Beli Brt Hartner Gmbh Hp5-3035 bekas (69.747)

Tahun pembuatan: 2025, Kondisi: baru, Transport trailer Payload: 6,000 kg Length: 4,000 mm Width: 1,600 mm Height: 540 mm Turntable steering Podpfxehwna As Adijpw Rigid trailing axle Transport floor: 27 mm wood Tyres: 415 x 100 solid rubber with steel rims Paint finish: RAL 2000 Drawbar with 40 mm towing eye and safety catch

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, kapasitas angkut: 5.000 kg, ketebalan garpu: 80 mm, lebar garpu: 180 mm, Telescopic crane 5,000 kg at a load center of 600 mm Telescopic length at hook: 3,600 mm with 950 kg payload Load capacities at various load centers: see load chart One swivel hook with 5,000 kg capacity including shackle One swivel hook with 3,000 kg capacity including shackle Ppjdpfx Aoiuh I Aedijw Height adjustable via locking increments Electrogalvanized pins secured with cable Entry pockets for fork tines up to 180 x 80 mm Safety chain to prevent crane slippage

Kondisi: baru, Tahun pembuatan: 2025, daya: 5 kW (6,80 hp), SAPI premium pressure blasting unit, 200 liters, with cyclone cleaner and abrasive vacuum system for abrasive recycling. This blasting system offers a cost-effective, highly economical, and efficient solution for open blasting operations with semi-automatic abrasive recycling. Ppedpjwc Rcnsfx Adiow Open blasting system for manual sandblasting of various types of workpieces, operated by one blasting operator with integrated abrasive recycling. After blasting, the abrasive media is manually collected and pushed into the floor-mounted collection hopper. The abrasive vacuum draws the media from the hopper, passing it through the cyclone cleaner. In this process, dust is extracted and collected in the vacuum’s dust container; coarse debris is separated via a screen. The cleaned abrasive then returns to the ventilated pressure blast vessel, making it available for reuse. Our SAPI safety shutoff ensures a safe and economically efficient blasting process. Remote control allows the operator to start and stop the blast vessel using a hand lever mounted on the blast hose assembly. This is a highly economical and efficient solution for open-blasting tasks with semi-automatic abrasive recycling. Scope of supply includes: - SAPI Premium blast vessel, 200 liters with 1 1/4" piping, pressure regulated from 0.1 – 12 bar, maximum operating pressure 12 bar - High-performance water separator 1 1/4", permanently mounted to the unit - SAPI safety shutoff - Cyclone cleaner for abrasive recycling with lifting device - Abrasive media sieve (insert sieve for the blast vessel hopper) - Filling hopper 500x500x380 mm - 4 m connection hose from filling hopper to cyclone cleaner - 3 m connection hose from cyclone cleaner to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling - Boron carbide Venturi long nozzle (optionally 6 mm, 8 mm, or 10 mm diameter)

