Kondisi: baru, Tahun pembuatan: 2025, Flow packer with box motion system for extra-wide and tall products. Film feed from above. Servo-driven infeed, longitudinal and end sealing, PLC controlled, operation via touchscreen. "No product – no bag" function. - Specifications: maximum machine cycle rate (idle): 40 cycles/minute; bag dimensions (not product dimensions): L(80-unlimited)xW(50-320)xH(3-140)mm, with W+H max. 320mm; suitable film width max.: 680mm; suitable film thickness: 30-75µm; number of knives: 1 unit; end sealing: oscillating (reciprocating); number of servo motors: 3 (infeed, longitudinal sealing, and end sealing); machine frame (standard version): painted steel; product-contacting parts: stainless steel 304; power supply: 220V, single-phase, 50Hz; rated power: 5.7kW; machine dimensions (LxWxH): 5000×1200×1650mm; weight: 920kg. Please note that our new machine prices are often lower than the usual prices for used machines. Feel free to inquire and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For machines built to customer specifications, we offer very short delivery times starting at around 3 weeks. - All machines are available with full warranty. Knsdpfxov Nlgvs Af Usc

Kondisi: baru, Tahun pembuatan: 2025, Flow pack machine with bottom film feed. Intermittent operation for extra-wide and tall products. Servo motor-driven infeed, longitudinal and end sealing; PLC-controlled, operated via touchscreen. "No product – no bag" function. - Specifications: max. machine cycle rate (no load): 15 cycles/min; bag dimensions (not product dimensions): L(60-unlimited)xW(300-600)xH(10-200)mm, where W+H max. 600mm; suitable film width max.: 1200mm; suitable film thickness: 30-75μm; number of knives: 1 piece; end sealing: intermittent (up/down motion); number of servo motors: 3 (infeed, longitudinal, and end sealing); machine frame (standard version): stainless steel 304; product-contacting parts: stainless steel 304, food-grade belt conveyor; power supply: 220V, single-phase, 50Hz; rated power: 6kW; machine dimensions (LxWxH): 4200x1800x1450mm; weight: 1300kg. Please note that our new machine prices frequently undercut typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We usually have 30-50 different new machines in stock for immediate delivery. For custom-built solutions, we offer very short lead times from approx. 3 weeks. – All machines are available with full warranty. Knsdpov Nlhaofx Af Ujc

Kondisi: baru, Tahun pembuatan: 2025, Automatic packaging machine for packing flat tea bags such as single-chamber and double-chamber bags into 3-side sealed pouches. Discharge unit for grouped pouches. PLC-controlled, operated via touch screen monitor. - Specifications: max. machine cycle rate (idle): 120 cycles per minute; suitable tea bag volume: max. 10 cm³; 3-side seal pouch dimensions (LxW): 70x80mm; 3-side seal pouch material: heat-sealable mono-film or laminated composite film; power supply: 220V; machine dimensions (LxWxH): 1680x1285x1230mm; weight: 500kg. Ksdpfx Afov Nlhms Uonc Please note that our new machine prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – Usually, 30-50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times starting from approx. 3 weeks. – All machines come with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Automatic packaging machine for packing pyramid tea bags as well as flat tea bags such as single-chamber and double-chamber bags into 3-side sealed envelopes. Stacked and counted bag output. Output grouping for up to 5 bags possible; PLC controlled, operation via touch monitor. - Specifications: max. machine cycle rate in idle: 50 cycles per minute; 3-side sealed envelope dimensions LxW: 95x90mm (standard), optional: 85x80 / 105x100mm; 3-side sealed envelope material: heat-sealable composite film (BOPP20/VM-PET12 / PE40, Paper / P.E, OPP20 / Pearl35); suitable film thickness: 55~90µm; power supply: 220V; power consumption: 2.1kW; required compressed air: 0.6 MPa; compressed air consumption: 200l/min; machine dimensions LxWxH: 2700x1450x1300mm. Kjdpfxjv Nlhto Af Uonc Please note that our new prices are frequently below typical prices for used machines. Feel free to contact us and let us know your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. For customer-specific machines we offer very short delivery times of approx. 