Beli Hidrogarne Fdl-150-100E/Nc bekas (13.881)

Kondisi: hampir baru (bekas), nomor mesin/kendaraan: FDL-150-100E/NC, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 150 t, lebar meja: 800 mm, jarak antara tiang: 1.250 mm, panjang total: 1.200 mm, tinggi kerja: 600 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, HYDRAULIC DOUBLE-COLUMN PRESS WITH TWO LATERAL CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR EXTRACTION OF THE MANDREL AND THE ROTOR SHAFT, AS WELL AS FOR SHAFT REMOVAL DURING REPAIR OPERATIONS Equipped with a retractable table for stacking and handling rotors and stators. Complies with all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES Comprises a rigid, electro-welded fixed-bed frame made exclusively of S355JR steel. Stabilized and machined at the end of the welding process to ensure perfect parallelism and accuracy. Calculated and designed with finite element software. Mechanically displaceable T-slotted table, 1200 x 800 mm, with a 1200 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. Central bore in the table of 250 mm diameter, maximum depth of 550 mm. Effective table lifting capacity for movement: 4 tonnes. Table displacement speed: 30 mm/sec. Internal front width: 1250 mm (distance between columns). Working height: 600 mm. 2 hydraulic cylinders, each with 75 tonnes of force (150 tonnes total), 1200 mm stroke, connected by a plate, with central bore of 250 mm diameter. Max. useful height from cylinder plate: 1,440 mm. Min. useful height from cylinder plate: 200 mm. EXTRACTION CYLINDER 1 central cylinder of 100 tonnes force, 1200 mm stroke. Adapted for fitting an extraction gripper, piston rod end threaded to M35x1.50, 40 mm length. Max. useful height of extraction cylinder: 1600 mm (to base of the rod thread). Min. useful height of extraction cylinder: 400 mm (to base of the rod thread). Nsdpfx Aewpg Awolkjcr HYDRAULIC UNIT Dual-speed hydraulic unit, 5.5 HP “Siemens Motor”, with automatic cutoff for high speed and independent speeds. Max. pressure 250 bar. Pressure regulation system via proportional valves. Air-oil cooler. Temperature sensor. Hydraulic unit located on the right side. Includes a SIEMENS SIMATIC S7 1200 safety PLC and a 12" HMI touch display (MTP model) with 99 memory slots, allowing control over pre-pressing force, pressing force, fitting, and stroke for the pressing and extraction cylinders, as well as dwell times during processes. Electric and hydraulic controls are redundant and self-monitored. An additional safety block and self-monitoring devices are integrated for control and safety. Includes verification and certification of correct operation and safety distance for light curtains. Operation is performed via a low-voltage two-hand safety pushbutton. All installed electrical components are by Siemens (relays, contactors, main motor, etc.). Prepared for Industry 4.0. For safety, category IV photoelectric safety barriers are installed at the front work area, with two fixed side guards and a rear lockable guard with a magnetic disconnect detector.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 300 t, kecepatan operasi: 14 mm/dtk, kecepatan mundur: 265 mm/dtk, lebar meja: 1.000 mm, panjang meja: 700 mm, kedalaman tenggorokan: 500 mm, panjang total: 1.000 mm, lebar total: 2.400 mm, tinggi total: 3.500 mm, berat keseluruhan: 13.500 kg, tekanan: 290 batang, tinggi kerja: 1.100 mm, jangkauan kerja: 800 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Tekanan: 300 ton Ncsdpfxswpf S Ds Alkjr Daya motor: 30 kW Kedalaman pelubangan: 500 mm Kecepatan kerja variabel: 14,9 hingga 9 mm/detik Kecepatan pendekatan: 178 mm/detik Kecepatan mundur: 265 mm/detik Tekanan maksimum: 290 bar Langkah piston: 500 mm Ukuran meja bawah: 1.000 x 700 mm Ukuran meja atas: 800 x 600 mm Cahaya vertikal maksimum: 800 mm Tinggi kerja: 1.100 mm Lebar depan total: 10.000 mm Total lebar samping: sekitar 2.400 mm Total tinggi: sekitar 3.500 mm Berat: sekitar 13.500 kg.

