Beli Deburr bekas (129)

Kondisi: baik (bekas), Thread cutting machine, pipe thread cutter - Pipe deburrer: for thread cutting machine - Pipe size: up to inner diameter Ø 58 mm - Dimensions: see photos - Overall size: 270/250/H75 mm Chjdpfx Anowyu Hfepjd - Weight: 2.7 kg

Kondisi: sangat baik (bekas), Mata bor, mata bor tirus, mata bor untuk menghilangkan gerigi, alat untuk menghilangkan gerigi pada pipa baja Chjdpfszp Hn Dsx Anped -Produsen: Rhinos, Mata bor 90° dengan tangkai MT, dudukan MK2 -Diameter mata bor: Ø 50 mm -Rentang chamfer luar: 25-44 mm -Rentang pemesinan internal: 20-39 mm -Dimensi: Ø 50 x 160 mm -Berat: 0,9 kg

Tahun pembuatan: 1970, Kondisi: bekas, Thread cutting machine, pipe threader - For pipe size: max. 2 inch - Equipped with: threading dies - Rotational speed: rpm - Foot switch with emergency stop function - Pipe cutter - Internal deburrer - Operating voltage: 220 Volt - Dimensions: 1200/660/H1250 mm Csdpfed Nadbsx Anpehd - Weight: 166 kg

Tahun pembuatan: 2026, Kondisi: baru, Working width: 1000 mm Workpiece thickness (max): 0.5–50 mm Abrasive belt width: -- mm Machine weight approx.: 2.5 t The SBM-L 1000 G1S2, which operates using a dry process, allows for alternating processing of steel, stainless steel, and aluminum. It deburrs and rounds the edges on external and internal contours of stamped, laser-, fine plasma-, or waterjet-cut workpieces with a thickness of up to 50 mm on both sides in a single pass. * Two grinding units, one each on the top and bottom sides, remove splatter and light burrs from the outer and inner edges of sheet metal. * Four abrasive belts in total, two on the top and two on the bottom, process sheet metal simultaneously on both sides. All edges are either smoothed or rounded, depending on the tool settings. * Double-sided processing eliminates time-consuming flipping and double handling of workpieces. * Each pair of units can be switched on/off or adjusted independently according to application requirements. * Includes Siemens S7 control system: - Simple and convenient operation via an intuitive user interface - High operational safety with 3 password-protected user levels - Integrated program memory - USB/RJ45 interface for data exchange or connection of external devices (e.g., barcode scanner) - Direct material thickness input via touch panel - All axes automatically adjust to preset material thickness Chedpfxsuia Dqe Anped - Standby position for deactivated units - Service-friendly (e.g., plain-text fault messages) Comprises: - SBM-L 1000 G1S2 grinding machine (kit) - 4x SBM 1000 grinding belts with rib P60 SiC - SBM-L 1000 grinding belt L=3125 W=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry extraction - Standard pipework DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available upon request. The machine is available immediately from stock Niederlangen.

Kondisi: baru, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1350 mm Sheet thickness range – steel: 0.5 - 170 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 4,000 m³/h Suction connection diameter: 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made from stress-relieved welded steel construction for a stable and rigid frame. Chedpfxjynmwkj Anped Work table with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta switching of the main motors * Analog ammeter for each unit * Digital readout for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Monitoring of machine status with alarm notifications FEED SYSTEM Heavy-duty steel frame, wear-resistant surface. Vacuum conveyor belt available on request Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant Automatic belt centering Side guides to prevent the belt from lifting off Rubber hold-down rollers before and after each station, oil- and heat-resistant Idler rollers on the infeed and outfeed tables 1ST WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinders for automatic feed to the working position and lift-off in case of emergency stop Compatible with abrasive belts and/or Scotch Brite Motorized adjustment and electronic control of contact roller height Variable-speed drive with automatic emergency brake Pneumatic belt tensioning system Abrasive belt tracking system with electronic photo cell Oscillation adjustment for width and timing Positioning accuracy of contact roller adjustment mm +/- 0.02 Positioning speed of contact roller adjustment m/s 10 Contact roller diameter mm 180 Rubber roller hardness Shore 55 Stroke of contact roller adjustment (grit adjustment) up/down mm 8 Abrasive belt speed m/s 3 - 18 Motor power kW 11 2ND WORKING UNIT – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counter-clockwise Oscillating cross movement for the entire group Quick-change system for brushes Brush diameter mm 115 Number of brushes pcs. 20 Oscillation stroke mm 15 Brush rotation motor power kW 5.5 Rotational speed rpm 300 - 1000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 ACCESSORIES B Group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,580.00 with 0.3 mm wire brush €5,900.00 R GROUP – ABRASIVE BELT Motor 15 kW €1,060.00 OPTIONS: Return to Sender system (workpiece is returned to the front) €1,290.00 Conveyor belt with vacuum system, 300 mm wide – 4.0 kW €4,780.00 2 additional PVC-coated rollers at infeed and outfeed €2,040.00 Tampico brush system for part cleaning 0.55 kW Ø 150 mm €4,500.00