3 weeks. - All machines come with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, High-speed flow wrapper for packaging smaller products in longitudinally sealed pillow bags. The flow pack packaging machine is suitable for wrapping single or multiple dry, uniform or non-uniform products. A special infeed system is installed upstream of the flow wrapper. Sorting and feeding of the products in line to the carriers (infeed table of the flow wrapper) is performed by six servo-driven side belts. This eliminates the need for manual loading of individual products, providing a significant production advantage and greatly improving the flow wrapper’s cost-effectiveness. AMTEC’s flow pack machine features rotary cutting knives perfectly matched in diameter to the bag length, resulting in optimized speed and performance. – Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (90-220) x W (15-60) x H (5-30) mm; Number of rotary knives: 2 pcs; Max. machine cycles in idle: 400 cycles/minute; Film types: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500kg. Knsdpfx Afov Nli Rj Usc Please note that our new prices are often below the typical used-equipment prices. Feel free to contact us and let us know your packaging requirements. – Generally, we have 30-50 different new machines immediately available from stock. For custom-built machines, we also offer very short lead times starting from around 3 weeks. – All machines come with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, High-speed flow wrapper for packaging smaller products in longitudinal seam pillow bags. The flowpack packaging machine is suitable for packing single or multiple, dry, uniform or non-uniform products. A special feeding system is installed upstream of the flow wrapper. Sorting and feeding the products in line to the transport lugs (flow wrapper infeed table) is handled by six servo-driven side conveyor belts. This means products do not need to be loaded individually by hand, which offers a significant production advantage and contributes considerably to the economic efficiency of the flow wrapper. AMTEC's flowpack packaging machine features rotary knives optimally matched to the pouch length, with diameter and speed optimized for best results. – Specifications: Suitable product dimensions: L (depending on pouch length) x W (15-60) x H (5-30) mm; Pouch dimensions: L (70-150) x W (15-60) x H (5-30) mm; Number of rotating knives: 3 pcs; Max. machine speed (no load): 600 cycles/min; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3,500kg. Please note that our new machine prices are often lower than typical used equipment prices. Feel free to inquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty. Knedpfov Nlkbsx Af Usc

Kondisi: baru, Tahun pembuatan: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat pouches. Modules for specific pouch features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Pouch detectors verify correct placement and full opening of the doypack pouch. As soon as the pouch is detected, the product is filled into the pouch via the filling spout. The sealing area remains clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. – Specifications: Stainless steel housing (SS304); max. machine cycle rate: 10 cycles/min (no load); pouch width: 250–450mm; pouch length: 250–500mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, single phase; machine dimensions: L1150xW950xH1570mm. Kodjv Nllrspfx Af Ujnc Please note that our new prices are often below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We generally have 30–50 different new machines available immediately from stock. For custom-built machines, we offer extremely short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block-bottom bags or flat pouches, available in duplex version for higher output rates. Modules for specific pouch features such as zip/press closure, screw cap (spout), or gusset forming can be integrated. Optional: batch/date coder, gas flushing module. Bag detectors check for correct positioning and complete opening of the doypack. As soon as the bag is detected, the product is dispensed into the pouch via the filling spout. The sealing area is kept clean throughout the process. A special gripping system holds the stand-up pouch precisely in place during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: Stainless steel housing (SS304); maximum idle machine cycle rate: 25 cycles/minute; pouch width: 100-300mm; pouch length: 100-350mm; compressed air requirement: 6.5bar, 0.4 m³/min; power supply: 220V, single phase, 2kW. Knedpfx Ajv Nllxjf Uoc Please note that our new prices are frequently below typical used equipment prices. Feel free to contact us with your packaging requirements. - We usually have 30-50 different new machines immediately available from stock. For custom-built units, very short lead times from approx. 