Beli Hebrock Akv 069 bekas (49)

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) Lrsdpfx Agjlht Hwolsg F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Ledpfx Agolht Hzolsrg

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis Ljdpfxji Am U Dj Aglsrg F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Ljdpfxjhqadco Aglerg Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Lsdoi Am Ukjpfx Aglerg Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Lredpsi Anadefx Agljg

Kondisi: sangat baik (bekas), Mesin Edge Banding Hebrock F4 Lengkap dengan banyak fitur, dapat diuji sebelum pembelian, Pisau frais awal, Aplikasi lem dengan roller, Dilengkapi katup pembuangan lem, Panci lem yang dapat diganti, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Lrodpfx Ajxq A Ebjglsg Unit frais atas-bawah, R1 – R2 diatur secara pneumatik, Scraper profil, Unit pembuat sudut tumpul yang diatur secara pneumatik, Scraper datar, Paket nesting, Tinggi maksimal elemen: 45 mm, Ketebalan maksimal edging rol: 3 mm, Kecepatan feeding: 7 m/menit, Kapasitas daya listrik: 7,4 kW, Mesin sudah dicek, siap uji, kondisi sangat baik. Hanya 15.000 meter waktu kerja.

Kondisi: baru, ebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Lodpel D Rp Eofx Agljrg Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, tinggi kerja: 870 mm, daya: 11 kW (14,96 hp), lebar benda kerja (maks.): 70 mm, technical data: Max. edge thickness: 5 mm / 8 mm Max. workpiece height: approx. 40 mm / 50 mm Min. workpiece length: approx. 250 mm / 300 mm Min. workpiece width: approx. 70 mm Ledpfx Aoug Uqaoglsrg Feed speed: approx. 11 m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11 kW Electrical connection: 230/400V / 50/60 Hz Working table height: 870 mm Dimensions (LxWxH): 4100 x 1400 x 1300 mm Condition and further details see images.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, tinggi kerja: 900 mm, kebutuhan tinggi: 1.400 mm, persyaratan ruang panjang: 4.050 mm, lebar yang dibutuhkan: 1.300 mm, tekanan kerja: 7 batang, with PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm with special materials such as multiplex); maintenance-free glue pot with quick-change facility including glue discharge device; HF cross-cut saw station (approx. 12,000 rpm); HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combination version); corner rounding unit; surface scraper (including pneumatic lift); robust chain feed; ball bearing mounted double roller top pressure; inspection window on the rear side of the machine; extendable workpiece support; feed speed approx. 10 m/min. Complete with quick-change facility for corner rounding unit, radius scraper (including pneumatic lift), undercarriage. F 4 – Technical Specifications Lrodpox E N Nfsfx Aglsg Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min. Ready for operation: approx. 3.5 min. Max. total connected load: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Dust extraction port: ∅ 1 x 140 mm

Kondisi: baru, Tahun pembuatan: 2024, IN STOCK!!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm Edge banding machine with PLC control Jointing unit (incl. DIA tool) up to 2 mm milling depth Lrsdpfx Asglfwtjgljg Combination milling head Radius milling R=2 mm Corner rounding unit R=2 mm Radius scraper blade R=2 mm

Kondisi: baru, Tahun pembuatan: 2024, ENGLISH IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination rounding head Lrodpfjhymgdjx Agljg Radius cutter R=2 mm Corner radius cutter R=2 mm Radius scraper R=2 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2459, Mesin dalam kondisi sangat baik - panel kontrol sangat mudah dibaca - lebar benda kerja minimum sekitar 80 mm - panjang benda kerja minimum sekitar 200 mm - kecepatan pengumpanan sekitar 10 m/menit - rantai pengangkut dengan pelat rantai khusus yang terpasang permanen - penekan atas dengan dua rol Ljdpjx Ahmuofx Aglorg - panjang mesin 4300 mm - lebar mesin 1400 mm - berat sekitar 1250 kg - meja penyangga benda kerja depan dapat ditarik keluar - pelumas sentral otomatis untuk gergaji potong & mesin frais sudut - tangki lem leleh dilapisi teflon (sangat rendah perawatan) - siap operasi dalam waktu sekitar 5 - 6 menit - unit penambahan tepi - pemotongan dengan rol pneumatik - aplikasi lem langsung pada benda kerja - unit pemotong untuk tepi depan & belakang - unit frais rata / chamfer / radius - pembulatan sudut - pisau penarik permukaan dengan dual tracking

