Beli Mesin Broaching bekas (78.532)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Hövelhof
11.128 km
Vertikal mesin broaching 16to
Arthur Klink
Hubungi
Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink
Model: RISZ 16 x 1250 x 400
Year of manufacture: 1983
Kodpfx Aaed Nb A Ne Nsdg
Machine No.: 03.2133
Weight: 6,800 kg
General Information / Technical Data:
Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition
- Pulling force: 16,000 kg
- Broaching length: 1,250 mm
- Broaching stations: 3 units
- Distance between broaching stations: 125 mm
- Clamping diameter for draw heads: 3 x Ø 80 mm
- Pass-through width between cylinders: max. 435 mm
- Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min
- Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min
- Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base)
- Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW
Accessories / Special Equipment:
The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit.
Remarks:
The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching internal vertikal
Karl KlinkRSI 10 x 1250
Hubungi
Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1886, used vertical hydraulic internal broaching machine with 3 broaching stations
Pulling force: 10,000 kg
Broaching length: 1,200 mm
Number of broaching stations: 3
Distance between broaching stations: 380 mm
Clamping diameter for broaching heads: 3 x Ø ___ mm
Passage width between the cylinders: max. XXX mm
Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min
Return speed: hydraulically steplessly adjustable from 7 to max. 25 m/min
Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit)
Power supply / connected load: 380 Volt 50 Hz / 8.0 kW
Accessories / Special equipment:
The machine is equipped with a work table featuring 3 bores for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the pull bridge as well as the feeder. The machine has an integrated coolant system.
Kedpst Dwb Dsfx Aa Nedg
Comments:
The machine is designed for use in series production; for optimal use, a foundation (pit) or optionally a platform is recommended. Broaching heads and push-out devices are available on request. The machine can be inspected at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching vertikal, mesin broaching
HenningU6 /1000
Hubungi
Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17065, manufacturer: Henning
model: U6/1000
Kdedpeup Uzfsfx Aa Neg
machine no.: 17065
year of manufacture: 1979
gross weight: 1,100 kg
general / technical data:
used mechanical vertical broaching machine Henning, in operational condition
drawing force: 6,000 kg (60 kN)
broaching speeds: 3 m/min and 6 m/min
return speed: 6 m/min
maximum stroke: 1,000 mm
maximum tool length: 1,200 mm
table size / working area: 600 x 460 mm / 480 x 340 mm
table opening: Ø 170 mm with eccentric table insert featuring Ø 90 mm borehole for standard broaching mandrels (Rausch system)
workpiece diameter: unlimited
dimensions (h x w x d): 1,650 mm x 1,200 mm x 700 mm (height = table height to floor, excluding superstructures)
motor: 7.4 / 10 kW
power supply: 380 Volt / 50 Hz
accessories / special equipment:
- integrated coolant system
- return stroke control with dual activation mode
- machine documentation
- automatic jaw opener at lower pull bridge position (for tool removal)
- tool clamping with universal jaws for flat shanks DIN 1416 BL 6
remarks:
The machine is in its original condition and functionality has been tested.
The machine is mechanically driven via trapezoidal thread spindle and geared motor. Unlike most mechanically driven broaching machines, in which the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. As a result, the machine is additionally column-guided and very robustly constructed.
The double spindle drive is ideal for maintaining a constant cutting speed even at higher drawing forces.
