Beli Fp1 bekas (163)

Kondisi: diremaj di bengkel (bekas), Universal Tool Milling Machine Deckel FP1: Technical Specifications: -Traverse (X): approx. 300 mm -Traverse (Y): approx. 150 mm -Traverse (Z): approx. 340 mm -Tilting angle table Iodpfxohv H Sps Adqeih -Clamping surface: 260 x 600 mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds: 20 - 2000 rpm -Speed range - vertical: 60 - 1200 rpm -Speed range - horizontal: 95 - 1900 rpm -Spindle speed stages: 12 -Feed rate: 10 - 500 mm/min -Feed steps: 10 -Spindle taper: MK 4 -Vertical quill stroke: 60 mm -Total power requirement: 1.7 kW -Approx. machine weight: 0.8 t -Space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of Overhaul: -Complete renewal of the electrical system (professionally done with wiring diagram!) -Cleaning -Polishing of all bare metal surfaces -New paintwork -Replacement of various plates -Replacement of all standard parts (screws, handles, levers, handwheels, oil sight glasses, etc.) -Bearing and sealing of the upper gear shaft -Sealing of the coolant pump -Conversion of feed axes to safety handwheels -New installation of coolant hoses -Adjustment of gib strips and axis clamps Upon request, the machine can be equipped with glass scales on all axes. The machine can be inspected and tested by appointment. We will be happy to offer machine transport and various accessories upon request.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Deckel FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Controller: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Iiedpfx Adexnniaoqsh Z travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Controller: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Dimensions (LxWxH): approx. 1200x1100x1600 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin frais Deckel FP1. Iisdexnxkujpfx Adqoh Kondisi sangat baik. Berfungsi penuh.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, DECKEL FP1 tool milling machine + tool cabinet with contents (tool holders and tools, see photos) Isdpfx Aew Hnx Isdqoih Operational. Price: €9,700 (+ VAT) Disassembly on site and transport are the responsibility of the buyer.

Kondisi: baik (bekas), de2en-001 Iodpfxsxmggus Adqjih

Kondisi: baik (bekas), Nomor gudang: 3010 Pabrikan: Deckel Nomor mesin: 31488 Tipe / model: FP 1 Jarak sumbu x-y-z: 300 - 150 - 340 mm Meja: 600 x 200 mm Kisaran putaran: 40 hingga 2.000 rpm Isdpsw D N Thofx Adqjih Jenis spindle: MK 40 Feeder: 16 hingga 500 mm/menit Daya listrik: 1 / 1,5 kW Aksesori/perlengkapan: Display digital Elesta Kondisi: baik Berat: 0,8 t Ukuran: 800 x 1.000 x 1.800 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Typ: 2034 Nr. 374, penjepit spindle: MK 2, Winkel milling head for Deckel FP1 and FP2, diameter 70 mm and 80 mm, compatible with Deckel milling machines FP1 and FP2. Iodpfx Ajxk T Hijdqoih The angular milling head is 360° rotatable and is a used item. The spindle is in very good condition and is an original Deckel angular milling head, type 2034, serial no. 374. The spindle has only been used by us for precision machining applications. Technical data for the angular milling head: - Tool spindle with MK2 tool holder - Suitable for collets type: Morse taper 2 (with internal thread) The spindle is supplied with a reducing sleeve. Reducing sleeve: (for FP1) - Outer diameter: 80 mm - Inner diameter: 70 mm (A reducing sleeve is not required for FP2) Weight: - Tool milling spindle: 6.5 kg - Reducing sleeve: 0.8 kg - Total weight: 7.3 kg Price: Ex works Payment terms: Cash payment upon pickup or prepayment Delivery: Shipping via DHL parcel service is possible. Self-collection is also possible. Terms of delivery: We deliver according to the Machineseeker Standard Contract for Used Machinery Sales. A standard contract can be downloaded from Machineseeker. Availability: Immediately available.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 360 mm, For sale is a Deckel FP1 milling machine featuring 3-axis active control. The machine is fully functional and undergoes inspection, cleaning, and storage at our goods-in area upon arrival. Technical Data: - Digital display - 3-axis active digital readout by HEIDENHAIN - Travel range X-axis: 300 mm - Travel range Y-axis: 160 mm - Travel range Z-axis: 340 mm - Tool holder: SK 40 Iedsr H E Uijpfx Adqjih - Milling head type: Vertical milling head - Spindle speed range: 40 - 2000 rpm - Number of speed steps: 16 - Table feed X-axis: 290 mm - Table feed Y-axis: 150 mm - Table feed Z-axis: 330 mm - Weight: 650 kg - Dimensions: 1200 x 1100 x 1800 mm Accessories: - Active feed on X, Y, and Z axes - Coolant system This offer is for the machine only, tools are not included but can be negotiated separately. Upon request and for an additional charge, loading and transport within Europe can be arranged. Prices are exclusive of VAT. Viewing is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange accepted! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feeds, very good condition, CE compliant Technical data: >> Year of manufacture: 1992; Machine no. 2102-6209 >> Rigid angle table (newly planed) >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100mm >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Iisdpfx Asxdi Ivsdqjh >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speed the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, making the machine easier to transport. On this newer FP1 model, feed on all three axes is steplessly adjustable, and the machine also offers rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control, you can enter dimensions which the machine will then automatically approach. The FP1 was previously in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this machine under power onsite.