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 3074, laju pemakanan gandar Y: 10 m/menit, panjang total: 4.984 mm, tinggi benda kerja (maks.): 60 mm, lebar total: 1.425 mm, ketebalan tepi (maks.): 3 mm, tinggi total: 1.618 mm, berat keseluruhan: 1.400 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, diameter nosel ekstraksi: 140 mm, tinggi kerja: 888 mm, arus masuk: 32 A, frekuensi input: 50 Hz, diameter sambungan ekstraksi: 140 mm, tahun perombakan terakhir: 2025, Our reliable edge banding machine, originally purchased new in 2016, is now for sale due to the acquisition of a new machine. The unit has been operated in an 8-person carpentry workshop. A comprehensive refurbishment was completed in January 2025, which included new radius scrapers, new milling tools, and new polishing wheels. The pre-milling unit was sharpened, the adhesive roller’s clutch was replaced, and the glue tank underwent a complete overhaul and cleaning. The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR gluing. The pre-milling depth, edge banding material thickness, and the position of the lower and upper milling tools can be conveniently adjusted via handwheels located outside the machine housing. Custom edge banding programs can be saved and accessed via the machine's control interface. Switching between 0.4 and 2.0 mm edge thickness is pneumatic and program-controlled. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100-150 l/min) - Touchscreen control panel Lrodpfexlr S Hsx Agleg - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness (roll): 0.5-3.0 mm - Workpiece thickness: 8-60 mm (edge banding for up to 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm for end trimming saw / 220 mm for corner rounding - Processing units: - Diamond pre-milling unit (12,000 rpm) - Separating liquid tank/spray - Gluing unit - Edge end trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning liquid tank/spray - Flat scraper - Polishing wheel The listed price does not include VAT.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, jam operasional: 650 h, PLC control system (including 15” touchscreen), glue application onto the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool) up to 3 mm cutting depth, maintenance-free, coated glue pot with changeover system including glue discharge unit, HF twin-motor end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic adjustment, second HF milling station (approx. 12,000 rpm, incl. pneumatic lift-off unit), corner rounding unit, radius scraper, surface scraper (including pneumatic lift-off unit), cleaning station, groove saw (including pneumatic lift-off unit), robust chain drive, double roll pressure beam with ball bearings, aggregate viewing windows from both operator and rear sides, signal lamp for workpiece sequencing, extendable workpiece support, feed speed up to approx. 15 m/min, edge banding up to 60 mm workpiece thickness. Additionally, the machine features: - Quick-change system for corner rounding unit - Multi-radius scraper (R1/R2) - Heated infeed fence - Chassis - Separator spraying unit (panel spraying) - Cleaning agent spraying unit (panel spraying) - Edge protective spraying system - Nesting capabilities - Pneumatic 3-point adjustment Lrsdpfx Agsxn Nvbsljg - Multi-tool for HF milling station - Airtronic (for workpieces up to 40 mm thick) - Axis package (motorized adjustment for panel thickness, edge thickness & jointing depth) - Glue pot extraction hood In stock in Poland.

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Επικαριστική μηχανή Hebrock K36 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επικάλυψη και χωρίς ανάγκη συντήρησης, με προεγκατάσταση για γρήγορη αλλαγή του δοχείου θέρμανσης. - Οθόνη αφής 10” - Μέγιστο πάχος ταινίας επικάλυψης 3mm - Ελάχιστο μήκος τεμαχίου 200mm - Ελάχιστο πλάτος τεμαχίου 80mm - Ταχύτητα προώθησης 10m/min - Έτοιμη για λειτουργία σε περίπου 5min - Μέγιστη κατανάλωση ισχύος 14kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Διαστάσεις μηχανήματος 5250x1230x1430 mm - Βάρος περίπου 1700Kg Επιπλέον • Κεφαλή προφρεζαρίσματος Whispercut, ύψος τεμαχίου 60mm Lredowyu E Ujpfx Aglog • Θερμαινόμενος οδηγός τροφοδοσίας • Καμπύλωση γωνίας R = 2mm για μηχανισμό στρογγυλέματος γωνιών • Συσκευή ταχείας αλλαγής για τον κινητήρα μηχανισμού στρογγυλέματος γωνιών • Πολυγρανάζι ξυσίματος R2/R1 • 60mm ύψος τεμαχίου – στρογγύλεμα γωνιών • Μονάδα ψεκασμού αποκολλητικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός άκρων • Εξοπλισμός για nesting • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λόξευση) • Εσωτερικός LED φωτισμός • Εξοπλισμός για κοντά τεμάχια • Προετοιμασία για σύστημα επιστροφής (barbaric) • Πακέτο αξόνων / μηχανοκίνητες ρυθμίσεις ύψους, ακμής και προφρεζαρίσματος • Πρόσθετη στήριξη εισόδου και εξόδου τεμαχίων (450 mm η κάθε μία)

