Beli Ima bekas (133)

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) Ksdpfofi Tg Hex Aahjfa No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Penggerak Utama Rentang kecepatan spindle: 12000 rpm Edgebander IMA NOVIMAT I /G80/390/R3 ini diproduksi pada tahun 2013. Dilengkapi dengan dua motor 4,5 kW pada 150 Hz, mencapai kecepatan hingga 9000 rpm. Mampu menangani ketinggian pinggiran dari 14 hingga 65 mm dan diameter rol hingga 850 mm, sangat ideal untuk kebutuhan edgebanding yang presisi. Pertimbangkan kesempatan untuk membeli IMA NOVIMAT I /G80/390/R3 edgebander ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Kodjx D Nh Ajpfx Aahsfa Pelapis Tepi

Kondisi: sangat baik (bekas), Zum Anleimen von Kanten an gerade, runde und profilierte Werkstücke - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Coil-/Rollenhaltertisch - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenbanddicke: 0,4 bis 3 mm - Schwenkbarer Tisch 0°-45° Kfjdpshgbfaefx Aahea - Gesamtinstallierte Leistung ca. 4 kW

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Penggerak Utama Jumlah sumbu: 4 Kfjdpfx Aex D Nylsahsa Pusat pemrosesan CNC IMA BIMA 400 140 / 430 4-sumbu ini diproduksi pada tahun 2008. Mesin ini dilengkapi spindle utama dengan daya 7,5 kW, sumbu putar NC, dan majalah penukar alat dengan 18 posisi. Dilengkapi unit pengeboran dengan 14 spindle serta unit gergaji/milling/pengeboran 5-sumbu, menawarkan kapabilitas pemrosesan yang serbaguna. Pertimbangkan kesempatan untuk membeli pusat pemrosesan CNC IMA BIMA 400 140 / 430 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi: Pemrosesan Kayu CNC

Kondisi: sangat baik (bekas), CNC Machining Center (Point-to-Point) – 5 Axes (ROBOT Head) Gantry-type construction Control system: ICOS CNC – Software: IMAWOP / (Optional: IMAwinCAD) Safety enclosure for the working head Clamping table with 8 consoles LED positioning system on the X-axis for console placement and Y-axis for vacuum clamp positioning Automatic tool change system 2 rotary tool changers – magazine/tool positions (8) + TC8 (18) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity: 140 m³/h) Separate electrical and control cabinet. Total connected load: 23 kW Kjdjfin Sajpfx Aahjfa WORKING UNITS (TOP SIDE): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (Drilling head motor power: 1.2 kW x 4) 1 grooving saw unit, diameter 125 mm, swivels 90° in X-Y direction 1 vertical main spindle (milling unit) Robot head (HSK F63) Vertical main spindle power: 9 kW Independent Z-axis with 650 mm stroke A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Pergerakan Kedpfx Aaex D Etuohofa Pergerakan Sumbu-X: 6000 mm Pergerakan Sumbu-Y: 1200 mm Mesin woodworking 3-sumbu IMA BIMA/410/120/600 ini diproduksi pada tahun 2011. Mesin ini memiliki kedalaman kerja 1200 mm dan lebar kerja 6000 mm, yang dapat dibagi menjadi dua area kerja masing-masing 2400 mm ditambah area keamanan 1200 mm. Dengan pengaturan “kepingan kerja panjang”, lebar kerja penuh dapat digunakan. Kesempatan bagus untuk membeli mesin woodworking IMA BIMA/410/120/600 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin woodworking ini. Jenis Aplikasi CNC Pengolahan Kayu

