Beli Mesin pelapis pinggir dua sisi bekas (70)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Spraying device (for liquid anti-adhesive) Hedpfx Ast N H Taog Rsni Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and soundproofing cabin Cam spacing (mm): 500 Panel processing (per side): Spray unit (for liquid non-stick agent) Pre-milling unit: 1 x 4.5 kW Chipper KD 11 (2 x 6.6 kW) LEFT SIDE: Universal milling unit (electropneumatically controlled), SF 20 (1 x 6.6 kW), 0°-90° RIGHT SIDE: Free position / slot EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot no. 6). Edge pressure zone "A" (1 + 4 rollers) End trimming unit HL 04 (2 x 0.18 kW) Pre-milling unit OPTIMAT (2 x 0.55 kW) Multi-function unit (radius and profile milling) FK 11 - 2 x 0.4 kW Multi-profile scraper unit PN 20 Flat scraper unit (pneumatic) Hnodpjhvi E Ijfx Ag Roi Buffing unit (2 x 0.25 kW)

Kondisi: sangat baik (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 Working width (min/max) mm: 225 - 3,000 Control/Software: Power Control PC 22 – Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam spacing (mm): 400 SIZING (for each side): - Protective cutter (pre-milling): 1 x 4.5 kW - Chipping cutter KD 11 (2 x 6.6 kW) EDGE BANDING SECTION (for each side): Hedpep N D Ngefx Ag Rjni - Gluing unit (hot-melt glue + premelter): A3 + SERVO - Edge pressure zone “A” - Edge magazine for rolls (magazine slot no. 2) - End trimming unit HL 84 (2 x 0.22 kW) - Pre-milling unit (2 x 0.55 kW) - Milling unit 2 x 0.4 kW - Profile milling unit (copy) FF 12 (4 motors x 0.4 kW) LEFT SIDE: 2 x universal milling units (electropneumatic control) UF 11 (4 kW x 2) 0°-90° RIGHT SIDE: 1 x universal milling unit (electropneumatic control) UF 11 (4 kW x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + polishing unit) FA 11

Kondisi: sangat baik (bekas), FORMAT and EDGE-BANDING LINE for SINGLE-SIDED POSTFORMING OPERATIONS (FOR DIRECT PROCESS) Consisting of the following machines: A) Double-sided gantry feeding system “TREVISAN” with motorized roller conveyor B) HOMAG single-sided POSTFORMING MACHINE FOR DIRECT PROCESS Mod. Profi VFL79/3/P/A - Max. laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit, 2.2 kW (for top grooving) Hodpenzhxqsfx Ag Rsni - 02° Hogging unit, 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit, 6.6 kW (for rebate milling from above), motor shaft for hydro clamping - 04° Standard milling unit, 6.6 kW (for rebate milling from below) 0° - 120° (with hydro clamping) - 05° Radius milling unit, 0.7 kW (for profiling corners) - 06° Milling unit for top layer at U-profiles, HSK25, 1.85 kW - 07° Universal milling unit UF 11, 4 kW (for grooving or rebating) - 08° Milling unit, 2.2 kW (for chamfer and laminate flap milling above) - 09° Milling unit, 2.2 kW (for bottom bending groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 – 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° – 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate break-outs) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for max. workpiece thickness 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Roll cutter above - 18° Milling unit above, 1 x 0.55 kW, 0° – 30° - 19° Polishing unit above with oscillation, 1 x 0.25 kW C) Double-sided gantry stacking system “TREVISAN” with motorized roller conveyor

Kondisi: sangat baik (bekas), Double-sided sizing and edge banding line (short line) max. working width 2500 mm, with automatic high-speed feed system: O02006A) Loading table with roller conveyors "HOMAG" PROFI TBL100/30/12 O02006B) Turning device (longitudinal/transversal), "HOMAG" PROFI TDL /310 /25 /12 Hnedpfxsv D U Urj Ag Rsi O02006C) Double-sided sizing and edge banding machine "HOMAG" Model PROFI KFL 526/10/A3/25 O02006D) Turning device (transversal/longitudinal) "HOMAG" PROFI TDL 510/25/12