Kondisi: baru, nomor mesin/kendaraan: MV-250E/NC, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 250 t, lebar meja: 2.500 mm, panjang meja: 1.150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, HYDRAULIC FOUR-COLUMN PRESS FOR DEEP DRAWING APPLICATIONS TECHNICAL DATA Press Force / Main Cylinder: 250 t Cushion Force: 50 t Motor Power: 11 kW Ram Stroke: 500 mm Approach Speed: 80 mm/s Working Speed: 7 mm/s Return Speed: 105 mm/s Column Diameter: 150 mm Maximum Pressure: 260 bar Usable Table Area: 2,500 x 1,150 mm Column Spacing: 2,500 x 700 mm Maximum Open Height: 1,000 mm Cushion Size: 950 x 750 mm Working Height: 1,100 mm Overall Height: 3,650 mm Weight: 15,000 kg Ncjdpowkuchofx Alksr DESCRIPTION The hydraulic four-column press MV-250E/NC belongs to the M/NC series and was specially developed for enhanced precision and capacity, particularly in deep drawing operations. It is equipped with upper and lower tables made of C45E steel, featuring DIN-650 T-slots for minimal friction during the vertical movement of the upper table. This is ensured by maintenance-free bimetallic bushings and perfect parallel alignment via four chrome-plated, ground cylindrical columns. The press employs an optimized hydraulic system operating at less than 290 bar to ensure long service life and reliable performance. All essential safety and health requirements are met in accordance with CE regulations. CONSTRUCTION AND TABLES • Three electro-welded blocks made exclusively from S355JR steel. • Stabilized and machined post-welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • The lower table is fitted with a 50-ton hydraulic cushion (usable area: 950 x 750 mm) and three front supports for handling tooling outside the press. • Includes a SIEMENS KTP-400 NC for controlling the ram stroke, speed changes, and cushion adjustment. • Integrated SIEMENS S-7 PLC supporting programming of up to 99 memory settings. CYLINDER AND HYDRAULIC UNIT • Single-acting cylinder with honed sleeve, chrome-plated piston, and wear-resistant guides. • The entire hydraulic unit is installed on the top of the press. • Hydraulic group comprises a low-noise Denison hydraulic pump and an air-oil cooler. • Includes: - Decompression system - Solenoid pressure valves - Pre-fill valves - Communication valve - Check valve - Pressure relief valve - Safety valve (fall-arrest). ELECTRICAL INSTALLATION AND SAFETY • Features a SIEMENS SIMATIC S7-1200 safety PLC and KTP-400 4-inch touchscreen on the control panel. Allows programming of semi-automatic/automatic cycles, power, stroke, and dwell time, with memory for up to 99 recipes – each capable of storing all main parameters. • The electrical control panel is equipped with a selector switch to choose work mode: manual “setup” or automatic cycle “production.” • Machine operation via low voltage electric foot pedals. • For safety: Category IV light barriers at the front working area, two fixed side guards, and a rear safety guard equipped with a magnetic separation detector.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: belum diuji, kecepatan operasi: 110 mm/dtk, kecepatan mundur: 180 mm/dtk, tabel jarak ke piston: 1.500 mm, panjang total: 3.800 mm, lebar total: 4.500 mm, tinggi total: 6.400 mm, We are offering a newly built machine of the type shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Data: - Pressing force: 800 tons - Opening force: 80 tons - Motor power: 55/75 + 55/75 kW - Ram stroke: 1,000 mm - Fast advance speed: 110 mm/s - Working speed: 6 mm/s - Return speed: 180 mm/s - Guide column diameter: 250 mm - Maximum pressure: 250 bar - Usable table area: 3,500 x 2,000 mm - Lower table travel: 2,000 mm - Distance between columns: 2,000 mm - Daylight opening: 1,500 mm - Total front width: 3,800 mm - Total side length: 4,500 mm - Overall height: 6,400 mm - Weight: 134,600 kg The MV-800E/NC-SINCRO press was specifically developed for the setting and testing of molds, dies, and stamps. The four columns, each with a diameter of 250 mm and made from C45E steel, are manufactured for heavy-duty applications. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The machine complies with all relevant safety and health requirements according to CE regulations. STRUCTURE AND TABLE • Frame designed to withstand 600 tons of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC SYSTEM • Two double-acting hydraulic cylinders, each with 400 tons force. • Single-stage hydraulic power unit with automatic shut-off of advance speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table for displacement control and an electronic synchronizing system for compensation of off-center or unbalanced loads. • The press is equipped with a lateral pressure switch for optimal pressure adjustment for each job. Ncedpfxewlrv Ue Alkor • Glycerin pressure gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical system allowing operation with one or two main cylinder advance speeds. • The press offers both manual and automatic cycle modes (activated via a test selector switch): - Manual cycle allows step-by-step execution of all press movements at low speed. - Automatic cycle allows the press to run a complete production cycle. • Electrical safety system for upper table fall protection. • Lower table with hydraulic extraction and mechanical stops. • The machine is equipped with an operator panel featuring a touchscreen display for input of operating and calibration data. • 2 safety light curtains (category IV, 1,000 mm) installed at the front and rear. • Electrical components by Siemens, manufactured to IP55 protection class in accordance with applicable CE regulations and standards. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-check devices for operation and safety. Includes verification and certification of proper function and safety distance for light curtains. • Safety is ensured by a laser and area protection system with category IV light curtains.