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Kfedpfx Asflc Uhoahoa Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Upper pressure: driven by V-belt Spraying unit (for liquid release agent) Jointing cutter unit 08.376 (2 x 3 kW) Gluing unit (hot-melt adhesive) 283.1513 Edge pressure zone Edge magazine for rolls (no. of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (2 x 0.66 kW) Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Diese IMA Novimat Systems I/R75/1000 Kantenanleimmaschine wurde 2005 hergestellt. Sie verfügt über ein robustes ICOS OPEN Steuerungssystem, eine Fügefrässtation mit leistungsstarken Motoren sowie eine vielseitige Multifunktionsbearbeitungseinheit für präzise Kantenbearbeitung. Die Maschine ist mit einem 32-fach Kantenmagazin und einer fortschrittlichen Leimeinheit mit automatischem PU-Schmelzsystem ausgestattet. Nutzen Sie die Gelegenheit zum Kauf dieser IMA Novimat Systems I/R75/1000 Kantenanleimmaschine. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Kfjdpfx Aaox D Ri Uohsa Anwendungsbereiche: Kantenanleimen

Kondisi: seperti baru (mesin pameran), LEFT-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 - in strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser - max 44) Control ICOS Open Feed speed m/min (adjustable) 16 - 30 Pressure beam driven by V-belt Spraying unit (for liquid release agent) Adjustable fence, CNC-controlled Panel infeed system 700.101 (mm 500 x 500) Jointing unit with CNC-controlled 08.379 (kW 4.0 x 2) edge pressure zone (CNC-controlled) Gluing section (P.U.R. glue + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Kodegbug Njpfx Aahjfa Gluing unit (premelter with laser) Laser system IMALUX Spraying unit (for separating liquid) Pressure zone + edge magazine for rolls (compartment No.) 6 Linear end trimming unit 08.428 LKA V30/2 (kW 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC-controlled) 08.0587 (kW 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC-controlled KFA 20 (kW 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-4 (kW 0.18 x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (kW 4.5 x 2) 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control unit: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area (X - Y - Z) for edgebanding (mm): 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - mm 1200 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity: 140 m3/h) Safety enclosure for the working head, safety foot mats Chip conveyor belt No. 2 vertical main spindles (milling units) HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (carousel changer) with 18 tool stations No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Ksdefbmqtspfx Aahsfa Edgebanding unit - edgebander (hot melt glue) VT 50 Edge magazine for rolls (compartment no. 6) OPTIONALS: No. 1 adapter unit for saw, fixed at 90 degrees, max. diameter 200 mm No. 1 adapter unit for flush trimming and profile scraping No. 1 adapter unit, horizontal drilling and milling head (cross head), 4 horizontal spindles

Kondisi: sangat baik (bekas), Single-sided edge banding machine (LEFT) Edge thickness, rolls (min/max) mm: 0.3 - 3 Edge thickness, solid strips (min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: V-belt driven Spraying unit (for liquid anti-adhesive) Kjdpfx Asd Nuu Hoahefa Jointing milling unit 08.376 (2 x 3 kW) Gluing station (hot melt adhesive) 283.1513 Edge pressure zone Edging magazine for rolls (number of compartments): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and profile milling) 08.342 (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Kondisi: sangat baik (bekas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper crossbeam No. 1 horizontal upper crossbeam (on which the carriage glides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for stack discharge from the unloader No. 1 external motorized roller conveyor at the stacking area Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Kjdpswbp Nwsfx Aahefa Total connected load (kW): 80

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Kfedpfxjvxhnuj Aahsa Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Kondisi: sangat baik (bekas), Single-sided edge banding machine (left) Roll material (edges) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips / laths (min/max) mm: 1 Panel thickness (min/max) mm: 8 - 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Pressure beam: V-belt driven Spraying unit (for liquid release agent) Adjustable fence (CNC controlled) Jointing unit with CNC control 08.378 (2 x 4.5 kW) Workpiece edge heating lamps Gluing unit (hot melt glue + pre-melter) 04.1570 Spraying unit (for separating fluid) Edge pressure zone Edge magazine for rolls (compartment number): 16 End trimming unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile milling unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying unit (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Form copy milling unit 08.604 (4 x 0.25 kW) brush Multi-profile scraper unit (CNC controlled) 08.516 Flat scraper unit 08.521 Kjdem Udfwepfx Aahofa Spraying unit (for polishing fluid) Buffing unit 08.617 - 4 (4 x 0.18 kW) Smoothing unit 08.53