Kondisi: baru, Tahun pembuatan: 2025, tekanan: 12 batang, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that collects all dust and removed materials during operation. This not only eliminates the need for extensive cleaning work, but also protects the operator and those nearby from the harmful effects of airborne particles. Pedpfx Aeupzn Eediopw With a dust-free sandblasting machine, you can clean and prepare surfaces more quickly and efficiently. Thanks to intuitive controls and a user-friendly design, these machines are easy to operate even for sandblasting beginners. ✅ PR 50 Dust-Free Sandblasting Machine With its versatile applications, the PR 50 can treat a wide range of surfaces, from hard metal to delicate glass. Our PR 50 is an excellent choice for anyone working in the automotive, construction, or cleaning industries, to name just a few. Thanks to its compact size and handy design, it is easy to operate and transport—even for those new to sandblasting.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: pencahayaan, The requirements for modern paint booths and drying rooms have increased significantly. New paint systems, such as water-based paints, polyurethane resins, and epoxy coatings, demand advanced system solutions. Workpiece transport plays a key role. Our engineers provide you with tailor-made advice. Whether it’s dry overspray extraction, wet scrubbing, air humidification, or air drying – we offer solutions for every need. Components of a modern paint booth: Paint booth: The core of the system, equipped with advanced air filtration systems and ventilation for dust-free painting. 🎨 Air handling unit: It ensures a consistent air balance in the spray booth by supplying filtered air. 🌬️ Exhaust system: Removes overspray and volatile organic compounds (VOCs) to maintain air quality. 🌿 Drying and curing oven: After coating, parts are placed in the oven to achieve a long-lasting, high-quality finish. 🔥 Conveyor system: The automated conveyor system efficiently transports components from the spray area to the oven. 🚜 Control panel: The control center of the system for managing everything from temperature to conveyor speed. ⚙️ Lighting: Energy-efficient LED lighting ensures optimal visibility and saves electricity. 💡 Why choose our paint booths: Quality: Our systems are meticulously engineered to guarantee maximum efficiency and performance. 🎯 Safety first: Efficient extraction systems, fire protection equipment, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We provide tailor-made solutions for your specific requirements. 🛠️ Ease of maintenance: Our booths are easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent support: Technical support for installation and maintenance ensures your system always operates optimally. 🧰 Environmental responsibility: Energy-efficient systems and eco-friendly technologies ensure clean and sustainable surface treatment. 🌍 Complete solutions for paint booths: Conveyor systems: Psdeun R Ufepfx Adiopw Automated transport systems for painting and blasting halls, with crossings and switch points for components up to 2000 kg. 🚛 Easy filter replacement: Paint booths with ceiling extraction and easily replaceable filter elements. 🧹 Heating and drying options: A wide range of drying solutions: oil or gas heating, heat recovery, and activated carbon filters for higher solvent levels. 🌡️ Integrated paint supply system: Airless pumps for supplying paint throughout the entire booth. 🎨 Our turnkey solutions provide everything you need for efficient and safe painting. Let our specialists advise you to optimize your custom spray booth!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, lebar total: 2.438 mm, tinggi total: 2.896 mm, panjang total: 6.058 mm, berat keseluruhan: 3.300 kg, berat benda kerja (maks.): 5.000 kg, luas filter: 40 m², kapasitas tangki: 200 l, Perlengkapan: pencahayaan, Robust high-cube container made of Corten steel – windproof and waterproof, service life ≥ 30 years We present a unique innovation: a premium-quality high-cube container suitable for both indoor and outdoor use. Constructed from durable Corten steel, this container ensures a minimum service life of 30 years. The unit is fully sealed, weatherproof, and waterproof. Included is a premium 200 pressure blasting unit with manual media reclamation—the device operates with all common reusable blasting abrasives and is equipped with an integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). The container also comes pre-installed with electrical wiring and LED lighting. Ideal for a wide range of applications—robust, secure, and immediately ready for operation! Perfect for indoor and outdoor installation: Corten steel + high-cube format Low-noise and low-dust working environment thanks to filter system and LED lighting This container can also be rented or leased (e.g., leasing from €475/month). Transport can also be arranged on request at current daily rates. If you have questions or are interested, please do not hesitate to contact me! Should you require further details or a quotation, feel free to reach out directly at any time—I am here to help! We also offer hire-purchase and leasing options for this blasting container. For enquiries or to request a quote, please contact Mr. Andreas Wallner at any time. Ppjdpfx Adsuiwu Heiow Relevant search terms: sandblasting container, mobile blasting container, 20-foot HC, high-cube sandblasting system, SAPI, container blast cabin, mobile pressure blast cabin, sandblasting system in container, industrial blast cabin, Corten steel cabin

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SAPI Jumbo, tekanan: 12 batang, lebar total: 3.087 mm, tinggi total: 2.078 mm, panjang total: 3.692 mm, berat keseluruhan: 3.000 kg, lebar dalam: 2.340 mm, panjang dalam: 3.520 mm, tinggi dalam: 2.500 mm, berat benda kerja (maks.): 500 kg, luas filter: 20 m², Perlengkapan: pencahayaan, This fully operational, assembled, walk-in JUMBO blasting cabin offers a comprehensive solution for efficient blasting operations. Equipped with 2 LED blast chamber lights, it ensures optimal illumination of the work area. The double-winged door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s service life. For air filtration and dust reduction, the cabin is fitted with a powerful cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor with grating cover provides automatic recovery of the blasting media, and the electrically powered drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance media reclaimer to efficiently process and reuse the blasting media. The pressure blast vessel with a capacity of 38 liters offers sufficient volume for extended work cycles. The scope of delivery also includes a 10-metre blasting hose and a durable boron carbide nozzle, ensuring optimal blasting results. This blasting cabin is ideally suited for companies seeking a reliable and efficient solution for blasting applications. Pjdpfx Adjukdfpeijpw *Special equipment such as loading trolleys is also available on request* Compressed air and electrical supply, as well as installation, are to be provided by the customer. If we have aroused your interest, please feel free to contact us at any time!

