Beli Pusat Penggilingan bekas (12.767)

Kondisi: bekas, Tahun pembuatan: 2012, Diameter putar 370 mm Panjang pembubutan 424 mm Kontrol MSX-711-IV Mori Seiki Diameter lintasan 370 mm Sumbu X1 380 mm Sumbu X2 155 mm Sumbu Z1 460+155 mm Sumbu Z2 610 mm Sumbu Y +/- 105 mm Sumbu B +/- 120° Diameter batang 65 mm Kecepatan spindle maks. S1 5.000 / S2 6.000 rpm Lubang spindle S1/S2 65/38 mm Kecepatan spindle milling 12.000 rpm Jenis holder Capto C5 Majalah alat: majalah rantai 76 pcs Daya total yang dibutuhkan 45 kW Berat mesin sekitar 10,5 ton Dimensi sekitar 2,71 x 2,43 x 2,40 m Sistem kontrol MAPPS Renishaw HPRA (presetter alat manual) Blum Laser Control Godpsznnc Hofx Adqebu Sistem pengukuran langsung X;Y;Z;B Chuck collet SMW Autoblok KSZ-MB-040-Z140 Konveyor benda kerja Barfeeder Breuning Irco ILS-RBK-10012 Filter sabuk Knoll KF10/500 / pendinginan tekanan tinggi melalui spindle milling hingga 70 bar, 7 tingkat Conveyor chip ConSep 2000

Kondisi: baik (bekas), Tahun pembuatan: 2008, panjang pembubutan: 1.500 mm, diameter pembubutan: 420 mm, manufacturer: MAZAK type: QTN 350 II MY control: Mazatrol Matrix Nexus year of manufacture: 2008 Specifications Metric US Standard Maximum turning diameter: 420 mm X-axis travel: 257 mm Y-axis travel: 152 mm Z-axis travel: 1607 mm Spindle bore: 102 mm Spindle speed: 3,300 rpm Spindle power: 30 kW Gbjdpfjwaikxjx Adqeu Tool turret: 12 stations Driven tool speed: 4,000 rpm Driven tool power: 7.5 kW Tailstock quill taper: 5 Mk Tailstock quill stroke: 200 mm Dimensions (approximate) Length: 5,000 mm Width: 2,100 mm Height: 2,200 mm Weight: 8,600 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. No representations or contractual terms are implied. We recommend verifying all critical details independently.

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Gbjdpfx Adsw E Nnbeqsu Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 2008, Detail Teknis: Diameter putaran standar: 200 Gbsdpfx Adjzd Su Esqsu Panjang putaran: maks. 810 mm Pengontrol: MSX-701 MAPPS III Diameter putaran di atas alas: 800 mm Jarak maks. antar pusat: 1130 mm Diameter putaran maks.: 320 mm Diameter benda kerja maks.: 300 mm Diameter batang: 65 mm Langkah sumbu X 1: 210 Langkah sumbu X 2: 210 mm Langkah sumbu X 3: 210 mm Langkah sumbu Y 1: 110 (+65/-45) mm Langkah sumbu Y 2: 110 (+45/-65) mm Langkah sumbu Z 1: 300 mm Langkah sumbu Z 3: 300 mm Langkah sumbu Z 2: 810 mm Langkah sumbu B: 870 mm Rentang kecepatan putaran - spindel: 5.000 rpm Jumlah rentang kecepatan putaran spindel: 2 Hidung spindel: JIS A2-6 Lubang spindel: 73 mm Diameter bantalan spindel: 120 mm Sumbu C: 0,001 ° Rentang kecepatan putaran - spindel: 5.000 rpm Hidung spindel: JIS A2-6 Lubang spindel: 73 mm Diameter batang maks.: 65/52 mm Diameter bantalan spindel: 120 mm Sumbu C: 0,001 ° Jumlah turret: 3 Jumlah stasiun alat: 16 x 3 = 48 posisi Tinggi batang untuk alat persegi: 20 mm Diameter batang untuk batang bor: 32 mm Waktu pergantian turret (4 stasiun): 0,18 detik Jumlah alat yang digerakkan: 16 x 3 = 48 posisi Kecepatan putaran maks. alat yang digerakkan: 6.000 rpm Kapasitas pemesinan alat putar: M16 / Ø16 Kecepatan cepat sumbu X: 30 m/menit Kecepatan cepat sumbu Y: 20 m/menit Kecepatan cepat sumbu Z: 50 m/menit Daya penggerak - motor spindel: 25 / 22 kW Daya penggerak - alat yang digerakkan: 7,5 / 5,5 kW Total kebutuhan daya: 92,7 kVA Berat mesin kira-kira: 9,4 ton Ruang yang dibutuhkan kira-kira: 4,0 x 2,8 x 2,4 m Aksesori: Konveyor serpihan Sistem pendingin Sumbu C spindel utama dan tandingan Sumbu Y 2 x Penghitung komponen Penghitung total Pengukuran alat Spindel 1, chuck tiga rahang SMW KNCS-N 210 / 52 mm Spindel 2, chuck collet Hainbuch Spanntop nova Kombi Axfix 65 Antarmuka robot Antarmuka pemuat batang NZ2000 T3Y2 memiliki 2 spindel dan 3 turret. 2 turret memiliki fungsi sumbu Y dengan motor frais terintegrasi. Hal ini memungkinkan pemesinan simultan dengan 3 turret. Pemesinan berkinerja tinggi dan berkecepatan tinggi dapat dilakukan dengan menggunakan maks. 48 alat yang digerakkan. Mesin ini telah dirawat oleh departemen pemeliharaan internal dan Mori Seiki.