The machine is in stock at our warehouse and can be inspected under power.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Lelang
Lelang telah berakhir
Hessen
11.151 km
Mesin broaching
FORSTRISH 2,5 x 1000 x 320
Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2000, nomor mesin/kendaraan: 25, diameter benda kerja (maks.): 40 mm, panjang total: 1.700 mm, lebar total: 2.400 mm, tinggi total: 4.770 mm, kecepatan pemotongan: 60.000 mm/menit, TECHNICAL DETAILS
Performance Data
Maximum Traction Force: 25 kN
Maximum Stroke: 1,000 mm
Return Stroke Speed: 20 m/min
Maximum Shaft Diameter: 40 mm
Clamping Plate: 320 mm
MACHINE DETAILS
Machine Weight: approx. 6,000 kg
Control Cabinet
Kedpfxjwx Ibme Aa Nedg
Weight: approx. 800 kg
Total Installed Power: 24 kW
Coolant System
Net Weight: approx. 1,300 kg
Tank Capacity: 630 l
Hydraulic Unit
Net Weight: approx. 2,000 kg
Tank Capacity: 800 l
Lelang
Lelang telah berakhir
Hessen
11.151 km
Mesin broaching
FRÖMAGFSR9-2000 MZ
Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, diameter benda kerja (maks.): 900 mm, panjang langkah: 2.000 mm, jenis kontrol: Dikendalikan oleh PLC, TECHNICAL DETAILS
Kodjwx Ifxepfx Aa Nsdg
General Data
Pulling force: max. 9 t
Total power requirement: 25 kW
MACHINE DETAILS
Machine type: Electromechanically driven internal vertical broaching machine FSR
Special features: Designed bridge for mounting commercially available broaching tool holders
Drive: Ball screw drives and hardened, ground round guideways with adjustable three-phase motors for smooth operation
EQUIPMENT
Feed drives available
Shim control available
Sliding tables available
Prepared for automation and integration into interlinked systems
Temukan lebih banyak mesin bekas
Iklan kecil
Babberich
11.297 km
Mesin broaching dengan meja X/Y 650 x 220 mm
UrpeM200G
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1991, Manufacturer: Urpe
Model: M200G
Kedpfowp Nfnjx Aa Nodg
Year of manufacture: 1991
Stroke: 0–200 mm
Table: 650 x 220 mm
Tilting ram: 0–30°
Specifications
Metric US Standard
There are (currently) no specifications available for this machine.
Dimensions (estimated)
There are (currently) no dimensions available for this machine.
Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details.
Iklan kecil
Babberich
11.297 km
Mesin Broaching X/Y 650 x 510 mm
STANKO7D430
Hubungi
Kondisi: baik (bekas), Manufacturer: STANKO
Model: 7D430
Year of Manufacture: 1994
Table rotation: 360°
Head tilting capability up to 10°
Large cabinet with slotting and keyway tools
Lubrication system
Completely overhauled in 1994
Specifications
Metric | Imperial
Table diameter: Ø 630 mm
Table load capacity: 1,000 kg
Ram stroke: 320 mm
X-axis travel: 650 mm
Kdedpswpud Ajfx Aa Nog
Y-axis travel: 510 mm
Throat depth: 500 mm
Stroke range: 3 - 38 m/min
Power: 12 kW
Approximate Dimensions
Length: 3,000 mm
Width: 2,200 mm
Height: 3,000 mm
Weight: 6,150 kg
Please Note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute any representation or contractual terms. We recommend verifying all critical details.
Iklan kecil
Pforzheim
11.191 km
Mesin broaching
RauschRS 3/1000
Hubungi
Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: 3813, berat keseluruhan: 600 kg, daya: 7 kW (9,52 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, diameter benda kerja (maks.): 300 mm, Designation: Vertical Broaching Machine
Manufacturer: Rausch GmbH & Co. KG
Model: RS 30/1000
Machine No.: 3813
Year of manufacture: 2019
Never put into operation
Complete documentation
Without broaching tools
Working range
Max. stroke: 1000 mm
Max. pulling force: 30 kN
Min./max. cutting speed: 1.0 – 7.5 m/min
Min./max. return speed: 1.0 – 7.5 m/min
Internal broaching:
Tool feed: manual/automatic
Max. workpiece diameter: 300 mm
External broaching:
Fixed/movable/rotatable workpiece clamping plate
Clamping plate area: 255 mm x 400 mm
T-slots: 2 pieces, 14 mm wide, parallel/perpendicular to the tool slide mounting surface
Accessories/Special equipment:
Coolant system
Broaching tool safety device
Machine hood for work area protection
Required space: 0.72 m x 1.3 m x 2.67 m (L x W x H)
Weight: 600 kg
Voltage: 400 V
Electric current: 3-phase Υ/Δ, 50 Hz
Connected load: 12 kVA
Max. pre-fuse: 25 A
Motor:
Main drive: 7 kW / 2000 rpm
Coolant pump: 0.12 kW / 2700 rpm
Broaching tool holder:
Clamping jaws for flat and profile tools up to 18 mm shank width
Coolant supply: ½ “
Kdsdpfx Aaow Evkij Njg
Please send inquiries by email only.
All information provided to the best of our knowledge. Subject to errors.
This offer is directed exclusively to entrepreneurs as defined by § 14 BGB.
