Beli Mesin pelapis pinggir dua sisi bekas (69)

Kondisi: bekas, Double-sided edge banding machine, usable in-line or offline as either first or second machine CNI control system in a separate control cabinet Machine suitable for the 1st and 2nd panel pass Mobile shoulder opening, motorized via N.C., 3200 mm Maximum panel width: 3200 mm Min. – Max. panel height: 10 – 60 mm Edge thickness in coil min – max PVC-ABS: 0.3 – 3 mm Infinitely variable feed speed: 10 – 40 m/min Motorized pressure belt Support track with retractable pins Distance between retractable pins: 500 mm Squaring unit consisting of (per side): - Correction unit with two motors Edging unit consisting of (per side): - Gluing unit with pre-melter for EVA glue - Pressure rollers for edges - Edge magazine with 2 positions Fjdpfskvrxqjx Adqspn - End trimming unit with two motors - Overlapping trimming group - Staggered finishing unit with two motors - Corner rounding unit with 4 motors - 0–90° tiltable milling unit - Edge scraper unit - Brushing unit

Kondisi: bekas, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first or second machine in a sizing and edge banding line Numerical control with Sintra software Machine suitable for first and second panel pass Motorized mobile side opening by CNC, 3000 mm Panel height 60 mm PVC/ABS up to 3 mm Continuously variable feed speed by CNC (up to 40 m/min) Electronically adjustable working height by CNC (up to 60 mm) Mobile side opening electronically adjustable by CNC Motorized pressure belt with increased contact pressure Support rail with concealed pins – distance between pins 500 mm Automatic large panel support system Anti-adhesive unit Squaring/edging section for each side including: * Automatically timed anti-chipping unit * Double pre-milling unit Fpodpfou Rim Hox Adqjn * Dual-motor scoring unit Edgebanding section for each side comprising: * Gluing unit for EVA hot-melt glue with pre-melter * Edge pressing unit for straight profiles with electronically adjustable pressure rollers by CNC * 6-position coil magazine with automatic edge selection by CNC * Trimming unit with 2 motors with automatic tilt * Overlapping trimming unit with 2 motors * Corner rounding unit with 2 electronically adjustable tilting motors by CNC * Multifunction rounding unit with 4 motors (cutter + corner rounding) with CNC automatic control * Milling unit (with 2 motors on fixed left side / with 1 motor with 0–90° tilt on movable right side) * Edge scraper unit electronically controlled by CNC * Glue scraper unit * Oscillating brush unit * Hot air dryer unit

Kondisi: bekas, Tahun pembuatan: 2013, Numerical control PC (office) with Widge Plus software Machine suitable for first and second panel pass Motorized mobile shoulder opening via N.C.: 3200 mm Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil min - max PVC-ABS: 0.3 - 3 mm Continuously variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consisting of (per side): - Anti-adhesive unit - Time-controlled splinter protection system - Double chipping unit Edge section consisting of (per side): - Gluing system with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge holder magazine with 6 positions - Trimming unit with two motors - Overlapping cutting unit - Staggered finishing unit with two electronically NC-controlled motors - Rounding unit with 4 motors 0-90° tilting planing unit, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + double stacked milling spindle (fixed shoulder) Anti-adhesive units Fpjdpfx Adsk Egvdjqen Edge scraper unit Glue scraper unit Brushing unit Phon unit

Kondisi: sangat baik (bekas), KOMPLETTE_DOPPELSEITIGE_FORMAT-UND_KANTENANLEIMMASCHINEN Fjdpfoxftt Ejx Adqspn

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a machine line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized chain conveyors) Cam interval (mm): 270 FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Protection cutter (pre-milling) 75.186 (1 x kW 4.4) Milling unit (2 x kW 6.6) Free position EDGE PROCESSING (for each side): Edgebanding unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 0.66) 30 m/min Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-2 (2 x kW 0.18) Fpedpfx Asum Untsdqsn Free position

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Fsdpfxeu Rc Ano Adqepn Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Fpodpfsu Rc Hyex Adqen Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (option 3000) Cam spacing (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transmission bar (Master & Slave systems) FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Open station EDGE BANDING PROCESSING (for each side): Gluing station (hot melt adhesive) 283.205 Edge pressure zone. Edge magazine for rolls (No. 2 fold) End trimming unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min, servomotor) Fpodpfx Aeu Ekbnsdqsn Milling unit 08.055 (KW 0.66 x 2) 0°-30° Multi-function unit (radius milling and profile milling) 08.342 (KW 0.66 x 2) Sprayer unit (for polishing liquid) Open station (for optional addition of a scraper) Buffing unit 08.617 (KW 0.18 x 2)

Kondisi: bekas, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening via C.N., 1500 mm Panel height: 60 mm PVC/ABS: 3 mm Infinitely variable feed speed Electronically adjustable working height via C.N. Motorized, rubber-coated belt with superior pressure Squaring unit consisting of (per side): * Double trimming unit * Automatic, timer-controlled anti-splintering group Edgebanding unit consisting of (per side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Edgeband pressing unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge changeover Fjdpferxzb Ujx Adqepn * Overlapping trimming unit with 2 motors * Pick-off unit with 2 tilting motors * Profile scraping unit tiltable from 0–90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Fpodpfx Adouhv R Dsqsn Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: bekas, Lini mesin pemrosesan tepi yang telah diperbaiki di pabrik untuk tepi 3 mm Merek: IMA Tipe: Combima terdiri dari: Mesin 1: mesin pemrosesan tepi bekas dari pabrik IMA, tipe COMBIMA Diperbaiki di pabrik dengan garansi 12 bulan - Lebar kerja maks. 1.500 mm, ketebalan tepi sekitar 0,3 - 3 mm - rantai bantalan jarum berputar, penggerak dengan motor 3 kW, kecepatan variabel secara terus menerus dari 9 - 45 m/menit - penyesuaian lebar motorik dengan tampilan nilai target dan aktual elektronik - unit pemotongan ganda dengan 2 motor 4,4 kW, 100 Hz - unit pemotong dengan 1 motor 4,4 kW, 100 Hz - unit pelapisan lem panas dengan magasin 2 rol dan pengumpanan lem panas Quickmelt otomatis - unit pemotong dengan 2 motor 0,4 kW - unit pemotong dan pemotong tepi dengan 2 motor 1,5 kW - unit pembuat chamfer dengan 2 motor 0,6 kW - unit penarik profil - unit penarik datar - unit penggosok/pemoles tepi - kontrol pelurusan Beckhoff dengan layar - konverter elektronik 100 Hz, pabrik KEB - konverter elektronik 200 Hz, pabrik KEB - 1 unit putar bekas untuk mengubah orientasi dari memanjang menjadi melintang - Diperbaiki di pabrik dengan garansi 12 bulan - panjang papan maks. 2.500 mm, lebar papan maks. 1.500 mm Mesin 2: mesin pemrosesan tepi bekas, pabrik IMA, tipe COMBIMA Diperbaiki di pabrik dengan garansi 12 bulan - Lebar kerja maks. 3.000 mm, ketebalan tepi sekitar 0,3 - 3 mm - rantai bantalan jarum berputar, penggerak dengan motor 3 kW, kecepatan variabel secara terus menerus dari 9 - 45 m/menit - penyesuaian lebar motorik dengan tampilan nilai target dan aktual elektronik Fpsdpfx Aozuyqvjdqsn - unit pemotong pelindung dengan motor 3,3 kW, 100 Hz - unit pemotongan ganda dengan 2 motor 4,4 kW, 100 Hz - unit pelapisan tertutup dengan magasin rol ganda dan pengumpanan lem panas Quickmelt otomatis - unit pemotong dengan 2 motor 0,4 kW - unit pemotong dan pemotong tepi dengan 1 motor atas dan 1 motor bawah 0,4 kW - unit pembuat chamfer dengan 2 motor 0,4 kW - unit pemotong salin dengan 2 motor 150 W - untuk memotong sisa strip pada profil bagian depan dan belakang bawah, unit pemotong salin dengan 2 motor 150 W - untuk memotong sisa strip pada profil bagian depan dan belakang atas, unit penarik profil - penarik datar - unit pemoles - penyangga tengah - penarik 800 mm - kontrol pelurusan Beckhoff dengan layar - konverter elektronik 100 Hz, pabrik KEB - konverter elektronik 200 Hz, pabrik KEB Waktu pengiriman setelah pesanan diberikan sekitar 4-6 bulan (tergantung pada beban kerja saat ini dan ruang lingkup pekerjaan yang diinginkan). Konfigurasi mesin individual sesuai dengan permintaan pelanggan dimungkinkan, karena mesin dibongkar hingga rangka dasarnya dan – setelah semua suku cadang aus diganti – dirakit kembali seperti baru.