Kondisi: baik (bekas), Tahun pembuatan: 1997, The HARDINGE CONQUEST T42L, a used 3-axis CNC lathe with live tooling, is a robust and precise medium-sized slant-bed lathe with a turning length of approximately 700 mm, bar capacity of 42 mm, and a 12-position automatic turret with live tools. It features a FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer. Spindle: ASA 5″ Max spindle speed: 4,200 rpm Full C-axis Godpfxevtrc Sj Adqjbu Spindle power: 20 HP X-axis travel: 172 mm Z-axis travel: 575 mm Machine weight: 4,000 kg Complete with 210 mm AUTOBLOCK hydraulic chuck, tool presetter, programmable tailstock, 2 live tool holders (1 axial and 1 radial), chip conveyor, set of fixed and manual tool holders, and backup disk. Year of manufacture: 1997. CE-compliant and in excellent condition. Also available: CONQUEST T51 model.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Penggerak Utama Jumlah sumbu: 5 Pusat turn-mill Mazak INTEGREX I-150 5-sumbu ini diproduksi pada tahun 2012. Pertimbangkan kesempatan untuk membeli pusat turn-mill Mazak INTEGREX I-150 ini. Hubungi kami untuk informasi lebih lanjut. Gbedpfex D I Rpsx Adqou Jenis Aplikasi Bubut

Kondisi: baik (bekas), Tahun pembuatan: 2012, 750 mm diameter ayun, 500 mm diameter pemesinan maksimal, 1300 mm panjang pembubutan maksimal, spindel utama 3000 rpm, kapasitas batang 65 mm, milling hingga 8.000 rpm, 20 kW, Sumbu C 0,001 derajat, Sumbu Y -90/+120 mm, ATC 40 posisi, Gbjdpfx Adoxqyg Njqeu kecepatan milling 4.000 rpm, motor spindle 30 kW, kontrol FANUC 31i, Chuck tenaga 3 rahang, konveyor serbuk, pendingin, tool setter, parts catcher, unit barfeeder.

Kondisi: bekas, de_en-001 Gbedpfewftt Ujx Adqeu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Siemens Sinumerik 840D control system Godewh U D Hjpfx Adqjbu Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-position turrets with driven tools Turret 1 with Y-axis Parts catcher Belt filter system Chip conveyor IRCO Profimat bar loader

Kondisi: baik (bekas), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual infeed Main motor power: 20 kW Voltage: 380 V Gbedpferpnf Rex Adqju Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: approx. 4315 kg machine + 60 kg drawer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, nomor mesin/kendaraan: 351.10.001.16, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 3.000 mm, lebar benda kerja (maks.): 920 mm, tinggi benda kerja (maks.): 50 mm, kedalaman pengeboran: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Gbedpfezcdkwox Adqou Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindle: 8 x 15 mm, 1 x 35 mm Workpiece size X-axis: 280 – 3,000 mm Workpiece size Y-axis: 180 – 920 mm Workpiece size Z-axis: 10 – 50 mm X-axis speed: 25 m/min Y-axis speed: 25 m/min Z-axis speed: 15 m/min Drilling head motor power: 1.5 kW Drilling head speed: 3,600 rpm Circular saw unit speed: 9,000 rpm Milling spindle speed: 24,000 rpm Maximum circular saw blade diameter: 100 mm MACHINE DETAILS Ambient/operating temperature: 15–40 °C Air humidity: max. 90% at 20 °C Operating pressure: 6–8 bar Rated compressed air consumption: 60 Nl/min Air consumption: 1,650 m³/h Compressed air supply diameter: 5/8" Internal diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional roller support tables

