Beli Melihat Pabrik bekas (4.125)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, boxes, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal clearance between knife and counter knife Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Feed material should be max. approx. 500 x 500 mm *Height is less relevant Hydraulically actuated pusher Screen perforation as required (25 - 40 mm) For plastics, coarser screens are recommended (30-40 mm) *For finer shredding, a two-stage size reduction process with downstream MVZ granulator (screens 5-15 mm) is recommended Suction nozzle Ø 160 mm Ledpfxjd H R Sxj Adwjai Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options available (at extra cost): - Shredder raised by approx. 25 cm (preparation for conveyor discharge) + €995 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,490 net - Overbelt magnet + €6,750 net - Control for conveyor belt and overbelt magnet + €2,495 net (start/stop synchronised with shredder) - Alternatively, manual start/stop at conveyor + €497.50 net Material requirements: - Moisture content (a.d.) must be below 25% - Metals and mineral contamination such as sand, stones, etc. will increase wear. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen or send us your material via carrier; we will document the test with photos and videos. --- *Only suitable for brittle plastics of medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this will negatively impact machine lifespan. --- Optional next larger models: Base unit: Shredder MGZ 830 K-S - 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Feed material should be max. approx. 720 x 700 mm *Height is less relevant from €39,995 net *options depending on requirements Base unit: Shredder MGZ 1030 K-S - 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Feed material should be max. approx. 900 x 700 mm *Height is less relevant from €49,975 net *options depending on requirements Base unit: Shredder MGZ 1330 K-S - 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Feed material should be max. approx. 1,200 x 700 mm *Height is less relevant from €79,975 net *options depending on requirements

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, Tahun pembuatan: 2025, • All our products are carefully engineered and covered by a one-year warranty! • Free installation and operational training included. The COMPACT series stationary concrete batching plants offer practical and efficient solutions for all levels of requirements. Stationary concrete batching plants combine maximum capacity with optimal efficiency. The COMPACT series ensures user-friendly operation and top efficiency while maintaining affordable costs. Additionally, this plant precisely utilizes company resources, resulting in time savings that translate directly into increased revenue. TECHNICAL SPECIFICATIONS: Model: COMPACT 110 Production capacity: 100 m³ Mixer type: Twin-shaft mixer – 2 m³ Aggregate hopper: 4 x 20 m³ Cement weighing: 900 kg Additive weighing: 40 kg Water weighing: 700 l Optional cement silo. The COMPACT 110 includes: • Aggregate storage hopper • Aggregate weighing hopper • Aggregate weighing conveyor • Aggregate transfer conveyor • Twin-shaft mixer • Mixer chassis, walkways, ladder • Water weighing hopper • Cement weighing hopper • Additive weighing hopper • Air compressor • Screw conveyor for cement • Bolted cement silo Lodpfx Ajxvw H Rjdwsai • Top filter, safety valve, and accessories • Control room with air conditioning • PC and automation system • Control and power panel FOR MORE INFORMATION, PLEASE DO NOT HESITATE TO CONTACT US!

Kondisi: baik (bekas), Tahun pembuatan: 2025, Maynards is offering the machinery and equipment from the 17-22 inch passenger car and SUV tire production plant of Goodyear in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Equipment and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing stations - Wire production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) Laodpfx Ajxa Dqdodwji - Calendering lines (Comerio, web calenders, winding machines) - Tire curing and finishing - Tire curing presses (HF & Krupp, 77 units) - Grinding and cutting machines (Matteuzzi, Collmann, Röntgen, TR5, TR7) - Cutting and calendering units (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing machines Utility Systems: - Steam boiler plants - Water treatment - Oxygen supply & compressors Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire department) - Material handling and transport (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machines and equipment Notes: All machinery and equipment is offered "as is, where is". All Goodyear-specific data has been removed and software reset to factory settings.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 1.999 h, Pabrik batching beton bergerak beroperasi setiap hari SIMI BSA 60, garansi 6 bulan 4 × 10 m³ tempat agregat Mixer Simi 1 m³ / batch beton, dengan dua poros horizontal Ljdpfexl Ea Djx Adwjai 2 tangki aditif Tanpa silo semen Instalasi dapat dilihat di Drâmbar, Alba Iulia, Rumania.

Kondisi: bekas, Tahun pembuatan: 1997, Satu set perangkat yang digunakan dalam produksi minuman berkarbonasi dengan tambahan sirup, seperti limun. Perangkat terdiri dari: - Tangki berkapasitas 2000 L x 3 unit - Tangki berkapasitas 2000 L dengan pengaduk x 2 unit - Pasteurizer SCHMIDT Sigma MK27 - Tangki dengan pengaduk - Paket instalasi dengan lemari kontrol Model: OST/WEST Q3000l/h Kapasitas: 3000 L/jam Tahun produksi: 1997 Lasdpfx Asubykuodwoi Kondisi: bekas

Kondisi: bekas, Tahun pembuatan: 2007, tischdaten-001 Laodpfjw Rrbtsx Adwsi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Demonstration machine with approx. 10 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at additional cost – see below Lodpfxeb Ny Eyj Adwoai Included: + Profile rotor for increased throughput We are happy to offer you a free test using your material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight; we will document the test with photos and videos. Motor: 18.5 kW; 400 V – 50 Hz – 3 ph Blades: 15 pieces, reversible multiple times, Option for double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10 – 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% Atro. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulic system - Auto shutdown if rotor idles - 70–90 rpm for high throughput - Cyclical control to avoid idling times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant Optional shredder accessories at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood content) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Adjustable angle: 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net Alternatively, fixed magnet block above conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overbelt magnet + €2,750 net (Synchronized start/stop with shredder) Alternatively, manual start/stop + €595 net Requirements for input material: - Moisture content (atro) must be below 30% - Installation temperature: heated room, at least +5°C - Metals and mineral impurities such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, warna: kuning, Tahun pembuatan: 2025, Alle unsere Produkte werden mit Sorgfalt gefertigt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS Lsdexvw Emopfx Adwoai Die stationären Betonmischanlagen der COMPACT-Serie erfüllen alle Anforderungen in verschiedenen Einsatzbereichen durch praktische und effektive Lösungen. Stationäre Betonmischanlagen ermöglichen eine einfache und effiziente Produktion von homogenen Betonmischungen in hoher Kapazität. Die COMPACT-Serie zeichnet sich durch eine einfache Bedienung und die niedrigsten Investitionskosten aus. Darüber hinaus sorgt die Anlage für eine präzise Nutzung der eingesetzten Ressourcen, sodass die Zeitersparnis zu höheren Gewinnen führt. TECHNISCHE DATEN: Modell: COMPACT 180 Produktionskapazität: 180 m3 Mischtrommeltyp: Doppelwellenmischer – 4,5 m3 Aggregatbunker: 5x30 m3 Zementverwiegung: 2.000 kg Zusatzmittel-Verwiegung: 2x50 kg Wasserverwiegung: 1.000 l Zementsilo optional. Der Lieferumfang der COMPACT 180 umfasst: • Aggregat-Vorratsbunker • Aggregat-Verwiegebunker • Förderband oder Kübelsystem für Aggregattransport • Doppelwellenmischer • Mischergestell, Laufstege, Leiter • Wasser-Verwiegebehälter • Zement-Verwiegebehälter • Zusatzmittel-Verwiegebehälter • Luftkompressor • Zementschnecke • Schraubensilo für Zement • Obenfilter, Sicherheitsventil und Zubehör • Schaltschrank • PC- und Automatisierungssystem • Steuer- und Leistungsschalttafel FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS BITTE JEDERZEIT!

Kondisi: baik (bekas), Jaw opening: 150x80 mm 2 rotor blades (95 mm) Ledpfx Aofhnv Isdwjai

Kondisi: bekas, Pabrik pengolahan whey keju kapasitas 15.000 liter/jam Terdiri dari: - Tangki stainless steel 250 liter - Pompa produk 15.000 liter/jam lengkap dengan motor 5,5 kW - Tetra plex C8 SR plate heat exchanger - Unit persiapan air panas SWEP gasketed - Pompa air panas lengkap dengan motor 3,0 kW - Katup otomatis buka/tutup uap - Katup pengatur uap - Steam trap dan filter - Tabung penahan untuk 25 detik pada 15.000 liter/jam di pipa 3 inci - Pipa dan katup termasuk 3 unit katup pengalih aliran 3 port 2 inci - RTD untuk air panas, whey panas & whey dingin - Probe level tinggi untuk tangki keseimbangan Lsdpfxexxi R Ts Adweai - Koneksi ke UF Allen Bradley untuk pengoperasian Spesifikasi lengkap dapat dikirim sesuai permintaan.

Kondisi: bekas, Tahun pembuatan: 2003, Plastic recycling mill Manufacturer: REG-MAC Italy Model: R100/75/V Motor power: 75 kW Laedpfx Aewav Hmsdwji Weight: 1,850 kg Year of manufacture: 2003 Condition: used

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, 214 FREEZER Viessmann BEKAS. Tahun produksi: 2018. DIMENSI EKSTERNAL (dalam cm): - lebar 210, - panjang 300 (+ pintu: 10), - tinggi 215. DIMENSI INTERNAL (dalam cm): - lebar 190, - panjang 280, - tinggi 195. Harga yang tertera adalah harga netto. KAMI BERBICARA bahasa Inggris, Jerman, Prancis, Rusia, dan Ukraina. Lodpjxwcrnofx Adwoai Kami memiliki banyak oven roti di gudang kami: oven rak, oven rotary, oven gas, minyak, listrik, dari berbagai merek. Kami juga menawarkan mesin, peralatan bakery, lini roti, dan lini roti tawar. Untuk melihat penawaran terbaru kami secara lengkap, kunjungi profil Bakeres kami.

Kondisi: baru, Tahun pembuatan: 2024, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €29,975 net (Production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – this regulates the speed of the scraper floor. The bales are placed on the scraper floor, and the milling unit feed is activated. The tines of the milling rotor tear the straw from the bale and throw it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data, Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on the screen size used in the straw mill, kW rating of the straw mill. Without the straw mill, the bale breaker can even process up to 900 kg/h of straw.) Max. square bale size: 2400x1200x800 mm (LxWxH) Milling rotor motor: 5.5 kW, 380 Volt Scraper floor drive: 0.75 kW, 380 Volt Dimensions: 3750x1730x2460 mm (LxWxH) Laodpeb Nulhsfx Adwsi Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; immediately available Special price from €7,995 net Special hopper: + €970 (only in combination with bale breaker) Surcharge for larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric Diameter: 600 mm Hardened cutting blades Screen with interchangeable inserts Optional perforation (10, 12, 15) 22, 30, 45 mm With star-delta switch, phase-failure protection, and 8 m ready-to-connect power cable Blow-out nozzle: 160 mm Blowing distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) Weight: approx. 240 kg --- Optional at extra cost: Feed auger: + €970 net Cyclone (customer to provide suspension) *Should be no more than 10 m away: + €2,970 net Simple filter: €1,750 net --- Additional options: Industrial extraction system (demonstrator): from €9,950 net Optional with rotary valve (makes the material pressureless): + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; lightly used demo unit 70 mm briquette – up to 100 kg/h From €39,700 net * Larger machines available on request --- Description: muetek Bale Breaker was developed for breaking up round and square bales of hay and straw. The shredder mounted to the bale breaker shreds straw from all types of grain, hay, corn, and miscanthus. muetek machines of the MHZ/MHB series are characterized by robust construction and heavy-duty design. muetek bale breakers of the MHB series are equipped with a chain conveyor, onto which the straw bale is loaded using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the milling rotor, feed speed is adjustable. The milling rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is discharged. --- The machines are generally suitable for dry input materials: - Straw - Hay --- The breaking up of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on specification). Shredding hemp with the straw mill is not possible. Requirements for input material: Maximum moisture content 12%

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Alle unsere Produkte werden mit Sorgfalt hergestellt und verfügen über 1 Jahr Garantie! *Installation und Einweisung des Bedienpersonals KOSTENLOS Der FABO MCK-115 ist das größte Modell der MCK-Serie – hierbei handelt es sich um mobile, geschlossene Brech- und Siebanlagen, die zur Aufbereitung von harten Materialien wie Basalt, Granit, Gabbro, Dolomit und anderen Hartgesteinen eingesetzt werden. Der MCK-115 verfügt über zwei Zerkleinerungsstufen: Einen Primär-Backenbrecher und einen Sekundär-Kegelbrecher. Ledpfx Adjxvrc Tewsai TECHNISCHE DATEN: - Bunker: 35 m³ - Anlagenmaße (1. Fahrgestell): 13.000 x 4.700 x 4.400 mm - Zweites Fahrgestell: 19.620 x 4.619 x 4.364 mm - Produktionskapazität: 180–300 Tonnen pro Stunde - 1. Brecher: Backenbrecher – 1.100 x 850 mm - 2. Brecher: Kegelbrecher – FABO CC 300 - Maximale Aufgabegröße: 800 mm - Siebgröße und Decks: 2.200 x 5.000 mm, 3–4 Decks - Gesamtmotorleistung: 450 kW - Generator (optional): 600 kVA DER MCK-115 BESTEHT AUS: • Bunker (Hopper) • Vibrations-Grobstückförderer (Bypass) • Primär-Backenbrecher • Kegelbrecher • Hochfrequenz-Vibrationssieb • Klappbare Aufgabe-, Rückführung-, Bypass- und Haldenbänder • Hydraulikstützen • Fahrgestell mit Achsen und Bereifung • Vollautomatisches Steuersystem • Staubunterdrückungssystem • Wartungsfreundliche Laufstege • Dieselgenerator (optional) FÜR WEITERE INFORMATIONEN RUFEN SIE UNS GERNE AN!!!

Kondisi: baru, Tahun pembuatan: 2025, Condition: new Year of manufacture: 2025 Stock number: 030138 Delivery time: approx. 2 – 4 weeks after order Country of origin: Germany Price: €3,360.75 In stock: 1 Drilling capacity in mild steel: 13 mm Spindle taper: MT 2 Throat depth: 220 mm Speed range: 40 – 4,000 rpm Motor: 0.54 kW (230 V, frequency-controlled) Tapping capacity: M10 (depending on pitch) Length: 520 mm Width: 400 mm Height: 850 mm Weight: 62 kg Quill travel: 60 mm Distance spindle – table: 85 – 370 mm Distance spindle – base: 420 mm Table size: 300 x 250 mm Column diameter: 70 mm Continuous/standard drilling capacity: 13 / 15 mm (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Tapping function Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quick-adjust, ergonomic drilling depth stop Stepless speed adjustment via central rotary knob Emergency stop button Thermal overload protection Spindle stop Laedpfx Asxcbhrodwei Drill guard with electric safety cut-off Power cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drilling package 2 (vice & quick-action drill chuck)

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), For sale: KURTZ VBR-S3 Cutting Line (complete set: KURTZ VBR-S3 cutter, KUKA pick-and-place robot, VIRO PPZA-1300/24/MZG packaging machine, palletizing, wrapping) EPS block cutting line for maximum block dimensions of 5000x1200x1200 mm. Optionally, blocks of 600x1200x2400 mm can also be processed. The complete "U"-shaped line consists of: - Block buffer loading with a tipper - Horizontal cutting with automatic wire positioning, double frame cutting, and oscillation - Waste/excess EPS removal system: top, bottom, sides - Side cutting with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic sorting robot - VIRO packaging machine - Bundle inverting for cross-stacking - Palletizing of EPS sheets in various sizes on wooden pallets or EPS glued slats under styrofoam stacks - Automatic stacker/palletizer for forming columns up to 3 meters high and max length 3 meters - Vertical automatic stretch wrapper for columns of EPS bundles - Includes inkjet printers and automatic labellers - Siemens S7 PLC controller Lodouct Upopfx Adweai - Complete with protective barriers and safety switches - High-efficiency line, in very good condition, floor space required approx. 600 m² (40m x 15m) - Year of manufacture: 2003 - Power requirement: 400V; 50 Hz; 115 kW; 300A

Kondisi: bekas, Overhauled heavy-duty granulator, wear-protected Suitable for both dry and wet size reduction Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with replaceable knife mounts Drive power: 160-250 kW Laodpfsxgrdfex Adwei With forced feeding via 3 load-dependent, controlled feed screws Hydraulically tiltable, hydraulically swivelling screen basket Throughput capacity up to 5 t/h depending on material and particle size

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Ideal for shredding Styrofoam or similar materials Throughput highly dependent on screen size and input material: - Up to 60 kg/h with EPS using a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW - 400 Volt Robust steel construction Hardened cutting knives Screen with interchangeable inserts Available perforations: (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive equipped with star-delta switch, overload protection, and 8 m power cable, ready to plug in Discharge spout: 150 mm Optional for plastic or grain pipes Lodpfx Aeh S H T Uedwoai Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and one swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (L x W x H) Weight approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Kondisi: bekas, Heavy-duty cutting mill Ljdpfoxgthljx Adwoai Manufacturer: NETZSCH CONDUX Model: CS 500/600-4 Feed opening: approx. 600 x 600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor: 75 kW

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding both hardwood and softwood. Lasdpfx Adswzarcowsi Motor: 15 kW; 400 V - 50 Hz - 3-phase Knives: 14 pieces, 40x40 mm, reversible multiple times Rotor diameter: 260 mm Control: PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 cbm Hydraulically operated pusher Screen perforation size as needed (12 - 40 mm) Extraction nozzle Ø 160 mm Weight: approx. 1,100 kg Dimensions (LxWxH): approx. 1805 x 1118 x 1650 mm Color: blue / grey The following options are available at an extra charge: - Machine elevation by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will cause increased wear. We are happy to offer a free trial with your material. We invite you for this purpose to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight forwarder and we will document the test with photos and videos.

Kondisi: bekas, CONDUX CS 500/600-II/III A Cutting Mill / Granulator Drive motor: 37 kW (upgradeable to 75 kW) Rotor diameter: 500 mm Rotor width: 600 mm Feed opening: 500 x 600 mm Lajdpfsxgrd Eex Adwoi 5 knives, angled cut Swing-open housing with 2 stationary knives.

Kondisi: baru, Tahun pembuatan: 2025, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide range of materials such as all types of residual wood, softwood, chipboard and fibreboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by a robust construction, ensuring consistent quality in continuous operation. We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a shipping company, and we will document the test with photos and videos. Machine Data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput rate 1 - 5 hopper fillings / h, Hydraulically operated pusher, Screen perforation of choice (10 - 40mm), Extraction port Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta start • Automatic shutdown when rotor runs idle • Removable extraction chute • Speed 70 - 100 rpm for increased throughput • Intermittent control to avoid idle times • Performance-enhancing step control of hydraulic pusher • Robust guides for the hydraulic pusher Additional shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Lsdpfx Aded Db N Ijwoai Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - The moisture content (a.d.) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: bekas, CONDUX CS 500/1000 cutting mill / cutting mills Multi-knife mill with 16-knife rotor 6 stator knives Lajdpfxsxgrn Rs Adwei Drive motor: 90 kW With accessories

Kondisi: baru, Tahun pembuatan: 2025, Your benefits: + Extremely large cutting unit opening: 1300x1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW starting power Technical specifications: Top feed opening (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 *Other kW options available on request, e.g. 30 kW for softwood Lajdpfx Ajgbkkrjdwji Screen perforation (mm): 10 - 40, selectable Tools: 37/70 knives Extraction nozzle diameter (mm): 200 mm Dimensions (LxWxH): 2430x2410x1735 mm Weight (approx. kg): 3,500 Optional at additional cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (all material thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Slider extension option *Available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the upper cutting unit opening is 1300x1700 mm, surcharge: + €12,975) *Significantly longer lead time. *Larger machines available on request --- Raw material requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: bekas, CONDUX CS 450/600-2 cutting mill Hollow-body cutting mill and secondary cutting mill for pre-shredded material. Rotor diameter: 450 mm Rotor width: 600 mm 3 rotor knives (angled cut), 2 stator knives Lodpfx Adoxgrx Newsai Drive motor: 22 kW