Kondisi: bekas, nomor mesin/kendaraan: 008412, de-01 Fpjdpfx Asyilxmsdqen

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED FORMATTING AND EDGE BANDING MACHINE – First (1st) machine in a production line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) FORMATTING UNIT (each side): Spraying unit (for liquid non-stick agent) Milling unit (2 x 8 kW) EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (number of compartments): 6 Servo-drive guillotine shear (for cutting edges) Pressure zone (CNC-controlled) Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Fpodpfxjyypi Ue Adqon Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Spraying unit (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°–90° / 180°–270°

Kondisi: diremaj di bengkel (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in laths/strips (min/max) mm: 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMAT PROCESSING (per side): - Spraying device (for liquid anti-adhesive) - Jointing milling unit - 08.379 (2 x 4 kW) Fedoyyya Djpfx Adqspn EDGE PROCESSING (per side): - Gluing unit (hot melt adhesive + premelter) VTG + 283.205 - Pressure zone (CNC controlled) + edge magazine for rolls (No. 6 fold) - End trimming unit 08.42/30/B (2 x 0.66 kW) Max 30 m/min - Milling unit 08.055 (1 x 2 kW) 0°-30° - Contour milling unit (for fine finishing) CNC controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Spraying units (for polishing fluid) - Buffing unit 08.617-2 (2 x 0.18 kW)

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line comprises the following machines: Fpjdpfx Aewxvdcodqen O06027A) Loading station with double pickup station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge-banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310/25/12 O06027D) 2nd double-sided sizing and edge-banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100/25/25 O06027F) Transfer conveyor (on rail) "HOMAG" Model TWL 120/30/02 SS O06027G) Transfer conveyor (on rail) "HOMAG" Model TWL 120/34/02 S O06027H) Unloading station with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 Fsdpfx Adolikvhsqjpn X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), SISTEM LENGKAP (4 ARAH) UNTUK PEMOTONGAN UKURAN DAN PEMASANGAN TEPIN YANG FLEKSIBEL dengan sistem konveyor otomatis dan kontrol lini PC53. Dilengkapi dengan PAKET BERKINERJA TINGGI (kecepatan umpan hingga 60 m/menit) Lini ini terdiri dari mesin-mesin berikut: 206026A) Mesin pemuatan (dua sisi) "BARGSTEDT (HOMAG)" Model TBH 501/D/25/12 206026B) Mesin pemotong ukuran dan pemasangan tepin satu sisi (kiri) "HOMAG" Model KFL 612/16/A3 Fedpfx Adjzwlaboqjpn 206026C) Mesin pemotong ukuran dan pemasangan tepin satu sisi (kanan) "HOMAG" KFR 612/18/A3 206026D) Jalur rol penggerak "HOMAG" Model TRL 100/35/12 206026E) Sabuk penggerak untuk belokan 90° "HOMAG" Model TRL 100/35/12 206026F) Transfer sudut berkinerja tinggi (90°) "HOMAG" Model TWR 320/30/12 206026G) Mesin pemotong ukuran dan pemasangan tepin dua sisi "HOMAG" Model KFR 526/9/A3/30 206026H) Stasiun putar "HOMAG" Model TDR 510/30/12 206026I) Mesin penumpukan (dua sisi) "BARGSTEDT (HOMAG)" Model TSH 501/D/25/12

Kondisi: sangat baik (bekas), Mesin Solo dua sisi (atau mesin 1° dan/atau 2° dalam satu jalur mesin) Material rol (tepi), ketebalan (min/maks) mm 0,3 / 3 Ketebalan tepi pada strip/bilah (min/maks) maks. mm 1,0 Ketebalan panel (min/maks) mm 8 / 45 (60) Lebar kerja (min/maks) mm 236 (266) / 3300 Sistem kontrol / perangkat lunak ICOS Open (berbasis Windows) Kecepatan umpan (dapat diatur) m/menit 10 - 50 Kabin pelindung dan peredam suara PEMROSESAN UKURAN (untuk setiap sisi): Pemotong pelindung (pemotongan alur) 75.186 (1 x Kw 4,4) Unit pemotongan (2 x Kw 6,6) + ruang kosong BAGIAN PENEMPEL TEPi (untuk setiap sisi): Pemanas, untuk memberikan panas ke sisi benda kerja Unit pelapis (lem lelehan panas) 04.1570 Zona tekanan + majalah tepi untuk rol (no. bagian) 2 Unit pemotong 08.42 (2 x Kw 0,66) 30 m/menit (0°-25°) Unit pemotong alur awal 08.0555 (1 x Kw 0,66) Unit multifungsi (pemotongan radius dan unit pemotongan bentuk) MFA 08.342 (2xKw 0,66) SERVO Maks 20m/menit Unit penarik profil 08.519 Unit penarik datar 08.50 Unit penyemprot (untuk cairan pemoles) Unit penggosok 08.617-2 (2 x Kw 0,18) Unit pemotong universal untuk membuat alur/meratakan dan membentuk profil: 75.30 (2 x Kw 4,4) Fpjdpfjwz Ic Aox Adqsn OPSIONAL: Sistem retraksi otomatis

Kondisi: bekas, nomor mesin/kendaraan: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Working units, right side: 8 units Fpodpfxowuz R He Adqen Working units, left side: 9 units

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Control system: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (per side): Pre-milling cutter (trimming) 1 x 4.5 kW (hydro) Milling unit KD 11 (2 x 8.1 kW) hydro EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot No. 6) Edge pressure zone "C" Fedelikydjpfx Adqepn Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free slot

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINES – First (1st) machine in a line Fodpsl Hydmefx Adqopn Edge material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: approx. 230 / 1600 Control / Software: WinEdge Feed speed (variable) m/min: approx. 10 - 30 Protective and soundproof cabins FORMATTING UNITS (per side): No. 2 hogging units (2 x approx. 5.8 kW) No. 2 jointing-milling units aft (2 x approx. 4 kW) EDGE BANDING SECTION (per side): Gluing unit (hot melt glue + pre-melter) Pressure zone (CNC-controlled) Magazine for edge rolls (number of slots): 6 Pre-milling unit 08.055 (2 x approx. 1 kW) Milling unit (2 x approx. 0.5 kW, 0°-30°) No. 5 universal milling units for grooving, rebating, and profiling (5 x approx. 4 kW) Profile scraper unit Flat scraper unit Spraying unit (for polishing fluid) Buffing unit + hot air blower – edge finishing