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Cam pitch (mm): 500 Hnodpfx Agou Rc Anj Roi FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Hnjdpfx Agju Rc Hyj Rji Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness for rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Retractable alignment stops, spacing (mm): 1000 EDGE PROCESSING (for each side): Protective cutter (pre-milling) (1 x kW 4.5) Chip breaker KD 11 (2 x kW 6.6) Jointing milling unit UF 20/S2 (2 x kW 4) EDGE BANDING SECTION (for each side): Gluing unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA/PU glue) Edge magazine for rolls (slot No. 2) Edge pressure zone (CNC-controlled) type A End trimming unit HL 84 CHAMFER/STRAIGHT (2 x kW 0.22) Feed speed 25 m/min Pre-milling unit BF10 (2 x kW 0.55) Multifunction unit (radius milling and contour milling unit) FK11 (2 x kW 0.4) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + buffing unit) FA 11. Spraying unit (for polishing liquid) No. 2 Universal milling units for grooving/rabbetting and profiling SF20 (2 x kW 6.6) Hnedpfx Agjuhv R De Rei Powered panel infeed roller conveyor with singulation system "HOMAG" Mod. POWER TBL 100/20/25

Kondisi: bekas, nomor mesin/kendaraan: 008266, typ-der-angbrachten-kante-20240618 Hnedpjx A Hfijfx Ag Rji

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, lebar benda kerja (maks.): 2.500 mm, panjang benda kerja (maks.): 200 mm, kecepatan rotasi (maks.): 18.000 rpm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 2,500 mm Minimum panel width: 130 mm Maximum panel height: 50 mm Minimum panel height: 8 mm Maximum panel length: 200 mm Minimum panel length: 30 mm UNITS Trimming Unit Unit: Trimming Automatic adjustment (time-controlled) Motor power: 2.2 kW Maximum speed: 6,000 rpm Magazine for coil feed Hnedpfexxavtox Ag Roi Number of positions: 1 Glue application system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge Processing Unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Maximum speed: 18,000 rpm Edge Processing Unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Maximum speed: 18,000 rpm Edge Processing Unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge Processing Unit 4 Unit: Brush Number of motors: 2 Edge Processing Unit 5 Unit: Top router Number of motors: 1 Edge Processing Unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Total installed power: 12 kW Glue system: PUR Pressure type: Rubber-coated belts Number of trimming units installed: 1 Number of edge processing units installed: 6 EQUIPMENT Spray unit CE marking

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 3.000 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 40 m/menit, kecepatan rotasi (maks.): 6.000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format cutting unit Unit: double top and bottom pre-milling Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for coil No. of positions: 12 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Edge pressure roller track Edge Processing Unit 1 Unit: end trimming No. of motors: 2 Edge Processing Unit 2 Unit: top trimming Hjdpfx Aoxxal Isg Rjni No. of motors: 2 Edge Processing Unit 3 Unit: edge trimming No. of motors: 2 Edge Processing Unit 4 Unit: edge trimming No. of motors: 2 Edge Processing Unit 5 Unit: top trimming No. of motors: 2 automatic engagement by timer Edge Processing Unit 6 Unit: edge scraper Edge Processing Unit 7 Unit: glue scraper Edge Processing Unit 8 Unit: buffing station No. of motors: 2 EQUIPMENT PUR gluing system

Kondisi: bekas, nomor mesin/kendaraan: 005637, Jenis tepi yang dipasang: tepi tipis, tepi tebal Sistem lem: EVA Mesin pelapis tepi: Mesin 1 Lebar panel maksimum: 1300 mm Kecepatan maju maksimum: 50 m/menit Unit kerja, sisi kanan: 11 unit Hjdpfx Agsvw Ev Hj Rsni Unit kerja, sisi kiri: 12 unit