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Μηχανή περιθωριοκόλλησης Hebrock F5 με σύστημα ελέγχου PLC, χωρίς ανάγκη συντήρησης και με επικάλυψη στον ταχέως θερμαινόμενο δοχείο κόλλας, με προδιαμόρφωση για ταχεία αλλαγή δοχείου. - Οθόνη αφής 10” - Μέγιστο πάχος ταινίας 3mm - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Επιπλέον δυνατότητες Ljdpjwyu Rwofx Aglerg • Κεφαλή προφρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή combi cutter • Ακτίνα για στρογγυλοποίηση γωνιών R = 2mm • Στρογγυλοποίηση γωνιών με ακτίνα R = 2mm • Σύστημα ταχείας αλλαγής κινητήρα για στρογγυλοποίηση γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός στην ακμή • Εξοπλισμός nesting για τη μονάδα φρεζαρίσματος και τον ξύστη προφίλ ακτίνας • Πνευματική ρύθμιση τριών σημείων • Πολυεργαλείο (R2/R1/φαλτσοκόπηση) • Εσωτερικός LED φωτισμός

Kondisi: baik (bekas), Tahun pembuatan: 2003, I am selling a HEBROCK HFF08 edge radius milling machine for shaped parts. Year of manufacture: 2003. Suitable for curved components. Good condition, can be inspected/tested! It is also possible to purchase the AKV 088D edge banding machine. Ljdpfowun H Usx Aglorg

Kondisi: baik (bekas), Tahun pembuatan: 2005, de Lrodpfx Aoq H Spvsgleg

Kondisi: baru, Tahun pembuatan: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Lrjdpfx Agog Tu Rkoleg Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2025, Your ideal entry into edge banding: The 3.3 m long F 2 is not only cost-effective and space-saving, but it is also equipped with everything you need to process perfect edges right from the start. Diamond-tipped jointing cutters ensure excellently prepared workpieces for edge banding. Features include a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination cutter. Max. edge thickness: 3 mm Lsdsglfw Nspfx Aglsrg Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 5.9 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: approx. 3350 x 1300 x 1400 mm (LxWxH) Working table height: approx. 900 mm Weight: approx. 620 kg Extraction port: Ø 1 x 140 mm Flat scraper

Kondisi: baru, Tahun pembuatan: 2025, HEBROCK Mesin Lem Pinggir F2 next dengan kontrol PLC (termasuk layar sentuh) dan aplikasi lem leleh ke benda kerja untuk material pinggiran hingga 3 mm: mesin frais sambungan (termasuk alat potong DIA) hingga kedalaman frais 2 mm, bak lem bebas perawatan dengan persiapan untuk bak yang dapat diganti termasuk perangkat pengeluar lem, stasiun potong HF (sekitar 12.000 rpm), stasiun frais HF (sekitar 12.000 rpm) dengan pengaturan frais pneumatik terpisah dan pisau frais ganti (versi kombinasi), penggerak rantai yang kokoh, tekanan atas rol ganda dengan bantalan bola, jendela inspeksi dari belakang mesin, penopang benda kerja yang dapat ditarik keluar, kecepatan pengumpanan sekitar 10 m/menit. Termasuk: F2/500/10 Kepala frais sambungan Whispercut Lrodpowmdbrefx Agljg F2/500/20 Kepala frais kombinasi F2/500/2 Pisau frais radius R=2mm F2/12 Pisau penarik permukaan (termasuk pengangkatan pneumatik)

Kondisi: baru, Tahun pembuatan: 2025, Edge banding machine F5 with PLC control (incl. 15" touchscreen), thermoplastic glue application to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with provision for interchangeable pot including glue discharge device, HF milling station with pneumatic cutter adjustment, including corner rounding unit, radius scraper blade, flat scraper blade (incl. pneumatic lift-off device), buffing station Whispercut jointing head Combination milling head Radius cutter R=2mm Radius corner milling unit R=2mm Quick-change system for corner milling unit Radius changeover motor R=1mm Multi-radius scraper R1/R2 Chassis Release agent spray unit (PUR) Cleaning agent spray unit (PUR) pneumatic 3-point adjustment LED lighting INCLUDES 2nd interchangeable glue pot Lrodpfeh Hl Ayex Agleg Max. edge thickness 3 mm Workpiece thickness 8–50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300 x 1300 x 1400 mm (L x W x H) Weight approx. 900 kg Extraction port 1 x 140 mm

Kondisi: baru, Edge thickness up to 3 mm Total length 4122 mm Feed speed 10 m/min with PLC control (including touchscreen) and hot-melt glue application to the workpiece for Edging material up to 3 mm Jointing cutter (incl. DIA tool) up to 2 mm cutting depth1), maintenance-free glue pot with quick-change pre-equipment end trim device, HF trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and tipped insert cutter (combination version), corner rounding unit, scraper blade (incl. pneumatic lift), spare space (for buffing unit or radius scraper), robust chain drive, precision double roller overhead pressure unit, viewing window from rear of the machine, extendable workpiece support, approx. 10 m/min feed rate. Item No. F4/00/11 - Whispercut jointing head F4/500/10 - Combination milling head F4/500/20 - Radius milling head R=2mm F4/500/2 - Radius corner milling head R=2mm F4/08/2 - Quick-change device for corner milling unit F4/08/4 - Radius scraper (incl. pneumatic lift) F4/09 - Radius scraper R=2mm F4/09/2 Ledpsvwd Uusfx Aglerg - Chassis F4/10 - Pneumatic 3-point adjustment (for radius, chamfer, or flush milling) F4/30

Kondisi: bekas, Tahun pembuatan: 2016, AKV 3006 DK-F / 1 unit Edge Banding Machine AKV 3005 DK-F with pre-milling unit including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: With hot melt adhesive application to the workpiece for edge material up to 3 mm; 60 mm workpiece thickness without pre-milling unit, 40 mm with pre-milling unit; maintenance-free, coated glue pot; HF (high frequency) end trim station (16,000 rpm) for front and rear edge overhang; HF milling station (16,000 rpm) with interchangeable insert cutters (combination type) and fine adjustment from operator side; provision for additional processing units (Hebrock system); feed speed approx. 10 m/min; cutting depth adjustment for end trim saw; signal lamp for workpiece sequence; robust chain drive; ergonomically arranged operator panel; double pressure roller upper beam; unit viewing window from machine rear and operator’s side; PLC control with touchscreen. Technical Data: Feed speed 10 m/min. Panel thicknesses from 8–40 mm. Weight: depending on configuration approx. 1550 kg. Dimensions (L x W x H): 5250 x 1445 x 1600 mm. Airtronic incl. cooling and antistatic spray device, 2014 model. Lredpfxsycukno Agljg 1 unit hot air aggregate for producing an optical zero joint using specially suited edging materials. Includes: pneumatic glue pot positioning; cooling and antistatic spray equipment; 2 additional quick-change edge channels; special version corner rounding cutter max. workpiece thickness 60 mm, minimum workpiece length 200 mm (for Hebrock edge banders series 3000 only; retrofits possible – additional cost upon request). Technical Data: max. panel thickness 40 mm; max. edge thickness 1.2–2.0 mm; feed speed 7–10 m/min; air consumption approx. 280–580 l/min (Airtronic only), electronically controlled; ready for operation in approx. 2 min. Special version minimum workpiece thickness 8 mm. 1 unit Airtronic retrofit for PLC-controlled machines upon request. 1 unit retrofit only possible at factory in Hüllhorst-Oberbauerschaft. Upgrade to 8 mm edge thickness available up to a maximum workpiece thickness of 40 mm, including pneumatic saw adjustment. Special infeed fence for stacked panels, 1 unit for 16 mm and 19 mm thicknesses, max. overhang of edge 8 mm. Separate pneumatic cutter adjustment, 1 unit, operator panel controlled (straight/radius). Buffing station (mop), 1 unit. Corner rounding cutter, 1 unit incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness 40 mm, min. piece length 300 mm, radius R 2.0 mm. Ball bearing for corner rounding cutter 24.1 mm, 1 unit; ball bearing 24.2 mm, 1 unit. Corner rounding cutter for 60 mm workpiece thickness, 1 unit. Quick change mechanism for corner rounding cutter, 1 unit. Exchange motor 0.37 kW for corner rounding cutter, 1 unit incl. terminal box with screwed electrical connector, two pneumatic quick couplers, motor plate and short stroke cylinder, or alternatively SIKO counter, incl. cutter R 1.0 mm. Ball bearing for corner rounding cutter 24.1 mm, 1 unit; ball bearing 24.2 mm, 1 unit. Radius scraper, 1 unit incl. pneumatic lift-out device, radius R 2.0 mm. Radius scraper, 1 unit incl. pneumatic lift-out device, radius R 1.0 mm. Surface scraper, 1 unit with pneumatic control. Glue station change system incl. downward glue discharge device in preparation, 1 unit (without second glue pot), with ability to...