Beli Thermoform bekas (200)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil

11.175 km
Gergaji potong silang aluminium MEP COBRA 352 SX EVO
MEPCOBRA 352 SX EVO Aluminiumkreissäge
Hubungi
Kondisi: baru, MEP COBRA 352 SX evo [Semi-Automatic]
Article Number: CB352SX
Motor Power: 1.5 / 2.2 kW
Vise Opening: 180 mm
Blade Dimensions: 350 x 32 x 3.4 mm
Weight: 285 kg
Speed: 1700 / 3400 rpm
Cutting Capacity at 0°: 120 / 105 / 180x70 mm
Cutting Capacity at 45° right: 120 / 100 / 135x60 mm
Cutting Capacity at 45° left:
Cutting Capacity at 60° right:
Cutting Capacity at 60° left:
Description
Semi-automatic circular saw for cutting solid and hollow aluminium materials and light alloy metals, equipped with an electrowelded carbide-tipped saw blade.
Standard Equipment:
- Machine designed for mitre cuts from 45° right to 45° left.
- Head tilting allows for cut processing anywhere between 0° and 45° to the left.
- MEP presents its latest generation control unit for semi-automatic machines, featuring single-axis microprocessor control.
- OPERATING CYCLE: At the beginning of each cycle – Vice closes, motor starts, saw head lowers for cutting, motor stops, saw head lifts, vice opens.
- NEW – 16-character, 2-line display provides technical parameters such as: number of cuts performed, cutting time, ammeter, and over 100 diagnostic messages and warnings.
- NEW – Event display and logging of alarm and error messages, with the option to review incidents.
Electrical Equipment:
- NEW – Low-voltage control panel: Polyester membrane keypad with thermoformed, raised buttons and operation control signal.
- Saw bow stroke can be programmed directly from the control panel for adaptation to material size.
- Ball-bearing rotary table ensures smooth and precise positioning.
- Clamping system with two end-positioned vices, freely adjustable along the longitudinal axis of the part.
- Adjustable mechanical stops for quick head positioning at angles of 0° and 45° right and left.
- Chip remover prepared for optional extraction system.
- Automatic saw blade lubrication system, activated only at cutting start.
- Machine supplied without saw blade.
- Ready for installation of minimum-quantity lubrication kit for saw blade (optional), as well as standard coolant-based lubrication.
- Includes tool kit, user manual, and spare parts list.
For further technical data, please refer to the attached PDF document (Catalogue, p. 2).
Kedpjchkv Isfx Adqjdu
iklan kecil

10.188 km
Multivakum
MultivacR85
Hubungi
Tahun pembuatan: 2016, Kondisi: sangat baik (bekas), I have 3 units available.
Brand: Multivac
Model: R085
Type: Thermoformer
Year: 2016
Operating hours: 5,011
Power supply: 400V, 50Hz
Power: 7 kW
Film width: 420 mm
Max. film thickness: Flexible or rigid film
Max. forming depth: 80 mm
Kjdpfx Aewi E Ryedqedu
Cut-off length: 240 mm
Machine dimensions (L x W x H): 2,900 × 1,100 × 1,500 mm
Machine weight: 700 kg. It is possible to manufacture a tool with any desired configuration. Upper film brake equipped with a photoelectric sensor.
BUSCH vacuum pump
For each machine, we are able to provide a brand new forming tool!
iklan kecil

10.534 km
Mesin Pengemas/Pengemas
MultivacR230
Hubungi
Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), The Multivac R230 packaging machine is an advanced device primarily used in the food industry for packaging a variety of products, such as meat, cheese, seafood, ready-made foods, and many others. This machine is designed to create thermoformed packaging, utilizing vacuum technology to preserve the freshness and quality of packaged goods. Equipped with a Busch RA 0100B vacuum pump and constructed from stainless steel, the Multivac R230 is adapted for use with 320 mm film width and features various forming and cutting configuration options. Its application is widespread across many food industry sectors, from bakeries to meat and fish processing plants.
Kodpfx Aevzt Huodqjdu