Sale is made under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller as well as for injury to life, body or health.
For further information, please visit the Witzenmann GmbH website under the headings "Imprint", "Terms and Conditions" and "Data Protection".
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
Karl KlinkRSI 20/DT
Hubungi
Tahun pembuatan: 1960, Kondisi: bekas, Max. pulling force: 20,000 kg
Max. stroke: 1,250 mm
Max. cutting speed: from 1 m/min to 7 m/min
Max. return speed: from 5 m/min to 25 m/min
Max. workpiece diameter: approx. 140 mm
Max. tool diameter: approx. 50 mm
Broaching stations: 2 units
The machine is equipped with a 2-station rotary indexing table.
The machine has an automatic tool feeder and is designed for manual series production.
Tool locking within the pulling bridge and in the tool feeder is carried out via a spring-actuated mechanism (pulling head according to DIN 1417).
Kdedpfjui Sbjx Aa Nog
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
ForstRF 16
Hubungi
Tahun pembuatan: 1959, Kondisi: bekas, Max. Zugkraft: 16 t
Max. Hub: 1250 mm
Schnittgeschwindigkeit: 5.6 m/min
Rücklaufgeschwindigkeit: 30 m/min
Kdedj Rwa Uepfx Aa Neg
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
HoffmannRISZ 10x1250x400
Hubungi
Tahun pembuatan: 1980, Kondisi: bekas, Maximum pulling force: 10 t
Maximum stroke: 1250 mm
Maximum cutting speed: 10 m/min
Maximum return speed: 27 m/min
Kdedpfjcdtplox Aa Njg
Maximum workpiece diameter: 320 mm
Broaching stations: 3 units
Weight: 4.8 t
automatic tool feeder
hydraulic pull head and end piece holder locking
automatic loading device for workpieces up to 100 mm diameter
magnetic chip conveyor
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
KlinkRSIZ 10 x 1200
Hubungi
Tahun pembuatan: 1956, Kondisi: bekas, nomor mesin/kendaraan: 1413, Manufacturer: Karl Klink
Model: RISZ 10x 1200
Year of manufacture: 1956
Weight: 3,450 kg
Machine No.: 1413
General Information / Technical Data:
Used vertical hydraulic internal broaching machine with up to 3 broaching positions, in operational condition.
Pulling force: 13,000 kg (maximum)
Broaching length: 1,200 mm
Number of broaching positions: 3
Distance between broaching positions: 100 mm
Clamping diameter of pull head: Ø 85 mm
Kedjdbmgmepfx Aa Njdg
Clear width between cylinders: max. 390 mm
Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min
Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min
Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended)
Power supply / Connected load: 380V 50Hz / 7.5 kW
Accessories / Special features:
The machine's crossbeam is equipped with 3 broaching tool holders; the workpiece table has 1 broaching position (modifiable). The tool clamping system and tool feeder are designed for spring-mechanical locking (DIN 1415).
The machine is fitted with an automatic tool feeder; the existing feeder can currently accommodate only 1 tool (central broaching position).
Integrated coolant system suitable for cutting oil.
Notes:
The machine is in age-appropriate good condition and ready for immediate use. Designed for manual operation in medium batch production. It features an automatic process cycle. For optimal use, a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools available upon request. The machine can be inspected under power at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
Karl KlinkRW 10
Hubungi
Tahun pembuatan: 1951, Kondisi: baik (bekas), nomor mesin/kendaraan: 1133, Manufacturer: Karl Klink
Model: RW 10
Year of manufacture: 1951
Weight: approx. 2,750 kg
Machine No.: 1133
General information / technical data:
Hydraulic horizontal broaching machine in good operational condition
Broaching stroke: 1,500 mm
Broaching stations: 1 unit
Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min)
Broaching tool clamping: Universal pull head for flat shanks up to 26 mm wide
Kedpfx Aajdcdrps Nodg
Through bore in clamping table: Ø 105 mm
Workpiece diameter: max. 430 mm (limited by oil and chip tray)
Cutting speed: Hydraulically stepless adjustable from 2 m/min to 7 m/min
Return speed: Hydraulically stepless adjustable from 7 m/min to 25 m/min
Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area)
Power supply / connected load: 380 Volt 50 Hz / 8 kW
Hydraulic motor: 7.5 kW
Accessories / special features:
• The machine is equipped with a universal pull head for flat shanks
• The machine has an integrated coolant/lubricant system
• The machine has an oil and chip tray with a tool feeder carriage
Remarks:
The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is clean in the areas of the guides and the cylinder. Broaching tools and arbors can be supplied on request. The machine is available for inspection and demonstration under power in our warehouse.