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 – WIE NEU, BAUJAHR 2023 CNC-Mehrzweck-Drehmaschine mit oberer und unterer Y-Achse, Standard-Futtergrößen 10 Zoll und 8 Zoll. AUSSTATTUNG: - Drucklufteinheit - Pneumatischer Druckschalter - Spindelüberdrucksystem - Y-Achsen-Verfahrweg: -50/+70 mm (obere Revolver, Y1-Achse) - Y-Achsen-Verfahrweg: -50/+30 mm (untere Revolver, Y2-Achse) - Späneförderer, rechtsseitiger Austrag, Scharnierband (Hersteller: Moretech, Japan) - Luftblas-System – rechte Spindel - Funktion zur Überlast-Erkennung - Werkstück-Phasenpositionierung (C-Achsen-Drehmoment-Sprungfunktion) - Kühlmittelleitungen über der Spindel – linke und rechte Spindel - 3 x Kühlmittelpumpe 400 W - Ölskimmer (Öl-/Wasserabscheider), Ölabscheidebox - Hydraulik-Druckschalter - LED-Maschinenbeleuchtung - Zentralschmierung und Sammelbehälter - Maschinenhandbücher & Bedieneranleitungen - Maschinen-Fundamentplatte für Revolvermontage - Automatisches Abschalten - Transformator: 415V / 3Ph / 50Hz - Standard-Werkzeugpaket - Revolverabdeckungen (je 6 Stück pro Revolver) - Servo-Revolver (unten, Y2-Achse) – 12 Stationen, angetriebene Werkzeuge - Servo-Revolver (oben, Y1-Achse) – 12 Stationen, angetriebene Werkzeuge - 8" 3-Backen-Zylinder-Durchgangsfutter (Kitagawa BR-08), rechte Spindel - 10" 3-Backen-Durchgangsfutter (Kitagawa BR-10), linke Spindel - Direkte Zeichnungsmaß-Eingabe - Funktion: Helikale Interpolation - RAKU-RAKU Monitoringsystem - Stangenvorschub, Hochdruck-Kühlmittelpumpe (Nihon) x 2 - 3-farbige Signalleuchte - Schnittstelle für Mehrfach-Stangenzuführung - Entladevorrichtung mit Teileaustragsband - Manuelle Schnellwerkzeug-Einrichtung für beide Revolver - AI-Kontursteuerung II - Upgrade Späneförderer (Moretech, Japan) - Axial angetriebene Werkzeuge, ER32, 6.000 U/min, 1:1, externe Kühlung (4 Stück) - Radial angetriebene Werkzeuge, ER32, 6.000 U/min, 1:1, externe Kühlung (4 Stück) MASCHINENMERKMALE: - Doppelspindel, Doppelrevolver CNC-Y-Achsen-Drehzentrum - 2 x 12-Stationen-Servo-Revolver mit hoher Präzision - Linke Spindel: 4.200 U/min - Rechte Spindel: 5.000 U/min - Obere & untere Revolver: 6.000 U/min angetriebene Werkzeuge - Obere Revolver Y1-Achse: (-50/+70 mm) - Untere Revolver Y2-Achse: (-50/+30 mm) - 10" + 8" Standard-Futtergrößen BEARBEITUNGSKAPAZITÄTEN - Standard-Drehdurchmesser: Ø 215 mm - Max. Drehdurchmesser: Ø 215 mm - Max. Drehlänge: 800 mm - Stangendurchlass linke Spindel: Ø 82 mm - Stangendurchlass rechte Spindel: Ø 65 mm WEGELÄNGEN - Obere Revolver X1: 230/120 mm - Obere Revolver Y1: 120 (-50/+70 mm) - Obere Revolver Z1: 800 mm - Untere Revolver X2: 210/80 mm - Untere Revolver Y2: 80 (-50/+30 mm) - Untere Revolver Z2: 800 mm - Verfahrweg A (rechte Spindel): 900 mm LINKE SPINDEL - Futtergröße: Ø254 mm (10”) - Spindeldrehzahl: 4.200 U/min - Min. Indexierwinkel (C-Achse): 0,001° - Spindelnase: A2-8 - Spindelbohrung: Ø94 mm RECHTE SPINDEL - Futtergröße: Ø203 mm (8”) Gsdpfjxrnwlox Adqsbu - Spindeldrehzahl: 5.000 U/min - Min. Indexierwinkel (C-Achse): 0,001° - Spindelnase: A2-6 - Spindelbohrung: Ø77 mm - Innenlager-Ø: 120 mm REVOLVER - Anzahl Werkzeugplätze (oben/unten): 12 - Drehmeißelschaft: 25 mm - Bohrstangendurchmesser: 40 mm - Fräseraufnahmedurchmesser: 20 mm - Angetriebene Werkzeugdrehzahl: 6.000 U/min - Je 12 angetriebene Werkzeuge (oben & unten) VERFAHR- UND EILGÄNGE - Schnelleilgänge oberer Revolver X1/Y1/Z1: 20/12/30 m/min - Schnelleilgänge unterer Revolver X2/Y2/Z2: 20/12/30 m/min - Eilgang A-Achse (rechte Spindel): 30 m/min MOTOREN - Spinde