Kondisi: bekas, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, panjang langkah: 250 mm, kecepatan mundur: 60 mm/dtk, lebar meja: 700 mm, panjang meja: 500 mm, tinggi meja: 900 mm, panjang total: 1.525 mm, lebar total: 1.075 mm, tinggi total: 2.675 mm, berat keseluruhan: 2.540 kg, jarak antara dudukan samping: 800 mm, Perlengkapan: penghadang cahaya keselamatan, RIGID FRAME HYDRAULIC PRESSES We have designed the motorized rigid frame hydraulic presses of the R/NC series with a range of six different capacities, from 80 to 500 tons. Specifically engineered for stamping, die cutting, and deep drawing applications. The next-generation R series hydraulic presses have evolved to offer versatile capabilities, including integration into automated production lines. They operate at hydraulic pressures below 320 BAR to ensure greater longevity of the entire hydraulic system. The R/NC series deep drawing and stamping presses feature an electro-welded frame constructed exclusively from S355JR steel. The frame is stabilized and machined after welding to ensure perfect parallelism and precision. All structural calculations and designs are carried out using finite element analysis software. This enables us to consistently guarantee our high standards of precision and quality. The presses are equipped with an upper and lower table manufactured from precision-machined C45E steel, both featuring DIN-650 T-slots. The upper table’s perfect parallelism is maintained by four lateral cylindrical guides fitted with maintenance-free, bimetal, low-friction bushings. Double-acting cylinder with honed barrel, chrome-plated piston rod, and maintenance-free wear guides. Two-speed motorized hydraulic unit with automatic disengagement of high speed. Includes cylinder decompression valve. Standard equipment includes a SIEMENS SIMATIC S7 1200 safety PLC and a 4” MTP-400 touchscreen located above the electric foot pedal. This system allows programming of semi-automatic and automatic operation modes, force, stroke, and dwell time for the upper cylinder. The control can store up to 99 recipes, with all process parameters programmable per recipe. The electrical panel features a selector switch for manual or automatic operation and a keyed selector for maintenance tasks. All hydraulic and electrical safety circuits are redundant and self-monitored. The system features an additional safety block and self-monitoring devices for control and safety functions. Includes verification and certification of correct operation and safety distances for the light curtains. To ensure safety, the machines are equipped with Type 4 PLe safety light curtains at the front working area, two fixed lateral guards, and a rear hinged guard with a magnetic interlock and polycarbonate windows, plus internal LED lighting. A hydraulic cushion or ejector can be installed as an option. Fully compliant with all essential health and safety requirements as per CE regulations. Each machine is supplied with an instruction manual. Force: 100 T Motor power: 13 kW Working speed: 3-9 mm/s Approach speed: 40 mm/s Return speed: 60 mm/s Maximum pressure (up to 320 bar): 319 bar Ram stroke: 250 mm Guide diameter: 50 mm Lower table dimensions: 700×500 mm Upper table dimensions: 600×450 mm Njdpfx Alswlgkmjkecr Max. vertical clearance: 500 mm Front opening: 800 mm Working height: 900 mm Overall width (front): 1,525 mm Overall depth: 1,075 mm Overall height: 2,675 mm Weight: 2,540 kg

Kondisi: hampir baru (bekas), nomor mesin/kendaraan: MV-300E/NC, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 300 t, lebar meja: 1.250 mm, panjang meja: 1.250 mm, panjang total: 2.300 mm, lebar total: 1.800 mm, tinggi total: 3.500 mm, berat keseluruhan: 18.000 kg, tekanan: 320 batang, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, PRENSA HIDRÁULICA DE CUATRO COLUMNAS PARA TRABAJOS DE ESTAMPACIÓN, EMBUTICIÓN, TROQUELADO Y DESBARBADO Nodpewphhnsfx Alkjcr

Kondisi: hampir baru (bekas), nomor mesin/kendaraan: MV-600E/NC, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 600 t, kecepatan operasi: 5 mm/dtk, kecepatan mundur: 18 mm/dtk, lebar meja: 990 mm, panjang meja: 890 mm, berat keseluruhan: 23.000 kg, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, HYDRAULIC FOUR-COLUMN PRESS FOR PUNCHING, DRAWING, PIERCING AND DEBURRING OPERATIONS Pressing force ton 600 Motor power 40 HP at 440 Vac / 60hz Working speed mm/s 5 Approach speed mm/s 15 Return speed mm/s 18 Ram stroke mm 1,015 mm - (40") Guide column diameter mm 200 Usable table surface mm 990 x 890 x 130 (39" x 35" x 5") Clearance between columns mm 990 x 370 Vertical daylight mm 1,625 - (64") Working height mm 990 - (39") Lower hydraulic knockout ton 80 Lower knockout stroke mm 406.4 - (16") Upper hydraulic knockout ton 80 Upper knockout stroke mm 406.4 - (16") Total width (front) mm 1,850 Total length (side) mm 1,700 Total height mm 4,500 Weight kg 23,000 kg approx. The MV-600E/NC Four-Column Hydraulic Press belongs to the M/NC series and has been specifically developed for greater precision and capacity, designed for punching, deep drawing, stamping, and deburring tasks. CONSTRUCTION AND TABLE • Composed of three electro-welded blocks manufactured exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element analysis software. • Equipped with a SIEMENS SIMATIC S7 1200 PLC and a 7" HMI KTP-700 touch panel. This allows programming of force, ram stroke, and speeds, with storage for up to 300 different work cycles. CYLINDER AND HYDRAULIC SYSTEM • Double-acting cylinder with honed barrel, hard-chromed piston, and maintenance-free wear guides. • Motorized hydraulic unit with two speeds and automatic shut-off of fast speed. High-pressure pump and 10-micron return filter. Includes cylinder decompression valve, directional valve, and safety valve. A side-mounted pressure switch allows adjustment of optimal working pressure. • Glycerine-filled tonnage gauge. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual, semi-automatic, or automatic operation, as well as a selector for choosing fast or slow speed. • Equipped with PLC for internal coordination of operations and decompression times. • Operation via low-voltage two-hand control station. Ncjdpfewpggiox Alkjr • Electrical and hydraulic controls are redundant and self-monitoring, with an additional safety block and self-check devices for movements and safety. Includes inspection and certification of correct function and safety distances for light curtains. • Safety measures include Category IV light curtains in the front working area, two fixed side guards, and a rear movable guard with a magnetic interlock switch. • Fitted with IXON system for online connectivity in case of faults or reprogramming needs. • Ladder with upper walkway for maintenance access (scaffold).

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 400 t, panjang langkah: 750 mm, kecepatan operasi: 106 mm/dtk, kecepatan mundur: 125 mm/dtk, lebar meja: 2.000 mm, panjang meja: 1.000 mm, kecepatan penekanan: 12 mm/dtk, Perlengkapan: penghadang cahaya keselamatan, HYDRAULIC C-FRAME PRESS FOR STRAIGHTENING RAILWAY TRACKS Ncedewkv A Nepfx Alkor We are offering a new or rebuilt version of this press. The press will be available for sale by the customer in Q2-Q3 2026, as the project timeline has been extended. The hydraulic press CF-400E/NC is part of the CF/NC series and has been specifically developed for the straightening of railway rails. It is equipped with an upper and lower table made from machined C45E steel with DIN 650 T-slots. The press uses an optimized hydraulic system with a pressure of less than 255 bar, ensuring long service life and reliable performance. It meets all essential safety and health requirements as per CE regulations. TECHNICAL DATA Pressing force T 400 Motor power kW 22 Variable working speed mm/s 4-12 Approach speed mm/s 106 Return speed mm/s 125 Maximum pressure Bar 255 Stroke mm 750 Lower table mm 2,000 x 1,000 Ram plate mm 2,000 x 1,000 Maximum vertical clearance mm 1,000 Working height mm 960 Total height mm 3,560 + 600 Weight kg 39,500 STRUCTURE AND TABLE: • The C-frame is fully welded and made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element analysis software. • The upper table ensures perfect alignment thanks to four lateral cylindrical guides (80 mm diameter) fitted with maintenance-free bimetallic bushings. CYLINDER AND HYDRAULIC UNIT • Main cylinder is single-acting, jacketed, with a chrome-plated piston and maintenance-free, wear-resistant guides. • Two side-mounted double-acting cylinders with chrome-plated pistons and wear-resistant guides allow rapid advance and return speeds. • Equipped with two independent hydraulic safety blocks. • Motorized hydraulic unit with pre-fill valve for advance and return. Constant power pump with variable flow rate. • Fitted with a directional valve, pressure relief valve, decompression valve, and an air-oil cooling system. • Glycerin manometer with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • Includes a SIEMENS safety PLC, model SIMATIC S7 1200, and a 7” touchscreen, model KTP-700 COMFORT, installed in the control cabinet. Allows programming of semi-automatic and automatic operating modes, output, stroke, and dwell time. Offers a storage capacity of 300 recipes, with each recipe allowing pre-programming of all parameters. • All electrical and hydraulic controls are redundant and self-monitored. Includes an additional safety block and built-in self-monitoring devices for controls and safety circuits. Includes verification and certification of correct functionality and safety distances for light curtains. • Operation via a low-voltage electric foot pedal. • For safety, the system is equipped with Category IV safety laser and workspace protection with light curtains.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Laser marking system Manufacturer: Baublys Model: BL 150 S/NC 500 Year: 2001 Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2001 Laser power: 150 Watt Laser type: Q-switched, pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupling mirror (TEM00) Beam divergence: 5 mrad (TEM00) Pulse duration: CW / 90 ns Max. output power: 65 W multimode, 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line width (mixed mode): approx. 0.12 mm Deflection speed: 3 m/s; corresponds to 200 characters/sec at 1.5 mm character height (single-line font) Dimensions: approx. [data missing] Weight: approx. [data missing] Power Supply Voltage: 400 V, three-phase, 50 Hz, three-phase, right-hand rotating field Connection: 5-pin CEE plug 16 A 6h Max. power consumption: 8.5 kW, max. 16 A per phase Protection: 3 x 16 A slow-blow Water connection Cooling water flow: 7.5 l/min at 20°C supply temperature Outlet connection: Thread G 3/4" male Thermal load: approx. 6.5 kW Max. cooling water inlet temperature: 20°C Nodpfxsq Abnns Alkjcr Water consumption: depends on inlet temperature Outlet temperature:

Kondisi: baru, Pressure: 1500 Cylinder: fixed Stroke: 350 Column gap: 1500 Working speed: 3 Rapid advance: 22 Length: 2500 Width: 1200 Height: 2500 Approx. weight: 2450 Height-adjustable worktable – conveniently adjustable via chain Safe two-hand operation – comfortable control via hand lever and push button Nedpfx Alewwnhdjkecr Adjustable maximum pressure – customizable for a wide range of applications Integrated manometer – enables precise pressure monitoring during operation CE-compliant design – manufactured according to current safety and quality standards Operating manual – detailed and easy to understand, available in German and English Two working speeds – for particularly precise and efficient work The image is for illustration purposes only

Kondisi: baru, Pressure: 150 Cylinder: horizontally adjustable Stroke: 350 Frame width: 1500 Working speed: 3 Rapid traverse: 22 Length: 2500 Ncedpfx Ajwwng Tolksr Width: 1200 Height: 2500 Weight approx.: 2500 Cylinder horizontally adjustable: 1000 - Horizontally adjustable cylinder – 1000 mm - Height-adjustable work table – comfortably adjustable via chain - Secure two-hand operation – convenient control via hand lever and push button - Adjustable maximum pressure – can be individually set for a wide range of applications - Integrated manometer – enables precise pressure monitoring during operation - CE-compliant design – manufactured according to current safety and quality standards - Operating manual – detailed and easy to understand, available in German and English - Two working speeds – for especially precise and efficient work The image is a sample photo.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar meja: 700 mm, panjang meja: 450 mm, panjang total: 1.160 mm, lebar total: 1.290 mm, tinggi total: 2.085 mm, berat keseluruhan: 1.750 kg, tekanan: 320 batang, tinggi kerja: 850 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, es-hu-001 Ncsdpfswphvrox Alkor

Kondisi: baru, nomor mesin/kendaraan: FDM-150E/3000, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 150 t, kecepatan operasi: 7 mm/dtk, kecepatan mundur: 9 mm/dtk, panjang total: 2.750 mm, lebar total: 800 mm, tinggi total: 3.100 mm, berat keseluruhan: 10.000 kg, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, HYDRAULIC PRESS FOR BENDING The FDV-150E/3.000 double-column hydraulic press belongs to the F Series and is custom-designed for bending operations. It features an optimized hydraulic system with a working pressure of 295 bar, ensuring long-lasting durability and reliable performance. Fully compliant with all essential CE safety and health requirements. STRUCTURE AND TABLES Composed of a rigid, electrically welded fixed-frame structure, manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to guarantee perfect parallelism and accuracy. Engineered and calculated using finite element analysis software. Equipped with upper and lower machined tables made of C45E steel, both featuring DIN-650 T-slots. The upper table ensures perfect alignment via four 80 mm diameter cylindrical lateral guides with maintenance-free, anti-friction bimetallic bushes. Lower table dimensions: 3,100 mm x 600 mm, slotted. CYLINDERS AND HYDRAULIC UNIT Two double-acting main cylinders with chrome-plated pistons and maintenance-free anti-wear guides. Single-speed motorized hydraulic power unit. Includes cylinder decompression valve. Glycerine-filled pressure gauge with readout in tonnes. ELECTRICAL INSTALLATION AND SAFETY Equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a KTP-700 COMFORT 7” touchscreen mounted on the electrical cabinet. Allows for selection of semi-automatic and automatic operation modes, as well as programming force, stroke, and dwell time. Stores up to 300 work programs, with full parameter settings per program. Operation via low-voltage electric foot pedal. For safety, includes category IV photoelectric barriers on the working front, two fixed lateral guards, and a rear access guard with magnetic disconnect switch. TECHNICAL CHARACTERISTICS MODEL FDM-150E/3000 Capacity Tons 150 Motor Power HP 11 Njdpfxswpg D Uo Alkscr Ram Stroke mm 250 Working Speed mm/s 7 Return Speed mm/s 9 Maximum Pressure Bar 295 Front Opening mm 3,200 Side Opening mm 500 Usable Vertical Clearance (free space between tables) mm 550 Working Height mm 950 Total Width (front) mm 2,750 Total Depth (side) mm 800 Total Height mm 3,100 Weight kg 10,000