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.000 mm, tinggi total: 2.000 mm, panjang total: 1.620 mm, lebar kerja: 1.100 mm, berat keseluruhan: 1.000 kg, daya: 12 kW (16,32 hp), arus masuk: 20 A, ketebalan lembaran (maks.): 120 mm, ketebalan pelat baja (maks.): 120 mm, Deburring up to 1100 mm. Deburring of metal-cut parts up to 1100 mm width. The DM1100 Z finishes and deburrs lightweight metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide-belt station that can be used to deburr components sized from 50×50 mm up to 1100 mm in width. The DM1100 Z is also suitable for surface finishing applications and can be operated with both standard abrasive belts and non-woven/Scotch belts. DM1100 Z Working capacity (mm): 1100x120 Number of belt stations (Z): 1 Abrasive belt dimensions (mm): 1100x1850 Abrasive drum specifications: Ø186 mm Codpfjtzfpkox Anpjhd Abrasive belt speed (m/s): 8-22 Feed speed (m/min): 1.5-10 Abrasive belt motor per head (kW): 11 Feed motor (kW): 0.18 Total power (kW): 12 Power consumption (A): 20 Dust extraction connection per head (Ø mm): (1x) 152 Dimensions (mm): 1620x2000x2000 Weight (kg): 1000

Kondisi: baru, Tahun pembuatan: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and tubes in a single operation (approx. 3 seconds). Powerful industrial gear three-phase motor with frequency control for infinitely variable speed adjustment: 600 - 2,700 rpm, for deburring tubes and profiles with horizontal/vertical material dimensions up to 120 mm, easily adjustable worktable height (adjustable and lockable) to suit the required material size adjustable, lockable infeed (slide) of the deburring brushes to the worktable via handwheel with locking function. Csdpjnvfl Asfx Anpjhd Drawer for dust residue. Steel sheet housing prepared for connection to an external extraction system. Folding housing covers for easy brush changes. Machine body: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjusting screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Connection cable with CEE plug. Including operating tools. 12 months warranty for single-shift operation Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. Delivery: Free domicile (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST A QUOTE!

Kondisi: baru, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Speed range 2850 rpm Operating voltage 400 Volt Chedpfx Anexaamneped Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Equipment/features: - Deburring of single pieces and small batches - Deburring of straight round, rectangular, and square tubes + flat material - Heavy-duty, durable industrial design - With maintenance-free motor - Long service life and smooth operation due to balanced rotor - Equipped with precision ball bearings - Shelf for safety glasses - Includes 1 multipurpose wire brush, wire thickness 0.35 mm - Operating manual

Kondisi: diremajakan ulang (bekas), es-001 Cjdpeymarfjfx Anpshd

Kondisi: bekas, Thread cutting machine, pipe threader - Suitable for: Pipe size up to 2 inches - Rotational speed: 72 rpm - Foot switch with emergency stop function - Pipe cutter - Internal deburrer - Operating voltage: 220 Volts - Dimensions: 1100/560/H1140 mm - Weight: 126 kg Chodjfipc Tepfx Anpjd

Tahun pembuatan: 2023, Kondisi: baru, A manually operated budget tabletop grinding machine for deburring, grinding, and edge rounding of sheet metal parts. The ProGrinder is a manually operated deburring machine suitable for finishing sheet metal components. With the ProGrinder, you can semi-automatically deburr at an attractive price point. Q-Fin offers you the possibility to achieve high-quality edge rounding with minimal effort, remove burrs, and even polish surfaces to a high gloss. Optionally, you can mount an orbital head on the ProGrinder to give your workpiece a non-directional finish. Cedpfx Aolbmm Eenpshd Brand new machine from 2023, available from stock. Contact us for our attractive pricing. The machine comes with a 1-year warranty (excluding wear parts). Located in Bergeijk, NL. Machine power requirements: 230 V | 50 Hz | 4 A | 1 kW Maximum workpiece height: 120 mm Maximum workpiece width: 780 mm / unlimited length Dimensions (LxWxH): 1435 x 1100 x 1510 mm