Kondisi: bekas, Tahun pembuatan: 1998, Turning diameter: 850 mm Turning length: 2,000 mm Gedpjyqv Ansfx Adqsbu Swing over support: 690 mm Control: Siemens Model: 840 C Through-spindle coolant: 23 bar Center height: 450 mm Spindle diameter at front bearing: 200 mm Spindle bore: 128 mm Drive power: 60 kW Spindle speed: 7–1,800 rpm Torque: 7,908 Nm Workpiece weight: 4,000 kg Tailstock quill diameter: 160 mm Tailstock quill taper: MK 5 Three-jaw chuck: Forckrath 600 mm Tool changer: 60 positions Power of driven tools: 30 kW Driven tool speed: 56–3,000 rpm Machine weight: approx. 18 t Space required: approx. 6.3 × 2.4 × 3.3 m Machine has been fully overhauled Milling spindle interface: Capto C6 Turning tool holder: double prism Machine comes with extensive optional accessories available The above technical data are provided by the manufacturer and/or operator and are therefore non-binding for us. Prior sale reserved; only our terms and conditions of sale apply. About us - Over 400 of our own machines in stock - Over 15,000 m² storage area, crane capacity up to 70 t - More than 10,000 accessory items for your workshop If you wish to sell machines, production lines or your business, please contact us. Further offers can be found on our website. Viewing by appointment possible. We look forward to your visit. Your Markus Hirsch Team

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. Godetmqi Dopfx Adqsbu The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: bekas, Tahun pembuatan: 2003, en1 Gedpfx Aeyv Dnkodqebu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Gbjdswv Hnmspfx Adqsu Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: bekas, Tahun pembuatan: 2008, drehdurchmesser-127-mm-drehlaenge-50-mm-steuerung-traub-system-t x-8i-drehzahl-12000-u-min-c-achse-0001-abgreifstation-127-mm-dreh zahlen-12000-u-min-eilgang-15-m-min-revolverkopf-x-fach-6-werkzeu gsystem-53-werkzeugsystem-3-werkzeugsysteme-ges Gbsdpfx Adjygm R Ioqju

Kondisi: baik (bekas), Tahun pembuatan: 2006, Maschine wurde ausschließlich für Kunststoff verwendet. Technische Details sind im beigefügten PDF-Dokument ersichtlich. Die von Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Godsu Ibihspfx Adqjbu

Kondisi: bekas, Tahun pembuatan: 1999, Detail Teknis: Diameter putaran: 200 mm Panjang putaran: 600 mm Rentang kerja sumbu X: 190 mm Rentang kerja sumbu Z: 555 mm Gbsdpjz A Andsfx Adqou Unit spindel ganda: Jarak antar spindel: 800 mm Motor spindel: Kiri (40/100%ED): 18/14 kW Kecepatan putaran spindel: 31-6300 RPM Motor spindel: Kanan (40/100%ED): 18/14 kW Kecepatan putaran spindel: 31-6300 RPM Kecepatan putaran alat: 2x12 alat: 7/5 KW, 40-4200 RPM Luas yang dibutuhkan: sekitar 5,032 x 3,048 x 2,445 m Berat mesin: sekitar 6500 Kg Mesin Bubut Gildemeister MF Twin 42-II dengan Sistem Pemuatan Otomatis Mesin ini cocok sebagai mesin dengan spindel ganda untuk pemesinan 4 sumbu pada spindel utama dan spindel tambahan, pemesinan lengkap (bubut, bor, frais, sumbu Y, sumbu B) untuk komponen batang dan poros.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, en Gbedpfx Adoy Spuueqju