3 weeks are possible. - All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Filling and capping machine for dosing liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary machine is specifically designed for filling all types of liquids such as water, juices, sauces like soy sauce, salad dressings, tomato sauce, or higher viscosity products like barbecue/BBQ sauces, honey, extending to viscous products such as peanut butter, fruit jams, nut nougat cream, and more. The filling and capping machine is equipped with six filling heads for dosing liquids, as well as six heads each for positioning and capping the spout lids. The production process is fully automated, from pouch feeding, filling, nozzle cleaning, supplying the caps via an elevating feeder, capping, to discharging the finished products. A continuous liquid level control ensures accurate filling volumes. PLC control, touchscreen operator panel (menu available in various languages, for example, English, German, etc.). Suitable for pre-made stand-up pouches with side spout (corner spout) or top-mounted spout. - Specifications: Filling range: 150ml (customisable on request); Number of filling heads: 6; Maximum machine cycle rate in idle: 18 cycles/min (equivalent to max. 108 bags/min); Power supply: 220/380V, 3 phase, 1.2kW; Compressed air: 5-7bar, 0.65m³; Product contact parts made from stainless steel AISI 316, non-contact parts made from stainless steel AISI 304; Machine dimensions (LxWxH): 1800x1150x1950mm; Weight: 1000kg. Knjdpfev Nlm Njx Af Uec Please note that our new prices are often below typical used machine prices. Feel free to contact us and inform us about your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary machine is specifically designed for filling all types of liquids such as water, juices, sauces like soy sauce, salad dressings, tomato sauce, or higher viscosity liquids like BBQ sauces, honey, as well as viscous products such as peanut butter, fruit jam, chocolate-nut spreads, and more. The filling and capping machine is equipped with six filling heads for liquid filling and six heads each for positioning and capping the spout closures. The production process is fully automated—from pouch feeding, filling, cleaning of the spouts, supplying the caps via a supply elevator, cap screwing, up to the discharge of the finished products. Precise filling volume is ensured by continuous liquid level monitoring. PLC control, touchscreen operation panel (menu available in various languages, e.g., English, German, etc.). CIP system and UV sterilization lamp included. Suitable for pre-made stand-up pouches with corner spout or top spout. - Specifications: - Spout type: double guide ring - Filling range: 50 - 500ml (adjustable) - Number of filling heads: 6 - Max. machine cycle rate idle: 16 cycles/min (up to 100 bags/min) - Power: 2.5kW, 220/380V, 3-phase - Air pressure and consumption: 6-7 bar, 0.7m³/min - Parts in contact with product: stainless steel 316; non-contact parts: stainless steel 304 - Machine dimensions without pouch feeding conveyor: L2600xW1830xH2050mm - Pouch feeding conveyor dimensions: L2000xW400xH1500mm - Weight: 1700kg Knjdpfxjv Nlnaj Af Uec Please note that our new machine prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. Typically, 30–50 different new machines are immediately available from stock. For customer-specific machine production, we offer very short delivery times starting from just 3 weeks. All machines come with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (Doypacks) with screw caps (spouts). Suitable for pre-made stand-up pouches with a side spout (corner spout) or top spout. The rotary indexing machine is equipped with 3 filling units, each with two filling heads for liquid dispensing, and each with two heads for positioning and closing the spout caps. Additional features include: cap feed lift, external module for CIP cleaning, air cleaning system for the internal area of the machine. Electronic components by Schneider and Omron, PLC and touchscreen by SIEMENS, pneumatic components by AIRTAC. - Specifications: Filling range: max. 3000ml; number of filling heads: 6; maximum machine cycle rate (empty running): 26 cycles/min; power supply: 220/380V / 2.5kW; air pressure and compressed air consumption: 5-7bar, 0.7m³; machine dimensions (LxWxH): 2600x1630x1900mm; weight: 1600kg. Kedpfev Nlngex Af Ujnc Please note that our new machine prices are often below standard used equipment prices. Feel free to contact us and let us know your packaging requirements. Typically, 30-50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. All machines come with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or doypacks without zip closure. Particularly suitable for medium-sized pre-made pouches. Integration of various filling systems possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production cycle. By default, the machine is equipped with one dosing unit and one filling hopper. It is possible to equip the machine with an additional dosing unit and a second filling hopper, enabling either the processing of two different materials or splitting the filling process, thereby increasing production speed (relevant, for example, for viscous products). Main components: PLC, touchscreen control panel (menu available in various languages, such as English, German, etc.), temperature control. – Specifications: pouch sizes (min.