Beli Penggiling Biji Poppy bekas (6.120)

Kondisi: bekas, Tahun pembuatan: 1979, Table longitudinal travel / mm Pgjdjuddp Hjpfx Abueg Cross travel / mm Vertical travel / mm including vise Table dimensions: 1300x400mm The machine is sold without accessories.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, de2hu-20240619-1 Pgjdpfx Aboyangqjuog

Kondisi: bekas, de-001 Pgodpfsxxb Nbex Abuog

Kondisi: baru, Tahun pembuatan: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length / mm Machine weight: approx. 210-260 kg Space requirement: approx. 1100 x 760 x 860 mm The G115 surface grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With appropriate fixtures or shaped grinding wheels, inclined or contoured surfaces can also be machined. This machine is ideally suited for small businesses, maintenance workshops, DIY workshops, laboratories, teaching demonstrations, etc. TECHNICAL DATA Maximum stock removal: not greater than 0.03 mm Maximum grinding wheel linear speed: 35 m/s Table dimensions: 152×304 mm Maximum grinding height: 210 mm Longitudinal table travel: 340 mm Cross table travel: 170 mm T-slot (table): 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Pgodpfx Aovuuvkebuog Spindle motor: 550 W/220 V Vertical handwheel feed interval: 0.025 mm Lateral handwheel feed interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. Grinding head runs smoothly. Compact design and low noise operation. A working enclosure is available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial run-out of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: bekas, Tahun pembuatan: 1979, Grinding diameter: 630 mm Grinding length: 4000 mm Centre height: / mm Machine weight approx. 32,000 kg STANKO Cylindrical Grinding Machine 3M194 / 630 x 4000 mm (MET.1405) Technical Data: Grinding dimensions: 630 x 4000 mm Weight: 32,000 kg Pgodsvm Dzaspfx Abueg HS Code: 84602910 Experience the precision of the STANKO Cylindrical Grinding Machine 3M194 with dimensions of 630 x 4000 mm and reference MET.1405. Featuring a substantial weight of 32,000 kg, this robust machine guarantees stability and reliability in your machining operations. The HS Code 84602910 classifies it according to international standards for quality and performance. The 3M194 does not only stand out for its impressive size but also for its advanced technology, ensuring first-class results. Thanks to its dependable design and precise performance, this cylindrical grinding machine is ideal for processing a wide variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies aiming for the highest quality standards in metalworking. Rely on proven STANKO technology to optimise your production processes and achieve outstanding results. Invest in the future of your manufacturing with the STANKO Cylindrical Grinding Machine 3M194 – the perfect combination of performance, precision, and reliability. Contact us today to learn more about this exceptional grinding machine and discover how it can meet your production requirements.

Tahun pembuatan: 1998, Kondisi: bekas, X travel // mm Y travel // mm Z travel // mm Total power requirement / kW Pgjdjig A Erjpfx Abujg Machine weight approx. 950 kg

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range (rpm) Pgjdpfx Absl Ichvjujg

Kondisi: belum diuji (bekas), x-travel 850 mm y-travel 440 mm z-travel / mm Pgjdpfxsud Ills Abueg Control: TNC 355C Function: Not tested Operating hours: 42,427 h

Kondisi: bekas, Tahun pembuatan: 1994, x-travel / mm y-travel / mm Pjdpfxev T Nths Abusgg z-travel / mm total power requirement 2.3 kW incl. hydraulic vice

Kondisi: bekas, Bandwidth / mm Band length / mm Band speed / m/min Pgedpfxewgi Taj Abusg No data available...

Kondisi: bekas, Taper of milling spindle / Collet diameter / Speed range / rpm Psdpfohprk Hsx Abujgg For data, see images!

Kondisi: bekas, Tahun pembuatan: 1998, x-travel 6000 mm y-travel 4000 mm Pgedpfx Aeu I E Emjbusg z-travel 1250 mm w-axis 1500 mm Control Fidia Max. workpiece weight 60,000 kg Control for tool magazine/tool changer: Siemens Spindle speed 6.3 - 4,000 rpm Clamping surface 2500 x 4500 mm Magazine capacity 48 pcs. Tool holder SK50 Clearance between uprights 3700 mm Rapid traverse 30,000 m/min Total power requirement 63 kW Machine weight approx. 150 t Space requirement approx. 16.8 x 10.3 x 7.9 m

Kondisi: bekas, Taper of the milling spindle / Collet diameter / Speed range 1500 rpm Pedpfx Ajhwt Eljbujgg

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Pgsdpfxjn Smbrj Abujg Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing pipe (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-01 Pgsdexmaqyopfx Abueg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang penggilingan: 340 mm, lebar penggilingan: 170 mm, tinggi total: 730 mm, panjang total: 930 mm, lebar total: 780 mm, The G115 surface grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. With the use of fixtures or profiled grinding wheels, it can also handle inclined or contoured surfaces. This machine is ideally suited for small businesses, the maintenance industry, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum stock removal: no more than 0.03 mm Maximum peripheral speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Pedpfx Ajxb Uq Debujgg Longitudinal stroke of the worktable: 340 mm Cross stroke of the worktable: 170 mm Table T-slot: 1-12 mm Grinding wheel outer diameter × bore × thickness: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel graduation: 0.025 mm Lateral feed handwheel graduation: 0.02 mm Net / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packaging dimensions: 1100×760×860 mm The worktable can be moved forward and backward as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the machine. Smooth-running grinding head. Compact design and low noise emission. Work enclosure available separately. The machine is lubricated via a manual oil pump. Lubrication requires only pulling out the handle. If you require special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: At the proximal end of the main spindle, the radial runout of the taper bore axis is 0.01~0.02 mm at a distance of 100 mm.

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Pgsdsxwdygjpfx Abusg Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of metallic and non-metallic workpieces. These machines feature a large screening surface and allow for easy separation of workpieces from abrasive media. Optional Accessories Pjdpfx Aon Smclsbuogg - Pneumatic sound enclosure - Pneumatic flap control - Frequency converter - Dosing pump - Solenoid valve - Stand for control panel - Rinsing tube (various types) The images are for reference only. Optional accessories are available at an additional cost.

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 2000 mm y-travel 800 mm z-travel 850 mm Control HEIDENHAIN TNC 360 Psdjv H Ertjpfx Abujgg Total power requirement / kW Machine weight approx. / t Space requirement approx. / m

Kondisi: bekas, Tahun pembuatan: 2002, X-axis travel 560 mm y-axis travel 270 mm Pgodsv H Eryspfx Abueg z-axis travel 340 mm Table clamping surface 1000 x 230 mm Spindle taper SK40 Total power requirement 4 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.5 x 1.6 m

Kondisi: bekas, Tahun pembuatan: 2004, de-hu-001 Pgsdpfx Abjwirmnouog

Kondisi: bekas, de_hu_001 Pjdpjv N Rccsfx Abusgg

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 114.129 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2820, Sale only within Germany Controller: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously adjustable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - Taper SK50 - Through-hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input unit 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct path measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 positions - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Stack magazine mount for indexable inserts Measurement System CCD Area Camera: - Indexing and positioning of tools via coolant channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-fluted drill and reaming tools Renishaw Measuring Probe: - Probing of workpiece length/tool tip - Scanning of flute pitch - Positioning in a coolant channel bore at the tool tip Electrical Connection: - 63A primary fuse - Line voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8t Including: - Control cabinet cooling: water-to-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Hold-down device ----- Operating Procedure for Drills: - Manual loading of chain magazine outside the machine enclosure - Workpiece feed with automatic handling system - Workpiece clamping with automatic collet chuck - Positioning of workpieces in the work area - Workpiece machining - Automatic return of workpieces onto powered discharge conveyor Operating Procedure for Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside the workspace - Workpiece feed with automatic handling system - Automatic clamping with special clamping device - Positioning of workpieces in the work area - Workpiece machining - Automatic return of machined workpieces onto discharge system Grinding Drills: - Grinding flute profile - Grinding point - Grinding peripheral shape - Grinding relief chamfer - Grinding margin - Cylindrical grinding Grinding Indexable Inserts: Pedpfxswpqkre Abusgg - Grinding locating surface and pin ----- Two additional identical machines available for sale!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 78.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 216028, Verkauf nur innerhalb Deutschlands Sale only within Germany Pgsdpfxsx Hwyhe Abuog CNC grinding center UW I D With 5 controlled axes: X, Y, Z, A, B And fully automatic grinding wheel changer Control: NUM 1050 M with PC Centre height: 195 mm Max. tool diameter: 250 mm Grinding table X-axis Longitudinal travel: 625 mm Usable table surface: 900 mm x 185 mm Cross slide Z-axis Cross travel: 305 mm Vertical slide Y-axis Vertical travel: 305 mm Grinding head B-axis Swivel range: 240° Grinding wheel mount: HSK-C50 Spindle speed: 2,000 - 23,000 rpm Workpiece holder A-axis Mount: ISO 50 Max. speed: 600 rpm A, X, Y, Z axes with direct measuring system B-axis with indirect measuring system Renishaw 3D measuring probe permanently mounted on the grinding head Grinding wheel changer with 8 stations incl. 4 additional coolant nozzles Additional CNC-controlled slide unit W-axis Longitudinal travel: 380 mm Hydraulic vertical stroke: 40 mm Mounted on the grinding table For use with steady rest or tailstock 78,000 spindle hours 105,000 power-on hours Incl. extinguishing system Kraft+Bauer Note: Another similar machine is also for sale.

Kondisi: bekas, Hersteller: Kilia Typ: Wolf-Mischmaschine Höhe: 1500 mm Pgsdpfx Abot Up I Dsuog Breite: 1000 mm Länge: 1100 mm Spannung: 400V 50Hz 3N Leistung: 11/15 kW Einfüllöffnung (Wolfhals): 130 mm Durchmesser Hauptmaterial: Edelstahl