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, kecepatan operasi: 30 mm/dtk, kecepatan mundur: 42 mm/dtk, lebar meja: 450 mm, panjang meja: 450 mm, panjang total: 1.350 mm, lebar total: 960 mm, tinggi total: 2.020 mm, kecepatan penekanan: 6 mm/dtk, This press has been specially designed for bending, embossing, forming, punching, assembling, and deep drawing operations. Versions are available with capacities ranging from 50 to 150 tons. Model: CD-50/NC Pressing force: 50 t Motor power: 4 kW Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Max. pressure: 320 bar Ram stroke: 250 mm Lower worktable: 450×450 mm Ram with anti-rotation system Open height: 400 mm Weight: 1,480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bushing, chrome-plated piston rod, and wear-resistant guiding elements. To prevent wear on the piston rod, the presses are fitted with a detachable and replaceable pressure plate. Tools can be mounted in place of the pressure plate if required. An anti-rotation mechanism is provided, attached to the cylinder via a clamp and a guide rod. The hydraulic unit features two speeds, with automatic high-speed cut-off. A cylinder decompression valve is also included in the scope of delivery. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and a 4" MTP-400 touchscreen (mounted above the electric foot pedal) are standard. These allow for the programming of operating modes in semi-automatic and automatic functions, and adjustment of power, stroke, and dwell time for the upper cylinder. The system can store up to 99 recipes, with each recipe capable of programming all prior values. The control panel features a switch to select between manual and automatic operation modes, as well as a key switch for maintenance purposes. Electrical and hydraulic control systems are designed to be redundant and self-monitoring. The hydraulic safety block features electrically monitored valves to ensure all necessary operational safety. Operation is via a safety two-hand control system with Safety Level IV. Ncsdpfx Ajwlgcielkjr To guarantee operator protection, fixed side guards are installed, with a front opening of 650 mm. A hydraulic cushion or hydraulic ejector can be optionally installed. All machines are supplied with operating instructions. Presses in the CD series meet all essential safety requirements and criteria in accordance with CE regulations.

Kondisi: baik (bekas), Tahun pembuatan: 2008, Pilihan lengkap mesin bending press bekas 3 meter Tipe: E Brake 150 3100 Kapasitas: 3100 x 150 ton Kontrol E (CNC baru, original Safan!) Kontrol 8 sumbu (Y1, Y2, X1, X2, R1, R2, Z1, Z2) Penjepitan hidrolik atas dan bawah Tahun pembuatan: 2008 Persiapan alat bantu penekukan 1 set alat disertakan. Nsdpsy Ey Rajfx Alkjcr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 240 mm, daya motor spindle: 7.500 W, produsen pengendali: FANUC, model controller: 0-iTC, jumlah sumbu: 2, en Ncsdpfjy Dt N Hox Alker

Tahun pembuatan: 1991, Kondisi: bekas, nomor mesin/kendaraan: K2940, Pressing force: 150 t Working width: 4300 mm Ncsdpfs Dnf Ujx Alkjr Clear distance between uprights: 3600 mm Throat depth: 300 mm Maximum installation height: approx. 500/700 mm Working speed: up/down 41 - 65/10 mm/sec Back gauge: 1000 mm Electrical connection: 400 V, approx. 15 kVA kW Weight: 14 t Required space: 4600 x 1950 x 3100 mm

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 30-S/70, Swing diameter over bed: 625 mm Maximum turning length: 1500 mm Ncedpo Nzhdsfx Alkjr Spindle bore: 105 mm Spindle speeds: 6.6 - 2000 rpm Space requirements: 4400 x 2050 x 1820 mm Weight: 5200 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, Ref.-No.: 18565 Produsen: DEMAG Tipe: 150-610. Sistem NC4 Tahun pembuatan: 2005 Unit Penutup Gaya penjepit: 150 ton Jarak bukaan: 500 mm Ukuran kolom (h x v): 500 x 500 mm Tinggi pemasangan min.: 250 mm Lebar bukaan: 750 mm Njdpfxjxhfuao Alkocr Ukuran pelat (h x v): 750 x 750 mm Unit Injeksi Diameter sekrup: 45 mm Volume injeksi: 323 cm³ Berat injeksi PS: 290 gr Tekanan injeksi: 1973 bar Dimensi dan Berat Dimensi PxLxT: 5,45 x 1,63 x 2,1 m Berat mesin: 7500 Kg Robot Merek: Wittmann Tipe: W721-0231 Tahun pembuatan: 2005

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2008, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 06-13633, Caracteristici tehnice: Zona de lucru # Ridicare: 160 mm # Distanța minimă între axa mesei și axul arborelui: -30 mm # Distanța maximă între axa mesei și axul arborelui: +150 mm # Distanța minimă între suprafața mesei și axul frezei: 275 mm # Distanța maximă între suprafața mesei și axul frezei: 345 mm # Deplasarea transversală manuală a coloanei: ±20 mm # Diametru exterior: 250 mm # Diametru alezaj: 100 H7 mm Prelucrare piesă # Modul nominal maxim (în oțel cu rezistență de aproximativ 600 N/mm²): 3 mm # Diametru pas minim (danturare interioară): 60 + d0s mm, unde d0s reprezintă diametrul exterior al frezei (în mm) # Diametru exterior maxim (danturare interioară): 280 mm # Lățimea maximă a benzii danturate: 42 mm # Cursa maximă la tăierea dinților: 50 mm # Cursa axială maximă a arborelui: 70 mm Capacitate de încărcare # Greutate maximă suportată de masă (inclusiv dispozitive): 150 kg # Forță maximă exercitată de contrapunct: 1.500 kg # Unghi elice maxim obținubil (ghidare hidrostatică): ~45° Arborele frezei # Diametru exterior: 85 mm # Alezaj port-freză: 45 H3 mm Ncsdpfx Alexwl Tzskor Echipament electric # Tensiune de alimentare: 400 - 480 V, Tensiune de comandă: 24 V, Tensiune magnetică: 24 V, Secțiune cablu: 16 mm² Putere instalată: 15 kW, Protecție: 50 A Dimensiuni # Dimensiuni totale: Lungime=2980 mm, Lățime=1650 mm, Înălțime=2165 mm # Greutate: 5700 kg Caracteristici și capabilități principale: # Construcție verticală: Evacuare optimă a șpanului și manipulare facilă. # Control: Siemens Sinumerik 810D/840D # Precizie ridicată: Acuratețe de poziționare cu rigle liniar Heidenhain # Sistem de măsurare Marposs T25 (pentru aliniere unghiulară sau definire a punctului 0 de rotație) # Filtrare și răcire ulei # Transportor magnetic de extragere a șpanului Stare utilaj: NU FUNCȚIONEAZĂ: CNC-ul nu pornește

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06-13796, Caracteristici tehnice: Nedpfx Ajxwl N Aelkjcr Zonă de lucru # Elevare: 160 mm # Distanța minimă între axa mesei și axul arborelui: -30 mm # Distanța maximă între axa mesei și axul arborelui: +150 mm # Distanța minimă între suprafața mesei și arborele port-cuțit: 275 mm # Distanța maximă între suprafața mesei și arborele port-cuțit: 345 mm # Deplasare transversală manuală a coloanei: ±20 mm # Diametru exterior: 250 mm # Diametru alezaj: 100 H7 mm Piesă de lucru # Modul nominal maxim (pentru oțel cu rezistență de aprox. 600 N/mm²): 3 mm # Diametru pas minim (roți interioare): 60 + d0s mm # Diametru exterior maxim (roți interioare): 280 mm # Lățime maximă bandă dințată: 42 mm # Cursă maximă de tăiere a dinților: 50 mm # Cursă maximă arbore port-cuțit: 70 mm Capacitate de încărcare # Greutate maximă suportată de masă (inclusiv dispozitivele de prindere): 150 kg # Forță maximă exercitată de contrapunct: 1.500 kg # Unghi maxim de spirală obținut (ghidare hidrostatică): ~45° Arbore port-cuțit # Diametru exterior: 85 mm # Alezaj port-cuțit: 45 H3 mm Echipament electric # Tensiune de operare: 400 - 480 V # Tensiune de comandă: 24 V # Tensiune magnetică: 24 V # Secțiune cablu: 16 mm² # Putere instalată: 15 kW # Protecție: 50 A Dimensiuni # Dimensiuni totale: Lungime=2980 mm, Lățime=1650 mm, Înălțime=2165 mm # Greutate: 5700 kg Caracteristici și capabilități principale: # Construcție verticală: Asigură o evacuare optimă a șpanului și încărcare/descărcare facilă. # Control: Siemens Sinumerik 810D/840D # Precizie ridicată: Precizie de poziționare cu rigle liniare Heidenhain # Sistem de măsurare Marposs T25 (pentru aliniere unghiulară sau definirea punctului zero de rotație) # Sistem de filtrare și răcire ulei # Transportor magnetic pentru extracția șpanului