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 30.000 h, CNC turning machine Hardinge Quest 6/42 SP Gsdpfx Adexflprsqsbu Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 CNC Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current consumption: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Collet capacity: 42 mm Chuck diameter: 150 mm Maximum workpiece length (with collet): 381 mm Maximum workpiece length (with chuck): 270 mm Maximum turning diameter: 309 mm X-axis travel: 189 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Tool turret: 12 stations VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF SUPPLY Includes (not limited to): CNC Turning Machine Hardinge Quest 6/42 SP Toolholder set Chip conveyor Transformer Chip tray Renishaw probe Exact scope of supply as per photo documentation The CNC turning machine Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control from 2007 is a high-precision machine for versatile turning applications. It features a rigid A2-5 spindle mount, a collet capacity of 42 mm, and a 150 mm chuck, allowing for flexible machining of various workpiece sizes. With a maximum turning diameter of 309 mm, larger components can also be machined reliably. The axes offer generous travel ranges of 189 mm (X) and 406 mm (Z) as well as fast rapid traverse rates for maximum productivity. The 12-position VDI 30 tool turret, with an ultra-short indexing time of 0.1 seconds, ensures quick tool changes and minimizes downtime. Thanks to its robust construction and proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for batch production with the highest accuracy requirements. No guarantee is given for the accuracy, completeness or timeliness of the information.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, 8 bar coolant pump, gear hobbing option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff – The Okuma Specialist and NeffBuy We are also pleased to offer you our comprehensive all-inclusive package: inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, installation and commissioning of the machine, as well as operator training and subsequent after-sales service. Bjsvkhv0lno We provide Okuma CNC service throughout Europe, both electronically and mechanically. Additionally, we have a 1,200 m² inventory of all Okuma spare parts. Please feel free to visit our website for more information. Gbedpfsvta Rkox Adqou

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, TECHNISCHE DATEN Komponenten ADVANTAGE C Querbeschicker: automatisch DREHVORRICHTUNG (Flipper): vorhanden BIESSE FTT: mit 4 Aggregaten, Bohren und Fräsen, automatischer Werkzeugwechsler BIESSE FHT: 2 BEARBEITUNGSAGGREGATE, horizontales Bohren und Dübeleinsetzen WANDRES: Bürsten-Reinigung von oben ADVANTAGE SC Queraustrag: automatisch Plattenmaße Plattenlänge: 240 - 3.200 mm Einzelplattenbreite: 140 - 1.550 mm Plattenbreite: 140 - 800 mm Plattendicke: 12 - 60 mm Bohraggregate Bohrköpfe FTT 800: 2 Bearbeitungszentren mit 4 Bohraggregaten - 5 Arbeitstische Vertikale Spindeln (X-Richtung): 14 unabhängige pro Kopf Vertikale Spindeln (Y-Richtung): 18 unabhängige pro Kopf Horizontale Spindeln (X-Richtung): 3 unabhängige, mit Doppelausgang Horizontale Spindeln (Y-Richtung): 3 unabhängige, mit Doppelausgang Werkzeugwechselsystem Revolvermagazine: 2 Positionen pro Kassette: 56 Einsatzbereich: Automatischer Werkzeugwechsel der Vertikalspindelzentren an 4 Bohraggregaten der beiden Bearbeitungszentren A und B. Frässpindeln Elektrospindel 1: 3,7 kW (5 PS), ISO 30, mit Frequenzumrichter und 3-fach Werkzeugwechselmagazin Elektrospindel 2: 3,7 kW (5 PS), ISO 30, mit Frequenzumrichter und 3-fach Werkzeugwechselmagazin Seitliche Positioniereinheiten Arbeitsplätze: 2 zur parallelen Bearbeitung identischer oder spiegelverkehrter Platten Linkes Positionierelement: fest als seitliche Referenz Rechtes Positionierelement: in X-Richtung verfahrbar, auf unteren Führungen, linear gelagert Verstellung: automatisch je nach X-Maß der Platte Antrieb: Brushless-Motor mit digitaler Steuerung Funktion: Erkennung der tatsächlichen X-Länge im Bearbeitungszentrum, automatische Korrektur der Bohrpositionen Max. Verfahrgeschwindigkeit: 120 m/min Be- und Entladung Einzugssystem: 1 Gurtförderer mit Quertransport, Einzelantrieb Ausschleusesystem: 1 Gurtförderer mit Quertransport, Einzelantrieb Zusätzlich: Reinigungsgebläse im Auslaufbereich Bohrköpfe FHT (horizontal): Bearbeitungszentren mit 2 Arbeitseinheiten (1 LH-Einheit / 1 RH-Einheit) - 3 Arbeitstische HORIZONTALE BOHREINHEITEN mit 24 unabhängigen Spindeln zur Montage an 2 Arbeitseinheiten HORIZONTALE EINSETZEINHEITEN MIT 5+5 LEIMINJEKTOREN UND 8-mm-DÜBELEINSETZERN WERKZEUGTRÄGER-ADAPTER für den Schnellwechsel der Bohraggregate LEIMINJEKTIONS- UND DÜBELEINSETZEINHEIT für Dübel mit 8 mm Durchmesser, zur Ergänzung der Standardausstattung. Die Einheit ist für die Aufnahme von Dübeln mit 8 mm Durchmesser und 25-35 mm Länge vorbereitet. Die 8-mm-Dübeleinsetzeinheit wird benötigt. HINWEIS: Die Dübel-Einsetzeinheit wurde nie verwendet und nicht getestet. Ein Funktionstest ist nicht möglich. Gedpfx Adsy Ui Rnoqjbu ADVANTAGE C 3200 TRASV. 1 POS - Beladung ADVANTAGE SC 3200 TRASV. 1 POS - Entladung Sicherheitsmerkmale Normen: CE-konform Sicherheitsausstattung: Umfangreiche Schutzverkleidungen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Ayunan di atas dudukan melintang 360mm, Diameter pemotongan maksimum 366mm, Gsdpex Eituefx Adqebu Panjang pemotongan maksimum 705mm, Kapasitas batang 80mm, Kecepatan spindle 4.000 rpm, Kecepatan milling 10.000 rpm, Daya spindle utama 18,5 kW, Sumbu C 0,001 derajat, Sumbu Y -/+ 50mm, Turret 12 posisi. Mori Control M730BM, dilengkapi dengan Toolsetter, konveyor serbuk, chuck rahang 3, penangkap benda kerja, unit barfeed.

Kondisi: bekas, Tahun pembuatan: 2015, Turning diameter: 250 mm Turning length: 600 mm Control: FANUC Series 31i-Model A Total power requirement: 23 kW Machine weight: approx. 7.7 t Space requirement: approx. 2,880 x 2,130 x 1,990 mm CNC turning and milling center SPINNER TTS 65 Triplex Year of manufacture: 2015 Control: FANUC Series 31i-Model A MACHINE DETAILS Turning diameter: 250 mm Turning length: 600 mm Travel path - X: 180 mm Travel path - Y: +/-45 mm Working area Z1, Z3 / Z2: 704 / 620 mm Rapid traverse: 30 m/min ----- Main spindle ----- Spindle speed: 0 - 5,000 rpm Bar capacity: 65 mm Spindle power: 18 / 23 kW Torque: 151 Nm Spindle nose: DIN / A6 ----- Counter spindle ----- Spindle speed: 0 - 7,000 rpm Bar capacity: 42 mm Spindle power: 16.5 / 22 kW Torque: 128 Nm Spindle nose: Flat flange 110 mm Gbjdpey Ralnsfx Adqsu ----- Upper turret 1 ----- Position: Top left in working area Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X1 / Y1 / Z1 ----- Upper turret 2 ----- Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X2 / Z2 ----- Lower turret 3 ----- Number of tool stations: 12, all driven Tool holder: BMT 45 Independent axes: X3 / Y3 / Z3 ----- Tool spindle speed: 8,000 rpm Power: 4.3 kW Torque: 13.6 Nm Number of tool holders: 36 Axes: C1, C2, X1, X2, X3, Y1, Y3, Z1, Z2, Z3 ----- Bar feeder: X-Files-S, simple surface loading, 300 mm (3 meters), Ø 10 - 65 mm Bar length: 3.2 m Bar feeder year: 2022 Weight: 2,200 kg ----- Chip conveyor: TD/TTS with 15 bar, 13 bar = 10 l/min, with settling filter Coolant tank capacity: 200 l ----- CNC turning and milling center | SPINNER - TTS 65 Triplex equipped with main and counter spindle, both including C-axis, 3 Triplex turrets for driven tools, and a bar feeder [Top Automazioni X-Files-S Series 3000 Version SX]. The machine has only 3,500 hours of machining time. The machine is in good condition and can be inspected under power. With many accessories/tools.