Kondisi: baru, Model designation Chodjk D Nyijpfx Anped Chamfering system UZ12 ULTRALIGHT

Kondisi: baru, Tahun pembuatan: 2025, DM1100 Z - NEW DESIGN - for €29,800 Deburring up to 1100 mm width. The DM1100 Z refines and deburrs light metal sheets cut by laser, punching, or shearing. This machine is equipped with a single wide belt station, which can be used for deburring parts from 50×50 mm in size up to a width of 1100 mm. Chjdpjimdmtsfx Anpjd The DM1100 Z is also suitable for surface finishing, and can be operated both with standard abrasive belts and with non-woven/Scotch-Brite belts. With an additional table, the new DM1100 Z can be combined with an existing DM1100 C edge rounding machine. We also offer a part return system for this machine.

Kondisi: baru, Model designation Chamfering system B22 ZERO Chodpsk Au Dvjfx Anpjd

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Chodped Ev Upsfx Anpod Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width: 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic feed beveling machines available on the market. It is suitable not only for workshops, but also for on-site assembly. The machine features a stepless adjustable working angle system. Thanks to the special design of its drive system, the UZ18 Hardworker is also suitable for processing harder materials. The machine comes equipped with an automatic feed. Working with the UZ18 Hardworker is therefore highly convenient. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Operating range for sheet thickness: 6 – 40 mm * The bevel angle can be easily adjusted steplessly from 15° to 50° without the need for part replacement * Double-sided bevel (X, K) without material handling * Simple connection to a 3D manipulator for easier operation and handling * Quiet operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine can process large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces can be inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Operating range for sheet thickness: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We also offer an optional (mobile) 3D manipulator for this unit. Cedpfok Egrtox Anpshd

Kondisi: baru, Model designation Cjdsk Au Dropfx Anpshd B3 deburring/chamfering machine

Kondisi: baru, en-GB Chodpek Uqhaofx Anpjd

Kondisi: baru, ⭐⭐⭐⭐⭐ (5.0) 22 reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 25-day delivery ✈️ ✅✅✅ Energy efficiency class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️ FEATURES A blast cabinet is an effective method for cleaning, deburring, finishing, and preparing a wide variety of materials. Regardless of the type of media you use (aluminum oxide, glass beads, silicon carbide, plastic beads, or organic materials, etc.), blast cabinets designed for continuous blasting will undoubtedly increase your production and lower your costs by replacing manual, labor-intensive operations such as grinding, chemical cleaning, acid etching, wire brushing, and deburring. Here at Proton, we offer a wide range of blast cabinets for your specific application, including light-duty blast cabinets in various sizes, high-pressure blast cabinets, wet blast cabinets, and more. ✳️ TOP-QUALITY BLAST CABINETS ✳️ As a market leader for industrial blasting and sandblasting, sand and media blast cabinets, our team takes pride in our reputation. We have earned this reputation due to our focus on customer service and our decision to carry only high-quality blast cabinets and equipment. Our proven suppliers understand your requirements and build their machines for long-term durability. Our high-quality media blast cabinets are easy to maintain and made from premium materials, providing you with less downtime. ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ►►► SV-1000 BLAST CABINETS ◄◄◄ ✨ Sandblasting Cabinet, Technical Specifications ✨ Air consumption: 300–1000 L/min ✨ Working pressure: 2–12 bar ✨ Abrasive type: glass bead (glass sand), aluminum oxide, etc. ✨ WORKING CHAMBER (mm): 1000 x 800 x 750 ✨ EXTERNAL DIMENSIONS (mm): 1100 x 1250 x 2000 ✨ DOOR DIMENSIONS (W x H mm): 670 x 630 ✨ FILTER TYPE & QUANTITY: cartridge filter – 1 pc ✨ AIR CONSUMPTION (m³/min): 1 m³/min (1000 L/min) ✨ ELECTRICITY: 380 W ✨ TURNTABLE DIAMETER: 420 mm ✨ TURNTABLE WEIGHT CAPACITY: 350 kg ✨ LOADING TROLLEY: Included ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ Benefit from Proton’s 40 years of experience in surface coating technologies. Chjdpfx Asfw Nfhonpjd ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green energy ⚡️☘️ ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic feed beveling machines on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with automatic feed, making operation of the UZ12 ULTRALIGHT very convenient. * Suitable for conventional steels (up to a tensile strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Sheet thickness working range: 3 – 35 mm * Beveling of pipes from an internal diameter of 95 mm * Variable adjustment of the required bevel angle using interchangeable holder kits for each specific angle * Double-sided bevel (X, K) without handling the material * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine can process large workpieces without additional support at a speed of 1.8 m/min * Smaller workpieces can be inserted directly into the machine Chodeppgcyepfx Anpod * Lightweight and compact design, manageable by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable kits) - Sheet thickness range: 3 – 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are pleased to optionally offer you a mobile 3D manipulator for this unit.