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
Arthur KlinkRISZ 25 x 2000 x 500
Hubungi
Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2123, Manufacturer: Arthur Klink
Model: RISZ 25x 2500 x 500
Year of manufacture: 1980
Kdsdpfxsdffzfs Aa Njg
Machine No.: 03.2123
General / Technical Data:
Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition
Tensile force: 25,000 kg
Broaching length: 2,000 mm
Number of broaching stations: 3
Distance between broaching stations: 160 mm
Chuck diameter for broaching heads: 3 x Ø 100 mm
Clear width between cylinders (nominal size): 500 mm
Clear width between cylinders (measured): max. 590 mm
Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min
Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min
Machine dimensions (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit)
Power supply / Connected load: 380 Volt 50 Hz / 22 kW
Accessories / Special Features:
Currently, the machine is without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously installed (the workpiece sliding table is modifiable).
The tool clamping system is equipped with hydraulic locking both in the pull bridge and the feed unit. The machine has a coolant system with integrated chip conveyor.
Remarks:
The machine is in very good condition and still retains its original paintwork. It is designed for use in series production and, for optimal operation, a foundation (pit) is ideally required. Broaching heads and ejector needles are available on request. The machine can be inspected at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Internal horzontal mesin broaching
Karl KlinkRW 5
Hubungi
Tahun pembuatan: 1962, Kondisi: bekas, nomor mesin/kendaraan: 1790, manufacturer: Karl Klink
Kdodpfx Aajdl Uzkj Nsg
Model: RW 5
Year of manufacture: 1962
Weight: approx. 2500 kg
Machine No.: 1790
General / Technical Data:
Hydraulic horizontal internal broaching machine in good, ready-to-use condition
Broaching stroke: 1320 mm
Broaching stations: 1 unit
Tensile force: 5000 kg at 3 m/min (3000 kg at 7 m/min)
Broaching tool clamping: universal pull head for flat shanks
Pass-through bore in clamping table: Ø 100 mm
Workpiece diameter: max. 420 mm (limited by oil and chip tray)
Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min
Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min
Machine dimensions (L x W x H): approx. 4600 mm x 600 mm x 1900 mm (without workstation)
Power supply: 380 Volt / 50 Hz / 15 A
Hydraulic motor: 4 kW
Accessories / Special Equipment:
• Equipped with a universal pull head for flat shanks
• Coolant / lubricant system
• Without automatic tool feeder
• Short oil and chip tray (approx. 900 mm)
Remarks:
The machine is ideal for producing keyways. On request, broaching needles and broaching mandrels can be supplied. The machine is connected to power and available for demonstration in our warehouse.
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
Karl KlinkRIS 6 x1000
Hubungi
Tahun pembuatan: 1958, Kondisi: bekas, nomor mesin/kendaraan: 1545, en-001
Kjdpfx Aoda Ugisa Nsdg
Iklan kecil
Hövelhof
11.128 km
Internal mesin Broaching
Karl KlinkRW 10
Hubungi
Tahun pembuatan: 1955, Kondisi: bekas, nomor mesin/kendaraan: 1331, Hersteller: Karl Klink
Modell: RW 10
Kedpsdbr H Tsfx Aa Nedg
Baujahr: 1955
Gewicht: ca. 2.950 kg
Maschinen-Nr.: 1331
Allgemeine / Technische Daten:
Hydraulic horizontal broaching machine in good, operational condition
Broaching length: 1,500 mm
Number of broaching stations: 1
Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min)
Broaching tool clamping: Universal draw head for flat shafts up to 26 mm width
Pass-through bore on clamping table: Ø 100 mm
Max. workpiece diameter: 420 mm (limited by oil and chip tray)
Cutting speed: Hydraulically continuously variable from 1 m/min to 7 m/min
Return speed: Hydraulically continuously variable from 7 m/min to 25 m/min
Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding work area)
Power supply / connected load: 380 Volt, 50 Hz / 8 kW
Hydraulic motor: 7.5 kW
Accessories / Special features:
• The machine is equipped with a universal draw head for flat shafts
• The machine has a movable coolant/lubricant unit for two media
• The machine is fitted with an oil and chip tray featuring a tool feed carriage
Remarks:
The machine is ideal for manufacturing keyways and profiles. The machine runs smoothly and is exceptionally clean in the guideways and cylinder area. Broaching needles and mandrels can be supplied upon request. The machine is available for inspection and demonstration under power at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching vertikal 25 hingga
VarinelliBV 25 x 2000 x 630
Hubungi
Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 3120, Manufacturer: Varinelli Milano Italy
Model: BV 25 x 2000 x 630
Year of manufacture: 1982
Machine no.: 3120
Weight: 13,000 kg
General / Technical Data:
Vertical hydraulic internal broaching machine with 3 broaching stations and a movable workpiece table, in good condition
Pulling force: 25,000 kg
Broaching length: 2,000 mm
Broaching stations: 3 units
Distance between broaching stations: 200 mm
Clear width between cylinders: max. 630 mm
Kedjd I R Ngopfx Aa Nodg
Cutting speed: hydraulic, steplessly adjustable from 1 m/min up to max. 9 m/min
Return speed: hydraulic, steplessly adjustable up to max. 18 m/min
Machine footprint: see machine layout drawing
Power supply / connected load: 380 Volt 50 Hz / 43 kW
Accessories / Special equipment:
The machine is equipped with a workpiece shuttle table for 3 broaching stations. The tool clamping system features a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The automatic tool feeder is hydraulically and mechanically locked. The machine is fitted with a coolant system and an integrated chip conveyor for installation in a pit.
Remarks:
The machine is in good condition and still has its original paintwork. It is designed for series production of medium and large batch sizes; for optimal use, installation in a pit (foundation) is required. Pulling heads and ejector needles are available on request. The machine can be inspected at our warehouse.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching vertikal
ForstRSIA-20-1320
Hubungi
Tahun pembuatan: 1971, Kondisi: bekas, General / Technical Data:
Manufacturer: Forst
Kodpfx Aaelwu Sps Nedg
Model: RSIA-20-1320
Year of manufacture: 1971
Weight: 6,000 kg
Pulling force: 20 t
Stripping speeds: 5 m/min
Return speed: 16 m/min
Maximum stroke: 1320
Stripping stations: 3
Clamping area: 370 x 620 x 105 mm
Note:
The machine is connected to power at our warehouse and can be inspected.
Iklan kecil
Hövelhof
11.128 km
Vertikal di dalam mesin broaching
Karl KlinkRSI 10 DT
Hubungi
Tahun pembuatan: 1960, Kondisi: diremajakan ulang (bekas), nomor mesin/kendaraan: 1733, Vertical internal broaching machine with indexing table by Karl Klink
Model: RSI10DT
Machine no.: 1733
Year of manufacture: 1960
Weight: 4.9 t
Kdedpfxjgyd S Se Aa Neg
Broaching force: 10,000 kg
Equipped with indexing table (2 stations)
Power supply: 380 V / 50 Hz
Rated current: 35 A
Connected load: 7.5 kW
The machine has been fully overhauled and is therefore in excellent condition.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching bagian dalam horizontal
Arthur KlinkRIW 10 x 1500 x 500
Hubungi
Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 04.2398, Manufacturer: Arthur Klink
Model: RIW 10 x 1500 x 500
Machine No.: 04.2398
Year of manufacture: complete overhaul by manufacturer in 1994
Weight: 3,700 kg
Pulling force: 10,000 kg (100 kN)
Max. stroke: 1,500 mm
Max. workpiece diameter: Ø 500 mm
Broaching speeds: infinitely adjustable from 1 m/min to 6 m/min
Return speed: steplessly adjustable up to 20 m/min
Kodpfxogyd T Eo Aa Nedg
Electrical connection: 400V / 50Hz
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Hövelhof
11.128 km
Mesin broaching
WiemersSR 30
Hubungi
Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 480 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, kecepatan mundur: 100 mm/dtk, diameter benda kerja (maks.): 800 mm, tinggi total: 1.680 mm, Manufacturer: Wiemers AG
Model: SR 30 /1000 Machine No.: WAG 3104
Year of Manufacture: 2025 Weight: 480kg
General / Technical Data:
New vertical broaching machine, make Wiemers
SR 30 (100% compatible with Rausch RS 3)
Pulling force: 30 kN (3,000 kg)
Broaching speeds: 3 m/min & 6 m/min
Return speed: 6 m/min
Maximum stroke: 1000 mm
Maximum tool length: 1200 mm
Table dimensions / working area: 430 mm x 320 mm / 340 mm x 220 mm
Table bore: Ø 90 mm for standard broaching mandrels “System Rausch”
Workpiece diameter: unlimited (with removable coolant swing system)
Broaching capacity / slot width: up to 20 mm in steel (for broaching tools from 16 mm slot width only with stepped tool shafts)
Dimensions (h x w x d): 1370 mm x 680 mm x 750 mm (h = table height to floor without superstructures)
Motor: 2.5 kW / 3.0 kW, 2-stage for 2 working speeds
Power supply: 400 Volt / 50 Hz
Equipment:
- Gearmotor drive with 2 working speeds
- Reinforced pull bridge made of tool steel for higher pulling forces
- Safety door with interlock, safety query and safety monitoring
- Easily removable swarf chute with tool extraction protection and parking bracket
- Externally adjustable tool length setting system (reproducible machine-wide)
- Protective covers for stroke adjustment and electrical switchgear
- Oil-tight shelf on control cabinet
- Electrical sensing of clamping jaws (tool removal control to prevent unintended return of pull bridge, providing additional safety for operator & tool)
- Integrated coolant system with electrically controlled solenoid valve and drain tap
Kedpfx Aaow D E Twj Nodg
- Coolant swing system with automatic coolant control via swing system
- Extra reinforced swarf basket and swarf screen with magnetic insert
- Stainless steel operating panel with permanent markings
- 4 central lubrication points for trapezoidal spindle drive with manual grease gun
- Electrical pre-wiring for external control unit (16-pin connector)
- Provision for automatic jaw opening when broaching profiles via roller lever
- Machine documentation with “CE” declaration of conformity
Optional extras:
- Automatic jaw openers for easier tool removal during profile broaching
- Three-sided splash guard enclosure (w x d x h): 700 x 350 x 600 mm
- External electrical operating unit for broaching and return stroke as well as emergency stop operation
Notes:
The machine is 100% compatible with Rausch broaching machines of the same performance classes in the RS 3, RS 4, and RS 6 series. All fixtures, tools, and mandrels can be used without restriction.
General Information
The dual spindle drive ensures a smooth and central pulling action with a consistent broaching speed. The machine is primarily designed for cutting keyways up to 20 mm (for broaching tools from 16 mm width only with stepped tool shafts). The machine’s design enables fast and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table allow broaching with both profile and flat broaching tools. Profile broaching is possible without additional pull heads, simply using centering bushes. Broaching tools and mandrels compatible with the machine are available upon request.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching
VarinelliBV 25 x1600 x 500
Hubungi
Kondisi: bekas, Tahun pembuatan: 1986, berat keseluruhan: 6.500 kg, daya: 42 kW (57,10 hp), tegangan masuk: 380 V, panjang broaching: 1.600 mm, jumlah posisi broaching: 1, diameter benda kerja (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy
Kodpfx Ajwqmaxsa Nsdg
Model: BV 25 x 1600 x 500
Year of manufacture: 1986
Weight: 6,500 kg
Machine number: 3269
General / Technical Data:
Vertical hydraulic internal broaching machine with one broaching station
Pulling force: 25,000 kg
Broaching stroke: 1,600 mm
Broaching stations: 1 piece
Clear width between cylinders: max. 540 mm
Cutting speed: hydraulically variable from 1 m/min up to max. 8 m/min
Return speed: hydraulically variable up to max. 18 m/min
Machine footprint: see machine layout drawing
Power supply / connected load: 380 Volt, 50 Hz / 42 kW
Accessories / Special Equipment:
The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-actuated locking mechanism (DIN 1417) in the drawbridge. The tool feeder system is locked hydraulically and mechanically. The machine features a coolant unit with an integrated chip conveyor for installation in a pit.
Remarks:
The machine still has its original paintwork. It is designed for use in series production for medium and large batch sizes. For optimal utilization, installation in a pit is ideally recommended. Draw heads and ejector pins are available on request. The machine is available for inspection at our warehouse.
General Information:
We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg up to 63,000 kg, both in horizontal and vertical execution, in stock. Many of our broaching machines in stock are available for demonstration.
If required, we can offer you used equipment such as draw heads, ejector pins, broaching tools, and other specific accessories.
As a contract broaching service provider, we can also assist you with technical enquiries based on our 50 years of experience in broaching technology.
Iklan kecil
Hövelhof
11.128 km
Mesin broaching
Rausch RaeummaschineRS3, RS4, RS 6
Hubungi
Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch
Model: RS3 /1000
Machine No.: 3714/1070
Year of manufacture: 1995
Weight: 400 kg
Overhaul: 04/2025 by Wiemers AG
General / Technical Data:
Unused, overhauled, mechanical vertical broaching machine
Rausch RS 3, with CE marking
Pulling force: 3,000 kg
Broaching speeds: 3 m/min & 6 m/min
Return speed: 6 m/min
Maximum stroke: 1,000 mm
Maximum tool length: 1,200 mm
Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm
Table opening: Ø 90 mm for standard broaching tools “Rausch system”
Workpiece diameter: arbitrary (removable coolant swivel system)
Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks)
Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure)
Motor: 2.5 kW / 3.0 kW
Electrical supply: 400 Volt / 50 Hz
Equipment:
- Gearmotor drive with 2 working speeds
- Safety door with safety monitoring (emergency stop circuit)
- Easily removable chip chute with storage for tools
- Externally adjustable tool length setting system (Rausch system)
- Protective cover for stroke adjustment and electrical switch units
- Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool)
- Integrated coolant unit
- Coolant swivel system (without electrical switching function)
- Three-sided splash guard hood with wide, front-opened working area
- Extra reinforced chip basket and chip sieve with magnetic insert
- Stainless steel operator panel with permanent marking
- 4 central lubrication points for the trapezoidal spindle drive with manual grease gun
- New machine documentation
- “CE” marking from manufacturer (1995)
Remarks:
The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed:
Kdjdpfxjw Huh Ne Aa Nsg
- New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze
- All bearings and seals replaced
- Coolant system incl. coolant/lubricant swivel system replaced
- New dual-speed SEW gearmotor
- New electrics (Siemens)
- New safety door instead of light barrier
- New clamping jaws
- All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new
- Stainless steel operator panel with permanent marking
- Machine repainted with 2-component structural paint
The machine carries the manufacturer’s CE marking.
General:
The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.
Iklan kecil
Hövelhof
11.128 km
Broaching mesin broaching tekan Neff
Neff16 SRKA
Hubungi
Tahun pembuatan: 1977, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 3273, Manufacturer: Neff
Model: 16 SRKA
Year of manufacture: 1977
Weight: approx. 4000 kg
Machine no.: 3273
General / Technical Data:
Used vertical hydraulic broaching press in good, ready-to-use condition
Pressing force: 16,000 kg
Stroke: 1,300 mm
Throat depth: 250 mm
Installation height: 1,500 mm
Table size: 680 x 450 mm
Table opening: 160 x 380 mm
Kedpfx Aajd N Rl Ne Nedg
Table height from machine base: 1,600 mm
Ram speed: hydraulically infinitely variable
Machine dimensions (W x D x H): approx. 1,000 x 1,800 x 5,100 mm
Power supply / Rated power: 380 V, 50 Hz / 22 kW
Accessories / Special Features:
• Integrated coolant system
• Press force indicator
• Press force limitation
• Speed regulation
Remarks:
The machine is in operational condition and retains its original paintwork. The work stroke is manually initiated via hand or foot control. The machine is powered and available for demonstration at our warehouse.
Kami memudahkan pencarian untuk Anda: "mesin broaching"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Mesin Broaching (78.532)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan





















































































































































































