Kondisi: sangat baik (bekas), COMPLETE 4-SIDED SIZING AND EDGE BANDING LINE The line consists of the following machines: Kfsdpeun N Dlsfx Aahsa A) W06027 1st Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /440 /A /R3 B) Rotation Station (90°) C) W06028 2nd Double-Sided Sizing and Edge Banding Machine "IMA" Combima II /190 /B /R3

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 20 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Compact Feed speed m/min (adjustable) 6 - 30 Top pressure: V-belt driven Kjdpjidqphefx Aahofa Adjustable fence, CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps to heat the sides of the workpieces Gluing station (hot melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.) 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding liquid) Contour trimming unit (for fine trimming), CNC-controlled 08.348 (KW 0.66 x 2), 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving/rabbetting and profiling 08.183 (Kw 3 x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGEBANDING MACHINE (LEFT-HAND SIDE) Kfsdpfjr Ttflsx Aahea Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edges possible with limitations up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorised timing belt Spray unit (for liquid anti-adhesive) Adjustable fence Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (number of compartments): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and contour trimming) 08.342 CNC-controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal routing unit for grooving/rabbetting and profiling 08.190 (1 x 4.5 kW)

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Set-up table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool changer with 18 tool positions Maximum working area (X - Y - Z): 6300 x 1450 x 100 mm Minimum workpiece size (X-Y-Z): 320 x 115 x 14 mm Maximum workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and panel. Total connected load: 34 kW WORKING UNITS (UPPER): No. 1 vertical main spindle (milling unit) HSK F63 - drive power 18 kW (S6) Kfedjtixpujpfx Aahsa Saw, fixed at 90°, diameter 200 mm Edge banding unit (installed on the machine) VT 100 No. 2-position roll magazine Combination unit (flush trimming/profiling knife) Feed system with brush table No. 6 clamps for securing and moving panels on the machine’s suction cups Workpiece outfeed with motorized rollers and 90° angle transfer system

Kondisi: sangat baik (bekas), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTRE (POINT-TO-POINT) CNC machining centre for milling, drilling, cutting, and edge-banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel 650 mm) Maximum working area for edge-banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) - 1400 mm LED setup aid for positioning of vacuum suction cups (Y-axis) No. 2 vacuum pumps (capacity: 140 m³/h) Safety housing for the machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivelling 90° in X-Y direction), diameter 200 mm Edge-banding unit (PUR glue + premelter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE-BANDING UNIT No. 2 edge magazines for roll material OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and contour scraping Kfedpfxew A Ruqo Aahsa

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Kfjdpfxji Hn Srj Aahoa Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: sangat baik (bekas), EN: FLEXIBLE BATCH SIZE-1 PRODUCTION AND SINGLE-SIDED EDGEBANDING AND FORMATTING LINE Consisting of the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (RIGHT) FORMATTING AND EDGEBANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Roll material (edges) thickness (min/max) mm 0.3 / 3 Control / Software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 Jointing cutters with CNC-controlled 08.378 (4 motors x kW 4.5) Glue application unit (hot melt glue + pre-melter) VTG + 283.205 Edge magazine for rolls (No. 24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x kW 0.2) 0°-25° Pre-milling unit 08.055.0.1680 (1 x kW 0.85) Multiple profile milling unit (CNC-controlled) 08.0587 HS/LS1 (2 x kW 1) Contour milling unit (for fine trimming) CNC-controlled KFA x20 (1 x kW 0.5) 20 m/min Multiple profile scraper unit (CNC-controlled) 08.516 HS/LS1 Kfsdpfx Aajkt Uuaehsa Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x kW 0.18) No. 3 Universal milling units for grooving/rabbetting and profiling 08.190 (3 x kW 4.5) CNC-controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO" FR: LIGNE FLEXIBLE DE PRODUCTION PAR LOT-1 ET D'ENCOLLAGE/USINAGE DE CHANTS UNILATÉRALE Composée des machines suivantes : M.01) TABLE D'ALIMENTATION ET SYSTÈME AUTOMATIQUE DE RETOUR DES PIÈCES "SIRIO" BATCH SIZE ONE M.02) ENCOLLEUSE/USINEUSE DE CHANT UNILATÉRALE (droite) "IMA" Novimat I/R75/690/R3 Épaisseur panneau (min/max) mm 8 / 60 — Largeur de travail (min/max) mm 200 / 1300 Matériel rouleau (chants) épaisseur (min/max) mm 0,3 / 3 Commande / logiciel : ICOS Open (Batch Size One) Vitesse d'avance (réglable) m/min 6 – 30 Système d'introduction automatique de panneaux en mode format A1 / 15 N° 2 agrégats d'affleurage avec CN 08.378 (4 moteurs x kW 4,5) Unité d'encollage (colle hot-melt + prémélangeur) VTG + 283.205 Magasin pour chants en rouleau (N° 24 positions) Unité de coupe-anglet terminale 08.42 / 30 / B / LS1 (2 x kW 0,2) 0°-25° Unité de pré-fraisage 08.055.0.1680 (1 x kW 0,85) Agrégat multifraise profil (CN) 08.0587 HS/LS1 (2 x kW 1) Unité de fraisage de contour (pour finition) CN KFA x20 (1 x kW 0,5) 20 m/min Agrégat racloir multi-profil (CN) 08.516 HS/LS1 Agrégat à racloir plat 08.521 Unité de polissage 08.617-2 (2 x kW 0,18) N° 3 agrégats universels pour rainurage, feuillurage et usinage de profil 08.190 (3 x kW 4,5) CN — 90°/180°/270° M.03) SYSTÈME D'ALIMENTATION ET DE GERBAGE "SIRIO"

Kondisi: sangat baik (bekas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control system: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) in edge banding (mm): 3100 x 1925 x 60 No. 6 clamping table with consoles (number of consoles) – mm 1400 Kedsq Nmutspfx Aahjfa LED setup aid for vacuum cup (sleeve) positioning (Y axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety tread mats No. 1 vertical main spindle (milling units) HSK F63 (18 kW) Automatic tool change system (rotary tool changer) with 18 tool positions No. 14 independent vertical drilling spindles (2 × 1.2 kW) Cross-unit with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – application head (hot melt glue) VT 100 No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 – 3 Panel thickness (min/max) mm 8 – 60 Control ICOS open compact Kfjdpoltmnlofx Aahsa Feed speed m/min (adjustable) 6 – 30 Top pressure: driven by V-belt, spray unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable fence rule CNC-controlled. Panel infeed system Barcode reader Jointing cutter unit with CNC control 08.379 (2 x 4.0 kW) Heater for workpiece edge warming Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge pressure zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (slot no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free space Universal milling unit for grooving/rebating and profiling 08.190 (4.5 kW x 1)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 3 / 12 Kedpfx Aaed Nt N Hohefa Panel thickness (min/max) mm 8 / 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Pressure beam: driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable guide fence, CNC controlled Joint milling unit 08.379 (2 x 4.0 kW) Gluing unit (hot melt adhesive & PUR glue) 283.1513 Edge pressure zone (CNC-controlled) Edge magazine for rolls (compartment No.): 1 End trimming unit 08.415 (2 x 0.66 kW) Pre-milling unit 08.055 (2 x 1.0 kW) Copy shaping unit (profile copy) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile scraper unit 08.519 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) Universal milling unit for grooving, rebating, and profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed table 65.152 (mm 500 x 500) Return conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 8 - 60 Control: ICOS open Feed rate m/min (adjustable): 7-35 Top pressure: V-belt driven, spray unit (for liquid non-stick agent) Adjustable fence: CNC controlled. Panel feeding system A2 / 30 Jointing unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments no.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spray unit (for sliding fluid) Kedpsifnzdsfx Aahefa Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)