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Thanks to the rotation of the brush, the operator does not need to rotate the pipe. Cjdpfjd Ixbzjx Anpohd The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.000 mm, jenis arus masuk: tiga fasa, ketebalan lembaran (maks.): 70 mm, ketebalan pelat baja (maks.): 70 mm, tebal plat aluminium (maks.): 70 mm, ketebalan pelat tembaga (maks.): 70 mm, ketebalan lembaran kuningan (maks.): 70 mm, panjang total: 3.800 mm, lebar total: 1.600 mm, tinggi total: 2.250 mm, berat benda kerja (maks.): 500 kg, berat keseluruhan: 3.200 kg, tinggi kerja: 70 mm, tegangan masuk: 400 V, masa garansi: 12 bulan, panjang meja: 3.560 mm, lebar meja: 1.000 mm, tinggi benda kerja (maks.): 70 mm, frekuensi input: 50 Hz, lebar benda kerja (maks.): 1.000 mm, kecepatan operasi: 33 mm/dtk, tinggi meja: 1.010 mm, diameter roda gerinda: 150 mm, lebar penggilingan: 1.000 mm, jenis penyesuaian ketinggian: mekanis, arus masuk: 75 A, lebar lintasan: 1.000 mm, Perlengkapan: Pelat tipe tersedia, Penandaan CE, Polska maszyna do gratowania – bezpośrednio od producenta Prezentujemy wysokiej jakości maszyny do gratowania wyprodukowane w Polsce przez firmę Madora Sp. z o.o. – zaufanego i doświadczonego producenta specjalizującego się w obrabiarkach do metalu i drewna. Chjdjwzv U Hopfx Anped Dzięki wieloletniemu doświadczeniu oraz innowacyjnym rozwiązaniom Madora znana jest z dostarczania trwałych, wydajnych i intuicyjnych w obsłudze maszyn, dopasowanych do potrzeb klientów przemysłowych w całej Europie. Nasze maszyny zapewniają precyzję, wysoką wydajność pracy oraz niezawodność na lata — wszystko to w konkurencyjnych cenach. GL 1000 PZZR to uniwersalna maszyna do gratowania wyposażona w cztery zespoły obróbcze, gwarantujące najwyższą jakość obrobionych detali. Pierwszy agregat – głowica taśmowa ścierna – oraz dwa oscylacyjne i obrotowe agregaty typu „Z” umożliwiają szlifowanie powierzchni oraz standardowe i ciężkie gratowanie już w początkowym etapie. Ostatni, obrotowy agregat służy do pełnego zaokrąglania krawędzi detalu poprzez intensywne gratowanie. Układ agregatów zapewnia wszechstronne zastosowanie maszyny po procesach takich jak cięcie plazmowe, cięcie laserowe itp. Zadaniem taśmy ściernej jest zebranie nadmiaru materiału podczas gratowania lub szlifowania. To idealne rozwiązanie w przypadku powstawania tzw. zadziorów i przypaleń materiału, np. po cięciu laserem. Moduł taśmowy umożliwia stosowanie różnych gradacji papieru ściernego w zależności od przeznaczenia i oczekiwanego efektu. Agregat obrotowy stosowany w GL1000 PZZR doskonale sprawdza się przy intensywnym zaokrąglaniu krawędzi z możliwością uzyskania profilu R2 na wysokich detalach.