Kondisi: bekas, nomor mesin/kendaraan: 005639, Jenis tepi terpasang: tepi tipis, tepi tebal Sistem perekat: EVA Unit multifungsi: ya Mesin pelapis tepi: Mesin 1 & 2 Lebar panel maksimum: 3000 mm Kecepatan pengumpanan maksimum: 50 m/menit Hnodpfxovw Evgs Ag Roi Unit kerja, sisi kanan: 12 unit Unit kerja, sisi kiri: 12 unit

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edge Banding: min/max 14-65 mm Thickness: min 0.3 mm Max ABS size: 3 x 35 mm Panel thickness: min/max 60 mm Panel size: 220-3200 mm Working edge: 30-75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units included: 1+1 Pre-milling units, 4 kW, pneumatic 1+1 Air blast unit for cleaning workpieces 1+1 Gluing station / hot-melt adhesive unit GR_HMP-P HM-P EDGE GLUING DEVICE FOR STRAIGHT EDGES Designed for bonding straight panel edges using a hot-melt adhesive with removable tank Tank and pre-melter for rapid melting The unit includes: A Adhesive tank B Strip holding table C Pneumatic equipment box Hodpfxotrgy Ne Ag Rjni D Support base for strip storage E Guillotine shear F Side pressure unit G Glue unit inclination adjustment H Mobile tabletop 1+1 Edge strip feeder, 5-station 1+1 End trimming unit 0.35 kW, 12,000 rpm 1+1 Corner copying unit, 1 kW, 12,000 rpm 1+1 Chamfering unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 Edge rounding unit with two 0.35 kW motors 1+1 Trimming unit, 4 kW, right side, left side empty (U28+U55), diameter 125 mm, 12,000 rpm 1+1 Self-adjusting scraper RCA 95 1+1 Brush/buffing unit 0.29 kW, 1,500 rpm SPO (150/50 x 50 mm) 1+1 ABS strip color brightener, 1,600 W

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: AH/003306, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 3.200 mm, kecepatan pemakanan sumbu X: 40 m/menit, DETAIL TEKNIS Bukaan bahu mobile: 3.200 mm Lebar panel maks.: 3.200 mm Tinggi panel min.: 10 mm Tinggi panel maks.: 60 mm Ketebalan edging gulungan, minimal PVC-ABS: 0,3 mm Ketebalan edging gulungan, maksimal PVC-ABS: 3 mm Kecepatan pengumpanan: 10 - 40 m/menit Jarak antar pin tarik: 500 mm Hnedpexx N D Hjfx Ag Roi PERLENGKAPAN Sabuk penekan karet bermotor Konveyor dengan pin tarik Kontrol CNI pada panel kendali terpisah Unit penyearah dengan dua motor (untuk setiap sisi) Unit lem dengan pre-melter untuk lem EVA Rol penekan edging Magasin penahan edging dengan 2 posisi Unit pemotongan dengan dua motor Grup trim tumpang tindih Unit finishing bertingkat dengan dua motor Agregat pembulatan dengan 4 motor Unit milling miring 0-90° Unit pembersih edging Grup sikat

Kondisi: bekas, Double-sided edge banding machine, usable in-line or offline as either first or second machine CNI control system in a separate control cabinet Machine suitable for the 1st and 2nd panel pass Mobile shoulder opening, motorized via N.C., 3200 mm Maximum panel width: 3200 mm Min. – Max. panel height: 10 – 60 mm Edge thickness in coil min – max PVC-ABS: 0.3 – 3 mm Infinitely variable feed speed: 10 – 40 m/min Motorized pressure belt Support track with retractable pins Distance between retractable pins: 500 mm Squaring unit consisting of (per side): - Correction unit with two motors Edging unit consisting of (per side): - Gluing unit with pre-melter for EVA glue - Pressure rollers for edges - Edge magazine with 2 positions Hsdpfx Agekvrxqs Reni - End trimming unit with two motors - Overlapping trimming group - Staggered finishing unit with two motors - Corner rounding unit with 4 motors - 0–90° tiltable milling unit - Edge scraper unit - Brushing unit