Kondisi: baru, The perfect coating for long-lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder consisting of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is essential for the powder to bond effectively with the substrate and to achieve a robust, long-lasting finish. Components of a Powder Coating System A powder coating plant typically consists of various components and equipment required for the application and curing of powder coatings. Spray Booth and Application Area The booth provides a clean environment for the application process and ensures even distribution of the powder. Powder Coating Gun A powder coating gun is used to apply the powder coating material to the workpiece. Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to convey the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before powder coating application. This includes processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimum adhesion and coating durability. Curing Oven A curing oven is an essential part of a powder coating system. It is used to heat the coated substrate to the proper temperature, allowing the powder coating to melt, flow, and harden into a durable surface. The oven typically features a conveyor system or racks to transport coated parts through the oven chamber. Extraction System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents powder particle accumulation in the air. Pedpfjun Sd Usx Adiopw Looking for a powder coating solution? Are you searching for a tailored powder coating system? We specialize in delivering custom powder coating solutions tailored to your specific requirements. Whether you have particular color specifications, intricate designs, or challenging substrates, our experienced team is ready to deliver exceptional results. Contact us today to discuss your requirements and let us design a bespoke powder coating solution for you. Get in touch with us today!

Kondisi: baru, Tahun pembuatan: 2025, Innovative dust-free sandblasting machines combine the performance of conventional sandblasting with a vacuum system that captures all dust and removed material during operation. This not only eliminates the need for extensive cleaning work, but also protects the operator and people nearby from the harmful effects of airborne particles. With a dust-free sandblasting device, you can carry out cleaning and surface preparation faster and more efficiently. Thanks to intuitive controls and user-friendly design, these machines are also easy to operate, even for beginners. ✅ DINO II & DINO MASTER Psdpfswc Rg Hjx Adiepw Available in 60 and 100 litre versions The SAPI "DINO" pressure vacuum sandblasting machine is a compact and universally applicable unit, featuring a robust construction and high mobility. The blasting performance depends on various factors such as surface condition, compressor capacity, type of abrasive, etc. The cleaning capacity ranges from 3 to 10 m² per hour. Overall, this device offers the operator a clean working environment, low abrasive consumption (thanks to the vacuum recovery unit), and reduced disposal costs. The unit is used in the steel, shipbuilding, and oil industries, as well as for maintenance work in the construction sector, by stonemasons, and more.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Our SAPI Blast Rooms SAPI blast rooms and systems—backed by 50 years of tradition and proven quality—are designed for industrial and commercial applications, providing a safe environment for all types of blasting operations. Each hall includes a blast chamber, an abrasive recovery system with filter and de-dusting unit, lighting, and comprehensive safety features to ensure operator protection. Abrasive Recovery System Our recovery system collects, separates, and recycles blasting media, reducing both costs and environmental impact. Ventilation and filtration systems keep air inside the hall clean, while powerful lighting offers optimal visibility for operators. Key components of our SAPI blast rooms: ✅ Blast Chamber: The central zone where blasting operations are performed. 🌬️ Ventilation and Filtration Systems: Reduce dust load and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles abrasive media, minimising costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency stop functions, fire protection, and operator gear such as helmets, overalls, and gloves. ⚙️ Control Cabinet: Central control unit for all electrical components. 🗑️ Dust Collection Bin: Collects fine media for easy disposal. 🛠️ Compressor: High-performance compressor for air supply. 💪 Mammut Blasting Unit: Engineered for demanding industrial applications. Reasons to choose our blast rooms: ✅ High Efficiency: Increased productivity and reduced operating costs. 🛡️ Safe, Clean Environment: Minimised environmental impact and maximised work safety. ⚙️ Customisable Solutions: Tailored solutions for optimum performance. 🔧 Premium Components: Durable parts meaning less maintenance required. 🛠️ Support & Service: Expert assistance for rapid trouble-shooting. 🌱 Environmental Responsibility: Lower waste and reduced ecological footprint. Ppedpfxeun R N Aj Adiow The SAPI Flat Conveyor System: Abrasive media are processed via our high-efficiency abrasive cleaner, which separates out contaminants. This system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit, requiring minimal foundation work for installation on existing hall floors. Advantages of our flat conveyor system: ✅ Shallow installation depth, retrofittable in existing blast rooms 🔇 Low noise and friction operation ⚡ Extremely low energy consumption 🏗️ Significantly reduced wear, as only rubber is used 🚧 Very low installation height