-max.): L(80–310)xW(60–180)mm; max. filling capacity: 1200ml; max. machine cycle rate without load: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990 x (W)970 x (H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units shown in the machine photo and/or additional modules (e.g. outfeed conveyor or similar) are optional extras for this item and intended for illustration purposes only. The machine is suitable for a wide range of composite films. We will gladly check and confirm compatibility based on a sample run. The machine/plant is also available in further versions for various packaging sizes and packaging speeds. Knjdpfx Asv Nlntof Uec Please note that our new prices are often lower than typical used equipment prices. Please feel free to inquire and inform us of your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or doypacks with zip closure. Particularly suitable for medium-sized pre-made pouches. Integration of various filling systems is possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production cycle. By default, one dosing unit is included and accordingly one filling hopper is installed. The machine can be equipped with an additional dosing unit and a second filling hopper, enabling either the processing of two different materials or splitting the filling process, thereby increasing production speed (particularly relevant for viscous products). Main components: PLC, touchscreen control panel (menu available in various languages such as English, German, etc.), temperature control. - Specifications: pouch sizes (min.-max.): L (80-310) x W (60-180)mm; max. filling capacity: 1200ml; max. machine cycle rate idle: 50 cycles/min; 1.8kW; 12m³/h; machine dimensions: (L)1990 x (W)970 x (H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). Dosing units and/or other additional modules (e.g., discharge conveyor or similar) depicted in the machine photo are additional options for this item and shown for illustration only. The machine is suitable for a wide variety of composite films. We are happy to check and confirm the corresponding compatibility based on a sample. Kodpfx Afjv Nlnys Usnc The machine/system is also available in further configurations for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used machines. Please feel free to inquire and let us know your packaging requirements. – We typically have 30-50 different new machines available from stock. For custom-manufactured machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontal intermittently operating, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks with a top screw cap. Especially suitable for medium-sized pre-made pouches. Integration of liquid and paste fillers is possible. One pouch is processed per production cycle. As standard, the machine comes with one dosing unit and one filling hopper. Optionally, the machine can be equipped with an additional dosing unit and a second filling hopper, allowing either two different materials to be processed or splitting the filling process, thereby increasing production speed (particularly relevant for viscous products). Main components: PLC, touchscreen operation monitor (menu available in various languages such as English, German, etc.), temperature control. – Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180)mm; max. filling capacity: 1200ml; max. machine cycle rate idle: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All product-contacting parts are made of stainless steel (SS304). Dosing units and/or additional modules (e.g., discharge conveyor or similar) shown in the machine photo are optional extras to this listing and are for demonstration purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on your samples. The machine/system is also available in further versions for various packaging sizes and packaging speeds. Ksdpfjv Nln Hsx Af Ujnc Please note that our new prices are frequently lower than standard used prices. Feel free to ask and let us know your packaging requirements. – We generally have 30-50 different new machines available immediately from stock. For custom-made machines, we offer very short lead times starting from approximately 3 weeks. – All machines are available with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven filling and sealing machine for processing and filling pre-made flat pouches or doypacks without zip closure. Particularly suitable for large pre-made bags. Integration of various filling systems is possible (auger doser, scale, volumetric dosing, liquid, paste, and other dosing units). One bag is processed per production step. By default, one dosing unit and one filling hopper are installed. The machine can be equipped with an additional dosing unit and a second filling hopper, enabling the processing of two different materials or splitting the filling process, thus increasing production speed (especially relevant for viscous products). Main components: PLC, touchscreen operating monitor (menu available in various languages, e.g., English, German, etc.), temperature control. - Specifications: Bag size (min.