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 No transmission bar (Master & Slave systems) Top pressure with V-belt drive Spraying unit (for liquid anti-adhesive) Jointing milling unit 08.376 (KW 4.5 x2) Free slot Gluing unit (hot melt adhesive) 04.1570 Fpedsd Rcigspfx Adqsn Edge pressure zone Edge magazine for rolls (No. of compartments) 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multi-function unit (radius milling and contour milling unit) 08.342 (KW 0.66 x 2) Profiling scraper unit 08.519 Flat scraper unit 08.50 Spraying unit (for polishing fluid) Buffing unit 08.612 Free slot (for groove / rebate unit)

Kondisi: sangat baik (bekas), 4-sided FORMAT AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Comprising the following machines: A) Loading unit "IMA" (bridge design) with double pick-up station, featuring a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided formatting and edge banding machine "IMA" model Combima/N/II/230/A/R3 (1300 mm) C) Rotating unit (for longitudinal-to-transverse orientation) "IMA" Fpjdpfxeyyb Suo Adqjn D) 2nd double-sided formatting and edge banding machine "IMA" model Combima / II / 740 / B / R3 + (3300 mm) with KFA 30 (contour milling unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical drilling supports) F) Motorized roller conveyor "IMA" G) Rotating unit (for transverse-to-longitudinal orientation) "IMA" H) Stacking unit "IMA" (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transport of panel stacks from the unloader.

Kondisi: sangat baik (bekas), Double-sided single machine (first machine in a production line) Edgebanding material (thickness min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 240 / 1000 Control / Software: NC 21 / Homatic Feed speed (adjustable) m/min high speed: 10 - 60 Safety and soundproof enclosures Fjdpjifnxxsfx Adqspn PROCESSING STATIONS (each side): Trimming unit KD 10 (2 x 6.6 kW) EDGEBANDING SECTION (each side): Edgebanding unit (hot melt glue + pre-melter) A3 + A34 (high speed package) Pressure section Edge magazine for rolls (compartment no.): 2 Pre-milling unit 2 x 0.55 kW Milling unit 2 x 0.55 kW (0° - 30°) Finishing unit (scraper blades + buffing unit) FA 11 Universal milling unit for grooving, rebating, and profiling UF11 (1 x 4 kW) 0°-90°

Kondisi: sangat baik (bekas), 4-sided formatting and edge banding line Panel dimensions: min. 195 x 250 x 60 mm / max. 1200 x 2500 x 60 mm The line consists of the following machines: KZ0400a) Infeed table "HOMAG" model TBL 100/25/12/S with motorized rollers Feed speed (adjustable): 7–40 m/min KZ0400b) First double-sided formatting and edge banding machine "HOMAG" model KFL 325/M1/C Fpsdpfjiztxysx Adqjn Feed speed (adjustable): 15–40 m/min with PC 22 FORMATTING SECTION: Double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine EDGEBANDING SECTION: Top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), Groove milling unit for rebates and grooves UF11 (4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) KZ0400c) Rotating station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/25/12 (from longitudinal to transverse) Feed speed (adjustable): 20–60 m/min KZ0400d) Second double-sided formatting and edge banding machine "HOMAG" model KFL 326/M2/C Feed speed (adjustable): 15–32 m/min with PC 22 FORMATTING SECTION: Pre-milling cutter (chamfering) (1 x 4.5 kW), double hogger KD10 (2 x 6.6 kW) + Gluing unit: A3 with double roll magazine EDGEBANDING SECTION: Cross-cutting unit HL 84 (2 x 0.22 kW), top and bottom flush trimming unit BF10 (2 x 0.55 kW), PC-controlled fine trimming unit PF20 (2 x 0.4 kW), profile copying milling unit FF32 (4 x 0.4 kW), open position, profile scraping unit PN10, finishing unit (flat scraper + smoothing unit) MINIMUM EDGE LENGTH 70 MM (workpiece thickness for narrow parts max. 25 mm, edge thickness max. 2 mm, cycle speed: max. 20 pcs/min, feed speed max. 20 m/min.)