Kondisi: baru, Perlengkapan: pencahayaan, Take your painting process to the next level – with mobile convenience. Mobile paint booths in container design for painting and coating a wide variety of objects. They are specifically engineered for mobility, allowing for easy transport and rapid deployment on different worksites. The cabin is typically equipped with a ventilation system to ensure air quality, integrated lighting, and a filtration system that prevents paint mist from escaping. The ventilation system ensures that vapors and particles released during painting are contained within the booth, eliminating any risk to the surrounding environment. Mobile paint booths provide a practical and flexible solution for companies that need a relocatable, effective painting system, easily transported from one construction site to the next. Overview of design and features Our mobile 20-foot Sapi painting containers feature a robust steel framework with welded wall and ceiling panels. Inside, we can install specialized equipment such as cranes or lifting devices. The floor is made from checkered steel plate. Both door panels include ventilation grilles fitted with fine-pore filter mats. One panel is designed as an escape door for safety reasons and features a viewing window. It is important to note that these are not simply converted shipping containers—we manufacture all our containers from the ground up, using only the most durable materials that meet all requirements and have been tested and proven for safety. Standard shipping containers would not meet the required safety standards. Paint mist extraction system in the mobile painting container The paint mist extraction wall for overspray separation is installed in front of the rear wall and equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with guide plates, including various hanging and fastening elements for filter installation. On the exterior rear side of the container, a high-performance, ATEX-certified extraction fan with drive motor is installed on a mounting console. Podpfoun Shgjx Adiopw Next-generation mobile paint booths: meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU standards. Accommodating modern coatings such as water-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica coatings imposes stringent requirements on existing painting booths. This is why we have developed a new and unique mobile paint booth to support the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Need more information? Our engineers can provide expert advice and support. Whether you require dry paint mist separation or wet scrubbing, humidification or air drying, condensation drying using low-temperature techniques or hot air drying, or pre-treatment of workpieces by high-pressure washing with water recirculation, compressed air blasting, or turbine wheel blasting technology, we offer the optimal solution.

Kondisi: bekas, Fungsionalitas: belum diuji, Mesin pengelasan ultrasonik Tipe Ecoline 20L Podpfx Adezlchlsiopw - Generator ultrasonik K5 2000W/20kHz - Pengiriman dapat dilakukan dengan biaya tambahan.

Tahun pembuatan: 2008, Kondisi: baik (bekas), Lini ekstruder dari Kuhne ini disimpan di gudang mesin Plastima Used Machinery. Mesin ini berasal dari tahun 2008 dan dalam kondisi sangat baik. Merek: Kuhne GmbH Model: K 60E - 33D Tipe Sekrup: sekrup tunggal Tahun pembuatan: 2008 Diameter sekrup Ø: 600 mm Rasio L/D: 33 Tinggi silinder: 425 mm Ppsdpfx Aeyxn T Njdisw Tinggi kerucut: 325 mm Tinggi total: 750 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Throughfeed Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm Ppodpfxjwxza Ns Adiew Includes control cabinet Cabinet dimensions: 1200 mm x 600 mm x 2100 mm

Kondisi: baru, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KR 210 R2700 prime, Alapadatok KR 210 R2700 prime Tengelyek száma: 6 Vezérelt tengelyek száma: 6 Munkatérfogat: 55 m³ Pozícióismétlési pontosság (ISO 9283): ± 0,06 mm Tömeg: kb. 1111 kg Névleges teherbírás: 210 kg Maximális kinyúlás: 2696 mm Védettségi fokozat: IP65 Védettségi fokozat, csukló: IP65 Zajszint: < 75 dB (A) Szerelési pozíció: padlóra Helyigény: 830 mm x 830 mm Megengedett dőlésszög: ≤ 5 ° Alapszín: Alváz fekete (RAL 9005), mozgatott részek KUKA narancssárga 2567 Vezérlőegység: KR C4 Transzformációs elnevezés KR C4: KR210R2700 PRIME C4 FLR Podpoyl Ux Defx Adiopw Üreges tengely átmérője A1: 139 mm (részben elfoglalva motorkábelekkel) Páratartalom osztály (EN 60204): - Környezeti feltételek besorolása (EN 60721-3-3): 3K3 Környezeti hőmérséklet Üzem közben: 10 °C – 55 °C (283 K – 328 K) Tárolás/szállítás: -40 °C – 60 °C (233 K – 333 K) Tengelyadatok, KR 210 R2700 prime Mozgástartományok: A1 ±185 ° A2 -140 ° / -5 ° A3 -120 ° / 155 ° A4 ±350 ° A5 ±122,5 ° A6 ±350 ° Sebesség névleges teher mellett: A1: 105 °/s A2: 107 °/s A3: 114 °/s A4: 136 °/s A5: 129 °/s A6: 206 °/s Teherbírások, KR 210 R2700 prime Névleges teherbírás: 210 kg Névleges tehetetlenségi nyomaték: 105 kgm² Névleges teljes terhelés: - Névleges kiegészítő terhelés, alváz: - Maximális kiegészítő terhelés, alváz: - Névleges kiegészítő terhelés, forgóoszlop: - Maximális kiegészítő terhelés, forgóoszlop: 300 kg Névleges kiegészítő terhelés, kar: - Maximális kiegészítő terhelés, kar: 130 kg Névleges kiegészítő terhelés, kar: 50 kg Maximális kiegészítő terhelés, kar: 150 kg Névleges terhelés súlyponttávolsága: Lxy: 270 mm Lz: 240 mm A teherbírások és kiegészítő terhelések túllépése a robot élettartamának csökkenéséhez, valamint a motorok és a hajtóművek túlterheléséhez vezethet. Mindig javasolt az adott alkalmazás KUKA.Load szoftverrel történő tesztelése. Egyedi értékek túllépése esetén a KUKA Roboter GmbH bevonása szükséges.

Kondisi: bekas, Tahun pembuatan: 2015, Detail teknis: Jarak sumbu x: 600 mm Jarak sumbu y: 400 mm Jarak sumbu z: 500 mm Kontrol: Mitsubishi M70 Ukuran meja: 2 × 700 × 400 mm Kapasitas beban meja: 2 × 250 kg Tipe holder alat: SK40 / ISO40 Ppodozgu Aqepfx Adisw Kecepatan putar: 12.000 rpm Magazin alat dengan: 24 tempat (+1 posisi pergantian alat) Kebutuhan daya total: 25 kW Berat mesin sekitar: 6,6 t

Kondisi: bekas, Tahun pembuatan: 2012, Automated system / Application areas: chrome plating, nickel plating, copper plating / Programs: pre-cleaning, pretreatment, metallization, post-treatment / Base materials: ABS and ABS-PC / Technical data: goods window per goods carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per goods carrier, cycle time 3.00 min. system, cycle time 2.50 min. demetallization / Capacity: 20 goods carriers per hour, clear distance anode/anode chrome 700 mm, copper 700 mm, nickel 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm width, tank dimensions (rinsing) 3100 mm x 700 mm, / Power consumption: drives: transport system 133 kW, filters 194 kW, exhaust ventilation 229 kW, wastewater treatment 150 kW, switchgear 704 kW, rectifiers approx. 3190 kW, heating energy approx. 1410 kW / Consisting of: automatic loading system with 135 goods carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, plating baths, and exhaust air system made of chemically resistant plastics, NOTE: Various continuous extensions and modernizations of the plastics electroplating plant since 2015! Ppodpfxey Rvtuj Adiew

Kondisi: bekas, KB Prüftechnik Hardness Tester Type: KB 750 BVRZ Machine type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for fully automatic and standards-compliant hardness testing. Suitable for all hardness test methods within the load range HV 0.2 – 1 to 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics), and depth measurement as per Vickers and Brinell. Fully automatic test cycle, evaluation of impressions with the built-in LCD monitor using the integrated video camera and zoom lens, ensuring highest standard-compliant evaluation accuracy. All hardness values are displayed digitally in real time. User-friendly and powerful control panel with color LCD monitor, high contrast and glare-free. Impression measurement is parallax-free. Test forces are electronically controlled and applied with utmost precision. The video image can optionally be exported as a BMP file. All KB hardness testers are supplied with a basic package enabling immediate operation with ordered indenters. A selection of fixtures, test tables, indenters, objectives, reference hardness blocks, etc. is available. Connection to a PC or central computer is possible with all KB hardness testers. With automation software and motorized cross table, the machine can be operated as a fully automatic system. Features: - Fully automatic test cycle - Optical evaluation using integrated video analysis - Extremely user-friendly and high performance - Large color LCD display - Industrial membrane keyboard - Variable software adaptation - 1:7 zoom lens - Parallax-free measurement - Force transducers, controlled load application, LED illumination - Rockwell resolution 0.025 HRC - Extremely high performance - 200 freely programmable test sequences - Calibrated machine accuracy (optional) - Innovative LED ringlight (optional) - Automatic image evaluation (optional) - 2 interfaces, parallel and serial, plus keyboard connection - Extended XL load range (optional) - Freely switchable language selection - German, English, French, Italian KB750 BVRZ: Test load 3–750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Super Rockwell Test table diameter 80 mm Motor zoom 1:7 Objective 4x for HV10-HB5/750 NOT suitable for HV5 Operating functions: Programmable digital panel with the following features: - Impression measurement on LCD display with movable measuring markers, parallax-free - Logically structured, simple menu navigation - Creation and storage of up to 200 test programs - Automatic load selection based on test method - Freely selectable application times for test load - Freely selectable holding times for test load Psdpfxezg Tyuj Adijpw - Online help - Automatic correction for curved surfaces in accordance with DIN EN ISO - Control of fully automatic test cycle - Direct digital hardness value display - Tolerance indication - Conversion according to DIN 50150 Table B1 - Report generation in DIN A4 format with standard printer via parallel interface - Serial interface for data output to PC - Network option - 4 languages: German, English, French, Italian - Statistical functions, such as: - Number of tests - Min/Max - Mean value - Range - Standard deviation - cp/cpk - Histogram (Subject to changes and errors in technical specifications– all data is non-binding!)

Tahun pembuatan: 1995, Kondisi: baik (bekas), Mesin penyegel baki Dyno Industrier yang andal, diproduksi di Norwegia. Cocok untuk daging, ikan, unggas, makanan siap saji, keju, dan produk makanan lainnya yang memerlukan pengemasan vakum atau Pengemasan Atmosfer Termodifikasi (MAP). Ppjdpozkwd Sofx Adiew Spesifikasi Model: DYNO 320VG / 321VG Kemampuan vakum + MAP (pengisian gas) Berfungsi penuh dan saat ini dalam proses produksi Pengoperasian semi-otomatis Cetakan baki 4-rongga terpasang Sistem gulungan film disertakan Buku panduan pengoperasian asli disertakan Panel kontrol Pilz Dirawat dengan baik dan siap digunakan segera Ideal untuk Perusahaan pengolahan daging Perusahaan makanan laut Produsen makanan ringan Produsen makanan siap saji Fasilitas produksi makanan kecil dan menengah Mesin dapat diperiksa saat beroperasi dan didemonstrasikan kepada calon pembeli yang serius. Beberapa cetakan tersedia.

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2026-078, lebar kerja: 1.600 mm, tinggi kerja: 100 mm, lebar pemotongan (maks.): 1.600 mm, jumlah slot dalam magazin alat: 2, Used machine CNC Cutter/Plotter Cutting area in X and Y: 1,500 x 1,600 mm (demonstration unit) Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head • Multifunctional tool head capable of holding 2 interchangeable tools • High-performance vacuum blower for material fixation • Equipped as standard with grey conveyor belt table • Maximum material height: 100mm Additional tools available (on request): • EOT Electric Oscillating Tool • POT Pneumatic Oscillating Tool • PRT Driven Rotary Tool • UCT Universal Cutting Tool (drag knife) • KCT Kiss-Cut Tool • CTT Creasing Tool • V-Cut, angle-cutting knife • Printed mark detection • Camera registration • Punch tool for notches or holes • Milling unit with extraction system User-friendly • Easily interchangeable cutting tools, “PLUG & CUT” • Intuitive user interface • Quick blade replacement • Vacuum zones can be activated at the click of a button Rapid ROI • Low costs with high added value • Optimal material utilization through nest expert software modules (not included in the scope of delivery) • High speed Pedpfx Aowgc I Rodispw • Consistent precision Technical data: • Short cutting times thanks to high positioning speed up to 90 m/min • Repeatability +/- 0.25 mm • Cuts single- or multi-layer material • Suitable for both sheet and roll material (can be upgraded with compatible unwinders) • Rapid amortization (Product photo for illustration purposes) The machine is CE-certified.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.500 mm, rentang pengukuran sumbu Z: 700 mm, Perlengkapan: Pelat tipe tersedia, Zeiss CNC Koordinat Mesin Prismo 9/15/7 MASS VAST GOLD - RDS+VAST XXT Tahun Pembuatan: 2004 Dilakukan Pembaruan pada 2024, Kalibrasi Terakhir 01/2025 Rentang Pengukuran: X= 900 mm, Y= 1500 mm, Z= 700 mm Secara teknis dan visual dalam kondisi sangat baik. Fitur dan Perlengkapan Perangkat: Pengontrol C99 dengan Panel Operasi BP26_SE Kompensasi Temperatur Otomatis Sensor VAST GOLD Sensor RDS dengan VAST XXT Majalah Pengganti Probe MSR 10-arah VAST Gold Majalah Pengganti Probe 3-arah VAST XXT Plat Pengganti Probe 8x VAST Gold Plat Pengganti Probe 3x VAST XXT Probe Referensi Probe Temperatur Aksesori Probe Bola Kalibrasi Stasiun Kerja HP Z4 dengan Sistem Operasi WIN11 dan Monitor Perangkat Lunak Calypso Basic 2024 Opsi Curve dan QS-Stat Peningkatan Calypso dan opsi lainnya dimungkinkan Aksesori dan opsi lainnya juga dimungkinkan Ppodpfx Aszk Id Aedisw Tersedia dalam waktu singkat

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Sistem Ekskavator dengan Derek Apung Pipa, lengkap dengan sabuk apung. Produsen: Rohr Bagger GmbH Tipe: RS 8,0/280-G Tahun pembuatan dasar: 1992 Kapasitas derek: 8 m³ Rangka roda dengan mekanisme pengangkatan dan penyeimbang Derek hidrolik Kisi penggaruk dengan saluran untuk material berukuran besar Ppsdpfxezkmmve Adiew Pengumpan pendulum Saringan pengeringan Svedala, tahun pembuatan 1998, Tipe H2PP 6000 x 2500 Sabuk pembuangan ekskavator, Produsen: Bleichert Rohr, tahun pembuatan 1996, Tipe TRV 9.1/1000 Substasiun trafo Produsen: Schneider, tahun pembuatan 1996, Tipe TS 61440, 800 kVA Sistem sabuk apung Tahun pembuatan 1992 Panjang total sekitar 250 m, lebar sabuk 800 mm Wadah / wadah untuk material berukuran besar, tahun pembuatan 2005, 15 m x 5 m x 2,75 m, volume muat sekitar 40 m³, berat sekitar 45 ton.

Tahun pembuatan: 1995, Kondisi: bekas, Tangki flotasi. - Dirancang untuk pendinginan dengan amonia (juga dapat didinginkan dengan glikol), 1 x pendingin mantel. - Stainless steel - Terisolasi dan berlapis - Cangkang berdiri, pendek - Perlengkapan udara pembersih dengan katup pengaman Mesin (tambahan): Tangki stainless steel dengan pendingin untuk instalasi luar ruangan Kapasitas: 74.480 l Tekanan kerja: 0,9 bar Psdpfxezgcvls Adiopw Lebar: 3,27 m Tinggi: 12,55 m Bahan: stainless steel Posisi: berdiri tegak Konstruksi dasar: cangkang berdiri, pendek Perlengkapan: pendinginan: 1 x pendingin mantel; isolasi; perlengkapan udara pembersih dengan katup pengaman; pengukuran suhu

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 120 kg, panjang total: 900 mm, lebar total: 1.500 mm, tinggi total: 2.050 mm, tegangan masuk: 230 V, daya laser: 30 W, panjang gelombang laser: 1.064 nm, akurasi pengulangan: 0,01 mm, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, Perlengkapan: Port USB, pencahayaan, The versatile LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables the marking of nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking has become essential. The powerful laser software allows users to easily create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software is also capable of automatically serializing numbers and part numbers after initial setup. Moreover, it can retrieve variable data (such as drawing numbers and project designations) from existing spreadsheets and automatically transfer this information into predefined fields. Integration of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, motorized Z-axis, drawer systems, and more, are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking area 150x150mm (larger sizes available as an option) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system Pjdpfsyxccrox Adiepw • Optional: autofocus system for automatic focus distance determination • Optional: extraction system (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder for easy focus adjustment • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminium profile • Air-cooled • Door width approx. 700mm / door pass-through height: 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 120 kg, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, Sistem pelabelan laser serbaguna LAS 28 XLe dari Systemtechnik Hölzer GmbH dapat digunakan untuk berbagai jenis pelabelan. Dengan laser serat terintegrasi, Anda dapat melabeli hampir semua material, seperti baja, logam keras, aluminium, dan plastik. Tergantung pada kebutuhan, sistem ini dapat dilengkapi dengan laser serat 20, 30, atau 50 Watt. Untuk pelabelan permanen, penggunaan laser kini menjadi hal yang tak terhindarkan di banyak industri. Dengan perangkat lunak laser yang canggih, teks, angka, kode 2D, kode QR, dan logo dapat dibuat dengan mudah hanya dengan beberapa klik, tanpa memerlukan pengetahuan pemrograman yang mendalam. Perangkat lunak secara otomatis menghitung nomor seri dan nomor artikel setelah pengaturan awal. Selain itu, perangkat lunak dapat membaca data (informasi variabel seperti nomor gambar, nama proyek, dll.) dari tabel yang ada dan secara otomatis mentransfernya ke area yang telah ditentukan. Penggunaan pemindai genggam juga dimungkinkan. Pjdpfx Aowkpvvedijpw Perlengkapan standar mencakup PC terintegrasi dengan sistem operasi Windows dan perangkat lunak laser. Secara opsional, model laser LAS 28 XLe dapat dilengkapi dengan sumbu putar (chuck 3 rahang) untuk pelabelan komponen silinder. Pilihan tambahan lainnya, seperti lengan samping untuk pelabelan komponen panjang, sumbu Z yang dapat digerakkan, sistem laci, dll., dapat diimplementasikan. Sumbu yang dapat diprogram dan dikontrol melalui perangkat lunak (sumbu X, Y, Z) serta koneksi basis data juga dimungkinkan. Dibuat di Jerman Laser serat 30W, 20W, atau 50 Watt • Kelas laser 1 • Panjang gelombang 1064nm • Ukuran area penandaan 150x150mm (opsional lebih besar) • Perangkat lunak penandaan EZCAD dalam bahasa Jerman / Inggris • opsional: sumbu putar (chuck 3 rahang) • opsional: sistem pengukuran tinggi digital • opsional: sistem penyedot (termasuk filter karbon aktif) • opsional: sistem fokus otomatis – sistem untuk menentukan jarak fokus secara otomatis • opsional: Sumbu X, Y, dan Z yang dapat diprogram (dikontrol perangkat lunak) • Laser panduan (pratinjau sederhana, pratinjau kontur) • Pencari fokus (pengaturan fokus sederhana) • Lampu sinyal untuk menampilkan status pengoperasian • maks. tinggi komponen sekitar 300mm • Sumbu Z yang dapat disesuaikan secara elektrik • PC terintegrasi dengan sistem operasi Windows • Dudukan layar dan keyboard yang dapat disesuaikan ketinggiannya • Rangka dari profil aluminium • Didinginkan dengan udara • Ruang interior yang sangat besar • Lebar pintu sekitar 700mm / Tinggi pintu (lubang): 400mm • Koneksi 230V • Dimensi: sekitar 900 x 800 x 1900 mm (PxLxT) • Berat: sekitar 120 Kg