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06-13795, Caracteristici tehnice: Zona de lucru # Elevare: 160 mm # Distanța minimă între axa mesei și axul arborelui: -30 mm Njdpfxexwlmus Alkecr # Distanța maximă între axa mesei și axul arborelui: +150 mm # Distanța minimă între suprafața mesei și arborele port-cuțit: 275 mm # Distanța maximă între suprafața mesei și arborele port-cuțit: 345 mm # Deplasare transversală manuală a coloanei: ±20 mm # Diametru exterior: 250 mm # Diametru alezaj: 100 H7 mm Piesa de prelucrat # Modul nominal maxim (în oțel cu o rezistență de cca 600 N/mm²): 3 mm # Diametru minim de pas (antrenare interioară): 60 + d0s mm # Diametrul exterior maxim (antrenare interioară): 280 mm # Lățimea maximă a benzii dințate: 42 mm # Cursa maximă pentru tăierea dinților: 50 mm # Deplasare maximă arbore port-cuțit: 70 mm Capacitate de încărcare # Greutatea maximă suportată de masă (inclusiv dispozitivele de fixare): 150 kg # Forța maximă exercitată de contrapunct: 1.500 kg # Unghi maxim de elice obținut (ghidaj hidrostatic): ~45° Arbore port-cuțit # Diametru exterior: 85 mm # Diametru alezaj port-cuțit: 45 H3 mm Echipament electric # Tensiune de funcționare: 400 - 480 V, Tensiune de comandă: 24 V, Tensiune magnetică: 24 V, Secțiune cablu: 16 mm² Putere instalată: 15 kW, Protecție: 50 A Dimensiuni # Dimensiuni totale: Lungime=2980 mm, Lățime=1650 mm, Înălțime=2165 mm # Greutate: 5700 kg Caracteristici și dotări principale: # Construcție verticală: Evacuare optimă a șpanului și încărcare/descărcare facilă # Comandă: Siemens Sinumerik 810D/840D # Precizie ridicată: Precizie de poziționare asigurată de rigle liniare Heidenhain # Sistem de măsură Marposs T25 (pentru aliniere unghiulară sau definire punct zero de rotație) # Sistem de filtrare și răcire a uleiului # Transportor magnetic pentru evacuarea șpanului metalic Stare utilaj: ÎN FUNCȚIUNE

Tahun pembuatan: 2002, Kondisi: diremajakan ulang (bekas), On behalf of a client and at their expense, I am offering a VOUMARD 150 CNC L 1300 Ncodpfx Alsgigv Djksr for sale. The machine is equipped with: - 4-position turret: 3x internal, 1x blank position for external - Pneumatically swiveling dressing unit - Maximum diameter: 350 mm - Maximum length: 1,300 mm - CNC control: Fanuc 32i - Very extensive accessories, including several hydraulic steadies, power chuck, etc. For details, please refer to 'Documents.' The machine can be inspected under power at the owner’s facility. The machine was fully overhauled in 2016. Additionally, I am offering 2 Voumard VMX 90 A grinding spindles, one new and one fully overhauled. These can also be purchased separately.

Kondisi: baru, Бабочка (дроссельная заслонка) для бензинопроводов, Ду600 (24 дюйма), класс давления 150 фунтов на кв.дюйм. Новое оборудование, закуплено у Statoil. Nsdpfx Aovvhvyslkocr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06-00376, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Y: 400 mm, rentang pengukuran sumbu Z: 150 mm, jenis kontrol: Kontrol CNC, RINCIAN TEKNIS Rentang pengukuran Sumbu X: 400 mm Rentang pengukuran Sumbu Y: 400 mm Rentang pengukuran Sumbu Z: 150 mm Akurasi pengukuran: deviasi pengukuran panjang hingga sekitar 1,5 µm RINCIAN MESIN Kontrol: CNC Perangkat lunak: WinWerth, versi mulai 8.40 Pemegang alat / Probe: Renishaw, MK 2 Sistem probe: Renishaw Probe Interface PI 200 Tegangan: 230 V AC Frekuensi: 50 Hz Daya maksimum: 10 A PERLENGKAPAN Mesin granit dengan kaca ukur dan penutup Kontrol CNC dengan Scope-Controller Probe Renishaw (tersedia beberapa insert probe) Workstation PC Nsdpfx Alsyft Tmskecr Manual pengguna (WinWerth) Protokol kalibrasi dan pengujian Folder dengan dokumentasi mesin dan ruang ukur Media perangkat lunak dan kalibrasi (CD/DVD) Panel kontrol terintegrasi, sakelar utama tersedia