-max.): L(110-310)xW(90-210)mm; max. filling capacity: 1600ml; max. idle cycle rate: 50 cycles/minute; 4.5kW; 12m³/h; machine dimensions: (L)2700x(W)970x(H)1400mm; weight: 900kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or additional add-on modules (e.g. discharge conveyor or similar) shown in the machine photo are optional extras and are for illustration purposes only. The machine is suitable for a wide variety of composite films. We are happy to check and confirm appropriate compatibility by means of sample testing. The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new prices are often lower than the usual prices for used equipment. Simply send us your inquiry and let us know your packaging requirements. – 30-50 different new machines are usually available from stock at any time. For custom-built machines, we offer very short lead times from around 3 weeks. – All machines are available with a full warranty. Knjdpfx Asv Nln Tef Uoc

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks with zip closure. Particularly suitable for medium-sized pre-made pouches. Integration of various filling systems possible (auger fillers, scales, volumetric dosing units, liquid, paste, and other dosing modules). Two pouches are processed per production cycle, resulting in a higher output per minute. By default, 2 dosing units are provided and therefore 2 feed hoppers are installed. Optionally, the machine can be equipped with two additional dosing units and feed hoppers, allowing either the processing of two different materials or splitting the filling process, which can increase production speed (especially relevant for viscous products). Key components: PLC, touchscreen operating monitor (menu available in various languages, such as English, German, etc.), temperature control. - Specifications: Pouch sizes (min.-max.): L(110-260)xW(90-180)mm; max. fill capacity: 1200ml; max. machine cycle rate (idle): 55 cycles/minute (equals max. 110 pouches/minute); 4.5kW; 30m³/h; machine dimensions: (L)5100x(W)980x(H)1400mm; weight: 2000kg. All product-contact parts are made of stainless steel (SS304). Any dosing units and/or additional modules shown in the machine photo (e.g. discharge conveyor or similar) are optional extras and serve demonstration purposes only. The machine is suitable for a wide variety of composite films; we are happy to check and confirm compatibility based on sample material. The machine/system is also available in further versions for different packaging sizes and packaging speeds. Kjdpfx Afsv Nlque Uonc Please note that our new prices are often below the usual used equipment prices. Simply inquire and let us know your packaging application. - Typically, 30-50 different new machines are available from stock for immediate delivery. Additionally, we offer very short lead times for custom-built machines, starting from approx. 3 weeks. - All machines come with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontal packaging machine for the automatic production, filling, and sealing of doypacks (stand-up pouches) with regular or irregular shapes and a corner spout. Particularly suitable for medium-sized production volumes; integration of liquid or paste fillers is possible. One pouch is processed per production cycle. The machine is supplied with one dosing unit and one filling hopper as standard. Optionally, it can be equipped with a second dosing unit and filling hopper, enabling either the processing of two different materials or splitting of the filling process to increase production speed (especially relevant for viscous products). Main components: PLC, touchscreen operator panel (menu available in multiple languages, e.g., English, German, etc.), temperature control. Specifications: Pouch size (min.-max.): L(180-260)xW(110-180)mm; max. filling capacity: 1200ml; max. machine cycle rate (idle): 50 cycles/minute; 9kW, 15m³/h; machine dimensions: (L)6800x(W)1100x(H)1500mm; weight: 2500kg. All product-contact parts are made of stainless steel (SS304). The dosing units and/or additional attachment modules (e.g. discharge conveyor belt or similar) visible in the machine photo are optional extras and shown for illustration purposes only. The machine is suitable for a wide range of composite films; the films used must have print marks. We are happy to verify and confirm compatibility based on sample materials. The machine/system is also available in additional versions for various pouch sizes and packaging speeds. Please note that our new machine prices are often below typical used machine prices. Feel free to contact us and specify your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times from around 3 weeks. – All machines are supplied with a full warranty. Kodpfx Ajv Nlrrjf Uonc

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches in regular or irregular shapes, optionally with a hanging hole, without zip fastener. Particularly suitable for small pouches. Adjustable for 3-side or 4-side sealing. Integration of various filling systems possible (auger filler, scale, volumetric filler, liquid, paste, and other dosing units). One pouch is processed per production cycle. Main components: PLC, touchscreen operator panel (menus available in multiple languages such as English, German, etc.), temperature control. - Specifications: - Pouch sizes (min.-max.): L(80-220)xW(50-140)mm - Maximum filling capacity: 260ml Knedpfx Afjv Nlugj Uoc - Maximum idle machine speed: 70 cycles/minute - Power: 3.5kW - Air consumption: 6m³/h - Machine dimensions: (L)2850x(W)970x(H)1500mm - Weight: 900kg All product-contact parts are made of stainless steel (SS304). The dosing units and/or additional attachments (e.g., discharge conveyor or similar) shown in the machine photo are optional accessories and for illustration purposes only. The machine is suitable for a variety of composite films. We are happy to check and confirm compatibility based on sampling. The machine/system is also available in additional versions for various pouch sizes and packaging speeds. Please note that our new prices often undercut typical used prices. Simply contact us and let us know your packaging requirements. We usually have 30-50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines are available with full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Horizontally operating, intermittent, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches in regular or irregular shapes, optionally with hanging hole, without zip closure. Adjustable for three-side or four-side seal. Especially suited for small pouches. Integration of various filling systems possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). Each production cycle processes two pouches, enabling a higher output per minute. Two dosing units are required for the production process. Main components include: PLC, touchscreen operating monitor (menu available in various languages such as English, German, etc.), temperature control. - Specifications: Pouch sizes (min.-max.): L(90-180)xW(50-80)mm; max. filling capacity: 100ml; max. machine cycle rate idle: 75 cycles/minute (equivalent to max. 150 pouches/minute); 4.5kW; 13m³/h; machine dimensions: (L)3550x(W)970x(H)1500mm; weight: 1500kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or other additional attachments (e.g., discharge conveyor or similar) shown in the machine photo are extra options for this item and serve for illustration purposes only. The machine is suitable for a wide range of composite films. We are happy to check and confirm compatibility based on samples. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. - Typically, 30-50 different new machines are available immediately from stock. For customized machines, we offer very short delivery times, starting from approx. 3 weeks. - All machines are available with full warranty. Knsdpev Nlvwjfx Af Usc

Tahun pembuatan: 2025, Kondisi: baru, Horizontal, intermittently operating, gear-driven packaging machine for the automatic production, filling, and sealing of flat pouches with regular or irregular shapes, optionally with a euro hole, without zip closure. Configurable for 3-side or 4-side seal. Especially suitable for small pouch sizes. Integration of various filling systems possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). Four pouches are processed per production step, resulting in higher output per minute. Four dosing units are required for the production process. Main components: PLC, touchscreen operator panel (menu available in various languages, e.g., English, German, etc.), temperature control. — Specifications: Pouch sizes (min.-max.): L(70–180)xW(50–90)mm; max. fill capacity: 100ml; max. idle machine cycle rate: 78 cycles/minute (up to 310 pouches/minute); 14kW; 24m³/h; machine dimensions: (L)7050x(W)970x(H)1360mm; weight 3000kg. All product-contact parts are made of stainless steel (SS304). The dosing units and/or other auxiliary attachments (e.g., outfeed conveyor or similar) shown in the machine photo are optional extras and for illustration purposes only. The machine is suitable for a wide range of composite films. We will gladly test and confirm compatibility based on your samples. Knedjv Nlwnspfx Af Ujc The machine/system is also available in other versions for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. Typically, 30–50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. — All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Label shrink tunnel for shrinking labels onto bottles, cans, or jars. Basic version with conveyor belt. Powerful air blowers ensure clean, wrinkle-free shrinking of the labels. Kjdpsv Nlxfofx Af Usnc – Specifications: Max. product size: Ø 110 x H250mm; Tunnel size: L1500 x W120 x H300mm; Max. output: 200 containers/minute; Power: 380V, 14kW; Machine dimensions: L1800 x W600 x H1665mm; Weight: 250kg. Please note that our new prices are often lower than typical prices for used equipment. Feel free to contact us and tell us about your packaging requirements. – We usually have 30–50 different new machines available from stock at any given time. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are available with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Shrink tunnel for applying shrink sleeves to bottles, jars, and containers. Uniform shrinking without creasing is achieved through the steam process. – Tunnel specifications: Max. product size: Ø 100 x H220mm; max. output: 166 containers per minute; power: 220V, 900W; compressed air: 1 bar; machine dimensions: L2450 × W500 × H1600mm; weight: 120kg. – Steam generator specifications: Capacity and steam output: 27l, max. 34.4kg/h; generates shrink temperature: 170°C; compressed air: 7 bar; power: 380V; dimensions: 660 x 420 x 1230mm; weight: 120kg. Please note that our new prices are often below typical used equipment prices. Feel free to send us an inquiry and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machinery, we offer very short lead times starting from around 3 weeks. - All machines are supplied with a full warranty. Kedsv Nlx Sjpfx Af Uonc

Kondisi: baru, Tahun pembuatan: 2025, Economic shrink film packaging machine (2-in-1 / hood shrink machine). Film sealing and shrinking in a single step. Designed for the flexible packaging of small quantities. - Specifications: 220V, 4.0kW; Compressed air not required; max. machine cycle rate (no load): 8 cycles/minute; max. product dimensions (mm) L450 x W300 x H200; max. product weight: Dependent on product dimensions and weight distribution on the infeed table; sealing blade dimensions: longitudinal side = 550mm, transverse side = 400mm; machine dimensions (mm) L1380 x W690 x H1065; weight (net/gross) 125/175kg. For heavy products, we are happy to create sample packages for you, either to confirm that the machine can process your products or, if necessary, to offer alternative equipment for your packaging requirements. For semi-automatic machines, the specified cycle rate should also be considered as an operator-dependent empirical value. Please note that our new prices are often lower than typical prices for used machines. Feel free to inquire and let us know your packaging requirements. Knedpfx Afjv Nly Ns Ujc We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines are supplied with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Economical L-sealer for packaging medium-sized products in shrink film. Semi-automatic model (manual product feed and sealing, automatic discharge). – Specifications: 220V, 1.2kW; no compressed air required; max. idle cycle rate: 20 cycles/minute; max. product dimensions (mm): L450 x W400 x H300; max. product weight: depending on product dimensions and weight distribution on the infeed table; machine dimensions (mm): L1560 x W760 x H1040; weight (net/gross): 125–175kg. For heavy products, we are happy to create sample packages for you to confirm that the machine can process your products or, if necessary, to propose alternative systems tailored to your packaging requirements. Note: With semi-automatic machines, the stated cycle rate is also a typical operator-dependent value based on experience. Knodpov Nlzgofx Af Uoc Please note that our new equipment prices frequently undercut typical used-machine prices. Feel free to submit an inquiry and tell us about your packaging task. – We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we can offer very short delivery times – from approx. 3 weeks. – All machines come with a full warranty.

Kondisi: baru, Tahun pembuatan: 2025, Automatic side sealing machine for shrink packaging. Ideally combined with SHRINKtunnel-POF-L. Suitable for fully automatic inline production, with both automatic or manual feed options. Ksdpfx Asv Nl Efef Usnc - Specifications: max. machine cycle rate (idle): 35 cycles/minute; max. product dimensions: unlimited length, 300mm width, 150mm height; weight (net/gross): 400/500kg; power consumption: 220V, 2kW; compressed air: 5.5 bar/0.1 m³/min; machine dimensions: L1680 x W960 x H1500mm. Please note that our new prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For machines made to customer specifications, we offer very short lead times starting from approx. 3 weeks. - All machines are available with full warranty.