Beli Pengeboran bekas (1.014)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, jam operasional: 9.413 h, nomor mesin/kendaraan: 101T2551-1, - Engine power: 179 kW at 2200 rpm Nsdpfx Ajv Nhyfjglskt - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 t - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm Nkodeq Ii Dlopfx Aglot - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: bekas, Tahun pembuatan: 1992, nomor mesin/kendaraan: 293784, Drilling spindles: 8 Drilling spindle rotation direction: 4 right-hand and 4 left-hand Drilling spindle speed: 2800 rpm Shank mount: 10 and 11 mm Drilling stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space requirement: approx. 650 x 400 x 1700 mm Weight: 120 kg Nedpfebnnybex Aglekt

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 5801, de-plate-drilling-fdb600 Nkodeibq Itopfx Aglet

Kondisi: baik (bekas), Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Throat (distance spindle to column): approx. 500/2500 mm Min./max. distance between table surface and quill: 650/2300 mm Quill stroke: 500 mm Table clamping surface: 1250 x 2800 mm Spindle speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Nkodsg A Inwspfx Aglst Spindle drive: 7.5 kW Weight: 12,000 kg Space requirements: 4000 x 1280 x 4100 mm

Kondisi: bekas, Drilling device on base plate with three-jaw chuck and dual height-adjustable and horizontally adjustable mount for a drill machine. Comprising: Nksdpfx Ajc U U Udeglot Three-jaw chuck AROWA, 250 mm diameter, horizontally rotatable by 380° with scale, indexing, and clamping. Base frame for accommodating a drilling machine, guided on two columns and spindle height-adjustable design, featuring a horizontally adjustable mount with scale (travel: 120 mm) on the same plane. Above that, a round column provides primary height adjustment on the column with clamping. Mounted on this is a circular guide with rack-and-pinion and lever feed for the drilling procedure (stroke: 100 mm). Overall space required: 600 x 400 x 850 mm (H) Weight:

Tahun pembuatan: 1970, Kondisi: bekas, nomor mesin/kendaraan: 12901, Drilling capacity steel/cast iron: 50/60 mm Spindle taper: 5 MT Throat depth: 400 mm Table size: 700 x 600 mm Nedpey R Thefx Aglskt Quill stroke: 275 mm Spindle speeds: 32 - 1030 rpm Feeds: 4; 0.1 - 0.4 mm/rev Drive motor: 380 V, 2.2/3.7 kW Required space: 700 x 1200 x 2700 mm Weight: 1240 kg

Kondisi: bekas, nomor mesin/kendaraan: 135, Drilling capacity in steel (diameter): 60 mm Arm reach: 2000 mm Min./max. distance between support surface and quill: 525/1690 mm Quill stroke: 310 mm Spindle taper: MT 5 Table clamping surface: 1900 x 1100 mm Spindle speeds: 30 - 1250 rpm Feeds: 0.08 - 1.35 mm/rev Spindle drive: 5.5 kW Nodpfx Aob S E H Rsglskt Weight: 5700 kg Required space: 2975 x 1100 x 2950 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, CMA mesin bor koordinat otomatis tipe GRD 40 CNC 3030 Nsdjw Tidkspfx Aglskt ukuran meja: 3000x3000 mm kecepatan sumbu X: 18 m/menit kecepatan sumbu Y: 12 m/menit kecepatan sumbu Z: 5 m/menit jarak spindel ke meja: 160-660 mm tinggi meja: 770 mm Kapasitas pengeboran: Baja 60: 40 mm Besi cor: 40 mm kecepatan spindel: 750-3000 rpm Tipe spindel: BT40 daya motor: 7,5 kW berat total mesin: 8.500 kg

Kondisi: bekas, 2-spindlige Vertikalbohrmaschine, geprüft, funktionsfähig. Nkedpfx Aoivur Uoglot

Kondisi: bekas, Bohrmaschine mit 2 Spindeln, vertikal, Marke Camam Nksdpoivutcofx Agljt

Kondisi: bekas, 2-spindelige vertikale Bohrmaschine, die zusammen mit der Maschine für Fundamentbolzen, Code 106194, eingesetzt werden kann. Nksdpfx Agsrq Svleljt

Kondisi: bekas, Zweispindeliger Runddübel-Einsetzer für Tischbeine. Kann in Verbindung mit der Zweispindel-Bohrmaschine, Code 012418, verwendet werden. Nkjdpfx Agjq Rkudjlot

Kondisi: bekas, Double mitre saw and boring machine, with adjustable vertical blades, 2 lower boring heads, 2 upper boring heads Nsdpfxev Tnihs Aglekt

Kondisi: bekas, Bohrmaschine mit mehreren vertikalen Spindeln, verstellbar Nkedpfx Aon U Iqtsgljt

Kondisi: bekas, Bohrmaschine + Buchsenpresse Njdpfxstt E Ste Aglokt

Kondisi: bekas, Doppelschnitt-Gehrungssäge mit Bohraggregaten, gebraucht. Nsdpfx Agsqgtbpoljkt

Kondisi: baru, Tahun pembuatan: 2022, Bavelloni VDM1636 Vertical CNC Drilling and Milling Machine. + Additional options: - Pre-setting of drill bits, wheel dressing, - Barcode reader, - Additional Camnay Office software. The VDM 1636 CN is a vertical CNC drilling and milling machine designed for automatic execution of complex drilling and milling cycles. It is equipped with a dual drilling head (1 + 1 opposing spindles), each featuring a rotary tool magazine (8 positions each). The machine, characterized by user-friendly operation, has been designed using the most advanced technical solutions to ensure exceptionally high working accuracy. The dual rotary 8-position tool magazine enables drilling, countersinking, and milling to be carried out in a single machining station. Easy to use, fast, and precise thanks to advanced features: 5.5 kW spindles, spindle movements guided by ball screws, next-generation NC brushless motors, and intuitive, user-friendly software. Range of operations In a single automatic cycle, the VDM 1636 CN can process the following operations: • Drilling • Conical countersinking • Milling • Cut-outs Holes can be made at any point on the glass surface. The new control console used in the VDM1636 drilling and milling machine combines all the advantages of numerical control. This interface can network with other machines, and can also be connected to the BAVELLONI network, enabling remote manufacturer service. Nsdpfxetui R Dj Aglskt Main features of this system: • Programming while machining: while the program controls the machine movement, the operator can easily work on the computer. • Simple and direct graphical interface. • Data transfer using standard market tools. The VDM 1636 CN is equipped with one of the most advanced (CAD/CAM) software systems specifically designed for glass processing with CNC machining centers, offering exceptional performance, reliability, and ease of use thanks to state-of-the-art technical solutions.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, mesin bor deret ganda GANNER dengan masing-masing 21 spindle Nksdpfxsxlt T Se Aglet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0401-240027, tinggi produk (maks.): 50 mm, tinggi produk (min.): 8 mm, panjang produk (maks.): 6.000 mm, lebar produk (maks.): 600 mm, lebar produk (min.): 80 mm, TECHNICAL DETAILS Maximum workpiece size: 600 x 50 x 6000 mm Minimum workpiece size: 80 x 8 mm Drilling System Number of drilling spindles: 3 units Maximum drilling diameter: 8 - 40 mm Drilling tool: HSS coolant channel drill Cutting System Cutting method: Oxy-fuel Cutting gases: Acetylene and oxygen (conversion to other media possible) Nkodpfx Agjvytiyoljt Material Handling Transport mechanism: roller feed Control and Software Control unit: Fagor 8055i CNC CAD data formats: DSTV, DXF MACHINE DETAILS Total power requirement: 30 kW Machine weight: 6.5 t Machine dimensions (L x W x H): 2,000 x 1,900 x 2,800 mm Additional equipment: Filtration system for cutting fume extraction

Kondisi: bekas, Tahun pembuatan: 1986, nomor mesin/kendaraan: 104, 1-spindle paper drilling machine (1-head), Foellmer, year of manufacture 1986, serial no. 104 4 Online video inspection via Skype available. We would be pleased to welcome you for an inspection—many more machines in stock. Njdpfxsh Aw Une Aglekt Immediate availability – machine can be inspected. Located in Emskirchen/Nuremberg – test run possible.

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 18109, 2-spindle paper drilling machine - Nagel Citoborma 280b, year 1998 Online video inspection via Skype video available. We would be pleased to welcome you for a visit - more machines in stock. Immediately available - Inspections possible. Nodpoh Axrksfx Aglokt Located in stock in Emskirchen / Nuremberg – testable on site.

Kondisi: bekas, Tahun pembuatan: 1984, nomor mesin/kendaraan: 106, 4-spindle paper drilling machine – Josef Foellmer IRAM 200, ca. year 1984 – Serial No. 106 Nkodpfxeh Axads Aglet Drilling diameter: 3 – 10 mm Adjustable drilling distance: 36 – 430 mm Online video inspection possible via Skype We would be pleased to welcome you for an inspection – many more machines in stock Available immediately – Machine can be inspected Located in Emskirchen/Nuremberg – Test possible on site

Kondisi: bekas, nomor mesin/kendaraan: 13164, 1-spindle paper drilling machine - 1-head spindle paper drill Nagel Citiborma 150, Serial-No. 7404 Online video inspection via Skype video We would be delighted to welcome your visit – more machines available in stock Nkedpfxeh Aw Ugs Aglst Available immediately – can be inspected In stock in Emskirchen / Nuremberg – testing possible

Kondisi: bekas, nomor mesin/kendaraan: 71789, 2-spindle paper drilling machine / 2-head spindle paper drill Hang 136D Serial No. 71789 Nkedpfx Agsrmulyeljt Side stop for fine adjustment Depth stop for fine adjustment Maximum stacking height: 50 mm Drill diameter: 2 – 14 mm Online video inspection via Skype video We would be very pleased with your visit – more machines in stock Available immediately – can be inspected In stock in Emskirchen / Nuremberg – can be tested