Kondisi: bekas, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first or second machine in a sizing and edge banding line Numerical control with Sintra software Machine suitable for first and second panel pass Motorized mobile side opening by CNC, 3000 mm Hnodpfsu Rim Hex Ag Roi Panel height 60 mm PVC/ABS up to 3 mm Continuously variable feed speed by CNC (up to 40 m/min) Electronically adjustable working height by CNC (up to 60 mm) Mobile side opening electronically adjustable by CNC Motorized pressure belt with increased contact pressure Support rail with concealed pins – distance between pins 500 mm Automatic large panel support system Anti-adhesive unit Squaring/edging section for each side including: * Automatically timed anti-chipping unit * Double pre-milling unit * Dual-motor scoring unit Edgebanding section for each side comprising: * Gluing unit for EVA hot-melt glue with pre-melter * Edge pressing unit for straight profiles with electronically adjustable pressure rollers by CNC * 6-position coil magazine with automatic edge selection by CNC * Trimming unit with 2 motors with automatic tilt * Overlapping trimming unit with 2 motors * Corner rounding unit with 2 electronically adjustable tilting motors by CNC * Multifunction rounding unit with 4 motors (cutter + corner rounding) with CNC automatic control * Milling unit (with 2 motors on fixed left side / with 1 motor with 0–90° tilt on movable right side) * Edge scraper unit electronically controlled by CNC * Glue scraper unit * Oscillating brush unit * Hot air dryer unit

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control unit POWER CONTROL PC 22 Machine suitable for the 1st and 2nd processing pass of the panel Mobile, NC-controlled shoulder opening, motorized, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Anti-adhesive unit Time-controlled, automatic chip protection unit Double trimming unit Hnodpfx Aopp Tkfsg Roi Provision for group extension at each station Glue application unit with premelter and glue pot Automatic adjustment of edge pressure rollers Edge holder magazine with 2 positions End trimming unit with two motors Overlap cutting unit Corner rounding unit (FK group) Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit

Kondisi: bekas, Tahun pembuatan: 2013, Numerical control PC (office) with Widge Plus software Machine suitable for first and second panel pass Motorized mobile shoulder opening via N.C.: 3200 mm Hodpfx Agok Egvde Rsni Panel width min - max: 215 - 3200 mm Panel height min - max: 10 - 60 mm Edge thickness in coil min - max PVC-ABS: 0.3 - 3 mm Continuously variable feed speed: 10 - 40 m/min Motorized pressure rubber belt Support track with retractable pins Pin height: 12 - 18 - 25 mm Distance between retractable pins: 500 / 400 mm Working units mounted on NC-motorized top tables Squaring section consisting of (per side): - Anti-adhesive unit - Time-controlled splinter protection system - Double chipping unit Edge section consisting of (per side): - Gluing system with premelter for PUR adhesive and premelter for EVA adhesive - Edge pressure rollers electronically controlled by N.C. - Edge holder magazine with 6 positions - Trimming unit with two motors - Overlapping cutting unit - Staggered finishing unit with two electronically NC-controlled motors - Rounding unit with 4 motors 0-90° tilting planing unit, electronically CN-controlled (mobile shoulder) 0-90° tilting milling unit + double stacked milling spindle (fixed shoulder) Anti-adhesive units Edge scraper unit Glue scraper unit Brushing unit Phon unit

Kondisi: bekas, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening via C.N., 1500 mm Hnedpfx Agerxzb Uj Rsi Panel height: 60 mm PVC/ABS: 3 mm Infinitely variable feed speed Electronically adjustable working height via C.N. Motorized, rubber-coated belt with superior pressure Squaring unit consisting of (per side): * Double trimming unit * Automatic, timer-controlled anti-splintering group Edgebanding unit consisting of (per side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Edgeband pressing unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge changeover * Overlapping trimming unit with 2 motors * Pick-off unit with 2 tilting motors * Profile scraping unit tiltable from 0–90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit