adjustment Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40 mm Maximum tool diameter: 400 mm Motor power: 3 kW Laser alignment light for identifying the saw section Rounding unit ----- Position: horizontal, below Motor power: 1 kW Spindle diameter: 20 mm Spindle speed: 9000 rpm Maximum tool swing diameter: 130 mm electronic length stop, length: 3500 mm ----- 1st tenoning and slotting spindle ----- Number of tools: variable, CNC controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50 mm Maximum tool diameter: 380 mm Motor power: 15 kW 2nd tenoning and slotting spindle ----- Number of tools: variable, CNC controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50 mm Maximum tool diameter: 380 mm Motor power: 15 kW 1st profiling spindle ----- Position: vertical right Number of tools: variable, CNC controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC controlled Horizontal spindle stroke: variable, CNC controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool swing diameter: 232 mm Motor power: 11 kW 2nd profiling spindle ----- Position: vertical right Number of tools: variable, CNC controlled Tool clamping length: 400 mm with top bearing Vertical spindle stroke: variable, CNC controlled Horizontal spindle stroke: variable, CNC controlled Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool swing diameter: 232 mm Motor power: 11 kW 3rd profiling spindle ----- Position: horizontal top...

Kondisi: sangat baik (bekas), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, Year 1997 - Crosscut saw, pneumatically indexed (3 kW) with laser guide light - Grooving spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW - Parallel spindle 50 x 120 mm – motor 7.5 kW - Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW - Fitting spindle, pneumatically indexed 40 x 160 mm – motor 3 kW - Sawing / grooving spindle, horizontal top, pneumatically indexed – motor 3 kW - Feed speed adjustable from 6 to 12 m/min – motor 1.1 kW - Screen control for 99 window types - Support bar for sash bar production, pneumatically indexed - Picture window unit with digital angle display - Length stop up to approx. 3,500 mm - Perimeter milling device with support rail - Return conveyor to operator side - Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ Tooling Set, IV-78 THE MACHINE IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Ncsdpfx Aasy Dud Es Ujt Delivery: EXW Delivery time: short-term by arrangement Inspection: by appointment Payment: upon notification of readiness for dispatch Errors and prior sale excepted.

Kondisi: bekas, Tahun pembuatan: 2004, Slot spindle 2 pcs Number of milling units: 7 pcs Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial NC spindles and VARIO table ..... Machine has already been professionally dismantled and stored in 73447 Oberkochen Technical Data Summary (possibly included additional accessories available upon request) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 3,000–6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for cut section identification > Axial adjustment range 150 mm, NC axis, electronically stepless > Radial adjustment range pneumatic, 8 positions, e.g. for top edge rounding Ncodpfeyrtzkox Aa Ujt Rounding Unit ..... > Position: horizontal, bottom > Axial adjustment together with the cross-cut saw. Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered 2nd Tenoning and Slotting Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm, NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Synchronous counter pressure, full clamping length is countered Transfer belt ..... For transfer of parts to longitudinal processing, including double part separation before infeed to the longitudinal machining section. 1st Profiling Spindle (Climb and Conventional Milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 2nd Profiling Spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range: 350 mm, NC axis, stepless > Radial adjustment range: 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool cutting diameter: 140 mm > Max. tool cutting diameter: 232 mm 3rd Profile Milling Unit (Grooving device from above) ..... > Position: horizontal top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range: 30 mm, NC axis, stepless > Radial adjustment range: 125 mm, NC axis, stepless > Spindle speed: ...

Kondisi: bekas, Tahun pembuatan: 2006, machineseeker-1345 Nsdpfxsyn R Imo Aa Ujct

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm #2809 Weinig Unicontrol 6 ----- Technical Data Overview (Additional included accessories upon request) Item 1: Cross-cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for detection of the saw section Length stop, CNC-controlled ----- > Length: 3,600 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and Slotting Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st Profiling Spindle (Climb and Conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle stroke vertical pneumatic: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for manufacturing narrow, short parts (e.g. glazing bars) Muntin guide consisting of: Muntin support rail from above in the area of the vertical right profile milling unit and profiling spindle. Item 5: Profile Milling Unit Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment path: 52 mm, indexed to 2 positions > Radial adjustment path: 125 mm, indexed to 2 positions Item 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment path: 90 mm, indexed to 3 positions > Radial adjustment path: 100 mm, indexed to 2 positions > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electrically adjustable feed height incl. mechanical digital readout and manual feed beam clamping > Rebate unit for tear-free rebating > Dual part package > Return conveyor for single-operator handling: pivoting belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction connection diameters: ----- Cross-cut saw: 80 mm Slot spindle: 140 mm Profile spindle 1: 140 mm Profile spindle 2: 140 mm Ncedpfx Aaextvgkj Ujt Grooving unit, top...

Kondisi: baik (bekas), Dijual unit sudut kecil FUNK Gergaji potong dengan penahan revolver Nedoyuw Tijpfx Aa Ujct Poros slot 40mm dengan gerak ganda Umfälzer 40mm dengan gerak ganda dan perangkat pengumpan besar Gergaji lis kaca dilengkapi juga dengan satu set alat jendela IV68

Kondisi: bekas, Aggregate 10 Spindle diameter 40 and 50 mm Motor: 1x15 kW, 4x11 kW, 5x3 kW Weinig Unicontrol 10 (UC 10) angle processing centre for the production of windows, components, and doors. Suitable for batch, series, or single-part production with 2 tenoning and mortising spindles, incl. Oertli tooling set. - Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit (top), 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm Nodpfx Aajv Ag Tdj Uect 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Vertical profiling unit, right, 3 kW 9. Vertical profiling unit, right from above, 3 kW 10. Horizontal profiling unit (bottom), NC axis, 3 kW - Double-part package - Rebating package with rebating carriage - Automatic turning system - PC control NEXUS - CNC-controlled length stop - Studio window device - Edging unit from below with cross-cut saw - Mullion support bar - Incl. extraction duct system - Incl. Oertli tooling set - Further technical data and tooling drawings available on request.

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures Nedpfx Aajx Nqqxo Uoct * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Nsdpfx Asx Tu N Hja Uect Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, Mesin pembuat jendela Pabrikan: Okoma Tipe: UF1 S Ncedpfxsyk Haqj Aa Uet Tahun: 1988 dengan alat