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Spindle speeds 2850 rpm Angle range 0 - 60° (steplessly adjustable) Machine weight approx. 19.5 kg Cjdpfxjppgcvo Anpshd Maximum bevel width 20 mm + face side machining Designed for beveling and deburring straight edges, for so-called FACING – removing an unwanted layer of material from the face end of the workpiece, e.g. resulting from oxy-fuel cutting on sheet metal. Specifically developed for visible bevels and weld seam preparation. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle within the range of 0° - 60° * FACING – edge machining at an angle of 0° for removing undesirable layers after oxy-fuel cutting * Unique mechanical scale for setting the bevel width for higher precision * Very compact and ergonomic design for high productivity * Surrounding protective frame to prevent damage and provide versatile gripping options * With appropriate accessories, pipes from D=150 mm can also be processed * Additional adjustable handle - Bevel width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We can optionally offer you a pipe beveling device (D=150mm) for this machine.

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speeds 3600 rpm Angle range 30 - 60° (continuously adjustable) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm – Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable processing angle * Suitable for steel, stainless steel, aluminum, and other materials * Precise, heavy-duty, extra-long mechanical guide Cedpjppgcrsfx Anpehd - Number of indexable inserts: 5 pcs. (four cutting edges) - Feed: manual

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.500 mm, jenis arus masuk: tiga fasa, ketebalan lembaran (maks.): 100 mm, ketebalan pelat baja (maks.): 100 mm, tebal plat aluminium (maks.): 100 mm, ketebalan pelat tembaga (maks.): 100 mm, ketebalan lembaran kuningan (maks.): 100 mm, panjang total: 2.830 mm, lebar total: 2.100 mm, tinggi total: 2.000 mm, berat benda kerja (maks.): 500 kg, berat keseluruhan: 2.700 kg, tinggi kerja: 100 mm, tegangan masuk: 400 V, masa garansi: 12 bulan, panjang meja: 2.000 mm, lebar meja: 1.500 mm, tinggi benda kerja (maks.): 100 mm, frekuensi input: 50 Hz, lebar benda kerja (maks.): 1.500 mm, kecepatan operasi: 33 mm/dtk, tinggi meja: 1.010 mm, diameter roda gerinda: 150 mm, lebar penggilingan: 1.500 mm, jenis penyesuaian ketinggian: mekanis, arus masuk: 61 A, lebar lintasan: 1.500 mm, Perlengkapan: Pelat tipe tersedia, Penandaan CE, Polnische Entgratmaschine – Direkt vom Hersteller Wir präsentieren Ihnen unsere hochwertigen Entgratmaschinen, hergestellt in Polen von der Madora Sp. z o.o., einem bewährten und erfahrenen Unternehmen, das sich auf Metall- und Holzbearbeitungsmaschinen spezialisiert hat. Mit jahrzehntelanger Erfahrung und Innovationskraft ist Madora bekannt für langlebige, effiziente und bedienerfreundliche Lösungen, die auf die individuellen Anforderungen industrieller Kunden in ganz Europa zugeschnitten sind. Unsere Maschinen stehen für Präzision, Leistungsfähigkeit und langjährige Zuverlässigkeit – und das zu wettbewerbsfähigen Preisen. Die GP 1500 3Z ist eine außergewöhnliche, vielseitige Entgratmaschine zur Nachbehandlung von Blechen nach unterschiedlichsten Schnittverfahren. Cjdpfx Anjwzvkhspohd Ausgestattet mit drei Bearbeitungseinheiten des Typs „Z“ überzeugt sie durch außerordentliche Flexibilität und hohe Bearbeitungskapazität. Was bedeutet das konkret? Sie kann bis zu drei Arbeitsgänge gleichzeitig ausführen: Neben dem Entfernen von Anlaufschlacke nach dem Plasmaschneiden ist auch das Entgraten sowie das Verrunden der Werkstückkanten nach dem Laserschneiden möglich – alles in einem Arbeitsgang. Durch den großen Bereich an bearbeitbaren Blechdicken und einer maximalen Arbeitsbreite von bis zu 1.500 mm können sowohl kleine als auch große Werkstücke effizient bearbeitet werden. Mit geeigneten Werkzeugen eignet sich die Maschine zudem für starkes Kantenverrunden und Oxidentfernung. Die Entgratmaschine GP 1500 3Z ist mit einem TFT-Touchscreen-Bedienfeld ausgestattet, das es dem Bediener ermöglicht, sämtliche Bearbeitungsparameter – wie Werkstückhöhe, Vorschubgeschwindigkeit sowie Werkzeugdrehzahl – präzise und durchgängig zu steuern. Jede Einheit ist unabhängig steuerbar, sodass der Bediener frei entscheiden kann, welche Bearbeitungsschritte in einem Durchgang ausgeführt werden sollen.