Kondisi: baik (bekas), Tahun pembuatan: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK40 spindle taper. Good, operational condition, can be demonstrated under power by arrangement. Iijdpfjwg S I Tjx Adqsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically graduated direct transmission with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Iijdpfx Asv Nqu Eedqoh Quill: Extendable quill, vertical travel 60 mm, SK40, M16 drawbar thread Axes: X/Y/Z 300/160/340 mm Swivel table: 600 x 210 mm, max. load capacity 200 kg

Kondisi: baik (bekas), Nomor gudang: 3009 Pabrikan: Deckel Nomor mesin: 37036 Tipe / Model: FP 1 Perjalanan sumbu x-y-z: 300 - 150 - 340 mm Meja: 600 x 200 mm Iedpfx Adewy Dl Roqjih Rentang putaran: 40 hingga 2.000 rpm Kepala spindle: MK 4 Feeder: 16 hingga 500 mm/menit Daya terpasang: 1 / 1,5 kW Aksesori/Perlengkapan: Display digital Heidenhain Kondisi: baik Berat: 0,8 t Dimensi: 800 x 1.000 x 1.800 mm

Kondisi: baik (bekas), Mesin Frais Alat DECKEL FP 1 dengan Digital Display Aktif 3 Sumbu TNC 113 dari institusi pendidikan - Perjalanan sumbu X/Y/Z: 300x160x340 mm - Rentang kecepatan putar: 40-2000 rpm - Feed tak terbatas pada ketiga sumbu - Gerak cepat pada ketiga sumbu - Kepala vertikal dapat digeser 100 mm - Perlengkapan frais vertikal - horizontal - Dudukan alat ISO 40 - Daya penggerak 1,5 / 1,9 kW - Meja sudut tetap - Wadah serpihan - Sistem pendingin - Lampu kerja - Dokumentasi Dimensi: Isdpfxjw Rbxns Adqoih P x L x T 1,3 x 1,2 x 1,7 meter / Berat 900 kg Kesalahan dan kekeliruan data dapat terjadi.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 160 mm, panjang umpan sumbu Z: 340 mm, For sale: Conventional milling machine by Deckel, model FP1 Thanks to its compact size, this machine is ideal for quick tasks in confined spaces. The machine is fully functional. Technical specifications: - X-travel: 300 mm - Y-travel: 160 mm Iedpougv Hvefx Adqsih - Z-travel: 340 mm - Tool holder: SK40 - Spindle speed: 40-2000 rpm - Control: Conventional - Table size: 600 x 210 mm - Total power requirement: 2 kW - Machine weight: approx. 0.73 t - Required space: approx. 1200 x 1100 x 1600 mm Loading and shipping can be organized Europe-wide upon request. All prices are subject to VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent condition Technical data: >> Year of manufacture approx. 1990 Machine No. 2102-5231 >> Rigid angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on the spindle carrier Iiodpfx Asu Rn Tlodqsh >> Vertical quill and horizontal quill - ISO 40 taper >> Drawbar system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a universal milling machine Deckel FP1 in very good condition, finished in light grey. The machine has minimal backlash and all feed screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed rate in all three axes is continuously variable, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain tracking control, dimensions can be entered and the machine will automatically position itself accordingly. The FP1 was used in a training facility, where it was only operated occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test this gem under power on site.

Tahun pembuatan: 1981, Kondisi: baik (bekas), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout, swivel table. SK 40 spindle taper. Good operational condition. The machine can be demonstrated under power by prior arrangement. Iiedpfshg Embox Adqsh

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: Ijdeu R D I Sspfx Adqjih >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Tahun pembuatan: 1980, Kondisi: baik (bekas), Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK40 spindle taper. Good, operational condition, can be demonstrated under power by arrangement. Isdpfod Id N Rox Adqoih

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 Iodpfx Adou Nvwvoqoih >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm Iisdpfju T D Nrex Adqsh >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and 3-Axis Infinitely Variable Feed – Excellent Condition Technical Specifications: >> Year of manufacture: 1983 >> Machine number: 2102-2444 >> Fixed angular table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100mm Iijdpfx Ajtwlwzedqjh >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout by K+C, newly installed with manufacturer’s warranty and user manual. Display unit: set reference points, zero points, input coordinates, mm/inch conversion, absolute or incremental coordinates, circular functions, bolt hole patterns, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1983, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed in all three axes; additionally, it has rapid traverse in these axes. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The new K&C digital readout makes work more convenient and even more precise. Take advantage of the opportunity to inspect and test this outstanding machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Stepless Feed – Excellent Condition Technical Specifications: >> Year of manufacture: 1990 Machine No.: 2102-5046 >> Fixed Angle Table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300 / 160 / 340 mm Iedpfsu Um Ersx Adqoih >> Vertical milling head adjustment on column: 100 mm >> Vertical quill and horizontal quill – SK40 taper >> Drawbar system: S20x2 >> Weight approx. 800 kg Equipment and Accessories: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts diagram Remarks about the machine: Offered is a Universal Milling Machine Deckel FP1, year 1990, in excellent condition. The machine exhibits minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs extremely quietly. On this newer FP1 model, the feed is steplessly adjustable in all three axes, and it is also equipped with rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain control, dimensions can be entered and the machine approaches them automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes working easier and even more precise. Take the opportunity to inspect and test this outstanding machine on site under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Iodpou Racrsfx Adqsih >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet Iedpfjvb Ud Ujx Adqoih About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: Iodpfjt Aarpsx Adqsih >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.