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
iklan kecil

10.545 km
Tekan veneer
BuerkleM8
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth
Device for laminating flat and formed MDF furniture components with thermoplastic foils.
Basic device specifications:
• Electric connected load: approx. 28 kW (without optional components),
• Operating voltage: 400 V, 50 Hz, 3-phase,
• Control voltage: 24 VDC,
• Required air pressure: min. 6 bar,
• Air connection diameter: min. 1 inch,
• Required air volume: max. 2880 l/min,
• Compressed air consumption during pressing process:
Kdodewfz Nkopfx Adqju
◦ 4 bar forming pressure: approx. 720 l/cycle,
◦ Chamber filled to 50%: approx. 360 l/cycle.
Operator side: right in feed direction.
Electrical equipment:
• Compliant with DIN/VDE standards (EN 60204),
• Electrical documentation as per VDE,
• Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue.
Working materials:
• Applied material:
◦ PVC foils 0.30–1.0 mm,
◦ High-gloss foils 0.50–1.0 mm,
◦ PET foils 0.35–0.60 mm.
• Workpiece:
◦ MDF board (plain or profiled),
◦ Board temperature: approx. +18°C,
◦ Board moisture: approx. 6–8%,
◦ Density: approx. 750 kg/m³.
Technology:
• Membrane-less thermoforming,
• Usable area: 1330 x 2430 mm,
• Max. workpiece size: 1250 x 2350 mm,
• Minimum foil width: 1400 mm,
• Workpiece thickness: 6–35 mm (dependent on part geometry).
STOLMAT SPRAY EXTRACTION WALL
1. Purpose of the device:
• Extraction wall for dust and paint fume removal.
• Captures dust generated during spray application of paints and lacquers on furniture components.
• Used with high-efficiency spray systems (spray guns).
• Filtration efficiency >96%, no need for duct cleaning.
• Equipped with lateral covers to increase extraction performance.
2. Technical data:
• Dimensions (LxWxH): 2500 x 2130 x 700 mm
• Fan type: duct fan 500
• Fan capacity: max 7500 m³/h
• Max pressure: 400 Pa
• Fan motor power: 1.85 kW
• Voltage: 230/400 V
• Number of fans: 1 unit
• Filtering area (1st stage – cardboard filter): 4.80 m²
• Filtering area (2nd stage – PS fiber filter): 2.50 m²
• Dust filtration efficiency: >96%
3. Technical description:
• Wall made of 1.5 mm galvanized steel sheet.
• Assembly using bolted joints sealed with acrylic mass.
• Fan mounted on wall bracket.
• Side covers (“baffles”) made of galvanized steel sheet.
4. Dust filtration parameters:
• Cardboard filter (labyrinth type):
◦ Class G3 (DIN 53438, EN 779),
◦ Thickness: 60 mm,
◦ Flow capacity: 1200–3800 m³/h/m²,
◦ Filtration efficiency: 90–98%.
• PAINT STOP filter:
◦ Flow capacity: 2500–6300 m³/h/m²,
◦ Filtration efficiency: 93–97%.
iklan kecil

10.746 km
Menyikat mesin
Rapha SystemsRBM 1500
Hubungi
Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, foil storage carousels, and membranes on Machineseeker!
RBM 1500
Features:
• Four-head rotary brush system
• Infeed inclined roller conveyor with part separation
• Spiral brush for removal of loose glue residue
Options:
• Fifth-head rotary brush
• Outfeed accumulation roller conveyor with buffer function
• Deionization of furniture fronts after cleaning
• Modem for remote maintenance
Advantages:
• Random part loading thanks to automatic adjustment for front thickness and size
• Up to 2,000 parts / 8 hours
The RBM 1500 is a brush cleaning machine for foil-laminated 3D furniture fronts. The proven four-head rotary brush system removes adhesive overspray from the back sides of furniture fronts, delivering optimal edge quality.
This result is achieved as the disc brushes are pneumatically controlled to apply pressure and clean the rear faces. The RBM 1500 is designed for a throughput of up to 2,000 parts per shift, making it the ideal brushing system for small to medium-sized production operations.
The RBM 1500 features automatic size and thickness detection for furniture fronts. This enables adaptation to random part feeding with no loss of processing time. The flexible control system allows for brushing both rectangular and contoured parts. The low-maintenance brushes and long service life ensure low production costs.
Performance Data
Machine: RBM 1500
Kedpfx Adjd S Eagoqodu
Front shapes: Rectangle / contour
Front size minimum (L x W x H): 180 x 90 x 15 mm
Front size maximum (L x W x H): 3000 x 650 x 38 mm
Brush operation: 2,000 parts per 8 hours
Standard parts: 650 x 400 mm
Temukan lebih banyak mesin bekas
iklan kecil

10.875 km
Bentuk blok
Münchow-HühneStyroporherstellung / EPS Polystyrol
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, The machine has been out of operation for 4 years.
However, it was completely overhauled before being taken out of service.
Kdsdsh Da R Tepfx Adqou
iklan kecil

11.175 km
MEP COBRA 352 NC 5.0 Gergaji
MEPCOBRA 352 NC 5.0
Hubungi
Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic]
Kdjdpfx Aechkwhedqju
Article Number CB352NC 5.0
Motor Power 2.6/3.5 kW
Vise Opening 180 mm
Band Dimensions 350x32x3.4 mm
Weight 600 kg
Speed 1700/3400 rpm
Cutting Capacity 0° 120 / 105 / 180x70 mm
Cutting Capacity 45° right 120 / 100 / 135x60 mm
Cutting Capacity 45° left
Cutting Capacity 60° right
Cutting Capacity 60° left
Description
Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left.
Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material.
-New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times.
-Fieldbus communication system with dual microprocessor and serial port.
-Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings.
-New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings.
-New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED.
-Stroke of saw bow programmable directly from the control panel to adapt to cutting material.
-Ball bearing mounted turntable for easy and precise rotation.
-Clamping system with two front-end vises, positionable along the length of the part.
-Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right.
For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).
iklan kecil

11.201 km
Mesin pengemas vakum
GEAPowerPak XT 420
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 24.666 h, Fungsionalitas: berfungsi sepenuhnya, - Top-functional packaging machine (thermoforming machine) from the PowerPak series.
Kdodpfxeua Hchs Adqou
- Perfectly suited for packaging pasta products.
- Viewing under production conditions (packaging of gnocchi) possible at any time.
- Includes matching feed conveyor and ExaktaPack brand scale.
Technical details GEA PowerPak:
- Film width: 350 mm lower web, 334 mm upper web
- Approx. 12 cycles/minute
- Forming tool: 1.1, 2.1, 2.2
- Rigid film, PP, PET, etc.
- Bottom film preheating
- Longitudinal and cross cutting with noiseless edge trim wind-up
- Machine length: approx. 9 m
- Advance: 60 mm
- Busch vacuum pump (included)
- Discharge station and distribution pneumatic
- Recirculating chiller for cooling the forming and sealing stations.
Further information upon request and/or on-site inspection welcome.
iklan kecil

11.072 km
Illig SK 74-C
IlligSK 74-C
Hubungi
Tahun pembuatan: 2006, Kondisi: baik (bekas), Illig SK 74-C from an assisted workshop
Year of manufacture: 2006
Serial no.: 426-0172
Kdsdpfx Aor Nv E Nedqsu
Includes 2 pallets with approximately 38 rolls of film
Dimensions (approx. in mm): 2200 x 1600 x 1600
iklan kecil

11.061 km
Mesin pengolah daging
SealpackRE15
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1545012, panjang total: 4.500 mm, Sealpack RE15
Kdodpfx Adju Dipzeqou
Stainless Steel Thermoforming Machine
For Rigid and Flexible Film
Film Width: 320 mm
Draw-off Length: 200 mm
Lower Film Mount in Stainless Steel
Forming Station with Heavy Duty Pneumatic Lift System
Heating and Forming via Standard Lid Heater
Heating and Forming with Compressed Air
Stainless Steel Safety Covers
Free Loading Area of approx. 650 mm
Integrated Vacuum Pump, 100 cc (1 unit)
Film Transport Chain 1/2" Type K
Chain Guide Top and Bottom
Sealing Station with Pneumatic Stroke
Designed for Vacuum and MAP (Modified Atmosphere Packaging)
Formats:
1.1 – 2 units available with different widths
4.1
Additional custom formats can be designed on request!
Rigid Film Punch and Flexible Film Cutter
Edge Trim Winder
iklan kecil

10.746 km
Perkataan gaib
Rapha-SystemsPaternoster 3800
Hubungi
Kondisi: baik (bekas), In the field of 3D thermoforming, we also offer presses, turners, brushing machines, and membranes on Machineseeker!
Paternoster
For membrane press
FOIL STORAGE PATERNOSTER
For storing foil rolls in the warehouse and next to the press
Technical data:
Construction height: 3800 mm
Maximum foil width: 1600 mm
Maximum roll diameter: 500 mm
Maximum foil weight: 340 kg
Number of support bars: 12 units
Space requirement: 1000 x 2370 x 3800 mm
Including foil transport cart (trolley)
Drive power: 1.5 kW
Total loading capacity: 4080 kg with maximum roll weight of 340 kg
Device weight incl. loading: 5240 kg
Traffic load (t/m²): 1.89
Maximum core inner diameter: 90 mm, support bar diameter: 42.4 mm
Side paneling over full height
Protective grille from 2.2 m above floor to top of construction
Load chain as hollow pin chain, breaking force 100 kN, pitch 50 mm = support bar suspension grid
Circulating speed: approx. 5.5 m/min
Control via key switch with return (dead man) for up/down
Rated voltage: 400 V; 3N; 50 Hz, mains connection cable with CEKON plug 16A
External fuse protection: 10A slow-blow
Description:
The foil roll paternoster storage system is used for the storage of foil rolls, for example:
* Directly at the membrane press, enabling a large number of foil rolls to be stored in the smallest possible footprint. The required film for the pressing process is available at the push of a button.
* As a preliminary storage for all foil rolls. Here, a large number of rolls can be stored in a small space and are always easily accessible.
Optional features:
* Manual or automatic cutting device available
* Ionization
* Other construction heights from 2800 mm up to 6000 mm high paternosters
* Additional hanging rods
* Additional roll transport trolleys
Kdsdpfx Adjbgdv Ioqeu
Price on request
iklan kecil

11.170 km
Granulator / Pabrik Pemotongan
NEUE HERBOLDLM 300/800-S3-2
Hubungi
Tahun pembuatan: 1996, Kondisi: bekas, Granulator
Manufacturer: NEUE HERBOLD
Year of manufacture: 1996
Drive power: 37 kW
Rotor diameter: 300 mm
Working width: 800 mm
Rotor with 3 rows of knives
Kodpfxjf Rlbie Adqjdu
2 rows of stator knives
Conveyor belt feed hopper
Suitable for shredding film waste, canisters, pipes, crates, vegetable boxes, containers, thermoformed parts, etc.
iklan kecil

11.121 km
Pengangkat / alat pengangkat / truk pengangkat
Wahl AntriebssystemeUH08.01.01.62
Hubungi
Tahun pembuatan: 2015, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 585, Various pallet trucks for tasks such as material feed; suitable for different machine types: BEC300, BEC500, B1240, UPS1070, B1880, UPS1030, UPS1040, etc. The devices may also be useful for other applications. Year of manufacture may vary. All units are as new and have never been used.
Kdedpfx Asumtc Asdqju
iklan kecil

11.142 km
Karet alam Membran karet
Gmatick GmbHRM-2
Hubungi
Tahun pembuatan: 2025, Kondisi: baru, Natural Rubber Membrane
In the field of 3D furniture front production, we also offer you solutions for presses, foil cutting machines, foil storage carousels, and cleaning machines!
MEMBRANES for membrane presses – made of silicone or natural rubber
Top quality and suitable for all membrane presses (foil and veneer presses).
Kdsdpfx Adji E Hp Teqju
You can obtain our membranes either pre-cut to your desired dimensions or as roll goods.
NATURAL RUBBER
Type: RM-2
Color: grey
Surface: smooth / smooth
Standard widths: 1700 and 2000 mm
Rubber: natural rubber
Hardness: approx. 42° Shore
Thickness: 1.8mm, 2.5mm, and 4mm
Operating temperature: min. -20°C / max. +130°C
iklan kecil

11.241 km
Tekan hidrolik
HIDRALMACViersäulenpresse 400T
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Clear passage width 2500 mm
Stroke 900 mm
Total power requirement 62 kW
Machine weight approx. 27.5 t
Dimensions (L x W x H) approx. 3950 x 2200 x 4850 mm
Retraction force 40 t
Main cylinders 2 units
Column diameter 220 mm
Installation height 1300 mm
Table size 2500 x 1600 mm
Ram size 3100 x 16000 mm
Table height above floor approx. 900 mm
Forward travel speed 200 mm/sec
Return speed 200 mm/sec
Working speed 5 - 15 mm/sec
Oil tank 1500 l
Oil volume 1200 l
Adjustable pressure control from 50 - 400 t
Drawing cushion 1400 x 800 mm
Drawing unit force 30 - 60 t
Drawing cushion stroke 250 mm
Drawing cushion speed 5 - 80 mm/sec
Robust machine frame with solid welded construction
Low maintenance and reliable
Piston rod with induction hardening and chrome plating
Kdedpoin Et Nefx Adqeu
T-slots available as per customer specification or, if not specified, 22 mm as per DIN
CE certificate
Manufactured to EU standards
Operating manual, technical documentation, and paperwork in German
Construction steel LCG ASTM A36
T-slots in table and ram as per DIN 650-22
Travel distance control adjustable via monitor
Light sensors front and rear: Sick, 1300 mm
Hydraulic components by Bosch Rexroth
Monitor: Siemens 12 inch
Wall-mounted control cabinet
Press interior illuminated with LEDs
Hydraulic block monitored by safety PLC
Energy control system: reduces
pump stand-by consumption to approx. 2 kW
Remote access for remote servicing
Two-hand operation on movable stand
Further information:
Pressure build-up up to 400 t within max. 4 seconds after tool closure
Left side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Right side of press closed by door 1000 x 800 mm with cross bars Ø 20 mm
Operation of the press can be manual, semi-automatic, or fully automatic
iklan kecil

11.251 km
Termoplastik plasticizer seluler
KMH60 S
Hubungi
Kondisi: sangat baik (bekas), Mobile plasticizing unit for press-molding of thermoplastics
Manufacturer: KMH
Model: 60 S
Hydraulic pressure: 150 bar
Motor power: 16.5 kW
Heating power: 8 kW
400 V
Single STW 150/1-3-10-K
Temperature control unit
3.9 kVA
Heating capacity: 3 kW
380 V
Hydraulic pump
Complete plant closure,
Ksdpfx Adjg H I Nxsqjdu
large selection of mezzanine floors, pallet racking, shelving racks, carousel storage systems.
High-quality industrial machines, lathes, grinding machines, hand tools
Further articles – new and used – can be found in our shop!
International shipping costs on request!
iklan kecil

10.746 km
Hidupkan sistem
Rapha SystemsRDW 260
Hubungi
Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, brushing machines, film storage carousels, and membranes on Machineseeker!
Functional Description:
Once the feed tray is positioned at the press outfeed, the workpiece mat is pushed under the holding device. Vacuum is applied to hold it in place, and then the mat is rotated by 180°.
Subsequently, the vacuum is switched off and the workpiece mat is turned. The entire batch is further processed directly on the turner.
The batch is automatically unloaded from the turner and placed at an adjacent station for further processing.
Advantages:
• Increased production capacity through rapid emptying of the press table
• Time and labor savings since coarse pre-cutting is no longer necessary
Kdsded S Dqnepfx Adqsu
• Easier handling and inspection of parts
• The film edges of 3D furniture fronts are preserved, as the film is not drawn over the edge of the furniture front
• Optional automatic unloading, allowing the entire mat of parts to be cut out in a mat cutting machine
• The pins are protected with this turning system, as cutting does not take place directly on the pin table
Design Features:
• Torsion-resistant welded frame structure for mounting machine components
• Standard dimensions approx. 2800mm x 2220mm x 1200mm
• Hydraulic unit for the turning process
• Rotating table consisting of 9 arms with foam rubber coating
• Vacuum system incl. hose connections for the rotating table
• Turning cycle approx. 18-25 seconds
• Installed power: approx. 8 kW
• Siemens LOGO control
• Safety fences and protective devices
A video demonstrating the turning process is available.
iklan kecil

11.170 km
Granulator / cutting mill
NEUE HERBOLDLM 450/600-S4-2
Hubungi
Kondisi: baru, Cutting mill
Manufacturer: NEUE HERBOLD
Year of manufacture: NEW MACHINE
Drive: 37 kW
Rotor diameter: 450 mm
Working width: 600 mm
Rotor with 4 rows of knives
2 stator knife rows
Conveyor belt hopper
Kdjdpsckg Rfofx Adqsu
Suitable for shredding film waste, canisters, pipes, crates, vegetable boxes, boxes, thermoformed parts, etc.
iklan kecil

11.404 km
Penyegel baki
MultivacG 700
Hubungi
Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 260230, Multivac G 700 Traysealer
Year: 2018
Serial number: 260230
Connection: 400V
L: 6750mm / W: 900mm / H: 2000mm
Equipped with:
Stainless steel chain infeed conveyor
Infeed conveyor
Film roll holder
Throughfeed conveyor belts
Ksdpev I N R Aefx Adqsdu
Touchscreen control
Various parts / accessories
iklan kecil

11.142 km
Membran silikon, membran karet alam Membran
Gmatick GmbHSilicone Membrane Silicon Silikon rubber
Hubungi
Tahun pembuatan: 2025, Kondisi: baru, Silicone Membrane Sheet for Membrane Presses
Silicone Membranes for Membrane Presses
Natural Rubber Membranes
MEMBRANES for Membrane Presses – Silicone or Natural Rubber
Kdjdpoff Agisfx Adqeu
Top quality, suitable for all membrane presses (film and veneer presses).
Our membranes are available cut to your desired dimensions or supplied as roll goods.
For 3D furniture front manufacturing, we also offer solutions for presses, film cutting machines, film carousel storage systems, and cleaning machines!
MEMBRANES for Membrane Presses – Available in Silicone or Natural Rubber
Top quality, suitable for all membrane presses (film and veneer presses).
Our membranes are available in custom-cut sizes or as roll material.
SILICONE
Type: SM-1 3mm
Colour: translucent milky
Surface: smooth / smooth
Standard widths: 1700 and 1800 mm
Polymer base: Silicone
Hardness: 50° Shore
Thickness: 3 mm
Operating temperature: min. -50°C / max. 230°C
SILICONE
Type: SM-1 2mm
Colour: translucent milky
Surface: smooth / smooth
Standard width: 1700 mm
Polymer base: Silicone
Hardness: 50° ± 3° Shore
Thickness: 2 mm
Operating temperature: min. -60°C / max. +230°C
NATURAL RUBBER
Type: RM-2
Colour: grey
Surface: smooth / smooth
Standard widths: 1700 and 2000 mm
Rubber: Natural rubber
Hardness: approx. 42° Shore
Thicknesses: 1.8 mm, 2.5 mm, and 4 mm
Operating temperature: min. -20°C / max. +130°C
iklan kecil

11.533 km
Mesin pengemas vakum
Ligne complète de pastabox
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Box forming
Thermoforming of inner bag
Filling of pastes
Filling of toppings
Sealing with lid (lidding)
Kedpfeu Ivdtex Adqjdu
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil

11.906 km
Mesin pengemas blister
ANCIMOAC-60L
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Automatische Blistermaschine zum Formen oder Herstellen von Blistern aus PVC, PVDC, Polyethylen, Aluminium usw.
Versiegelung zum Verbinden der geformten und befüllten Linie mit dem Produkt mit der oberen Lage aus Aluminium, Karton, Polyethylen usw.
Thermoform- und Heißsiegelbereich: 400 x 200 mm
Inklusive Stanzstation für einzelne Plättchen, Folienabwickler/Zuführung und Aufwickler für Abfallentsorgung.
Kodpfxev I Ay Re Adqedu
Geliefert mit Rollenhandlingwagen, Rollenladewagen und Formatwechselwagen.
21 kW; 380 V III+N
Gesamtabmessungen: 7.400 x 963 x H1.900 mm
iklan kecil

10.746 km
Membran silikon, karet silikon
RAPHAMembrane Silikon, Naturkautschuk
Hubungi
Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker!
MEMBRANES for membrane presses – made of silicone or natural rubber
Top quality and suitable for every membrane press (for film and veneer pressing).
You can purchase our membranes pre-cut to your required dimensions or as roll goods.
SILICONE
Type: MS-2
Color: milky white
Surface: fabric-patterned/smooth
Standard widths: 1680/2000 mm
Polymer base: silicone
Shore/hardness: 50° Shore
Thickness: 3 mm
Operating temperature: min. -50°C / max. 200°C
SILICONE
Type: MS-1
Color: milky blue
Surface: smooth
Standard widths: 1600/1800 mm
Polymer base: silicone
Shore/hardness: 45° +/- 3° Shore
Thickness: 2 mm
Operating temperature: min. -60°C / max. +230°C
NATURAL RUBBER
Type: MNK-2
Color: grey
Surface: smooth/fabric-patterned
Standard widths: 1700–1750 and 2000 mm
Rubber: natural rubber
Shore/hardness: approx. 42° Shore
Kodpfsd S Efajx Adqedu
Thickness: 2.5 – 4.0 – 5.0 mm
Operating temperature: min. -20°C / max. +130°C
NATURAL RUBBER
Two-layer version for waterbed/oil presses
Type: MNK-2 WB
Color: grey/black
Surface: both sides smooth
Standard width: 1700 mm
Rubber: natural rubber
Shore/hardness: approx. 42° / 60° Shore
Thickness: 3.5 – 4 mm
Operating temperature: max. 130°C
Standard SILICONE Type: RSS
Color: red-brown or transparent (other colors on request)
Surface: both sides smooth
Standard length: cut to size or 10 m roll (other lengths on request)
Standard width: 1200 mm – up to 1800 mm on request
Polymer: silicone
Shore/hardness: 30° – 80° Shore
Thickness: 0.5 – 10 mm
iklan kecil

11.170 km
Granulator / cutting mill
NEUE HERBOLDLM 450/1000-S5-2
Hubungi
Kondisi: baru, Granulator
Kdjdockg Raspfx Adqsu
Manufacturer: NEUE HERBOLD
Year of manufacture: NEW MACHINE
Drive: 55 kW
Rotor diameter: 450 mm
Working width: 1000 mm
Rotor with 5 knife rows
2 stator knife rows
Conveyor belt feed hopper
Suitable for size reduction of film waste, canisters, pipes, profiles, punched grids, thermoformed parts, etc.
iklan kecil

12.050 km
Bekas Vac
GEISST7
Hubungi
Kondisi: siap digunakan (bekas), es-🔧 Especificaciones clave
Modelo: DU2000 T7
Año de fabricación: 1995
Tamaño máximo de plancha: 2000 x 1000 mm
Ksdpswnxwkofx Adqedu
Profundidad máxima de conformado: 600 mm
Elementos calefactores: lámparas halógenas (flash)
Características:
Asistencia por tapón
Control de pandeo
Placas portamoldes motorizadas para cambios rápidos de herramienta
de-🔧 Wichtige Spezifikationen
Modell: DU2000 T7
Baujahr: 1995
Maximale Blechgröße: 2000 x 1000 mm
Maximale Ziehtiefe: 600 mm
Heizelemente: Halogen (Blitz) Heizungen
Ausstattung:
Stopfenunterstützung (Plug Assist)
Durchhangkontrolle (Sag Control)
Motorisierte Fensterplatten für schnellen Werkzeugwechsel
fr-🔧 Spécifications principales
Modèle : DU2000 T7
Année de fabrication : 1995
Dimension maximale de la feuille : 2000 x 1000 mm
Profondeur d’emboutissage maximale : 600 mm
Éléments chauffants : radiateurs halogènes (flash)
Caractéristiques :
Assistance bouchon (plug assist)
Contrôle de fléchissement (sag control)
Plaques de fenêtre motorisées pour changement rapide d’outil
pl-🔧 Kluczowe dane techniczne
Model: DU2000 T7
Rok produkcji: 1995
Maksymalny format arkusza: 2000 x 1000 mm
Maksymalna głębokość tłoczenia: 600 mm
Elementy grzewcze: nagrzewnice halogenowe (błyskowe)
Wyposażenie:
Wspomaganie plug assist
Kontrola opadania materiału (sag control)
Zmotoryzowane płyty okienne do szybkiej wymiany narzędzi
Kami memudahkan pencarian untuk Anda: "thermoform"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Thermoform (200)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan